MTPX-MF-SA
MTPXBK-MF-SA, MTPXS-MF-SAINSTALLER's manual

SPECIFICATIONS

Tus neeg siv muaj peev xwm:	Unlimited
Daim npav hom:	Mifare Classic 1K, 4K
Nyeem ntau:	Txog li 6 cm
Cov zis:	1 x Relay 2A; 24V AC / DC
Xauv lub sijhawm tso tawm:	1-255 sec. los yog Toggle (ON/OFF) hom
Kev Ua Haujlwm Voltage:	12v dc ua
Kev siv tam sim no:	Max. 150 mA ua
Kev khiav hauj lwm kub:	-20 ° C rau + 50 ° C
Kev tiv thaiv tus qauv:	IP65
Qhov ntev (hli):	92 L x 51 W x 27 H (ABS)
Kev them nyiaj yug software:	PROA MS, PROH MS
Txheej xwm nco:	3500 xwm
Blacklist peev	1100
Event Collection:	Los ntawm Event Collect Card
Push khawm Input:	Ib
Configuration:	Los ntawm programming cards tsim siv softwarand USB desktop nyeem ntawv
Credit ntawm daim npav:	Yog lawm
Compatible nrog:	RU1, RU2, RTT thiab DINRTT

Taw qhia

MTPX-MF-SA yog tus nyeem ntawv offline rau kev tswj xyuas. Tus nyeem ntawv tuaj yeem teeb tsa los ntawm daim npav teeb tsa. Kev muab daim npav neeg siv yog ua los ntawm software nrog desktop usb card nyeem ntawv. Cov cai nkag tau raug sau rau hauv daim npav neeg siv nws tus kheej. Tus nyeem ntawv tuaj yeem siv nrog PROA MS lossis PROH MS Software. Kev sau cov xwm txheej yav dhau los tuaj yeem ua tiav los ntawm Event collect card.

CONFIGURATION nrog USB

Nco tseg: Micro USB Cable yog muab nrog PROX-USB Desktop nyeem ntawv

CONFIGURATION nrog CARD

MUAB

Roj hmab gasket

Pem hauv ntej

Rov qab
Mounting puag (yeem)

THAWJ

PB	Nias khawm
T1	Tampkev tiv thaiv
T2	Tampkev tiv thaiv
+ 12 V	Fais fab mov
GND	Hauv av
TSIS MUAJ	TSIS tso zis
COM	COM tso zis
NC	NC tso zis
A	Ib txoj kab kev sib txuas lus
B	B kev sib txuas lus

TXOJ CAI (READER nkaus xwb)

Tus nyeem ntawv nkaus xwb

Pairing nyeem ntawv nrog RU2

Nyeem ntawv + chaw taws teeb relay

1. Muab lub Jumper rau qhov chaw kaw. RU2 beeps tsis tu ncua thiab cov liab coj ntsais muag.
2. Muab lub Jumper rau qhib txoj hauj lwm.
3. Tos rau Green LED + OK Beep (luv + luv + ntev beep)
4. Tom qab OK beep, lub coupling yog ua tiav.

PAIRING nyeem ntawv nrog RTT

1. Muab Dipswitch No.1 rau qhov chaw ON. RTT beeps tsis tu ncua thiab cov liab coj blinks.
2. Muab Dipswitch No.1 rau qhov chaw OFF.
3. Tos rau Green LED + OK Beep (luv + luv + ntev beep)
4. Tom qab OK beep, lub coupling yog ua tiav.

PairING nyeem ntawv nrog DINRTT

1. Kaw lub Jumper. DINRTT beeps tsis tu ncua thiab cov liab coj blinks.
2. Qhib lub Jumper
3. Tos rau Green LED + OK Beep (luv + luv + ntev beep)
4. Tom qab OK beep, lub coupling yog ua tiav.

RESET tus nyeem ntawv

1. Tig lub Dipswitch pin1 ON.
2. Tos rau ntau lub suab nrov luv luv + Liab LED ntsais.
3. Tig lub Dipswitch pin1 OFF. (Beeps luv luv yuav nres)
4. Tos rau ntsuab LED ntsais + beep.

Ceeb toom: Cov txheej txheem pib dua yuav tshem tawm cov cuab yeej los ntawm Access Software thiab nws yuav tshem tawm cov teeb tsa, cov xwm txheej thiab cov ntawv teev npe dub.
Ceeb toom: Cov txheej txheem no yuav unpair lub txuas txuas relay unit (RTT, DINRTT lossis RU2)

SIV tus nyeem ntawv

MTPX-MF-SA los ntawm lub neej ntawd TSIS TSIS nyeem phaib thiab lub teeb rov qab yog OFF. Yuav kom tus nyeem ntawv yuav tsum tau muab tso rau hauv lub lag luam, tus nyeem ntawv yuav tsum tau pib ua ntej (los ntawm Init Card los yog ntawm USB kev twb kev txuas) thiab ces User Cards yuav tsum tau muab.
Txhawm rau pib tus nyeem ntawv thiab muab daim npav neeg siv hauv PROA MS Software:

1. Mus rau "Qhov Rooj", teeb tsa lub qhov rooj thiab txuag nws.
2. Muab ib daim npav rau ntawm USB Desktop nyeem ntawv thiab muab "Init Card".
3. Muab daim npav Init rau ntawm tus nyeem ntawv, lub teeb ntsuab thiab ob lub suab nrov luv luv qhia tias tus nyeem ntawv tau pib ua tiav.
4. Mus rau "Cov neeg siv", nyem rau ntawm "Ntxiv", teeb tsa cov kev txwv ntawm tus neeg siv thiab txuag nws.
5. Muab lwm daim npav rau ntawm USB Desktop nyeem ntawv thiab muab daim npav neeg siv. Txij thaum ntawd los, tus neeg siv daim npav tuaj yeem siv tau thiab tus nyeem ntawv yuav teb rau kev nthuav qhia daim npav nrog kev nkag mus tau lossis nkag tsis pom thiab pom ntsuab / liab.

Txhawm rau pib tus nyeem ntawv thiab muab daim npav qhua hauv PROH MS Software:

1. Mus rau "Manage/Guest Rooms", teeb qhov tsis muaj qhov rooj thiab txuag nws.
2. Muab ib daim npav rau ntawm USB Desktop nyeem ntawv thiab muab "Init Card".
3. Muab daim npav Init rau ntawm tus nyeem ntawv, lub teeb ntsuab thiab ob lub suab nrov luv luv qhia tias tus nyeem ntawv tau pib ua tiav.
4. Xaiv chav tsev los ntawm lub vijtsam tseem ceeb thiab nyem rau ntawm "Check IN" lossis ob npaug nyem rau ib chav. Muab lub npe ntawm tus qhua, tus lej hla tebchaws, hnub tuaj txog / tawm mus thiab nias lub pob "Check In".
5. Muab lwm daim npav rau ntawm USB Desktop nyeem ntawv thiab muab daim npav qhua. Txij thaum ntawd los, daim npav qhua tuaj yeem siv tau thiab tus nyeem ntawv yuav teb rau kev nthuav qhia daim npav nrog kev nkag mus lossis nkag tsis pom thiab pom ntsuab / liab.

Cov khoom no ua raws li cov kev cai ntawm EMC directive 2014/30/EU, Xov tooj cua Equipment Directive 2014/53/EU. Tsis tas li ntawd nws ua raws li RoHS2 cov lus qhia EN50581: 2012 thiab RoHS3 Cov Lus Qhia 2015/863 / EU.

www.xprgroup.com ua

Cov ntaub ntawv / Cov ntaub ntawv

xpr MTPX-MF-SA Offline Reader rau Kev Siv Daim Ntawv Thov [ua pdf] Daim ntawv qhia kev teeb tsa MTPX-MF-SA, MTPX-MF-SA, MTPXBK-MF-SA, MTPXS-MF-SA, MTPX-MF-SA Offline Reader rau Access Applications, MTPX-MF-SA, Offline Reader rau Access Applications, Reader rau Access Applications, Access Applications, Applications

Cov ntaub ntawv

• Cov neeg siv phau ntawv