SILENCER 552 SSR Chaw Taws Teeb Pib Pib nrog Kev Ruaj Ntseg thiab Tsis Siv Neeg Nkag Nkag

RAU TXOJ HAUJ LWM INSTALLATION nkaus xwb

Yog tias koj tsis paub zoo hauv kev teeb tsa ntawm cov khoom no lossis xav tau ib daim ntawv qhia tag nrho ntawm kev teeb tsa, thov mus saib peb web qhov chaw @www.magnadyne.com

Pin	Xim	Muaj nuj nqi	Pin	Xim	Muaj nuj nqi
1	Ntsuab / Dawb	(-) Factory Alarm Re-Arm Output	9	Txiv kab ntxwv	(-) GND Thaum Armed / Xauv
2	Grey	(-) Hood Pin Safety Input	10	Liab / Dawb	(-) Channel 3 tso zis (Lub cev)
3	Dub / Dawb	(-) Chaw nres tsheb nres nkag	11	Lt. Ntshav / Daj	(-) Pib Tawm
4	Xiav	(-) Lub cev pob txha	12	Lt. Ntsuab/Dub	(-) Factory Alarm Disarm Output
5	Xim av	(+) Tsheb nres kev nyab xeeb nkag	13	Xim av / Dub	(-) Horn
6	Ntsuab	(-) Qhov rooj	14	Dk. Xiav	Av Thaum Khiav
7	Violet	(+) Qhov rooj	15	Txiv kab ntxwv/dawb	(-) Cov Khoom Siv Ntxiv
8	Lt. Violet/White	Tach Input (AC)	16	Paj yeeb	(-) Ignition Output

Mounting Lub Chaw Txais / Tswj Chaw (RCC)

1.  Xaiv ib qho chaw nyob rau sab sauv los yog sab ntawm lub qhov rais tsheb. Qhov chaw siab dua yog qhov zoo tshaj plaws.
2. Tshem cov kab ntawv thaub qab los ntawm daim kab xev rau sab nraub qaum ntawm RCC thiab lo nws rau daim iav tsom iav.
3.  Txoj kev RCC cable mus rau qhov chaw ntawm tus tswj module.

Programming System Features

Txhua lub SILENCER cov chaw taws teeb pib muaj cov ntawv qhia zaub mov uas tuaj yeem tsim kho kom haum rau cov kev xav tau ntawm txhua lub tsheb. Cov yam ntxwv no tuaj yeem teeb tsa los ntawm kev siv RCC khawm Feature Programming txheej txheem lossis los ntawm Windows PC programming thiab SILENCER web app.
Feature Programming los ntawm RCC khawm

1. Qhib tus neeg tsav tsheb qhov rooj.
2. Qhib lub qhov hluav taws xob qhov hluav taws xob ON thiab OFF.
3.  Tsis pub dhau 5 vib nas this, nias thiab tuav RCC khawm kom xaiv cov ntawv qhia zaub mov.
   •  Ib tug chirp qhia Menu #1.
   • Tuav lub khawm ntev dua rau ob lub chirps. Koj nyob hauv cov zaub mov #2.
   • Txuas ntxiv tuav lub khawm RCC rau peb lub chirps. Koj nyob hauv cov zaub mov #3.
4. Thaum mus txog cov ntawv qhia zaub mov xav tau, tso RCC khawm.
5.  Tsis pub dhau 5 vib nas this, nias thiab tso RCC khawm tus lej ntawm lub sijhawm sib xws rau cov yam ntxwv uas koj xav hloov tom qab ntawd nias thiab tuav lub pob ib zaug ntxiv txhawm rau xauv lub ntsej muag. Siren / horn yuav chirp kom phim qhov tshwj xeeb xaiv. Tso lub RCC khawm.
   Nco tseg: RCC hloov thawb yog ntu. Rau example, yog koj pib ntawm feature #1, ces thawb thiab tso lub valet hloov 2 zaug ntxiv, koj yuav nyob ntawm feature #3 thiab hais txog. Nco ntsoov thawb thiab tuav lub valet hloov ib zaug ntxiv tom qab txhua qhov kev xaiv los xauv lub feature ua ntej siv lub transmitter los hloov qhov chaw.
6. Siv cov los yog cov nyees khawm ntawm SILENCER cov chaw taws teeb los kho cov yam ntxwv.
7. Rau cov nta nrog tsuas yog ob txoj kev xaiv, qhov = 1 Chirp chaw, thaum lub = 2 Chirp chaw.
8. Rau cov yam ntxwv uas muaj ntau tshaj ob qhov chaw, khawm xaiv cov chaw nyob rau hauv ascending order. Nias thiab tso lub pob kom ntau li ntau zaus los kho cov yam ntxwv.
9. Horn/siren yuav chirp qhia qhov chaw tau xaiv.
10. Tig tus yuam sij qhov hluav taws xob rau ON kom tawm ntawm cov phiaj xwm tshwj xeeb.

Ntawv qhia zaub mov #1 (Default in Bold)

Yam khoom	Feature	Chirps
		1	2	3	4	5	6	7	8	9
1	Cov Ntaub Ntawv Raws Cai	ADS	Fortin
2	Kev Pom Zoo Chirps	On	Tawm
3	Txheej Txheem	Active	Passive
4	Qhov Rooj Xauv Hom	Active	Passive
5	Forced Passive Arming	On	Tawm
6	Ignition Key Tswj Xauv	Tawm	On
7	Ignition Key Tswj Xauv	Tawm	On
8	Panic nrog Ignition On	Tawm	On
9	Riam phom Thaum Tsav Tsheb	Tawm	On
10	Qhov Rooj Xauv Pulse	0.8 sec	3.5 sec	0.4 Sec
11	Horn Tso Tawm	20ms ib	30ms ib	40ms ib	50ms ib	Lub tswb nrov nkaus xwb
12	Kaw Kaw	Tawm	CC 1	CC 2
13	Qaij Sensor Kho	3*	1.5 *	Tawm

Ntawv qhia zaub mov #2 (Default in Bold)

Yam khoom	Feature	Chirps
		1	2	3	4	5	6	7	8	9
1	Lub Qhov Rooj Loj Loj	On	Tawm
2	Tsis Txaus Siab Pre-vention Circuit Court	On	Tawm
3	Valet Hloov Pulse suav rau Override	1 Pulse	2 Pulses	3 Pulses	4 Pulses	5 Pulses
4	Qhov Rooj Ua Rau Yuam Kev Chirp	On	Tawm
5	Ob Chav mem tes Xauv	Tawm	On
6	Muab ob npaug Pulse Unlock	Tawm	On
7	Siren Ntev	30 sec	60 sec
8	Factory Alarm Disarm nrog Trunk Tso	On	Tawm
9	Lub Tswb Tswb Tswb Tswb Tswb Tswb	Ib leeg	Ob npaug
10	Factory Alarm Disarm	Nrog Xauv	Ua ntej Xauv	Pib Pib Xwb

Ntawv qhia zaub mov #3 (Default in Bold)

Yam khoom	Feature	Chirps
		1	2	3	4	5	6	7	8	9
1	Hom kis kab mob	Tsis siv neeg	Phau ntawv
2	Cav Ntsuam Xyuas Hom	Wireless Kev	Voltage	Wired Txuas	Tawm
3	Cranking Duration	0.6 Sec	0.8 sec	1.0 sec	1.2 sec	1.4 sec	1.6 sec	1.8 sec	2.0 sec	4.0 sec
4	Lub Sij Hawm Pib Pib Ua Haujlwm	12 feeb	24 feeb	60 feeb
5	Diesel Pib qeeb	Tawm	Timer 15 feeb	Timer 30 feeb	Timer 45 feeb
6	ACC Output Thaum Diesel Tos Pib	Tawm	On
7	2nd Ignition Behavior	Ignition 1	Accessory
8	Cwj Pwm Coj Tus Cwj Pwm	Tsis tu ncua	Flashing
9	Timer Hom Lub Sijhawm Ua Haujlwm	12 feeb	3 feeb	6 feeb	9 feeb
10	Turbo Timer Khiav Sijhawm	1 feeb	3 feeb	5 feeb	10 feeb

Nkag mus rau lwm qhov tshwj xeeb hauv tib cov ntawv qhia zaub mov

1.  Nias thiab tso RCC Button tus naj npawb ntawm lub sij hawm kom nce mus los ntawm qhov kawg feature programmed mus rau lwm yam uas yuav tsum tau programmed.
2. Nias lub khawm RCC thiab tuav nws.
3. Siv SILENCER cov chaw taws teeb thiab ua raws cov kauj ruam 5 lossis 6 saum toj no los kho cov yam ntxwv.

Nkag mus rau lwm cov ntawv qhia zaub mov

1. Nias thiab tuav lub khawm RCC
2. Tom qab 3 vib nas this, lub kaw lus yuav nce mus rau cov ntawv qhia zaub mov tom ntej thiab ua raws li cov suab paj nruag thiab LED flashes.

Tawm ntawm qhov kev kawm tshwj xeeb hom

1.  Teem lub ignition key rau ON. Ib tug ntev confirmation chirp yuav hnov ​​yog ib tug horn los yog siren txuas.
2. Tsis siv neeg tom qab 30 vib nas this uas tsis muaj tswv yim los ntawm RCC khawm (ntev chirp).
3. RCC khawm tau nias ntau zaus (ntev chirp).

Feature Programming los ntawm PC/App

1. Yuav tsum muaj lub khoos phis tawj windows nrog kev txhawb nqa internet. Lub APP txhawb Windows 7 (sp1) txog Windows 10 (Apple/Mac computers tsis txaus siab)
2. Qhov programming adapter qauv #ALA-21P yuav tsum tau
3. Ua raws li cov lus qhia uas tau muab nrog ALA-21P accessory.

Cav Ntsuam Xyuas Hom:
Lub cav kuaj xyuas hom ntawm txhua qhov SILENCER cov chaw taws teeb pib yog teem rau "Wireless Tach" los ntawm lub neej ntawd. Thaum tag nrho cov xaim ua tiav thiab raug, lub cav tuaj yeem pib ua haujlwm deb yam tsis muaj lwm yam kev hloov pauv. Lub cav hom, huab cua huab cua thiab lwm yam yuav xav tau ntau hom cav kuaj xyuas kom ntseeg tau kev ua haujlwm. Siv cov ntaub ntawv uas nyob ze los teeb tsa lwm hom kev kuaj xyuas lub cav.

Wireless Tach Kawm

1. Tom qab kev teeb tsa tiav lawm, siv SILENCER tus yuam sij fob thiab pib qhov pib qhov chaw taws teeb.
2.  Yog tias lub cav tsis pib ntawm qhov kev sim thawj zaug, cia lub SILENCER module voj voog thiab sim pib lub cav dua. Txog li (3) kev sim cranking tej zaum yuav xav tau los pib thiab khiav lub cav.
3. Thaum lub cav pib thiab khiav, cia nws khiav yam tsawg 30 vib nas this.
4.  Siv SILENCER key fob los kaw lub cav.

Wireless Tach yog programmed.
Hardwire Tach lossis Data Tach

• Hardwire Tach xav kom Lt.Violet/Dawb xaim txuas nrog cov xaim hluav taws xob xaim lossis cov hlua hlau.
•  Txheeb xyuas cov ntaub ntawv hla tus qauv tshwj xeeb kom paub tseeb tias nws yuav muab cov ntaub ntawv qhia teeb liab. Kev npaj ua ntej ntxiv ntawm cov ntaub ntawv module yuav xav tau. Xa mus rau cov ntaub ntawv qhia cov lus qhia.

Kawm paub tach teeb liab

1.  Pib lub tsheb nrog tus yuam sij.
2. Tsis pub dhau 5 vib nas this, nias thiab tuav lub pob valet ntawm RCC.
3. Thaum paub qhov teeb liab tach, lub xiav LED ntawm RCC yuav teeb los yog flash.

•  Thaum tach kawm los ntawm kev sib txuas ntawm hardwire, lub teeb nres tsheb yuav flash ib zaug
•  Thaum tach kawm los ntawm cov ntaub ntawv module, lub teeb nres tsheb yuav flash ob zaug.

Nco tseg:
Nyob ntawm cov ntaub ntawv bypass module siv, tej zaum koj yuav tau muab cov bypass module rau hauv tach kev kawm hom ua ntej ua ntej ua cov txheej txheem saum toj no. Review cov lus qhia ntawm cov ntaub ntawv bypass module ua ntej yuav mus.
Pairing ib lub chaw taws teeb tswj:
Koj lub SILENCER cov chaw taws teeb tswj cov chaw taws teeb twb tau ua ke rau cov tswj module. Yog tias koj tab tom hloov lossis ntxiv cov chaw taws teeb rau koj lub cev, lawv yuav tsum tau programmed (paired) rau cov tswj module ua ntej lawv yuav ua haujlwm rau lub kaw lus. Txhawm rau ua qhov kev sib txuas ntawm cov chaw taws teeb tswj, koj yuav tsum paub qhov twg koj "Valet Button nyob qhov twg thaum koj yuav siv lub pob thiab LED indica-tor los ua haujlwm ua khub.
Tej thaj chaw deb Pairing txheej txheem

1. Qhib tus neeg tsav tsheb qhov rooj.
2.  Ntxig tus yuam sij ignition rau hauv lub tog raj kheej tseem ceeb. Tig rau tus yuam sij ignition.
3. Nias thiab tso lub valet khawm ces nias thiab tuav lub valet khawm rau 1.5 vib nas this. LED flashes thiab horn / siren chirps (yog tias txuas).
4. Tso lub valet khawm. Lub kaw lus tam sim no nyob rau hauv kev ua khub thiab yuav nyob hauv Pairing hom rau 60 vib nas this.
5. Nias thiab tuav lub pob ntawm cov chaw taws teeb tswj tshiab.
6. Nias thiab tso lub khawm 5 zaug.
   • A. LED ntawm 4 khawm transmitter yuav pib qeeb qeeb.
   • B. Lo lus (PAir) yuav tshwm nyob rau hauv lub moos cheeb tsam ntawm 5 khawm LCD transmitter.
     Cov chaw taws teeb yuav nyob twj ywm hauv lub xeev no li 15 vib nas this.
7.  Nias thiab tso lub pob ntawm lub transmitter tshiab.
   Lub horn/siren chirps 1 long chirp. Cov chaw taws teeb tshiab yog programmed.
8. Tig tus yuam sij ignition mus rau qhov chaw Off. Ib tug ntev chirp los ntawm lub horn confirms tias hom kev ua khub yog tawm.

Nco tseg:
Koj qhov kev ruaj ntseg SILENCER yuav lees txais cov lej los ntawm mus txog (4) transmitters.
Tej thaj chaw deb Pib Shutdown Diagnostics
Yog tias lub chaw pib ua haujlwm qhib tab sis lub cav tsis ua haujlwm txuas ntxiv, cov txheej txheem kuaj mob tuaj yeem ua haujlwm los sim thiab txiav txim siab qhov ua txhaum hauv lub kaw lus.
Txhawm rau Shutdown Diagnostics

1. Nrog lub qhov hluav taws xob qhov hluav taws xob Tawm, nias thiab tuav RCC khawm.
2. Thaum tuav lub RCC khawm, tig lub qhov hluav taws kub qhov hluav taws xob Tom qab ntawd Tawm.
3. Tso lub RCC khawm.
4.  Nias thiab tso RCC khawm ib zaug.

RCC LED yuav tshaj tawm qhov laj thawj kaw kawg rau 1 feeb lossis kom txog thaum lub teeb hluav taws xob qhib dua. Sib piv cov LED flashes rau daim duab hauv qab no.

Cov xwm txheej LED Teeb	Yog vim li cas rau Shutdown
1	Over-Rev Shutdown
2	Runtime tas sij hawm
3	Kaw los ntawm Tus Kws Tshaj Lij (lossis Yeem Yeem khawm)
4	Tsawg lossis Tsis Pom RPM
5	Hood Qhib Kaw
6	(+) Nres Nres Nres
7	(-) Nres Nres Nres Nres Nres
9	Roj teeb tsheb tsawg (Voltage Xyuas Hom Tsuas)
10	Tos-Pib-Pib
11	Tswb Tsoo Thaum Lub Sij Hawm Pib

Programming Digital Shock Sensor:
Ua raws li txheej txheem txheej txheej txhawm rau teeb tsa qhov kev nkag siab ntawm cov digital poob siab sensor.
Nco tseg:
Qhov kev ceeb toom ua ntej tau hloov kho raws li qhov ua rau poob siab.

1. Teem lub kaw lus hauv hom kev tshem riam phom.
2.  Tig lub qhov hluav taws xob qhov hluav taws xob ON/OFF 3 zaug (xaus rau hauv).
3. Hauv 5 vib nas this, nias + khawm ua ke rau 2 vib nas this. Lub horn/siren yuav emit (1) ntev chirp los qhia koj nyob rau hauv Shock Sensor Sensitivity Adjustment hom.
4. Txhawm rau kom rhiab heev, nias lub pob. Txhua zaus koj nias lub pob koj yuav hnov ​​(1) chirp. Thaum koj mus txog qib MAX hloov kho, koj yuav hnov ​​1 luv + 1 ntev chirp.
5. Txhawm rau txo rhiab heev, nias lub pob. Txhua zaus koj nias lub pob koj yuav hnov ​​(2) chirps. Thaum koj mus txog qhov kev hloov kho MIN, koj yuav hnov ​​2 luv + 1 ntev chirp.
6. Lub shock sensor muaj 20 kauj ruam rau kev hloov kho. Lub neej ntawd teeb tsa yog 10.
7. Txhawm rau rov qab qhov kev poob siab sensor rov qab mus rau nws qhov chaw teeb tsa, nias thiab tso lub pob. Koj yuav hnov ​​3 chirps.
8.  Thaum lub sijhawm txheej txheem koj tuaj yeem sim los ntawm khob:
   1 luv chirp - prewarn; 1 Ntxoov Ntxawg Yaj - TIAG

Txhawm rau tawm ntawm Shock Sensor Sensitivity Adjustment Mode, qhib lub qhov hluav taws xob qhov tseem ceeb. Koj yuav hnov ​​3 chirps ntev.

Rov pib dua thiab tshem tawm

Yog tias cov phiaj xwm xav tau yuav tsum tau rov pib ua lub neej qub lossis lub Wireless Tach feature yuav tsum tau rov pib dua rau kev rov ua haujlwm dua, ua raws cov txheej txheem uas nyob nrog.

1. Qhib lub qhov rooj tsav tsheb.
2.  Tig tus yuam sij rau qhov chaw ON
3. Tsis pub dhau 5 vib nas this, nias thiab tso RCC khawm tus lej ntawm lub sijhawm xav tau hauv qab no los ua txoj haujlwm.
   • Nias thiab tso RCC khawm ob zaug kom tshem tawm tag nrho cov programmed chaw taws teeb tswj.
   •  Nias thiab tso lub khawm RCC peb zaug kom tshem tawm tag nrho cov haujlwm ua haujlwm rov qab mus rau lawv qhov chaw pib.
     Nco tseg: Cov txheej txheem no tsis lwv cov ntaub ntawv Wireless Tach.
   • Nias thiab tso RCC khawm plaub zaug kom tshem tawm tag nrho cov ntaub ntawv qhia ua ntej Wireless Tach.
4. Thaum koj tau xaiv txoj haujlwm koj xav ua, nias thiab tuav lub pob RCC. RCC LED yuav tawm thiab lub horn yuav chirp
   (yog tias txuas nrog) kom paub meej cov kauj ruam ua haujlwm tau xaiv. Tsis txhob tso lub khawm.
5. Nias thiab tso lub pob ntawm qhov programmed tej thaj chaw deb.
   Lub horn yuav chirp kom paub meej tias qhov feature tau rov pib dua / rho tawm.
6. Tso lub RCC khawm thiab tua tus yuam sij ignition. Lub horn yuav chirp (yog tias txuas) kom paub tseeb tias tawm.

TSEV KAWM NTAWV
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC cov cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:

1. Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam, thiab
2. Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.

Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau chav kawm B cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim thiab tuaj yeem ua kom lub zog ntawm lub zog ntawm lub xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li phau ntawv qhia, yuav ua rau muaj teeb meem cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau xov tooj cua lossis TV, uas tuaj yeem txiav txim siab los ntawm kev xa cov khoom siv OFF thiab ON, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

•  Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
•  Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

Txhawm rau ua kom tau raws li FCC RF raug cai, lub cuab yeej thiab nws lub kav hlau txais xov yuav tsum muaj qhov sib cais ntawm 20cm lossis ntau dua los ntawm tus neeg lub cev, tshwj tsis yog txhais tes thiab dab teg, kom txaus siab rau kev ua raws li RF.
CEEB TOOM
Cov kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm tog neeg lub luag haujlwm rau kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm lub cuab yeej no.

Cov ntaub ntawv / Cov ntaub ntawv

SILENCER 552 SSR Chaw Taws Teeb Pib Pib nrog Kev Ruaj Ntseg thiab Tsis Siv Neeg Nkag Nkag [ua pdf] Phau ntawv qhia 552 SSR Chaw Taws Teeb Pib Pib nrog Kev Ruaj Ntseg thiab Tsis Siv Neeg Nkag Nkag, 552 SSR Chaw Taws Teeb Pib Nrog Kev Ruaj Ntseg, Chaw Taws Teeb Pib Nrog Kev Ruaj Ntseg, Chaw Taws Teeb Pib, Kev Ruaj Ntseg thiab Tsis Muaj Qhov Nkag Nkag, Kev Ruaj Ntseg

Cov ntaub ntawv

• Cov neeg siv phau ntawv