SPERRY INSTRUMENTS CS61200 Circuit Breaker Locator

Specifications

• Qhov siab: Txog li 2000 meters
• Kev siv sab hauv tsev nkaus xwb
• Pollution degree: 2
• Kev sojntsuam sib dhos thiab cov khoom siv tau ua raws li qhov qis tshaj ntawm MEASUREMENT CATEGORIES

Cov lus qhia siv khoom:

Kev ua haujlwm

• Siv lub plug-in transmitter thiab hand-held receiver, sai thiab xyuam xim ntes lub breaker tsim nyog los yog fuse tiv thaiv ib tug tshwj xeeb qhov hluav taws xob, phab ntsa hloov, los yog teeb pom kev zoo fixture.

Nrhiav Cov Hluav Taws Xob Hluav Taws Xob

1. Tshem tawm transmitter los ntawm lub receiver vaj tse thiab ntsaws rau hauv lub qhov hluav taws xob.
2. Xyuas kom tseeb tias lub transmitter xa cov teeb liab los ntawm viewhauv Green Transmit LED nyob rau sab saum toj ntawm chav tsev.
3. Lub transmitter kuj muaj xws li qhov hluav taws xob thaiv hluav taws xob tester. Rau kev khiav hauj lwm ntawm no feature, thov review thiab ua raws li cov lus qhia tom kawg ntawm phau ntawv.
4. Xyuas kom tseeb tias lub receiver muaj 9-volt roj teeb tshiab thiab ua haujlwm zoo los ntawm viewnyob rau hauv lub LED (s) nyob rau pem hauv ntej ntawm lub receiver.

Siv tus txais

• Siv lub wand ntawm lub receiver, raws li qhia nyob rau hauv daim duab 1, taug qab cov breakers los yog fuses mus ntes lub transmitting teeb liab. Kev taw qhia ntawm lub wand yog qhov tseem ceeb txhawm rau txhawm rau khaws lub teeb liab.

Cov lus qhia ua haujlwm

Nyeem cov tswv phau ntawv no kom huv si ua ntej siv thiab txuag.

Transmitter

1. 3-Prong qhov hluav taws xob Tester
2. Xim-Coded Wiring Status
3. GFCI Test Button.
4. Hloov ntawm LED

Tus txais

1. On-OFF khawm
2. 10 Visual Indications LEDs
3. Over-Molded Soft Grips

• Patented Sensing Probe
• Sib nqus rov qab
• Snap Together Edges
• Ua haujlwm los ntawm 9V roj teeb (nrog)

CS61200 Breaker Finder yog siv los nrhiav kom tau sai thiab yooj yim nrhiav lub breaker lossis fuse tiv thaiv ib qho hluav taws xob hluav taws xob. Nws siv lub plug-in transmitting ntaus ntawv thiab receiver mus taug qab qhov hluav taws xob, keyboards thiab teeb pom kev zoo fixtures. Lub plug-in transmitter kuj muaj xws li ib qho kev sib txuas hluav taws xob tester kom paub tseeb tias lub Circuit Court yog wired zoo. Lub transmitter thiab receiver snap ua ke rau compact cia.

SPECIFICATIONS

• Receptacle Transmitter Ua Haujlwm Ntau Yam: 90-120 VAC; 60 Hz, 3 W
• Qhov taw qhia: Audible thiab Visual
• Kev ua haujlwm ib puag ncig: 32 ° - 104 ° F (0 ° - 40 ° C) 80% RH max., 50% RH saum 30 ° C Qhov siab txog li 2000 meters. Kev siv sab hauv. Pollution degree 2. Ua raws li IED-664
• Roj teeb: Lub receiver ua haujlwm los ntawm ib qho 9 Volt
• Ntxuav: Tshem cov roj thiab grime nrog huv, qhuav ntaub
• Kev tiv thaiv Ingress: IPX0
• Kev ntsuas qeb: CAT II 120 V
• CS61200AS: 0.5A, QHOV CHAW UA HAUJ LWM ntawm kev sib txuas ntawm kev sojntsuam sib dhos thiab cov khoom siv yog qhov qis tshaj ntawm MEASUREMENT CATEGORIES ntawm kev sojntsuam sib dhos thiab ntawm cov khoom siv.

NYEEM UA NTEJ: Cov ntaub ntawv tseem ceeb ntawm kev nyab xeeb

Hauv kev rau siab mus ntsuab, tag nrho cov lus qhia rau lub cuab yeej no tuaj yeem rub tawm los ntawm www.sperryinstruments.com/en/resources. Thov nco ntsoov nyeem cov lus qhia thiab cov lus ceeb toom ua ntej siv cov cuab yeej no. Kev puas tsuaj rau lub cuab yeej lossis kev raug mob rau tus neeg siv yuav tshwm sim los ntawm kev tsis ua raws li tag nrho cov lus qhia lossis lus ceeb toom!

Nyeem tag nrho cov lus qhia ua haujlwm ua ntej siv.

Siv ceev faj thaum kuaj xyuas cov hluav taws xob hluav taws xob kom tsis txhob raug mob vim hluav taws xob poob siab. Sperry Instruments suav tias yog kev paub txog hluav taws xob ntawm ib feem ntawm tus neeg siv thiab tsis muaj lub luag haujlwm rau kev raug mob lossis kev puas tsuaj vim kev siv tsis raug ntawm qhov ntsuas no.

Saib thiab ua raws li tag nrho cov txheej txheem kev nyab xeeb kev lag luam thiab cov lej hluav taws xob hauv zos. Thaum tsim nyog hu rau tus kws kho hluav taws xob tsim nyog los daws teeb meem thiab kho cov hluav taws xob tsis zoo.

SAFETY SYMBOLS

Xa mus rau phau ntawv no ua ntej siv tus ntsuas no.

Lub tester muaj kev tiv thaiv thoob plaws los ntawm ob chav rwb thaiv tsev los yog cov rwb thaiv tsev ntxiv.

SAFETY CEEB TOOM

Cov cuab yeej no tau tsim, tsim thiab sim raws li IEC61010: Kev nyab xeeb rau kev ntsuas hluav taws xob, thiab xa mus rau qhov zoo tshaj plaws tom qab kev soj ntsuam dhau. Phau ntawv qhia no muaj cov lus ceeb toom thiab cov cai tswj kev nyab xeeb uas yuav tsum tau ua los ntawm tus neeg siv kom paub meej tias kev ua haujlwm zoo ntawm cov cuab yeej thiab khaws cia rau hauv qhov chaw nyab xeeb. Yog li ntawd, nyeem los ntawm cov lus qhia ua haujlwm no ua ntej siv lub ntsuas.

yog tseg rau tej yam kev mob thiab tej yam uas yuav ua rau mob hnyav lossis tuag taus.

yog tseg rau tej yam kev mob thiab tej yam uas yuav ua rau mob hnyav lossis tuag taus.

yog tseg rau tej yam kev mob thiab tej yam uas yuav ua rau raug mob los yog instrument puas.

* Nws yuav tsum tau sab laj nyob rau hauv txhua rooj plaub qhov twg tau cim tseg, txhawm rau txhawm rau paub qhov xwm txheej ntawm HAZARDS uas muaj peev xwm thiab txhua yam uas yuav tsum tau ua kom zam dhau lawv.

• Nyeem txog thiab nkag siab cov lus qhia hauv phau ntawv no ua ntej siv twj paj nruag.
• Khaws phau ntawv ntawm tes los pab kom tau txais kev siv ceev thaum twg tsim nyog.
• Qhov ntsuas yog tsuas yog siv rau hauv nws cov ntawv thov.
• Nkag siab thiab ua raws txhua cov lus qhia kev nyab xeeb muaj nyob hauv phau ntawv.
• Tsis ua raws li cov lus qhia saum toj no tuaj yeem ua rau raug mob, ntsuas kev puas tsuaj thiab / lossis kev puas tsuaj rau cov cuab yeej hauv kev sim.
• Tsis txhob sim ntsuas yog tias muaj qhov txawv txav, xws li cov ntaub ntawv tawg thiab cov hlau raug pom ntawm qhov ntsuas.
• Tsis txhob nruab qhov hloov pauv lossis hloov kho rau qhov ntsuas.
• Tshawb xyuas kev ua haujlwm kom raug ntawm qhov chaw paub ua ntej siv lossis ua haujlwm raws li qhov tshwm sim ntawm qhov ntsuas ntsuas.
• Tsuas yog cov khoom siv uas ua tau raws li cov chaw tsim khoom tshwj xeeb yuav tsum tau siv.
• Tsis txhob siv cov kev sojntsuam sib dhos rau kev ntsuas ntawm cov khoom siv hluav taws xob.
• Kev nyab xeeb ntawm txhua qhov kev sib txuas nrog cov cuab yeej siv yog lub luag haujlwm ntawm cov khoom sib dhos ntawm qhov system.

• Tsis txhob sim ua ntsuas nyob rau hauv lub xub ntiag ntawm flammable gases. Txwv tsis pub, kev siv cov cuab yeej yuav ua rau muaj qhov tawg, uas tuaj yeem ua rau tawg.
• Tsis txhob sim siv qhov ntsuas yog tias nws qhov chaw lossis koj txhais tes ntub.
• Tsis txhob qhib lub roj teeb npog thaum ntsuas.
• Cov cuab yeej tsuas yog siv rau hauv nws cov ntawv thov lossis cov xwm txheej. Txwv tsis pub, kev ruaj ntseg ua haujlwm nrog lub ntsuas ntsuas tsis ua haujlwm, thiab cov cuab yeej puas lossis raug mob hnyav yuav tshwm sim.

• Tsis txhob tso lub twj tso kua mis rau lub hnub ncaj qha, kub thiab av noo lossis dej poob.
• Qhov siab tshaj 2000m lossis tsawg dua. Kev khiav hauj lwm kub yog nyob rau hauv 0 ° C thiab 40 ° C.
• Cov cuab yeej no tsis muaj plua plav thiab dej pov thawj. Cia kom deb ntawm hmoov av thiab dej.
• Nco ntsoov tua lub ntsuas hluav taws xob tom qab siv. Thaum qhov ntsuas yuav tsis siv rau lub sijhawm ntev, muab tso rau hauv qhov chaw cia tom qab tshem lub roj teeb.
• Ntxuav: Siv ib daim ntaub dipped hauv dej los yog cov tshuaj ntxuav tes kom huv si. Tsis txhob siv cov tshuaj abrasives lossis cov kuab tshuaj, txwv tsis pub cov cuab yeej yuav raug puas, deformed los yog discolored.
• Cov cuab yeej no tsis muaj plua plav thiab tsis muaj dej. Cia kom deb ntawm hmoov av thiab dej.

Lub Cim qhia rau ntawm qhov ntsuas txhais tau hais tias tus neeg siv yuav tsum xa mus rau cov khoom muaj feem xyuam hauv phau ntawv kom muaj kev nyab xeeb ntawm lub ntsuas ntsuas. Nws yog ib qho tseem ceeb kom nyeem cov lus qhia nyob qhov twg cim tshwm nyob rau hauv phau ntawv. Cov cim uas teev nyob rau hauv cov lus hauv qab no yog siv rau ntawm qhov ntsuas no.

 Tus neeg siv yuav tsum xa mus rau phau ntawv.

Cov cuab yeej nrog ob npaug los yog muaj zog rwb thaiv tsev.

Kev ua haujlwm

• Siv lub plug-in transmitter thiab hand-held receiver, sai thiab xyuam xim ntes lub breaker tsim nyog los yog fuse tiv thaiv ib tug tshwj xeeb qhov hluav taws xob, phab ntsa hloov los yog teeb pom kev zoo fixture.

Nco tseg: Ib qho khoom siv cais, CS61200AS, yuav tsum tau taug qab cov keyboards thiab teeb pom kev zoo.

Nrhiav Cov Hluav Taws Xob Hluav Taws Xob

1. Tshem tawm transmitter los ntawm lub receiver vaj tse thiab ntsaws rau hauv lub qhov hluav taws xob.
2. Xyuas kom tseeb tias transmitter xa ib lub teeb liab los ntawm viewNyob rau Green "Transmit" LED nyob rau sab saum toj ntawm chav tsev.
3. Lub transmitter kuj muaj xws li qhov hluav taws xob thaiv hluav taws xob tester. Rau kev khiav hauj lwm ntawm no feature thov review thiab ua raws li cov lus qhia tom kawg ntawm phau ntawv.
4. Xyuas kom paub tseeb tias tus txais tau muaj lub roj teeb 9-volt tshiab thiab ua haujlwm tau zoo los ntawm viewnyob rau hauv lub LED (s) nyob rau pem hauv ntej ntawm lub receiver.
5. Siv lub "wand" ntawm lub receiver, raws li qhia nyob rau hauv daim duab 1, taug qab cov breakers los yog fuses mus ntes cov teeb liab kis. Kev taw qhia ntawm lub wand yog qhov tseem ceeb txhawm rau txhawm rau khaws cov teeb liab kis. Tso lub wand raws li qhia rau kev ua haujlwm kom raug. Nco tseg: Vim qhov sib thooj ntawm lwm cov hluav taws xob thaiv, nws muaj peev xwm ua tau rau lub receiver los qhia lub teeb liab ntawm ntau lub breakers. Txhawm rau nrhiav qhov zoo tshaj plaws breaker nws yuav tsum tau mloog rau lub suab nrov tshaj plaws thiab saib rau lub siab tshaj plaws LED qhia los txheeb xyuas cov pov thawj tawg.
6. Thaum lub breaker tsim nyog nyob, txuas ntxiv tuav lub receiver wand tiv thaiv lub reaker thiab hloov lub breaker tawm. Qhov no yuav tshem tawm lub hwj chim mus rau lub chaw taws teeb transmitter thiab lub receiver yuav tsum tsis txhob ua cov lus teb. Raws li kev ceev faj ntxiv kom paub tseeb tias lub hwj chim tawm los ntawm viewnyob rau hauv cov xwm txheej ntawm ntsuab LED ntawm lub transmitter. Nws yuav tsis tau illuminated yog tias lub hwj chim tawm.

Nrhiav teeb pom kev zoo Fixture Circuits (yuav tsum tau accessory part #CS61200AS)

1. Tshem lub teeb pom kev zoo thiab ntxig cov ntsia hlau daj hauv qhov chaw txais khoom. (Daim duab 3)
2. Txuas lub transmitter rau hauv lub adapter thiab xyuas kom meej tias lub hwj chim yog nyob ntawm viewnyob rau hauv lub ntsuab LED ntawm lub transmitter. Nco tseg: Lub hwj chim yuav tsum tau qhib rau lub transmitter ua haujlwm. (Daim duab 3)
3. Mus rau lub vaj huam sib luag breaker thiab nrhiav lub voj voog uas siv lub receiver (Daim duab 2) raws li tau tham hauv seem "Kev Ua Haujlwm" dhau los.

Nrhiav Cov Hloov Hloov thiab Lwm Cov Hluav Taws Xob (yuav tsum muaj cov khoom siv ntxiv # CS61200AS)

1. Muab cov hlua khi dub rau ntawm cov hlau kub (dub) thiab cov hlua khi dawb rau cov hlau tsis huv (dawb). Yog hais tias ib tug nruab nrab hlau tsis yog tam sim no clip lub dawb lead mus rau hauv av hlau los yog hlau thawv.
2. Screw nyob rau hauv lub taub hau daj adapter thiab ntsaws rau hauv lub transmitter. Xyuas kom tseeb tias lub hwj chim yog nyob ntawm viewnyob rau hauv lub ntsuab LED ntawm lub transmitter. (Daim duab 4)
3. Mus rau ntawm lub breaker vaj huam sib luag thiab nrhiav lub voj voog uas siv lub receiver (Daim duab 2) raws li tau tham hauv seem "Kev Ua Haujlwm" dhau los.

OUTLET Tester

1. Tshem lub qhov hluav taws xob tester los ntawm lub receiver vaj tse.
2. Txuas lub tsev rau hauv ib qho 120 VAC 3-xaim qhov hluav taws xob. (Daim duab 5)
3. Ua tib zoo saib cov LEDs thiab phim nrog daim ntawv teev xwm txheej nyob rau ntawm lub tsev. (Daim duab 6)
4. Rewire qhov hluav taws xob (yog tias tsim nyog) kom txog rau thaum tus tester qhia txog kev xaim raug cai.

GFCI Test Function

Kev ua haujlwm

1. Txuas lub tester rau hauv 120 Volt tus qauv lossis GFCI qhov hluav taws xob.
2. View cov ntsuas ntawm tus tester thiab phim nrog daim duab ntawm tus tester.
3. Yog hais tias tus tester qhia tias muaj teeb meem ntawm kev xaim, tua tag nrho cov hwj huam rau lub qhov hluav taws xob thiab kho cov hlua hluav taws xob.
4. Rov qab fais fab rau lub qhov hluav taws xob thiab rov ua cov kauj ruam 1-3.

Txhawm rau kuaj GFCI Protected Outlets

1. Nrog rau GFCI cov chaw tsim khoom cov lus qhia kev teeb tsa los txiav txim siab tias GFCI tau teeb tsa raws li cov chaw tsim khoom cov lus qhia.
2. Txheeb xyuas qhov raug xaim ntawm lub chaw txais khoom thiab tag nrho cov chaw txais kev sib txuas ntawm qhov chaw nyob ntawm cov ceg hluav taws xob.
3. Ua haujlwm lub pob xeem ntawm GFCI tau teeb tsa hauv Circuit Court. GFCI yuav tsum mus. Yog tias tsis yog - tsis txhob siv lub voj voog - nrog ib tus kws kho hluav taws xob. Yog tias GFCI mus txawv tebchaws, rov pib dua GFC. Tom qab ntawd, ntxig lub GEGl tecter rau hauv lub renantanla ta ha tactad
4. Ua kom lub pob xeem ntawm GFCI tester tsawg kawg yog 6 vib nas this thaum kuaj GFCI mob (Daim duab 7). Kev pom pom ntawm GFCI tester yuav tsum tso tseg thaum tripped.
5. Yog hais tias tus tester tsis mus rau GFCI, nws qhia:
   1. teeb meem kev teeb tsa nrog kev ua haujlwm tag nrho GFCI, lossis
   2. Kev xaim zoo nrog GFCI yuam kev.

Tham nrog tus kws kho hluav taws xob los xyuas qhov xwm txheej ntawm cov xaim hluav taws xob thiab GFCI.

Thaum kuaj GFCls ntsia hauv 2- xaim tshuab (tsis muaj cov xaim hauv av), tus neeg ntsuas yuav muab qhov qhia tsis tseeb tias GFCI tsis ua haujlwm zoo. Yog tias qhov no tshwm sim, rov kuaj xyuas cov haujlwm ntawm GFCI siv qhov kev sim thiab rov pib dua khawm. GFCI khawm xeem ua haujlwm yuav ua kom pom kev ua haujlwm zoo.

Nco tseg:

1. Txhua yam khoom siv lossis khoom siv ntawm lub voj voog raug sim yuav tsum tau muab tshem tawm kom tsis txhob muaj kev nyeem ntawv yuam kev.
2. ot ib qho cuab yeej kuaj mob dav dav tab sis ib qho cuab yeej yooj yim los txheeb xyuas ze li ntawm txhua qhov tshwm sim tsis zoo ntawm cov kab hluav taws xob.
3. Xa tag nrho cov teeb meem qhia mus rau tus kws kho hluav taws xob tsim nyog.
4. Yuav tsis qhia qhov zoo ntawm av.
5. Yuav tsis pom ob lub xov hlau kub hauv ib lub voj voog.
6. Yuav tsis pom qhov sib xyaw ua ke ntawm qhov tsis xws luag.
7. Yuav tsis qhia txog kev thim rov qab ntawm cov khoom siv hauv av thiab hauv av.

Hloov cov roj teeb

• Lub receiver unit ua haujlwm los ntawm tus qauv 9 Volt roj teeb. Txhawm rau hloov, tshem lub roj teeb lub qhov rooj uas nyob rau sab nraub qaum, nrog lub hau me me. Hloov cov roj teeb tshiab thiab kaw lub qhov rooj roj teeb.

16250 W Woods Edge Road New Berlin, WI 531511

• 1-800-624-4320 Ib
• ecm.customer.service@nVent.com

FAQ

• Q: Cov khoom no puas tuaj yeem siv sab nraum zoov?
  • A: Tsis yog, cov khoom no yog tsim los siv sab hauv tsev nkaus xwb.
• Q: Hom roj teeb twg siv lub receiver?
  • A: Lub receiver siv lub roj teeb 9-volt (suav nrog).
• Q: Cov khoom no puas muaj plua plav thiab dej pov thawj?
  • A: Tsis yog, qhov ntsuas no tsis muaj plua plav thiab dej pov thawj. Khaws kom deb ntawm cov plua plav thiab dej kom tsis txhob muaj kev puas tsuaj.

Cov ntaub ntawv / Cov ntaub ntawv

SPERRY INSTRUMENTS CS61200 Circuit Breaker Locator [ua pdf] Phau ntawv qhia CS61200 Circuit Breaker Locator, CS61200, Circuit Breaker Locator, Breaker Locator

Cov ntaub ntawv

• Cov neeg siv phau ntawv