VisionTek VT2600 Multi Display MST Dock

 

Cov ntaub ntawv khoom

VT2600 yog qhov chaw nres tsheb docking uas tso cai rau koj hloov koj lub laptop mus rau hauv chaw ua haujlwm. Nws tuaj yeem txuas mus txog 3 cov lus pom, nrog 2 x 4K @ 30Hz thiab 1 x 1920 x 1080 @ 60Hz daws teeb meem (nyob ntawm tus tswv tsev). Lub chaw nres tsheb kuj tseem ntxiv cov chaw nres nkoj USB, tso cai rau koj them koj lub xov tooj ntawm tes thiab xa mus txog 100W ntawm lub zog rau koj lub laptop los ntawm ib qho yooj yim USB-C Cable.

Nta

• Txuas mus txog 3 qhov kev qhia
• 2 x 4K @ 30Hz thiab 1 x 1920 x 1080 @ 60Hz daws teeb meem (nyob ntawm tus tswv tsev)
• Ntxiv USB ports
• Them cov khoom siv mobile
• Xa mus txog 100W ntawm lub zog rau lub laptop los ntawm ib qho yooj yim USB-C Cable

Cov lus qhia siv khoom

Cov Kev Xav Tau

Lub VT2600 tau sib xws nrog lub kaw lus uas muaj USB-C chaw nres nkoj txhawb nqa DisplayPort tshaj USB-C (DP Alt Mode MST) rau kev yees duab lossis MacBook nrog USB-C chaw nres nkoj uas txhawb nqa DisplayPort tshaj USB-C (DP Alt Mode SST) rau yees duab. Rau USB-C them, lub kaw lus nrog USB-C chaw nres nkoj uas txhawb nqa USB-C Fais Fab Xa 3.0 yog xav tau. Cov kev khiav hauj lwm nruab nrog lub chaw nres tsheb docking yog Windows 11, 10, 8.1, 8, 7, thiab macOS 10.12 lossis Tom qab. Qhov siab tshaj plaws daws teeb meem thiab tus naj npawb ntawm cov kev nthuav qhia txuas ntxiv yog nyob ntawm tus tswv system specifications.

Chaw nres tsheb Docking Ports

Lub chaw nres tsheb docking muaj cov chaw nres nkoj hauv qab no:

• USB-C 3.1 Gen 2 Chaw nres nkoj
• USB-A 3.1 Gen 2 Chaw nres nkoj
• USB-A 3.1 Gen 2 Ports
• SD/microSD Card nyeem ntawv
• Audio Jack
• Hloov fais fab
• RJ45 Gigabit Ethernet
• HDMI 1.4 Chaw nres nkoj (DP Alt Hom)
• DP 1.4 Chaw nres nkoj (DP Alt Mode)
• DP 1.4 Chaw nres nkoj (DP Alt Mode)
• HDMI 2.0 Chaw nres nkoj (DP Alt Hom)
• USB-C 3.1 Gen 2 Ports
• 20V DC fais fab mov hauv
• Kensington Security Slot
• USB-C Host Upstream Chaw nres nkoj
  Nco ntsoov tias qhov kev daws teeb meem siab tshaj plaws rau ib qho zaub yog 4K @ 60Hz, tab sis qhov kev daws teeb meem siab tshaj plaws yog nyob ntawm tus tswv tsev specifications.

Kev teeb tsa chaw nres tsheb Docking

Txhawm rau txuas cov khoom siv hluav taws xob, ntsaws lub hwj chim adapter rau hauv 20V DC Fais Fab Hauv qhov chaw nres nkoj ntawm sab nraum qab ntawm qhov chaw nres nkoj thiab txuas rau lwm qhov kawg rau lub qhov hluav taws xob. Nco ntsoov tias cov khoom siv hluav taws xob yuav tsum tau ua haujlwm rau cov khoom siv. Txhawm rau txuas koj tus tswv tsev ntaus ntawv, txuas nrog USB-C cable mus rau USB-C Host chaw nres nkoj ntawm sab ntawm VT2600 thiab txuas rau lwm qhov kawg rau koj lub laptop, PC lossis Mac. Qhov chaw nres tsheb docking muaj cov kev daws teeb meem siab DP thiab HDMI cov zis, nrog rau kev daws teeb meem txog 3840 x 2160 @ 60Hz txhawb nqa nyob ntawm cov saib txuas nrog thiab lub peev xwm ntawm tus tswv tsev.

SAFETY CEEB TOOM

• Nco ntsoov nyeem cov lus qhia kev nyab xeeb kom zoo.
• Khaws Cov Neeg Siv Phau Ntawv Qhia rau yav tom ntej siv.
• Khaws cov cuab yeej no kom deb ntawm cov av noo.
• Yog tias muaj xwm txheej hauv qab no tshwm sim, kom cov cuab yeej kuaj xyuas los ntawm tus kws kho mob tam sim ntawd:
  • Cov khoom siv tau raug cov dej noo.
  • Cov cuab yeej muaj qhov pom tseeb ntawm kev tawg.
  • Cov cuab yeej siv tsis tau ua haujlwm zoo lossis koj tsis tuaj yeem ua haujlwm raws li phau ntawv no.

COPYRIGHT XEEM

Tsis muaj ib feem ntawm qhov kev tshaj tawm no yuav raug muab luam tawm hauv ib daim ntawv los ntawm ib qho twg yam tsis tau kev tso cai ua ntej. Tag nrho cov cim lag luam thiab cov npe khoom lag luam tau hais hauv no yog cov cim lag luam lossis cov npe lag luam ntawm lawv cov tuam txhab.

TSIS TXAUS SIAB

Cov ntaub ntawv hauv daim ntawv no yuav raug hloov pauv yam tsis tau ceeb toom. Cov chaw tsim khoom tsis ua ib qho kev sawv cev lossis kev lees paub (qhia los yog lwm yam) hais txog qhov raug thiab ua tiav ntawm cov ntaub ntawv no thiab yuav tsis muaj qhov tshwm sim rau kev poob nyiaj lossis kev lag luam puas tsuaj, suav nrog tab sis tsis txwv rau qhov tshwj xeeb, xwm txheej, qhov tshwm sim, los yog lwm yam kev puas tsuaj.

WEEE DIRECTIVE & PRODUCT DISPOSAL
Thaum kawg ntawm nws lub neej siv tau, cov khoom no yuav tsum tsis txhob raug kho raws li tsev neeg lossis cov khoom pov tseg. Nws yuav tsum raug xa mus rau qhov chaw sau khoom siv rau kev rov ua dua ntawm cov khoom siv hluav taws xob lossis xa rov qab mus rau tus neeg muag khoom pov tseg.

Taw qhia

Hloov koj lub laptop mus rau hauv chaw ua haujlwm. Txuas mus txog 3 cov lus qhia, 2 x 4K @ 30Hz, 1 x 1920 x 1080 @ 60Hz (nyob ntawm tus tswv tsev). Nthuav koj lub peev xwm laptop - ntxiv USB ports, them koj cov khoom siv mobile thiab xa mus txog 100W ntawm lub zog rau koj lub laptop los ntawm ib qho yooj yim USB-C Cable.

NTA

• Tau tshaj USB-C DP Alt Mode systems
• USB-C fais fab xa mus txog 100W
• USB-C Power Delivery mobile ntaus ntawv them nyiaj mus txog 30W
• Txhawb nqa txog li 3 Qhia ntawm DP Alt Hom
• Txhawb kev ncua thiab mirrored hom
• USB 3.2 Gen 2 10Gbps USB-A / USB-C chaw nres nkoj
• SD/microSD Card nyeem ntawv
• Gigabit Ethernet
• Standard thiab Nano Kensington Lock Support

TSEEM CEEB

• VT2600 Multi-Display MST Dock
• 150W Hwj Hwj Adapter
• USB-C rau USB-C Cable
• Cov neeg siv phau ntawv

SYSTEM YUAV TSUM

Compatible Devices
Qhov system nrog USB-C chaw nres nkoj uas txhawb nqa DisplayPort tshaj USB-C (DP Alt Mode MST) rau kev yees duab lossis MacBook nrog USB-C chaw nres nkoj uas txhawb nqa DisplayPort tshaj USB-C (DP Alt Mode SST) rau kev yees duab
Rau USB-C them, lub kaw lus nrog USB-C chaw nres nkoj uas txhawb nqa USB-C Fais Fab Xa 3.0 yog xav tau

Kev Ua Haujlwm
Windows 11, 10, 8.1, 8, 7
macOS 10.12 lossis tom qab ntawd

* Nco tseg: Qhov kev daws teeb meem siab tshaj plaws thiab tus naj npawb ntawm cov kev nthuav qhia txuas ntxiv yog nyob ntawm tus tswv system specifications.

DOCKING STATION PORTS

Chaw nres nkoj	Kev piav qhia
1. USB-C 3.1 Gen 2 Chaw nres nkoj	Txuas USB-C ntaus ntawv, txhawb 10Gbps hloov ceev PD3.0 5V / 3A, 9V / 3A, 12V / 2A, 20V / 1.5A; 30 W Max
2. USB-A 3.1 Gen 2 Chaw nres nkoj	Txuas lub USB-A ntaus ntawv, txhawb 10Gbps hloov ceev, mus txog 7.5W them
3. USB-A 3.1 Gen 2 Ports	Txuas lub USB-A ntaus ntawv, txhawb 10Gbps hloov ceev, mus txog 4.5W them
4. SD/microSD Card Reader	SD 4.0 daim npav nyeem ntawv 312MB / s, microSD 3.0 daim npav nyeem ntawv 104MB / s
5. Suab Jack	Txuas lub mloog pob ntseg, lub mloog pob ntseg lossis lwm yam khoom siv nrog 3.5mm connector
6. Fais fab hloov	Fais fab Hloov nrog LED qhov taw qhia teeb
7. RJ45 Gigabit Ethernet	Txuas lub network router lossis modem ntawm 10/100/1000 Mbps
8. HDMI 1.4 Chaw nres nkoj (DP Alt Hom)	Zaub 3 - Txuas cov zaub nrog HDMI chaw nres nkoj kom kwj video mus txog 4K @ 30Hz *
9. DP 1.4 Chaw nres nkoj (DP Alt Mode)	Zaub 2 - Txuas cov zaub nrog DP chaw nres nkoj kom kwj video mus txog 4K @ 60Hz *
10. DP 1.4 Chaw nres nkoj (DP Alt Mode)	Zaub 1 - Txuas cov zaub nrog DP chaw nres nkoj kom kwj video mus txog 4K @ 60Hz *
11. HDMI 2.0 Chaw nres nkoj (DP Alt Hom)	Zaub 1 - Txuas cov zaub nrog HDMI chaw nres nkoj kom kwj video mus txog 4K @ 60Hz *
12. USB-C 3.1 Gen 2 Ports	Txuas lub USB-C ntaus ntawv, txhawb 10Gbps hloov ceev, mus txog 7.5W them
13. 20V DC fais fab mov hauv	Txuas cov suav nrog 150W 20V / 7.5A Fais Fab
14. Kensington Security Slot	Txuas tus qauv lossis nano Kensington Lock kom ruaj ntseg chaw nres tsheb
15. USB-C Host Upstream Chaw nres nkoj	Txuas mus rau lub laptop lossis PC, mus txog 10 Gbps rau tus tswv, DP Alt Mode Video thiab USB-C Fais fab xa tuaj them txog 100W

* Ceeb toom: 4K @ 60Hz max ib qho kev daws teeb meem, qhov kev daws teeb meem siab tshaj plaws nyob ntawm tus tswv tsev specifications.

DOCKING STATION SETUP

Txuas fais fab

1. Txuas lub hwj chim adapter rau hauv 20V DC Power Nyob rau hauv chaw nres nkoj nyob tom qab ntawm qhov chaw nres nkoj. Txuas qhov kawg rau hauv lub qhov hluav taws xob.
   Nco tseg: Cov khoom siv hluav taws xob yuav tsum muaj rau kev ua haujlwm dock.

   

Kev sib txuas Systems

1. Txuas nrog USB-C cable rau USB-C Host chaw nres nkoj ntawm sab ntawm VT2600. Txuas qhov kawg rau koj lub laptop, PC lossis Mac.
2. Lub VT2600 muaj cov kev daws teeb meem siab DP thiab HDMI tso tawm. Kev daws teeb meem txog 3840 x 2160 @ 60Hz tau txais kev txhawb nqa nyob ntawm cov saib txuas nrog thiab lub peev xwm ntawm tus tswv tsev.

   

Kev teeb tsa ib qho zaub

1. Txuas koj lub monitor rau Display 1 – DisplayPort lossis HDMI, Display 2 – DisplayPort lossis Display 3 – HDMI.

   
   Nco tseg: Tso tawm 1, 2 thiab 3 tso zis video ntawm USB-C DP Alt Hom thiab tsuas yog tso tawm cov yeeb yaj kiab thaum txuas nrog lub tswv tsev nrog cov yam ntxwv no.

Dual Display Teeb

1. Txuas Display 1 mus rau Display 1 – DisplayPort lossis HDMI.
2. Txuas Display 2 mus rau Zaub 2 – DisplayPort lossis Display 3 – HDMI.

   Nco tseg: Rau kev ua tau zoo tshaj plaws txuas rau Display 1 thiab Display 2 inputs.

Triple Display Teeb

1. Txuas zaub 1 mus rau Zaub 1 DisplayPort lossis HDMI.
2. Txuas zaub 2 mus rau Zaub 2 DisplayPort.
3. Txuas zaub 3 rau Display 3 HDMI.

   

Txhawb kev daws teeb meem

TSEEM CEEB

Zaub kev sib txuas	DP los yog HDMI
Hwm System DP 1.2	3840 x 2160 @ 30Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz
Hwm System DP 1.4	3840 x 2160 @ 60Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz
Hwm System DP 1.4 MST + DSC	3840 x 2160 @ 60Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz
macOS (Intel, M1, M2)	3840 x 2160 @ 60Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz

DUAL DISPLAY

Zaub kev sib txuas	DP + DP lossis DP + HDMI
Hwm System DP 1.2	1920 x 1080 @ 60Hz
Hwm System DP 1.4	3840 x 2160 @ 30Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz
Hwm System DP 1.4 MST + DSC	3840 x 2160 @ 30Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz
macOS (Intel)	3840 x 2160 @ 30Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz (1 Ntxiv + 1 Cloned)
macOS (M1, M2)	3840 x 2160 @ 60Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz (1 Ntxiv + 1 Cloned)

QHOV TSEEB

Zaub kev sib txuas	DP + DP + HDMI
Hwm System DP 1.2	N/A
Hwm System DP 1.4	N/A
Hwm System DP 1.4 MST + DSC	(2) 3840 x 2160 @ 30Hz, (1) 1920 x 1080 @ 60Hz
macOS (Intel)	3840 x 2160 @ 30Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz (1 Ntxiv + 2 Cloned)
macOS (M1, M2)	3840 x 2160 @ 60Hz / 2560 x 1440 @ 60Hz / 1920 x 1080 @ 60Hz (1 Ntxiv + 2 Cloned)

Nco tseg: Txhawm rau txuas ntxiv cov zis mus rau 3 cov lus qhia thiab muaj cov yeeb yaj kiab tso tawm los ntawm tus tswv system, tus tswv tsev yuav tsum muaj kev txhawb nqa rau USB-C DP Alt Hom DP1.4 W / MST thiab DSC (Display Stream Compression). Tus tswv tsev nrog DP 1.3 / DP 1.4 tuaj yeem txuas ntxiv mus txog 3 cov lus qhia nrog lub laptop zaub tsis taus. Tus naj npawb ntawm cov kev txhawb nqa thiab cov kev daws teeb meem siab tshaj plaws yog nyob ntawm tus tswv tsev specifications.

DISPLAY SETTINGS (Windows)

Windows 10 - Kev teeb tsa

1. Txoj nyem rau ntawm txhua qhov chaw qhib ntawm koj lub desktop thiab xaiv "Display Settings"

   Kev teeb tsa.

2. Hauv "Display", xaiv cov khoom xav tau uas koj xav kho. Nyem thiab luag cov zaub xaiv rau koj nyiam kev npaj
   Extending lossis Duplicating Displays
3. Scroll down mus rau "Muaj ntau cov duab" thiab xaiv hom nyob rau hauv daim ntawv teev npe uas haum koj xav tau
   Kho kev daws teeb meem
4. Txhawm rau kho qhov kev daws teeb meem xaiv koj qhov kev daws teeb meem xav tau los ntawm cov npe txhawb nqa hauv qab "Display daws teeb meem"
   Kho qhov Refresh Rate
5. Rau qhov refresh npaum li cas ntawm cov khoom txuas nrog nyem rau ntawm "Advanced zaub nqis"
6. Xaiv cov zaub koj xav kho los ntawm cov ntawv qhia zaub mov nco-down saum toj
7. Nyob rau hauv "Refresh Rate" xaiv los ntawm cov kev txhawb nqa refresh tus nqi hauv cov ntawv qhia zaub mov

   

AUIDO SETUP (Windows)

Windows 10 - Kev teeb tsa suab

1. Txoj nyem rau ntawm tus hais lus icon nyob rau sab xis ces kaum thiab xaiv "Qhib suab nqis"

   

DISPLAY SETTINGS (macOS)

Thaum cov zaub tshiab txuas nrog koj Mac, nws yuav ua li ntawd txuas mus rau sab xis ntawm lub ntsiab zaub. Txhawm rau teeb tsa cov kev teeb tsa rau txhua qhov ntawm koj cov lus qhia, xaiv "Displays" los ntawm "System Preferences" zaub mov. Qhov no yuav qhib qhov "Display Preferences" qhov rai ntawm txhua qhov ntawm koj cov lus tso cai rau koj los teeb tsa txhua qhov.

Zaub Preferences:

• Zaub daws teeb meem
• Rotating Display
• Tso cov haujlwm
• Tso rau daim iav hom
• Tso rau Extend
• Siv ob qho tib si ncua thiab mirrored zaub
• Hloov lub ntsiab zaub

  

1. Txhawm rau npaj cov lus qhia thiab teeb tsa cov duab tsom iav lossis txuas ntxiv nyem rau ntawm qhov tab tab.
2. Txhawm rau txav ib qho zaub, nyem thiab luag cov zaub hauv qhov kev teeb tsa qhov rai.
3. Txhawm rau hloov cov zaub thawj, nyem rau ntawm qhov me me nyob rau sab saum toj ntawm lub vijtsam tseem ceeb thiab luag rau hauv lub saib koj xav ua thawj.

   

FAQ

Q1. Vim li cas kuv tsis pom qhov thib peb saib thaum kuv teeb tsa hom triple zaub?
A1. Kauj ruam 1: Xaiv lub ntsiab zaub

1. Right-click rau koj lub desktop thiab xaiv "Display Settings"
2. Xaiv cov zaub uas tsis yog koj lub laptop zaub los ntawm cov zaub layout thiab nqes mus rau "Ntau yam zaub".

   
3. Kos “Ua qhov no kuv lub ntsiab zaub”.

   

Kauj ruam 2: Disconnect laptop zaub

1. Xaiv lub laptop zaub ("1" yog lub neej ntawd zaub rau lub laptops) thiab nqes mus rau "Multiple displays".
2. Xaiv "Disconnect this display", ces lub laptop zaub vaj huam sib luag yuav raug txiav.

   
3. Kauj Ruam 3: Qhib qhov thib peb saib / tso saib
   1. Xaiv qhov seem saib los ntawm "Display" layout nyob rau sab saum toj ntawm lub qhov rais, ces scroll down mus rau "Multiple displays".
   2. Xaiv "ntev desktop rau cov zaub no" txhawm rau ua kom cov zaub no.

Q2. Vim li cas kuv 2K thiab 4K saib pom txawv txav thaum kuv ua kom pom dual lossis triple zaub hom?
A2. Qhov kev daws teeb meem ntawm qee qhov kev saib xyuas yuav tsis hloov kho tau thiab "Active teeb liab daws teeb meem" los ntawm Windows teeb tsa "Display daws teeb meem" yuav tsis phim. Nco ntsoov muab qhov kev daws teeb meem rau tib tus nqi kom tau txais txiaj ntsig zoo tshaj plaws.

1. Right-click rau ntawm Desktop thiab xaiv "Display Settings"

   
2. Xaiv koj lub monitor los ntawm ntu "Display" thiab nyem rau ntawm nws. Scroll down thiab xaiv "Advanced zaub nqis"
3. Nco ntsoov tias qhov kev daws teeb meem muaj nqis rau txhua tus saib ntawm "Desktop daws teeb meem" thiab "Active signal resolution" match.

   
4. Nyem rau ntawm "Display adapter properties for Display 2" thiab txo qhov kev daws teeb meem rau tus nqi yog tias ob qhov txiaj ntsig sib txawv.

   

Q3. High Dynamic Range (HDR) yog dab tsi?
A3. High Dynamic Range (HDR) tsim kom muaj kev ua neej zoo dua los ntawm kev tso cov khoom ci xws li lub teeb thiab cov ntsiab lus ci ntsa iab ntawm cov khoom ci ci kom pom ntau dua li lwm yam khoom hauv qhov chaw. HDR kuj tso cai rau kom paub meej ntxiv hauv qhov tsaus ntuj. Muaj tseeb HDR playback tseem tsis tau muaj nyob rau hauv cov lus qhia ua ke ntawm feem ntau lub laptops thiab ntsiav tshuaj. Ntau lub TV thiab PC saib tau pib suav nrog ua hauv DR-10 nrog HDCP2.2 txhawb nqa. Qee qhov tseem ceeb ntawm HDR cov ntsiab lus suav nrog.

• Streaming HDR (ex. YouTube) & streaming hwm HDR (ex. Netflix)
• Local HDR Video Files
• ULTRA HD Blue-Ray
• HDR ua si
• HDR cov ntsiab lus tsim cov apps

Tsis tas li, yog tias koj xav tau kwj HDR cov ntsiab lus nrog cov ntawv thov xws li Netflix thiab YouTube, nco ntsoov hauv Windows 10 "kwj HDR Video" teeb tsa "nyob" hauv "Video Playback" nplooj ntawv teeb tsa.

Q4. Vim li cas nws thiaj qhia "slow charging" ntawm kuv lub laptop.
A4. Qee tus neeg siv yuav pom tias qhov xwm txheej them nyiaj qhia tau tias "slow charging", qhov no yuav tshwm sim rau cov laj thawj hauv qab no.

• Lub charger tsis muaj zog txaus los them koj lub PC. Qhov no feem ntau tshwm sim yog tias lub hwj chim ntawm koj lub cev muaj ntau dua 100W.
• Lub charger tsis txuas nrog lub charger ntawm koj lub PC. Xyuas koj cov ntaub ntawv systems. Qee lub laptops tsuas yog txhawb nqa USB-C Fais Fab Xa los ntawm cov chaw nres nkoj tshwj xeeb.
• Lub charger cable tsis ua tau raws li qhov xav tau ntawm lub zog rau lub charger lossis PC. Nco ntsoov siv 100W ntawv pov thawj USB-C cable uas suav nrog koj cov khoom siv.

CEEB TOOM

FCC nqe lus
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:

1. Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam, thiab
2. Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau.

Ceeb toom: Cov kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm pawg neeg saib xyuas kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.

CEEB TOOM: Cov khoom siv no tau sim thiab pom tias ua raws li qhov kev txwv rau ib hoob B cov cuab yeej digital, ua raws Ntu 15
ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev.
Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov khoom siv thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
• Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

Ceeb toom: Qhov twg shielded interface cables los yog accessories tau muab nrog rau cov khoom los yog teev ntxiv com-ponents los yog accessories nyob rau hauv lwm qhov chaw txhais tau tias yuav tsum tau siv rau lub installation ntawm cov khoom, lawv yuav tsum tau siv nyob rau hauv thiaj li yuav ua tau raws li FCC. Kev hloov lossis hloov kho rau cov khoom lag luam tsis pom zoo los ntawm VisionTek Cov Khoom, LLC tuaj yeem ua rau koj txoj cai siv lossis ua haujlwm ntawm koj cov khoom los ntawm FCC.

Daim ntawv qhia IC: CAN ICES-003 (b) / NMB -003 (B)
Cov cuab yeej no ua raws li Kev Lag Luam Canada daim ntawv tso cai-tsim RSS tus qauv (s). Kev khiav hauj lwm yog ua raws li ob qho xwm txheej hauv qab no: (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam, thiab (2) cov cuab yeej no yuav tsum lees txais kev cuam tshuam, suav nrog kev cuam tshuam uas yuav ua rau lub tshuab ua haujlwm tsis xav tau.

WARRANTY

VisionTek Products LLC, ("VisionTek") txaus siab lees paub rau tus neeg yuav khoom thawj ("Warrantee") ntawm Cov Khoom Siv ("Cov Khoom"), tias cov khoom yuav tsis raug tsim los ntawm cov khoom tsis zoo rau ob (3) Xyoo thaum muab ib txwm siv thiab tsim nyog. Cov khoom yuav tsum tau sau npe nyob rau hauv 30 hnub txij li thawj hnub ntawm kev yuav khoom kom tau txais no 3 xyoo warranty. Txhua yam khoom tsis tau sau npe hauv 30 hnub tsuas yog tau txais 1-xyoo lav lav.
VisionTek qhov kev lav phib xaub nyob rau hauv qhov kev lees paub no, lossis kev sib txuas nrog lwm qhov kev thov hais txog cov khoom, tsuas yog siv rau kev kho lossis hloov pauv, ntawm VisionTek qhov kev xaiv, ntawm cov khoom lossis ib feem ntawm cov khoom uas tsis zoo hauv kev tsim khoom. Warranty assumes tag nrho cov kev pheej hmoo ntawm kev poob hauv kev thauj mus los. Cov khoom xa rov qab yuav yog ib qho khoom ntiag tug ntawm VisionTek. VisionTek lav cov khoom kho lossis hloov khoom yuav tsis pub dawb los ntawm kev tsim khoom tsis raug rau cov khoom seem ntawm lub sijhawm lav.
VisionTek muaj txoj cai los tshuaj xyuas thiab txheeb xyuas qhov tsis zoo ntawm cov khoom lossis ib feem ntawm cov khoom xa rov qab. Qhov warranty no tsis siv rau ib qho software tivthaiv.

FULL WARRANTY DISCLOSURE yog muaj nyob ntawm WWW.VISIONTEK.COM
Cov khoom yuav tsum tau sau npe nyob rau hauv 30 hnub ntawm kev yuav khoom rau lub warranty kom siv tau.
Yog tias koj muaj lus nug lossis xav tau kev pab nrog cov khoom no,
Hu Xov Tooj Pab 1 866-883-5411 Ib.
© 2023 VisionTek Products, LLC. Txhua txoj cai. VisionTek yog lub npe lag luam ntawm VisionTek Cov Khoom, LLC. Windows yog lub npe lag luam ntawm Microsoft Corporation hauv Tebchaws Meskas thiab lwm lub tebchaws. Apple® , macOS® yog lub cim lag luam ntawm Apple Inc., sau npe hauv Asmeskas thiab lwm lub tebchaws thiab cheeb tsam.

Txhim kho koj lub neej DIGITAL
Yog xav paub ntxiv, thov mus saib:
VISIONTEK.COM

Cov ntaub ntawv / Cov ntaub ntawv

VisionTek VT2600 Multi Display MST Dock [ua pdf] Tus neeg siv phau ntawv VT2600 Multi Display MST Dock, VT2600, VT2600 MST Dock, Multi Display MST Dock, Zaub MST Dock, Multi MST Dock, MST Dock, Dock

Cov ntaub ntawv

• Cov neeg siv phau ntawv