Tswj tag nrho
HDA-I/O
Tus tswv phau ntawv

HDA-I O HDA Input Output Stream Adapter

Qhia txog HDA-I/O
HDA-I/O Single-Zone Amplifier yog URC lub zog thiab tsis sib xws ampua neej nyob!
Cov ntaub ntawv no qhia txog cov yam ntxwv ntawm cov khoom, cov xwm txheej ntawm LED, kev teeb tsa yooj yim, thiab cov lus qhia dav dav ntawm cov lus qhia txuas.

Kev them nyiaj yug hauv internet:
Tag Nrho Kev Tswj yog muag ncaj qha nkaus xwb thiab yuav tsum tau teeb tsa / programmed los ntawm tus neeg siv ntawv pov thawj kev cai.
Kawg-Tus Neeg Siv Txhawb:
Mus ntsib URC Lub Tsev Nplooj Ntawv rau cov ntaub ntawv khoom lag luam, tus tswv phau ntawv qhia, thiab txhawb nqa cov ntaub ntawv tiv toj.
Hu rau kev txhawb nqa:
Total Control yog URC cov khoom muag ncaj qha nkaus xwb. Rau cov lus nug lossis kev pab hu rau koj tus Custom Installer/Programmer.
Kuv Installer/Programmer

Tshajview

URC's HDA-I/O Stream Receiver/Injector tsim lossis tau txais HDA suab ntws hla lub network. Cov cuab yeej no yuav tsum tau teeb tsa los ntawm cov ntawv pov thawj URC integrator los ua haujlwm raws li kwj Injector lossis kwj txais. Raws li Stream Injector, cov cuab yeej no faib cov suab sib txuas (digital lossis analog) hla lub network mus rau thaj chaw muaj HDA. Raws li tus kwj tau txais, HDA-I / O txuas rau koj nyiam 3rd tog lub cuab yeej thiab muab kev nkag mus rau tag nrho HDA ​​suab ntws ntawm lub network. HDA cov khoom tsis sib xws nrog URC cov cuab yeej cuab tam Total Control ampLub cev muaj zog (DMS).

Nta & Cov txiaj ntsig:

• kwj txais lossis kwj Injector Muaj peev xwm: Teeb tsa ntawm URC software, HDA-I / O tuaj yeem tau txais lossis xa HDA suab ntws hla lub network hauv zos.
• HDA Audio Stream: Raws li kwj Injector, cov cuab yeej no faib cov suab sib txuas rau txhua qhov muaj HDA tswj lub suab.
• Qhov Chaw Sib Koom: Txhua cheeb tsam tswj los ntawm HDA amplifier lossis I / O ntaus ntawv yuav tsum nkag mus rau lub kaw lus HDA Audio kwj.
• Flexible Zone Linking: Thaum txuas nrog 3rd tog lub cuab yeej ua tus kwj txais, HDA-I / O tuaj yeem txuas qhov chaw thib 3 nrog rau lwm thaj chaw HDA.

• Integrated Audio Sensor: Txhua qhov kev tawm tswv yim muaj nyob ntawm HDA-I / O muaj peev xwm ua kom pom lub suab. Cov sensors no tuaj yeem siv los ua cov txheej xwm los yog kev ua ub no.
• Zone Input Ducking: HDA-I/O muaj peev xwm "faus hauv" ib qho kev tawm suab ntawm cov suab lus xaiv tam sim no. Qhov kev daws teeb meem zoo tshaj plaws yog kom luv luv qhov ntim ntawm qhov tam sim no yog ua lub suab tshaj tawm lossis lub tswb nrov nrov.
• Kev xaiv lub zog: HDA-I / O tuaj yeem siv los ntawm PoE lossis 12VDC adapter muab.

Yam & Daim

Nrog rau HDA-I / O yog cov hauv qab no:

TSEEM CEEB

1. HDA-I/O Stream Adapter
2. 12 VDC Adapter
3. Teb Chaws Asmeskas, UK, Euro Plug Adapter
4. Sab laug / Txoj Cai L Brackets
5. 4L Bracket Screws
6. 4 Roj Hmab Taw

Cov lus piav qhia pem hauv ntej

Muaj peb (3) LEDs nyob rau pem hauv ntej vaj huam sib luag ntawm HDA-IO:

1. Lub hwj chim LED: Qhia ib (1) ntawm cov hauv qab no:
   • Khoom Xiav: Lub zog tau siv rau lub cuab yeej thiab nws tau pib ua tiav.
   • Tawm: Fais fab tau raug tshem tawm ntawm lub cuab yeej.
2. LED Status: Qhia ib (1) ntawm cov hauv qab no:
   • Khoom Xiav: Cov cuab yeej tau programmed nrog Total Control software thiab npaj rau kev ua haujlwm.
   • Blinking Blue: Lub cuab yeej tau txais kev rub tawm los ntawm Total Control programming software.
   • Blinking Green: Lub cuab yeej tau txais kev hloov kho firmware, lub teeb no txuas ntxiv mus kom txog thaum qhov hloov tshiab tau siv tag nrho.
   • Tawm: Lub cuab yeej tsis tau programmed nrog Total Control software.
   
3. Ethernet LED: Qhia ib (1) ntawm cov hauv qab no:
   • Khoom Xiav: Lub cuab yeej tau txais IP chaw nyob los ntawm lub network hauv zos.
   • Blinking Blue: Lub cuab yeej txuas nrog lub network hauv zos; Txawm li cas los xij, nws tsis tau txais qhov chaw nyob IP.
   • Tawm: Lub cuab yeej tsis txuas nrog lub network hauv zos.
4. Pib dua khawm: Muaj ob (2) txoj hauv kev los nias lub pob no:
   • Ib zaug nias: Coj mus rhaub khawm Pib dua kom lub zog voj voog lub cuab yeej.
   • Factory Reset: Nias-n-tuav lub khawm Pib dua rau 10 vib nas this lossis ntau dua.
   Qhov kev xaiv no tsis tuaj yeem thim rov qab, thaum lub cuab yeej tau raug lub Hoobkas ua haujlwm nws yuav tsum tau rov ua haujlwm dua.

Lub Vaj Huam Sib Luag Cov Lus Qhia - Siv raws li kwj Injector

Hauv qab no yog cov kev sib txuas muaj nyob rau tom qab ntawm HDA-IO:

1. DC IN: Txuas cov khoom siv 12VDC adapter rau qhov chaw nres nkoj no kom lub zog HDA-IO.
2. LAN: Tag Nrho Duplex Gigabit LAN nkaus xwb, rau lub suab streaming thiab cheeb tsam tswj (Wi-Fi TSIS tau txais kev txhawb nqa, ntaus ntawv yuav tsum nyuaj-lined rau lub network).
3. 12 VDC CTRL: Mono 3.5mm connector muaj peev xwm muab 150mA ntawm tam sim no.
4. Analog/Digital Inputs: Ob qho ntawm cov khoom siv hauv qab no tuaj yeem siv los muab HDA "siab-txhais" suab kwj. Tsuas yog ib qho kev tawm tswv yim tuaj yeem siv rau txhua lub sijhawm.
   • Analog – Unbalanced RCA
   • Toslink (Optical)
   • Digital Coax

Lub Vaj Huam Sib Luag Sab Nraud - Siv ua tus txais kwj

Hauv qab no yog cov kev sib txuas muaj nyob rau tom qab ntawm HDA-IO:

1. DC IN: Txuas cov khoom siv 12VDC adapter rau qhov chaw nres nkoj no kom lub zog HDA-IO.
2. LAN: Tag Nrho Duplex Gigabit LAN nkaus xwb, rau lub suab streaming thiab cheeb tsam tswj (Wi-Fi TSIS tau txais kev txhawb nqa, ntaus ntawv yuav tsum nyuaj-lined rau lub network).
3. 12 VDC CTRL: Mono 3.5mm connector muaj peev xwm muab 150mA ntawm tam sim no.
4. Analog/Digital Outputs: Tag nrho peb (3) muaj peev xwm siv tau. Lub HDA-IO raws li tus kwj tau txais muab 3rd tog suab thaj tsam nrog kev nkag mus rau cov suab hauv streaming ntawm HDA.
   • Analog – RCA Style
   • Toslink (Optical)
   • Digital Coax

Cov lus qhia installation

Lub HDA-IO amplifier yog muab nrog ob (2) "L" zoo li tus brackets rau mounting rau ntawm phab ntsa los yog ruaj ntseg ntsug nto.

1. Ntxig cov screws muab nkag rau hauv ob (2) qhov tseem ceeb ntawm L zoo li tus bracket (raws li pom ntawm daim duab ntawm sab xis).
   Qhov L zoo li tus bracket tuaj yeem ntsia tau ua ntej thiab HDA-IO amplifier tuaj yeem tso tom qab.
2. Ntxig cov screws muab nkag rau hauv plaub (4) keyed slots rau phab ntsa mounting.
   Keyhole Txoj kab uas hla: 0.48 "/ 12.5mm
   
3. Xyuas kom tseeb tias tag nrho cov screws tau raug ntsia ruaj ntseg.
   

Kev teeb tsa Network

Thaum siv ntau tshaj ib (1) HDA li, URC's HDA-SW5 Network Hloov yog yuav tsum tau nyob rau hauv lub zos network.
Yog xav paub ntxiv txog HDA-SW5 Network Hloov, thov mus saib ntawm HDA-SW5 Owner's Manual.
Txawm hais tias 3rd Party AVB keyboards yuav raug siv, lawv tsis tau txais kev txhawb nqa los ntawm URC's Technical Support team.

Txuas HDA-I/O rau Network

1. Txuas lub ethernet cable mus rau qhov chaw nres nkoj LAN muaj nyob ntawm lub taub hau-kawg network hloov.
   Yog tias tsis muaj qhov hloov pauv txuas nrog lub network ces txuas lub ethernet cable mus rau qhov chaw nres nkoj LAN ntawm lub router hauv zos (Luxul nyiam).
2. Txuas lub ethernet cable los ntawm cov kauj ruam dhau los mus rau ib qho chaw nres nkoj LAN ntawm HDA-SW5.
3. Txuas lwm ethernet cable rau ib qho chaw LAN muaj nyob ntawm HDA-SW5 Network Hloov.
4. Txuas lub ethernet cable los ntawm cov kauj ruam dhau los mus rau qhov chaw nres nkoj ethernet nyob tom qab ntawm HDA-IO (nplooj 5).
5. Configure HDA-IO rau DHCP / MAC kev tshwj tseg hauv lub router hauv zos thiab muab cov khoom siv rau hauv qhov tshiab lossis tag nrho Cov Kev Tswj Xyuas uas twb muaj lawm. Ib tus neeg muaj ntawv pov thawj URC integrator yuav tsum tau ua ke nrog HDA-IO rau hauv ib qho tshiab los yog tag nrho cov kev tswj system.
   

HDA Modules
URC's HDA kab ntawm cov khoom muaj ob peb txoj kev modules uas nkag tau los ntawm txhua tus neeg siv graphical interface.
Cov qauv no ua haujlwm rau ntau yam kev siv vaj tse thiab kev lag luam muab cov neeg siv kawg nrog kev ua haujlwm siab ncaj qha los ntawm txhua qhov URC interface.
Rau cov lus qhia tshwj xeeb ntawm yuav ua li cas siv cov HDA modules no, thov mus saib hauv
HDA Tus neeg siv phau ntawv qhia.
Cov modules hauv qab no tau txais kev txhawb nqa los ntawm HDA-I / O Multi-Zone Ampua neej nyob:

• Chav Volume Module
• Chav / Zone EQ Module
• Volume Tov Khoom Module
• Tshaj Tawm Module
• Input Status
• Amplifier Status
• Zone xwm txheej

Tsis yog tag nrho HDA ​​modules raug tso tawm ntawm sab xis, kom paub meej txog yuav ua li cas cov modules no, xa mus rau HDA Cov Neeg Siv Khoom Qhia.

Specifications

Kev sib txuas
Cov tswv yim audio:

• 1 x Stereo Analog RCA
  style nkag
• 1 x Toslink (Optical) Digital
  Tswv yim
• 1 x Digital Coaxial Input
  Cov Tawm Suab:
• 1 x Stereo Analog RCA
  style tso zis
• 1 x Toslink (Optical) Digital
  Tswv yim
• 1 x Digital Coaxial Input

Qhov ntev

• 1.44 "x 4.94" x 5"

Qhov hnyav

• 0.65 lbs

Suab

• 96 kHz / 24-ntsis streaming
• Dolby Digital® thiab DTS® 5.1 channel Downmixing (tsuas yog digital inputs)
• Ducking input muaj peev xwm
• Kev txhawb nqa nplooj ntawv
• Cia li 10 .WAV files in cwb amplifier (rau lub tswb nrov thiab/los yog ua rau ceeb toom chimes)

Kub

• Ua haujlwm kub: 32 ​​° F txog 86 ° F
• Humidity: siab tshaj 95%
• Cia: -40 ° F txog 140 ° F

Hwj chim

• Kev siv hluav taws xob: 12V DC 0.9A (siv adapter)

Daim Ntawv Ceeb Toom Txwv Txwv
https://www.urc-automation.com/legal/warranty-statement/
End User Agreement
Cov ntsiab lus thiab cov xwm txheej ntawm Cov Neeg Siv Pom Zoo Kawg muaj nyob ntawm
https://www.urc-automation.com/legal/end-user-agreement/ yuav siv.

Federal Communication Commission Interference Statement
Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Txoj Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj kev cuam tshuam tsis zoo rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov cuab yeej tawm thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib qho ntxiv ntawm cov kev ntsuas hauv qab no:

• Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
• Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

https://iq.ulprospector.com

Ceeb toom!
Cov chaw tsim khoom tsis muaj lub luag haujlwm rau ib qho kev cuam tshuam hauv xov tooj cua lossis TV los ntawm kev hloov kho tsis raug cai rau cov khoom siv no.
Cov kev hloov pauv lossis kev hloov kho tsis tau pom zoo los ntawm cov chaw tsim khoom tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.

Cov ntaub ntawv tswj hwm rau tus neeg siv
• CE ua raws Daim Ntawv Ceeb Toom Cov Khoom Siv nrog "CE" cim ua raws li EMC Cov Lus Qhia
2014/30/EU tshaj tawm los ntawm pawg thawj coj ntawm European Community.

1. EMC Cov Lus Qhia
   • Emission
   • Kev tiv thaiv kab mob
   • Hwj chim

• Tshaj Tawm Txog Kev Ua Raws Cai
  "Ntawm no, Universal Remote Control Inc. tshaj tawm tias HDA-I/O no ua raws li Cov Cai Tseem Ceeb."

Kev pab txhawb nqa
Tus Hu Dawb: 800-904-0800 Ib
Main: 914-835-4484 Ib
techsupport@urc-automation.com
H ours : 9:0 am – 0:5 pm ESTM – F
Rov 1.0

Cov ntaub ntawv / Cov ntaub ntawv

URC HDA-I O HDA Input Output Stream Adapter [ua pdf] Tus tswv phau ntawv HDA-I O, HDA Input Output Stream Adapter, HDA-I O HDA Input Output Stream Adapter, Tawm Tawm Tawm Tawm Tawm Adapter, Output kwj Adapter, kwj Adapter, Adapter

Cov ntaub ntawv

• Cov neeg siv phau ntawv