PM-50 Analog Output Module
“
Cov ntaub ntawv khoom
Specifications
- Lub zog: Lub zog yog muab los ntawm PM-50 tus tswv tsev
ntaus ntawv. Yuav tsum siv chav kawm 2 Circuit Court raws li National Electrical
Code (NEC), NFPA-70 lossis Canadian Electrical Code (CEC), Tshooj I,
C22.1 lossis Limited Fais Fab (LPS) raws li IEC / EN 60950-1
los yog Limited-zog Circuit Court raws li IEC / EN 61010-1. Max zog:
1.3 W - Daim ntawv pov thawj thiab kev ua raws cai: CE pom zoo EN
61326-1 Immunity to Industrial Locations Emission CISPR 11 Class A
IEC / EN 61010-1 RoHS Ua raws li UL Hazardous: File #E317425 Rugged
IP25 thaiv - Kev tsim kho: Plastic enclosure nrog IP25
kev ntaus nqi. Rau siv tsuas yog nyob rau hauv ib lub enclosure pom zoo. - Kev sib txuas: High compression tawb-clamp
Terminal Blocks Hlau Sawb Ntev: 0.32-0.35 (8-9 mm) Hlau Gauge
Muaj peev xwm: Plaub 28 AWG (0.32 mm) khoom, ob 20 AWG (0.61 mm) lossis ib qho
16 AWG (2.55mm) - Qhov hnyav: 1.8 ooj (51.1 g)
Cov lus qhia siv khoom
Hardware Installation
Txhim kho ib qho Module: Kev teeb tsa ntawm cov khoom yuav tsum ua raws
nrog National Electrical Code (NEC), NFPA-70 lossis Canadian Electrical
Code (CED) lossis ib qho kev tswj hwm hauv zos.
Rau 4.3 nti Host: Nws raug pom zoo tias a
relay module raug ntsia hauv Module Txoj Haujlwm 1 nkaus xwb.
FAQ
Q: Kuv yuav ua li cas yog tias muaj tej yam khoom ploj lawm los yog puas nyob rau hauv
pob?
A: Yog muaj tej yam khoom uas ploj lawm los yog puas lawm, hu rau
Liab Lion tam sim ntawd rau kev pab.
“`
PM-50 Analog Output Module
Daim ntawv qhia kev teeb tsa
z Retransmitted analog tso zis z 0 (4) rau 20 mA los yog 0 rau 10 VDC, ± 10 VDC z Tshem tawm lub davhlau ya nyob twg
Nruab PM50AO-B Drawing No. LP1146
Hloov kho 08/2024
UL CR US RAU SIV HAUV CHAW UA HAUJ LWM:
LISTED
Chav Kawm I, Division 2, Pawg A, B, C, thiab D T4A
IND.CONT. EQ.
E317425
MODULE PACKAGE CHECKLIST
Cov pob khoom no yuav tsum muaj cov khoom teev hauv qab no. Yog tias muaj tej yam khoom uas ploj lawm lossis puas lawm, hu rau Red Lion tam sim ntawd.
- Vaj huam sib luag Mount Analog Output Module - Accessory Pack - Installation Guide
DIMENSIONS Hauv nti [mm]
1.76 [44.80]
1.76 [44.80]
Hauv qab
1.34 [34.10]
SAFETY SUMMARY
Tag nrho cov kev cai hais txog kev nyab xeeb, cov lej hauv zos nrog rau cov lus qhia uas tshwm sim hauv daim ntawv no lossis ntawm cov khoom siv yuav tsum tau ua kom ntseeg tau tias muaj kev nyab xeeb ntawm tus kheej thiab tiv thaiv kev puas tsuaj rau lub cuab yeej lossis cov cuab yeej txuas nrog.
Tsis txhob siv cov khoom no los hloov cov kev ruaj ntseg interlocking. Tsis muaj cov cuab yeej siv software (lossis lwm yam khoom siv hauv lub xeev) yuav tsum tau tsim los ua lub luag haujlwm rau kev saib xyuas cov neeg ua haujlwm kev nyab xeeb lossis cov khoom tsim nyog uas tsis muaj kev tiv thaiv. Liab Lion tsis lees paub ib qho kev lav phib xaub rau kev puas tsuaj, ncaj qha lossis qhov tshwm sim, uas tshwm sim los ntawm kev siv cov cuab yeej no tsis ua raws li cov lus qhia tshwj xeeb no.
CEEB TOOM: Risk of Danger Nyeem cov lus qhia ua tiav ua ntej kev teeb tsa thiab kev ua haujlwm ntawm chav tsev.
CEEB TOOM: Risque de txaus ntshai Lire les cov lus qhia ua tiav avant l'installation thiab l'utilisation de l'appareil.
CEEB TOOM - Kev puas tsuaj tawg - Thaum nyob hauv qhov chaw muaj kev phom sij, txiav lub hwj chim ua ntej hloov lossis xaim hluav taws xob.
AVERTISSEMENT – Risque d'explosion – Dans les endroits riskeux, débranchez l'alimentation électrique avant de remplacer ou de câbler les modules.
Cov cuab yeej no tsim nyog siv rau hauv Chav Kawm I, Division 2, Pawg A, B, C, D, lossis cov chaw tsis muaj kev phom sij nkaus xwb.
Cet équipement est adapté à une utilization dans des endroits de classe I, Division 2, Groupes A, B, C, D, ou dans des endroits non riskeux seulement.
TXOJ CAI TSHIAB
PART NUMBER
Kev piav qhia
PMM000I0AN000000 Analog Output Module
Cov npe ntawm tag nrho PM-50 tsev neeg ntawm cov khoom thiab cov khoom siv tuaj yeem nrhiav tau ntawm www.redlion.net.
1
Daim duab No. LP1146
SPECIFICATIONS
Nco tseg: PM-50 4.3 inch host txais qhov siab tshaj plaws ntawm 5 modules thaum lub 3.5 inch host txais qhov siab tshaj plaws ntawm 3. Tsuas yog ib qho module ntawm txhua hom kev ua haujlwm (xws li kev sib txuas lus, relay, analog tso zis) tuaj yeem ntsia tau.
1. POWER: Lub hwj chim yog muab los ntawm PM-50 host device. Yuav tsum siv chav kawm 2 raws li National Electrical Code (NEC), NFPA-70 lossis Canadian Electrical Code (CEC), Ntu I, C22.1 lossis txwv Fais Fab (LPS) raws li IEC / EN 60950-1 lossis Limited-zog circuit raws li IEC / EN 61010-1. Lub Zog: 1.3W
2. ANALOG OUTPUT: Field installable module Hom: 0 txog 10 V, ± 10 V, 0 mus rau 20 mA, los yog 4 mus rau 20 mA Kev rho tawm rau Sensor & Tus neeg siv nkag Commons: 500 Vrms Qhov tseeb: 0 mus rau 10 V lossis ± 10 V ntau yam: 0.1-10% ntawm qhov ntsuas tag nrho: 55-0 ° C mA los yog 20 mus rau 4 mA: 20% ntawm tag nrho teev (0.1 txog 18 ° C), 28% ntawm tag nrho teev (-0.25 txog 10 ° C) Ua raws li cov zis tam sim no: 55 ohm max. (500 V max.) Yam tsawg kawg nkaus load rau voltage tso zis: 500 ohm min. (20 mA max.) Kev daws teeb meem zoo: Tag nrho 16-ntsis (Sau npe) Ua raws: 20 mA: 500 load max. (self-powered)
3. Environmental CONDITIONS: Kev khiav hauj lwm qhov kub thiab txias: -10 txog 55 °C Cia qhov kub thiab txias: -40 mus rau 85 ° C Kev vibration rau IEC 68-2-6: Kev khiav hauj lwm 5-500 Hz, 2 g Shock rau IEC 68-2-27: Kev Ua Haujlwm max. RH noncondensing Altitude: Mus txog 20 meters Kev Txhim Kho Qib II, Kev Ua Phem Txhaum Cai 0 raws li tau teev tseg hauv IEC / EN 85-2000.
4. CERTIFICATIONS THIAB CEEB TOOM: CE Pom zoo EN 61326-1 Kev Tiv Thaiv rau Chaw Ua Lag Luam Emission CISPR 11 Chav Kawm A IEC/EN 61010-1 RoHS Raws Li UL Hazardous: File # E317425 Rugged IP25 enclosure
5. KEV PAB CUAM: Plastic enclosure nrog IP25 ntsuam xyuas. Rau siv tsuas yog nyob rau hauv ib lub enclosure pom zoo.
6. CONNECTIONS: High compression tawb-clamp Terminal blocks Hlau Sawb Ntev: 0.32-0.35 "(8-9 mm) Hlau Gauge Capacity: Plaub 28 AWG (0.32 mm) khoom, ob 20 AWG (0.61 mm) lossis ib 16 AWG (2.55 mm)
7. Nyhav: 1.8 oz (51.1 g)
Kho tshiab 08 2024
HARDWARE INSTALLATION Txhim kho lub Module
CEEB TOOM - Tshem tawm tag nrho lub zog rau lub tsev ua ntej txhim kho lossis tshem tawm cov qauv. AVERTISSEMENT – Débranchez l'alimentation électrique de l'appareil avant d'installer ou de retirer des modules.
Kev teeb tsa ntawm cov khoom yuav tsum ua raws li National Electrical Code (NEC), NFPA-70 lossis Canadian Electrical Code (CED) lossis ib qho kev tswj hwm hauv zos.
Rau 4.3 nti Tus Tswv Nws raug pom zoo tias yuav tsum tau nruab ib lub relay module nyob rau hauv Module Position 1 nkaus xwb (pom hauv qab).
Sab Qab Teb
Tsheb Npog
Siab Sab
Txoj hauj lwm 1
1. Txhawm rau nruab ib lub module rau ntawm sab siab ntawm 4.3 nti tus tswv, kho cov latches ntawm lub module nrog tus tswv rooj plaub xws li cov backplane connector shroud ntawm lub module cover dlhos nrog lub backplane connector qhib nyob rau hauv lub host case.
2. Txhawm rau nruab ib lub module ntawm sab luv ntawm 4.3 nti tus tswv, tig lub module 180 degrees thiab ua kom cov latches ntawm tus tswv tsev nrog cov ntaub ntawv module kom lub I / O connector yog tig downward.
3. Ntxig tus tswv latches rau hauv qhov qhib hauv cov ntaub ntawv module los ntawm me ntsis deflecting lub latches sab hauv.
4. Nias lub module rau hauv rooj plaub tus tswv tsev sib npaug kom txog thaum lub latches koom.
5. Nruab Module Locks ntawm txhua lub module raws li qhia los ntawm kev nkag mus rau hauv ob txhais ceg ntawm Module Locks rau hauv cov qhov rooj rau hauv rooj plaub kom txog thaum lub pob ntawm Module Lock dlhos nrog lub qhov muab rau hauv rooj plaub. Nias haum lub khawm rau hauv lub qhov. Rov ua qhov kev teeb tsa no ntawm txhua qhov module hauv koj lub cev kom muab kev ruaj ntseg tshaj plaws.
6. Thaum koj ntxiv cov modules tiav lawm, lub hau rov qab yuav tsum tau muab tso rau hauv tib yam li cov modules.
2
Kho tshiab 08 2024
Rau 3.5 nti Host
Nws raug pom zoo tias yuav tsum tau nruab ib lub relay module ncaj qha mus rau sab nraum qab ntawm tus tswv tsev (pom hauv qab), tsis yog nyob rau sab nraum qab ntawm lwm qhov module.
Tsheb Npog
Txoj hauj lwm 1
1. Teem lub latches ntawm lub module nrog tus tswv rooj plaub xws li cov backplane connector shroud ntawm lub module cover dlhos nrog lub backplane connector qhib nyob rau hauv lub host rooj plaub.
2. Ntxig lub module latches rau hauv qhov qhib hauv rooj plaub ntawm tus tswv tsev los ntawm me ntsis deflecting lub latches sab hauv.
3. Nias lub module rau hauv rooj plaub tus tswv tsev sib npaug kom txog thaum lub latches koom.
4. Nruab Module Locks ntawm txhua lub module raws li qhia los ntawm kev nkag mus rau hauv ob txhais ceg ntawm Module Locks rau hauv cov qhov rooj rau hauv rooj plaub kom txog thaum lub pob ntawm Module Lock dlhos nrog lub qhov muab rau hauv rooj plaub. Nias haum lub khawm rau hauv lub qhov. Rov ua qhov kev teeb tsa no ntawm txhua qhov module hauv koj lub cev kom muab kev ruaj ntseg tshaj plaws.
5. Thaum koj ntxiv cov modules tiav lawm, lub hau rov qab yuav tsum tau muab tso rau hauv tib yam li cov modules.
Tshem tawm ib qho Module
CEEB TOOM - Tshem tawm tag nrho lub zog rau lub tsev ua ntej txhim kho lossis tshem tawm cov qauv.
AVERTISSEMENT – Débranchez l'alimentation électrique de l'appareil avant d'installer ou de retirer des modules.
Txhawm rau tshem tawm ib qho module los ntawm lub rooj sib txoos, ua ntej tshem cov module xauv siv lub me me screwdriver raws li qhia. Tom qab ntawd disengage lub latch los ntawm deflecting lub latch sab hauv los yog siv ib tug me me ntsia hlau tsav tsheb, ntxig rau nws mus rau hauv lub qhov nyob rau hauv lub sab ntawm rooj plaub, thiab prying lub latch sab hauv kom disengage lub lat. Thaum cov latches raug tshem tawm, rub lub module thiab tshem tawm ntawm lub rooj sib txoos.
Daim duab No. LP1146
THAWJ
Kev Txuas Txuas Txuas
Txhua lub hwj chim, kev tawm tswv yim thiab tso tawm (I / O) thaiv yuav tsum ua raws li Chav Kawm I, Division 2 txoj kev xaim hluav taws xob thiab ua raws li txoj cai muaj cai. Thaum txuas cov neeg sib txuas lus, koj yuav tsum siv Chav Kawm 2 Circuit Court raws li National Electrical Code (NEC), NFPA-70 lossis Canadian Electrical Code (CEC), Ntu I, C22.1 lossis Limited Power Supply (LPS) raws li IEC / TS EN 60950-1 lossis Limited-zog circuit raws li IEC / EN 61010-1.
Kev sib txuas hluav taws xob yog ua los ntawm tawb-clamp Terminal blocks nyob rau sab nraum qab ntawm lub 'meter'. Sawb thiab txuas cov hlau raws li cov lus qhia ntawm lub davhlau ya nyob twg ntawm nplooj 2.
Thov ua tib zoo saib xyuas cov ntsiab lus hauv qab no: Cov khoom siv hluav taws xob yuav tsum tau muab tso ze rau ntawm chav tsev, nrog
feem ntau tsis ntau tshaj 6 feet (1.8 m) ntawm cable ntawm cov khoom siv thiab PM-50. Qhov zoo tshaj plaws, qhov ntev tshaj plaws yuav tsum tau siv. Cov xaim siv los txuas rau PM-50 lub zog hluav taws xob yuav tsum yog tsawg kawg 22-gage xaim haum rau qhov ntsuas kub ntawm ib puag ncig uas nws tab tom teeb tsa. Yog tias siv cov kab hluav taws xob ntev dua, yuav tsum siv lub xov hlau hnyav dua. Txoj kev khiav ntawm lub cable yuav tsum tau ceev kom deb ntawm cov contactors loj, inverters, thiab lwm yam khoom siv uas yuav ua rau muaj suab nrov nrov. Kev siv hluav taws xob nrog NEC Chav Kawm 2 lossis Tsawg Lub Hwj Chim (LPS) thiab SELV ntsuas yuav raug siv. Hom kev siv fais fab no muab kev sib cais rau cov khoom siv hluav taws xob siv tau los ntawm kev phom sij voltage theem tsim los ntawm lub mains fais fab mov vim yog ib qho txhaum. SELV yog ib lub ntsiab lus rau "kev nyab xeeb ntxiv-tsawg voltage.” Safety extralow voltage circuits yuav nthuav tawm voltages muaj kev nyab xeeb los kov ob qho tib si hauv kev ua haujlwm ib txwm muaj thiab tom qab ib qho txhaum cai, xws li kev tawg ntawm ib txheej ntawm cov rwb thaiv tsev yooj yim lossis tom qab qhov tsis ua haujlwm ntawm ib qho kev tivthaiv tau tshwm sim. Ib tug tsim nyog disconnect ntaus ntawv yuav tsum tau muab los ntawm tus neeg siv kawg.
CEEB TOOM - Tus neeg siv yuav tsum tsis txhob muaj kev teeb tsa hluav taws xob uas txuas cov kev sib cais ntawm AO module rau cov tswv yim sib xws ntawm PM-50, uas kov yeej qhov kev sib cais.
1+ 2-
0-10 V ANALOG tawm
STS Status LED
3+ 4-
0-20 mA ANALOG tawm
LEDs
LED/STATE Fast blink Khoom
Lub ntsiab lus Module yog pib. Module khiav ib txwm.
Latch
3
Daim duab No. LP1146
RED LION CONTROL TECHNICAL SUPPORT
Yog tias vim li cas koj muaj teeb meem kev khiav hauj lwm, sib txuas, lossis tsuas muaj lus nug txog koj cov khoom tshiab, hu rau Red Lion's technical support.
Kev them nyiaj yug: support.redlion.net Website: www.redlion.net Sab hauv US: +1 877-432-9908 Ib Sab Nraud US: +1 717-767-6511 Ib
Chaw Nyob: Red Lion Controls, Inc. 1750 5th Avenue York, PA 17403
Kho tshiab 08 2024
COPYRIGHT
© 2024 Red Lion Controls, Inc. All Rights Reserved. Cov ntsiab lus Liab Lion thiab Red Lion logo yog cov cim lag luam ntawm Red Lion Controls. Tag nrho lwm cov cim yog cov cuab yeej ntawm lawv cov tswv.
LIMITED Warranty
(a) Red Lion Controls Inc. ("Lub Tuam Txhab") lav tias tag nrho cov khoom lag luam yuav tsum tsis muaj qhov tsis zoo ntawm cov khoom siv thiab kev ua haujlwm raws li kev siv ib txwm siv rau lub sijhawm uas tau muab rau hauv "Daim Ntawv Qhia Txog Lub Sijhawm Warranty" (muaj nyob rau ntawm www.redlion.net) tam sim no thaum lub sijhawm xa khoom ntawm cov khoom ("Lub Sijhawm Warranty"). TAB SIS TXOJ CAI SAIB XYUAS QHOV CHAW UA HAUJ LWM, lub tuam txhab ua tsis muaj kev lav phib xaub zoo li cas nrog kev hwm rau cov khoom lag luam, suav nrog txhua yam (A) kev lav phib xaub ntawm MERCHANTABILITY; (B) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; LOSSIS (C) WARRANTY NTAWM INFRINGEMENT OF INSTALLECTUAL PROPERTY RIGHTS OF A Third Party; YUAV UA LI CAS YUAV TSUM PAUB TXOG LUB CHAW UA HAUJ LWM, KEV PAB CUAM, KEV PAB CUAM, KEV UA HAUJ LWM, kev siv kev lag luam lossis lwm yam. Cov neeg siv khoom yuav tsum yog lub luag haujlwm los txiav txim siab tias cov khoom tsim nyog rau cov neeg siv khoom siv thiab qhov kev siv ntawd ua raws li txoj cai hauv cheeb tsam, xeev lossis tseem fwv. (b) Lub Tuam Txhab yuav tsis raug txim rau qhov ua txhaum cai ntawm kev lav phib xaub tau teev tseg hauv kab lus (a) yog (i) qhov tsis xws luag yog los ntawm cov neeg siv khoom tsis ua haujlwm khaws cia, teeb tsa, commission lossis tswj cov khoom raws li cov lus qhia tshwj xeeb; (ii) Cov neeg siv khoom hloov lossis kho cov khoom lag luam yam tsis tau sau ntawv tso cai ua ntej ntawm Tuam Txhab. (c) Raws li nqe lus (b), hais txog ib yam khoom zoo li no thaum lub sij hawm Warranty, Lub Tuam Txhab yuav tsum, nyob rau hauv nws ib qho kev txiav txim siab, xws li (i) kho lossis hloov cov khoom; los yog (ii) credit lossis refund tus nqi ntawm Cov Khoom uas tau muab, yog tias Tuam Txhab thov, Cov Neeg Siv Khoom yuav tsum, ntawm Tuam Txhab tus nqi, xa cov khoom zoo li no rau Lub Tuam Txhab. (d) Cov kev daws teeb meem tau teev tseg hauv PARAGRAPH (c) yuav tsum yog tus neeg siv khoom ib leeg thiab tsuas yog kev kho mob tshwj xeeb thiab lub tuam txhab muaj kev lav phib xaub rau txhua qhov ua txhaum cai ntawm qhov txwv tsis pub tshaj tawm hauv PARAGRAPH (a). Los ntawm kev teeb tsa cov khoom no, koj pom zoo rau cov lus cog tseg ntawm qhov kev lav phib xaub no, nrog rau tag nrho lwm cov kev tsis lees paub thiab kev lav phib xaub hauv daim ntawv no.
4
Cov ntaub ntawv / Cov ntaub ntawv
 |
RED LION PM-50 Analog Output Module [ua pdf] Daim ntawv qhia kev teeb tsa PM-50 Analog Output Module, PM-50, Analog Output Module, Tso zis Module, Module |