WMD Subway 8 Input 1 Output Scanning Crossfader

Subway yog qhov ntse crossfader rau ntau lub cim uas peb tsis paub tias peb xav tau. Yim lub tswv yim uas txhua tus tuaj yeem hla dhau pob tshab hauv analog los ntawm cov ntse digital tswj interface. Kev siv rau Subway yog qhov kawg. Ua kom muaj peev xwm ua kom lub cev muaj zog ntawm koj lub oscillator (s) lossis tig ib qho module nrog ntau qhov kev tawm mus rau hauv qhov kev sib txuas tsis tu ncua. Subway yuav pom ntau yam siv hauv koj lub khib.

FUNCTION

• OUT (Jack & LED): Output ntawm lub crossfader. Bicolor LED rau cov teeb liab bipolar.
• Cov tswv yim: DC txuas inputs rau cov teeb liab uas koj xav luam theej duab.
• FADE CURVES: Subway muaj 3 qhov kev xaiv crossfade nkhaus. Xaiv qhov nkhaus los tuav ib qho ntawm cov nyees khawm hauv qab no thaum pib:
  1.  Tawm
  2. Exponential
  3. Sib npaug zog
• SCAN (Knob & CV Input): Scans los ntawm cov inputs uas enabled. Lub potentiometer dhau los ua tus attenuator thaum CV siv rau lub tsho.
• LEEJ TWG: Cov nyees khawm uas pab txhawb thiab lov tes taw cov tswv yim cuam tshuam. Thaum ib qho kev tawm tswv yim raug kaw, lub teeb liab yuav raug tshem tawm ntawm lub scanning crossfade.

TSEEM CEEB

• Loj: 6hp ib
• Qhov tob: 38mm (nrog cables)
• Lub zog: +80mA, -22mA 100k ohm input / CV impedance 1k ohm tso zis impedance 20Vpp ntau yam
• Nco: Pem hauv ntej vaj huam sib luag teeb tsa txuag rau EEPROM 1 feeb tom qab nias lub pob kawg.
• Digitally tswj analog teeb liab txoj kev ua haujlwm ntawm 48kHz

Cov ntaub ntawv / Cov ntaub ntawv

WMD Subway 8 Input 1 Output Scanning Crossfader [ua pdf] Tus tswv phau ntawv Subway 8 Input 1 Output Scanning Crossfader, Subway, 8 Input 1 Output Scanning Crossfader, Scanning Crossfader, Crossfader

Cov ntaub ntawv

• Cov neeg siv phau ntawv