Satel INT-KSG2R Keypad nrog Kov Ntsiab Tus Neeg Siv phau ntawv

TSEEM CEEB

Kev hloov pauv, hloov kho lossis kho tsis tau tso cai los ntawm cov chaw tsim khoom yuav ua rau koj cov cai tsis muaj nyob hauv qhov lav.

Ntawm no, SATEL sp. z oo tshaj tawm tias cov khoom siv xov tooj cua hom INT-KSG2R ua raws li Cov Lus Qhia 2014/53/EU. Cov ntawv nyeem tag nrho ntawm EU tshaj tawm txog kev ua raws li muaj nyob hauv internet hauv qab no chaw nyob: www.satel.pl/ce

Factory default codes:
Service code: 12345
Yam khoom 1 tus neeg siv tus tswv (administrator) code: 1111

Cov cim hauv qab no tuaj yeem siv rau hauv phau ntawv no:
- ceeb toom,
- ceev faj.

Taw qhia

Ua tsaug rau koj xaiv cov khoom no los ntawm SATEL. Paub koj tus kheej nrog phau ntawv no ua ntej koj pib siv lub keypad. Phau ntawv no piav txog cov keypad cov khoom thiab lawv cov nta. Rau kev piav qhia txog yuav ua li cas siv lub keypad rau kev tswj vaj huam sib luag, thov mus saib cov neeg siv phau ntawv ntawm kev tswj vaj huam sib luag uas lub keypad txuas nrog. Nco ntsoov tias lub keypad no ua haujlwm nrog kov cov yuam sij thiab gestures (xws li swiping es tsis txhob nias lub xub tuav).

Nug tus installer rau cov lus qhia yuav ua li cas siv koj tus kheej cov keyboard teeb tsa. Tus installer yuav tsum qhia koj txog yuav ua li cas khiav lub tswb system siv INT-KSG2R keypad.

Fig. 1. INT-KSG2R keypad.

LED ntsuas

LED	Xim	Kev piav qhia
	daj	flashing – teeb meem lossis teeb meem nco
	ntsuab	ON - tag nrho cov kev faib ua haujlwm los ntawm cov keypad yog armed flashing - Tsawg kawg yog ib qho kev faib tawm yog armed lossis tawm ncua kev suav rov qab tau ua haujlwm
	xiav	flashing - hom kev pabcuam yog nquag
	liab	ON or flashing - tswb lossis tswb nco

 Cov ntaub ntawv hais txog kev ua tub rog yuav raug muab zais tom qab lub sijhawm teev tseg los ntawm
installer.

Cov ntaub ntawv teeb meem raug muab zais tom qab ua tub rog. Tus installer txhais yog tias cov ntaub ntawv teeb meem raug muab zais tom qab tsuas yog ib qho ntawm cov partitions yog armed nyob rau hauv ib hom twg los yog tom qab tag nrho cov partitions yog armed nyob rau hauv tag nrho cov hom.

Yog tias Qib 2 (INTEGRA) / Qib 3 (INTEGRA Plus) kev xaiv tau qhib los ntawm tus installer:

• tus LED qhia lub tswb tsuas yog tom qab nkag mus rau tus lej,
• flashing ntawm LED txhais tau hais tias muaj teeb meem hauv qhov system, qee thaj chaw tau hla dhau, lossis tau muaj lub tswb.

Zaub

Cov zaub muab cov ntaub ntawv ntawm lub xeev system thiab tso cai rau koj los ua haujlwm thiab ua haujlwm rau lub tswb nrov. Tus installer txhais cov teeb tsa backlight. Cov zaub tuaj yeem ua haujlwm hauv ib hom hauv qab no:

• standby hom (thawj hom kev khiav hauj lwm),
• partition state presentation mode,
• screensaver hom.

Tus installer txiav txim siab yog tias lub xeev muab faib hom kev nthuav qhia thiab hom tshuaj ntsuam xyuas muaj.

Cov lus hais txog cov xwm txheej uas tshwm sim hauv lub tswb system tau tshwm sim tsis hais txog hom kev ua haujlwm.

Sau tus lej thiab nias qhib cov ntawv qhia zaub mov. Cov haujlwm tau nthuav tawm hauv plaub kab.
Qhov kev xaiv tam sim no yog qhov tseem ceeb.

Standby hom
Cov khoom hauv qab no tau nthuav tawm:

• hnub thiab sijhawm nyob rau hauv hom xaiv los ntawm tus installer (saib kab),
• keypad lub npe lossis lub xeev ntawm partitions xaiv los ntawm tus installer (kab hauv qab),
• cov npe ntawm macro command pawg saum toj no cov yuam sij (yog tias tus installer configured macro commands).

Tuav rau 3 vib nas this hloov mus rau lub xeev muab faib hom kev nthuav qhia.
Kov kom pib qhov screensaver.

Partition state presentation mode

Cov khoom hauv qab no tau nthuav tawm:

• cov cim uas qhia txog lub xeev ntawm kev faib ua haujlwm los ntawm cov keyboard,
• cov npe ntawm macro command pawg saum toj no yuam sij (yog tias tus installer configured macro commands).

Tuav rau 3 vib nas this hloov mus rau hom standby.
Thaum lub keypad ua haujlwm nyob rau hauv partition state presentation mode, screensaver is not available (nws tsis tuaj yeem pib manually lossis txiav).

Screensaver hom

Thaum cov zaub ua haujlwm hauv hom standby, qhov screensaver tuaj yeem pib:

• tsis siv neeg (tom qab 60 vib nas this ntawm inactivity),
• manually (kov ).

Tus installer txhais cov khoom yuav tsum tau tso tawm nyob rau hauv lub screensaver hom. Qhov no tuaj yeem yog:

• tej ntawv nyeem,
• lub xeev ntawm xaiv partitions (symbols),
• lub xeev ntawm cov cheeb tsam xaiv (cov cim lossis cov lus),
• lub xeev ntawm cov zis xaiv (cov cim lossis cov lus),
• Cov ntaub ntawv ntawm qhov kub thiab txias los ntawm ABAX / ABAX 2 wireless ntaus ntawv,
• hnub tim,
• sijhawm,
• lub npe keypad,
• cov ntaub ntawv ntawm kev siv lub zog ntawm cov khoom siv txuas nrog ASW-200 ntse plug.

Kov kom xaus qhov screensaver.

Cov yuam sij

Cov haujlwm ntawm cov yuam sij
	... kov kom nkag mus rau tus lej (code, faib tus lej, thiab lwm yam)
	kov thiab tuav rau 3 vib nas this los xyuas lub xeev ntawm thaj chaw
	kov thiab tuav rau 3 vib nas this los xyuas lub xeev ntawm kev faib tawm
	kov thiab tuav rau 3 vib nas this view lub tswb ceeb toom (raws li qhov xwm txheej cav)
	kov thiab tuav rau 3 vib nas this view cov teeb meem log (raws li qhov xwm txheej cav)
	kov thiab tuav rau 3 vib nas this view cov teeb meem
	kov thiab tuav rau 3 vib nas this kom qhib/tawm lub keypad CHIME
	kov thiab tuav rau 3 vib nas this los hloov cov zaub ntawm hom standby thiab faib lub xeev kev nthuav qhia hom
	kov kom hloov cov zaub ntawm hom standby thiab hom screensaver sau tus lej thiab kov nkag mus rau cov neeg siv zaub mov
	sau tus lej thiab kov txhawm rau tuav lub kaw lus / tshem tawm lub kaw lus / ceeb toom meej / qhib MONO hloov hom tso tawm / hloov BI hloov hom tso tawm / cuam tshuam ib ntus kev faib tawm / tshem tawm kev nkag mus rau lub tshuab nyiaj ntsuab / paub meej tias tus neeg saib xyuas puag ncig (qhov haujlwm twg yog pib nyob ntawm tus neeg siv hom, cov neeg siv txoj cai thiab lub xeev system - saib INTEGRA / INTEGRA Plus tswj vaj huam sib luag neeg siv phau ntawv)
	kov thiab tuav rau 3 vib nas this los ua kom lub tswb nrov
	kov thiab tuav rau 3 vib nas this los ua kom lub tswb nrov kho mob
	kov thiab tuav rau 3 vib nas this kom ua rau lub tswb ceeb toom
	sau tus lej thiab kov pib lub luag haujlwm xaiv los ntawm tus installer (nug tus installer uas nws ua haujlwm) kov thiab tuav rau 3 vib nas this los tuav lub kaw lus hauv hom: "tag nrho"
	sau tus lej thiab kov pib lub luag haujlwm xaiv los ntawm tus installer (nug tus installer uas nws ua haujlwm) kov thiab tuav rau 3 vib nas this los tuav lub kaw lus hauv hom: "tsis muaj sab hauv"
	sau tus lej thiab kov pib lub luag haujlwm xaiv los ntawm tus installer (nug tus installer uas nws ua haujlwm) kov thiab tuav rau 3 vib nas this los tuav lub kaw lus nyob rau hauv hom: "tsis muaj sab hauv thiab tsis nkag ncua"
	sau tus lej thiab kov pib lub luag haujlwm xaiv los ntawm tus installer (nug tus installer uas nws ua haujlwm) kov thiab tuav 3 vib nas this los tuav lub kaw lus hauv hom: "tag nrho + bypasses"
	4 tus yuam sij siv los khiav macro commands (saib: “Macro commands” p. 7)

Muaj cov haujlwm nyob ntawm qhov chaw keyboards.
Cov haujlwm ntawm cov yuam sij hauv cov neeg siv zaub mov tau piav qhia hauv INTEGRA / INTEGRA Plus tswj vaj huam sib luag neeg siv phau ntawv.

Siv cov yuam sij kov

Siv cov lus piav qhia hauv qab no.

Kov

Kov tus yuam sij nrog koj tus ntiv tes.

Kov thiab tuav
Kov tus yuam sij thiab tuav rau 3 vib nas this.

Swipe up 

Kov qhov chaw yuam sij thiab xaub koj tus ntiv tes mus rau:

• scroll rau daim ntawv,
• txav tus cursor nce lossis sab laug (nyob ntawm txoj haujlwm),
• tshem tus cim rau sab laug ntawm tus cursor thaum kho,
• tawm hauv graphic mode.

Swipe down
Kov qhov chaw yuam sij thiab xaub koj tus ntiv tes mus rau:

• scroll cia hauv daim ntawv,
• txav tus cursor down,
• hloov lub rooj plaub thaum kho,
• tawm hauv graphic mode.

Los so sab xis

Kov cov yuam sij hauv cheeb tsam thiab xaub koj tus ntiv tes mus rau:

• nkag mus rau submenu,
• pib ua haujlwm,
• txav tus cursor txoj cai,
• nkag mus rau hom duab.

Los so sab laug
Kov cov yuam sij hauv cheeb tsam thiab xaub koj tus ntiv tes mus rau:

• tawm ntawm submenu,
• txav tus cursor sab laug,
• nkag mus rau hom duab.

Macro cov lus txib

Cov lus txib macro yog ib ntu ntawm cov haujlwm uas yuav tsum tau ua los ntawm cov tswj vaj huam sib luag.
Cov lus txib macro ua kom yooj yim rau kev khiav lag luam lub tswb. Hloov chaw ntawm kev ua haujlwm ntau yam (xws li txhawm rau txhawm rau caj npab xaiv cov partitions) koj tuaj yeem khiav cov lus txib macro, thiab cov tswj vaj huam sib luag yuav ua tiav cov haujlwm tau muab rau cov lus txib macro.
Sib tham nrog tus installer uas macro commands yuav pab tau koj zoo tshaj plaws nyob rau hauv koj niaj hnub siv lub tswb system.
Lub installer tuaj yeem teeb tsa txog li 4 pawg ntawm macro commands. 16 macro commands tuaj yeem muab rau txhua pab pawg. Lub keypad muaj 4 cov yuam sij siv los khiav macro commands. Lub npe ntawm pawg yog tso tawm saum tus yuam sij.

Khiav ib tug macro hais kom ua

1. Kov . Daim ntawv teev cov macro commands uas koom nrog pab pawg no yuav tshwm sim.
2. Los so hauv qab kom pom cov lus txib macro koj xav khiav. Tam sim no xaiv macro hais kom ua yog tseem ceeb.
3. Kov khiav cov lus txib macro xaiv.
   Tus installer tuaj yeem muab rau pawg tsuas yog ib qho kev hais kom ua macro uas yuav khiav ncaj qha thaum kov .

Keypad xauv

Kov ces txhawm rau txhawm rau kov cov yuam sij. Thaum kov cov yuam sij raug kaw, koj tuaj yeem ntxuav lub keypad yam tsis muaj kev pheej hmoo ntawm kev ua haujlwm yuam kev.

Kov ces txhawm rau txhawm rau kov cov yuam sij.

 

Cov ntaub ntawv / Cov ntaub ntawv

	Satel INT-KSG2R Keypad nrog Kov Keys [ua pdf] Tus neeg siv phau ntawv INT-KSG2R Keypad with Touch Keys, INT-KSG2R, Keypad with Touch Keys, Touch Keys, Keypad
	Satel INT-KSG2R Keypad nrog Kov Keys [ua pdf] Daim ntawv qhia kev teeb tsa INT-KSG2R Keypad with Touch Keys, INT-KSG2R, Keypad with Touch Keys, Touch Keys, Keypad

Cov ntaub ntawv

• Cov neeg siv phau ntawv