RECTORSEAL SS1 Inline Primary Float Switch

Cov ntaub ntawv khoom

Daim ntawv teev npe
(1) Cap / Float Subassembly (xws li Stem / Hlau, ob lub Cam xauv, Cap, Float)
(2) Teev
(3) Cleanout Tool
(4) Daim Ntawv Ceeb Toom (tsis pom)

Cov lus qhia installation:

US Patent No's 6,442,955 & 10,406,570

Daim ntawv ceeb toom: Tsis nyeem thiab ua raws li tag nrho cov lus ceeb toom, kev ceeb toom thiab cov lus qhia ua ntej pib kev teeb tsa tuaj yeem ua rau tus kheej raug mob thiab / lossis khoom puas tsuaj thiab ua rau tsis muaj qhov lav. Lus Cim: Cov cuab yeej no ua haujlwm nrog 3/4 thiab 1 cov kav dej.

Rau kev siv nrog 1 lub raj xa dej, ntxiv 1 x 3/4 socket couplings (tsis suav nrog) rau SS1 kawg.

Cov lus qhia siv khoom

Cov lus qhia rau 3/4 Drain Pipe

1. Qe / Hlau Cam xauv
2. Cap Float
3. Qhov siab adjustable rau rhiab heev teeb
4. Inlet
5. Xaub rau hauv qab
6. Cleanout cuab tam khw muag khoom ntawm lub cev SS1
7. Txuas mus rau lub tshuab nqus tsev los yog lub tshuab nqus tsev
8. Qhov hluav taws xob

THAWJ
Hloov

Hlau Txiv Ntseej	Los ntawm Thermostat
Liab	Dawb
Ntsuab	Daj

SPECIFICATIONS

24-V A / C, siab tshaj 1.25 Amp. Nqa Peev Xwm, 6ft., 18 AWG Lead Wires.

Safe-T-Switch SS1 los ua ke

Loj	Tus lej kos duab	Hnub tim	REV
A	ASB 00449	5/8/2020	01-001-A ib

Tsawg Warranty
Tsim los ntawm RectorSeal, LLC 2601 Spenwick Drive Houston, TX 77055, USA 800-231-3345 Ib Fax 800-441-0051 Ib
rectorseal.com

Kev piav qhia

Safe-T-Switch® Model SS1 yog ntsia hauv kab. Lub patented magnetic reed hloov tuaj yeem ntsia tau rau ntawm txoj kab nqes mus txog 45 °. Lub SS1 hloov lub hau tau yooj yim tshem tawm rau kev tu thiab kev pabcuam cov kab dej condensate.

Daim ntawv teev npe: (Fig. 1)

1.  Cap / Float Subassembly (nrog rau qia / Hlau, ob lub Cam xauv, Cap, ntab)
2.  Tee
3.  Cleanout Tool
4.  Warning Sticker (tsis pom)

Cov lus qhia installation

Daim ntawv ceeb toom: Tsis nyeem thiab ua raws li tag nrho cov lus ceeb toom, kev ceeb toom thiab cov lus qhia ua ntej pib kev teeb tsa tuaj yeem ua rau tus kheej raug mob thiab / lossis khoom puas tsuaj thiab ua rau tsis muaj qhov lav. Nco tseg: cov cuab yeej no ua haujlwm nrog 3/4 "thiab 1" cov kav dej.
Rau siv nrog 1 "dej yeeb nkab, ntxiv 1" x 3/4 "socket couplings (tsis suav nrog) rau SS1 kawg.
Cov lus qhia rau 3/4 "DRAIN PIPE

1.  Tshem tawm lub hwj chim rau lub tshuab cua txias (A / C) ntawm lub vaj huam sib luag loj.
2.  Kaw ib ¾ "stab (tsis suav) rau ntawm lub qhov hluav taws xob lub qhov hluav taws xob.
3.  Kaw lub Tee inlet mus rau ¾ "stab (Nco ntsoov tias Tee tsis yog kev taw qhia). Tee tej zaum yuav nqes mus rau qhov siab tshaj plaws ntawm 45 ° los ntawm lub qhov hluav taws xob lauj kaub.
4.  Kaw lub qhov hluav taws xob Tee rau ntawm txoj kab nqes ntws.
5.  Ntsuam xyuas tag nrho cov dej ntws thiab qhov sib txuas kom haum rau cov kav dej xau.
6.  Xaim qhov hloov mus rau cov lus qhia hauv qab WIRING (Daim duab 7).
7.  Tig ob lub Cam Locks mus rau txoj haujlwm UNLOCK (Daim duab 2). Tshem lub Cap / Float Subassembly los ntawm Tee. Kuaj qhov hloov los ntawm kev nqa lub Float thaum lub tsev ua haujlwm. Yog tias xaim raug raug, A / C chav tsev yuav nres.
8.  Ruaj ntseg Cap/Float Subassembly (A) Muab lub Cap/Float Subassembly rau ntawm Tee, ces tig ob lub Cam Locks mus rau qhov chaw LOCK (Daim duab 3). TSIS TXAUS SIAB LUB CAP / FLOAT SUBASSEMBLY rau hauv TEE. (B) Nws raug nquahu kom thawb lub qia mus rau hauv qab txoj hauj lwm kom pom cov dej rhiab tshaj plaws (Fig 4). Yog tias qhov kev xav tau yuav tsum tau hloov kho, txav lub qia nce lossis nqis raws li.
9.  Kuaj hloov rhiab heev: ntsaws dej ntws los ntawm qhov chaw teeb tsa thiab khiav A / C chav tsev kom sau lub lauj kaub ntws. ntab yuav tsum nce thiab A / C chav tsev yuav tsum nres ua ntej lub lauj kaub dhau. (A) Yog tias lub lauj kaub dhau lawm, ua kom lub zog hloov pauv los ntawm: 1 - Hloov tag nrho cov sib dhos qis, lossis 2 - thawb lub qia. (B) Yog tias lub tsev nres ntxov dhau los lossis nquag dhau lawm, txo qhov hloov pauv hloov pauv los ntawm: 1 - Hloov tag nrho lub rooj sib txoos siab dua, lossis 2 - rub lub qia.
10.  Muab Daim Ntawv Ceeb Toom Ceeb Toom tso rau ntawm qhov chaw pom, xws li cov cuab yeej siv huab cua lossis chav condenser.

Ntim

• PIB 97085
• Loj Safe-T-Switch SS1
• Qty. rau Case 24
• Lbs. rau Case 11
• Cubic Ft rau Case 1.01

THAWJ

1.  Tshem tawm lub hwj chim rau A / C chav nyob ntawm lub vaj huam sib luag loj ua ntej ua haujlwm hluav taws xob.
2.  Yog tias tsis muaj tam sim no, nws raug pom zoo tias yuav tsum tau nruab ib lub fuse inline los tiv thaiv 24-volt circuit thiab ncua sij hawm raug teeb tsa kom tsis txhob muaj kev sib tw ceev ceev ntawm cov khoom siv.
3.  Nrhiav 24-volt thermostat cable nkag mus rau hauv chav tswj huab cua.
4.  Tshem tawm los yog txiav cov hlau liab thiab txuas mus rau hloov cov hmoov txhuas siv cov txiv ntseej hlau. Txuas lwm yam hloov ua rau huab cua handler davhlau ya nyob twg. Incorporating hloov nyob rau hauv liab Circuit Court kaw tag nrho chav tsev. Yog tias muab tso rau hauv lub voj voog daj, kiv cua txuas ntxiv mus (kom inhibit pwm kev loj hlob thaum lub sij hawm tsis ntev).
5.  Reconnect fais fab mus rau chav A/C.
   SPECIFICATIONS
   24-V A / C, siab tshaj 1.25 Amp. Nqa Peev Xwm, 6ft., 18 AWG Lead Wires.

Kev kho mob

Qhib lub Cap/Float Subassembly los tshuaj xyuas, ntxuav thiab sim cov cuab yeej no tsawg kawg txhua 30 hnub thiab ua raws li txhua qhov kev ntxuav ntawm cov kav dej.

1.  Tshem lub Cap / Float Subassembly.
2.  Tshem cov khib nyiab lossis lwm yam teeb meem hauv Tee thiab ib ncig ntawm Cap / Stem Subassembly.
3.  Xyuas seb puas muaj kev puas tsuaj. Yog tias pom kev puas tsuaj, hloov cov khoom no nrog ib qho tshiab.
4.  Kuaj hloov ua haujlwm los ntawm kev ua raws li Kauj Ruam 7-9 hauv "INSTALLATION INSTALLATION INSTALLATIONS" seem saum toj no. Yog hais tias cov khoom no ua tsis tau tejyam kuaj, hloov nws nrog ib tug tshiab.
5.  Ntxiv RectorSeal's Nu-Line ™ lim dej los tiv thaiv kev tsim cov algae thiab clogs.

Reinstall thiab ruaj ntseg Cap/Stem Subassembly.
DIRECTIONAL CLEANOUT TOOL CEEB TOOM
1. Tshem tawm cov cuab yeej Cleanout los ntawm Cap/Float Subassembly.

2. Tshem Cap/Float Subassembly los ntawm Tee.

3. Tshem cov khib nyiab lossis lwm yam teeb meem hauv Tee.

4. Lub ntsej muag lub qhov hluav taws xob Cleanout qhov hluav taws xob (Fig 5) ntawm txoj kab ntws los ntxuav (txawm yog dej ntws los yog nqes dej, nyob ntawm qhov chaw thaiv). Ntxig lub Cleanout Tool rau hauv Tee.

5. Txuas lub twj tso kua mis (los yog lub tshuab nqus tsev) (xws li RectorSeal Mighty Pump™, los yog RectorSeal Lineshot™) rau Cleanout Tool's inlet. Lub tshuab nqus tsev twj los yog lub tshuab nqus tsev kom txog rau thaum lub blockage tshem tawm.

6. Ua tiav kaw lub tshuab nqus tsev (lossis nqus tsev) thiab txiav tawm ntawm Cleanout Tool.

7. Tshem tawm cov cuab yeej Cleanout los ntawm Tee thiab kaw nws mus rau Cap / Float Subassembly (Fig 6).

8. Nruab lub Cap/Float Subassembly rov qab rau hauv Tee. Tig ob lub Cam Locks mus rau txoj haujlwm LOCK.

COV NTAUB NTAWV TSEEM CEEB

1.  Cov cuab yeej no yuav tsum tau teeb tsa nruj me ntsis raws li cov chaw tsim khoom cov lus qhia (kom paub meej tias kev ua haujlwm zoo) thiab ua raws li tag nrho cov kav dej hauv zos, cov dej ntws thiab cov lej hluav taws xob.
2.  Hluav taws xob poob siab. Disconnect fais fab mov ua ntej txhim kho cov khoom no kom tsis txhob muaj hluav taws xob poob siab thiab/los yog cov khoom puas. Siv hauv Chav Kawm 2 (thermostat) Circuit Court nkaus xwb, tsis pub tshaj 24-volts, 1.25 amps kom tsis txhob muaj kev puas tsuaj lossis hluav taws kub.

 

1.  Cov cuab yeej no yuav tsis ntes cov clogs tshwm sim los ntawm qhov chaw teeb tsa.
2.  Yog tias tsis muaj tam sim no, nws raug pom zoo kom muab lub fuse thiab lub sijhawm ncua sijhawm, los tiv thaiv 24-volt Circuit Court thiab tsis txhob siv cov khoom siv ceev ceev, ua ntej txhim kho cov khoom no.
3.  Cov khoom no yog tsim los siv hauv dej xwb. Tsis yog siv nyob rau hauv lub xub ntiag ntawm flammable kua los yog vapors.
4.  Xa mus rau HVAC cov cuab yeej siv ua haujlwm tsim nyog ua ntej txhim kho cov khoom no.
5.  Tsis txhob siv ntawm ob lub tshuab compressor.

Tsawg Warranty

RectorSeal, LLC ua rau Limited Express Warranty tias thaum cov lus qhia rau kev cia thiab tuav peb cov khoom ua raws peb lav peb cov khoom kom tsis txhob muaj qhov tsis xws luag. Qhov no txwv kev lees paub yog tshaj tawm hauv ib qho kev lees paub lossis kev lav tawm ntawm cov tub luam lossis kev lav ris rau ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm ib feem ntawm cov ntaub ntawv ntawm cov rectorseal, LLC. Txoj kev daws teeb meem rau kev ua txhaum cai ntawm Limited Express Warranty yuav tsum tau them rov qab ntawm tus nqi yuav khoom. Tag nrho lwm yam kev lav phib xaub yog tsis lees paub thiab tsis lees paub, thiab RectorSeal, LLC yuav tsum tsis txhob raug txim rau kev puas tsuaj los yog qhov tshwm sim.
Tsim los ntawm
RectorSeal, LLC
2601 Spenwick Drive  Houston, TX 77055, USA  800-231-3345 Ib  Fax 800-441-0051 Ib  rectorseal.com
Ib lub tuam txhab CSW Industrials. RectorSeal, lub logos thiab lwm yam khoom lag luam yog cov cuab yeej ntawm RectorSeal, LLC, nws cov koom tes lossis nws cov ntawv tso cai thiab raug tiv thaiv los ntawm kev cai lij choj, kev lag luam thiab lwm yam kev cai lij choj, thiab yuav tsis siv yam tsis tau tso cai. RectorSeal tseg txoj cai los hloov cov kev qhia tshwj xeeb yam tsis tau ceeb toom ua ntej. © 2020 RectorSeal. Txhua txoj cai. R50109-0620

Cov ntaub ntawv / Cov ntaub ntawv

RECTORSEAL SS1 Inline Primary Float Switch [ua pdf] Tus tswv phau ntawv SS1 Inline Primary Float Switch, SS1, Inline Primary Float Switch, Primary Float Switch, Float Switch, Hloov

Cov ntaub ntawv

• Cov neeg siv phau ntawv