Txheej txheem daws teeb meem Automation Control PSC6194 Controller Readout thiab Tswj System

Khoom Tshajview

Txhawm rau tswj cov kua thiab roj ntws ntws, Cov Txheej Txheem Kev daws teeb meem Corp. muaj cov kev cai tsim kev daws teeb meem uas muaj 4.3 "xim touchscreen PLC nyeem ntawv thiab tswj qhov system. Lub touchscreen enables tus neeg siv tau yooj yim view lossis hloov ua haujlwm. Lub PSC6194 maub los ua lub zog siv hluav taws xob, txog li ob metres thiab ob tus tswj hwm, thiab los nruab nrog Analog IOs thiab Modbus interface. Tus maub los kuj tseem muab cov ntaub ntawv kaw cov ntaub ntawv ntsuas.

Zaub

Controller muaj cov hauv qab no:

1. 4.3 "xim touchscreen PLC
2. Flow Controller - Chaw taws teeb tswj analog IO kev sib txuas (Ch. 1 & 2)
3. Flow Meter - Chaw taws teeb tswj analog IO kev sib txuas (Ch. 3 & 4)
4. RS-485 / Fais fab (+) - sib txuas lus thiab lub zog ntsuas / tswj ntawm Modbus
5. Ethernet Lan1
   • Program PLC
   • Chaw nres nkoj kev sib txuas lus ntxiv
6. Hwj chim Chaw nres nkoj -
   • 120 Vac phab ntsa plug txuas
   • Plug yuav tsum tau muab tshem tawm rau Fais Fab

Kev sib txuas 

Hwj chim Up 

Qauv Ntsiab

Tus qauv tseem ceeb ntawm daim ntawv lo khoom muaj cov ntaub ntawv hais txog cov khoom siv ntawm cov cuab yeej raws li kev txiav txim. Cov khoom tshwj xeeb tuaj yeem rov qab tau nrog daim duab hauv qab no (Mini-Cori maub los example) ua.
Xa mus rau Kev Sib Txuas Lus (I/O) los txiav txim seb Broncho cov cuab yeej yog nruab nrog Modbus kev sib txuas lus.

Kev teeb tsa Analog

Txuas Bronkhorst flow instruments rau PSC maub los ntawm RS232, Channel 1 - 4. Bronkhorst cov twj paj nruag yuav tsum tau teeb tsa hauv Analog hom kev sib txuas lus ntawm RS232.

Kev teeb tsa Modbus

Txuas Bronkhorst flow instruments rau PSC maub los ntawm RS485 / Fais fab. Cov cuab yeej Bronkhorst yuav tsum tau teeb tsa hauv Modbus Hom kev sib txuas lus.

Kev teeb tsa kev sib txuas lus yog:
Baud tus nqi: 38400 Parity: Txawm Cov ntaub ntawv me me: 8 Nres Bit: 1	MFC #1: Chaw Nyob 1 MFC #2: Chaw Nyob 2 MFM#1: Chaw Nyob 3 MFM#2: Chaw Nyob 4

Configure Control Mode

Txhawm rau hloov Bronkhorst ntsuas los ntawm Analog mus rau Modbus, lossis hloov pauv, hom kev tswj yuav tsum tau teeb tsa ntawm FlowDDE
(https://www.bronkhorst.com/en-us/products-en/accessories-and-software/flowware/flowdde/).

Txuas rau FlowDDE
Hauv cov lus ntu cov txheej txheem dav dav los pib ua haujlwm rau cov neeg siv khoom siv nrog FlowDDE server tau piav qhia hauv plaub kauj ruam:

1. Txuas lub cuab yeej mus rau COM chaw nres nkoj ntawm PC
2. Teeb tsa kev sib txuas lus
3. Pib qhov kev sib txuas lus
   • Nias F3 los yog
   • Kev sib txuas lus tab> Qhib Kev Sib Txuas Lus
4. Tos kom txog thaum FlowDDE npaj txhij
   • Lus Nug: "Server yog nquag thiab npaj rau txhua tus neeg siv khoom"

Yog xav tau kev qhia ntxiv, thov xa mus rau FlowDDE Phau Ntawv Qhia pom nyob rau hauv qhov txuas saum toj no.

Analog rau Modbus Configuration
Tom qab qhib kev sib txuas lus, siv cov kauj ruam hauv qab no los hloov Kev Tswj Hom los ntawm kev ua haujlwm Analog mus rau Modbus ua haujlwm:

1. FLOW-BUS tab > Test Flow-BUS thiab DDE
   • Los yog nias F6
2. Xaiv cov nram qab no parameter rau view ib txhij
   • Parameter 7 – InitReset
   • Parameter 12 – IO Status
3. Teem parameter InitReset rau 64 (Xauv)
4. Nyeem parameter IO Status
5. Tshem tawm 64 ntawm tus nqi nyeem
   • Tus nqi tshiab Parameter: 15 lossis 11
6. Sau tus nqi tshiab rau parameter IO Status
7. Teem parameter InitReset rau 82 (xauv)
8. Rov pib dua Bronkhorst instrument
   • InitReset yuav tsum tau xauv / xauv rau txoj kev tswj tshiab kom nyob twj ywm tom qab qhov ntsuas tau rov pib dua

Modbus rau Analog Configuration
Tom qab qhib kev sib txuas lus, siv cov kauj ruam hauv qab no los hloov Txoj Cai Tswjfwm los ntawm Modbus ua haujlwm rau kev ua haujlwm Analog:

1. FLOW-BUS tab > Test Flow-BUS thiab DDE
   • Los yog nias F6
2. Xaiv cov nram qab no parameter rau view ib txhij
   • Parameter 7 – InitReset
   • Parameter 12 – IO Status
3. Teem parameter InitReset rau 64 (Xauv)
4. Nyeem parameter IO Status
5. Ntxiv 64 los ntawm tus nqi nyeem
   • Tshiab Parameter Tus Nqi: 79
6. Sau tus nqi tshiab rau parameter IO Status
7. Teem parameter InitReset rau 82 (xauv)
8. Rov pib dua Bronkhorst instrument
   • InitReset yuav tsum tau xauv / xauv rau txoj kev tswj tshiab kom nyob twj ywm tom qab qhov ntsuas tau rov pib dua

Kev ua haujlwm yooj yim

Lub ntsiab lus qhia
Cov zaub muaj cov nram qab no readout cheeb tsam:

1. Txheej txheem – nyeem ntawv thiab teeb cov ntsiab lus Bronkhorst meter/controllers
2. Instrument Range – teem tag nrho raws li ntsuas
3. Trending – Flow vs. Time plots for each instrument
4. Kev sib txuas lus hom - Analog tswj lossis digital tswj
5. Hnub thiab Lub Sijhawm Chaw
6. Totalizer * - Tsuas yog muaj nyob ntawm Modbus (Digital Controlled) thiab Coriolis Instrument

Tus neeg siv interface
Analog tswj Digital tswj	Kev sib txuas lus hom PSC6194 maub los yog nruab nrog ob hom kev sib txuas lus: Analog tswj – Analog IOs, 4 – 20 mAsignalDigital tswj - Modbus kev sib txuas lus Modbus nta: Tus nqi ntom ntom Temperature Values Totalizer  Ob Hom Kev Sib Txuas Lus txhawb nqa txog plaub lub cuab yeej, 2 Cov Tswj Flow Mass thiab 2 Cov Flow Meters.
Txheej txheem Screen	Txheej txheem Screens Cov Txheej Txheem Txheej Txheem yuav tso saib cov nqi ntws, teeb tsa cov ntsiab lus thiab lwm yam txheej txheem rau cov cuab yeej Bronkhorst.Cov txheej txheem cov ntxaij vab tshaus muaj xws li:  Xub: Txhawm rau taug qab ntawm cov txheej txheem cov ntxaij vab tshausCov xwm txheej: Ntsuab - sib txuas lus, grey - tsis sib txuas lus, ntsais muag - yuam kev Instrument Label: (Blue Label) Qhia cov channel thiab ntsuas tus lej ntawm lub kaum sab xis saum toj. Chav nyob: (Black Label) Txhawm rau teeb tsa lub ntsuas ntsuas ntsuas (piv txwv li g / h)Tsev: Txhawm rau rov qab mus rau Main Screen * Qhov ntom ntom, Kub thiab Totalizer qhov tseem ceeb tsuas yog muaj nyob ntawm Modbus
Txheej txheem Screen Keyboard	Labeling Units Txhawm rau hloov kho Cov Cuab Yeej Siv, nias lub cim dub, raws li pom los ntawm X ntawm daim duab, kom cov keyboard tshwm. (xws li g/hr, kg/hr, thiab lwm yam.) Siv lub touchscreen los sau lub ntsuas thiab nias ENTER.ENTER – Txuag tus nqi thiab rov qab mus rau yav dhau los screen. ESC - Rov qab mus rau qhov screen dhau los yam tsis tau txuag.

Txheej txheem Screen Teeb Point Warning	Kho kom raug teeb cov ntsiab lus Txhawm rau hloov kho qhov teeb tsa ntawm cov twj paj nruag, nias lub npov naj npawb, raws li qhia los ntawm X nyob rau hauv daim duab, rau tus lej ncoo tshwm. Teem tus nqi thiab nias ENTER. No Border - Siv tau Set Point Yellow ciam teb - Teeb Point tau teeb tsa saum toj no qhov Instrument Range. Liab Ciam Teb - Lub Set Point yog kaw vim Totalizer. Thov saib Totalizer nqis kom paub meej.   ENTER - Txuag tus nqi thiab rov qab mus rau qhov screen dhau los. ESC - Rov qab mus rau qhov screen dhau los yam tsis tau txuag.  Tus nqi yuav tsum nyob hauv qhov ntsuas qhov ntau, lossis lub teeb pom kev zoo yuav pib ntsais nrog qhov yuam kev.
Instrument Range Screen Numerical Keypad	Instrument Range Qhov Instrument ranges yuav tsum teem rau lub TAG NRHO Kev khiav ntau yam ntawm Bronkhorst ntsuas, qhia ntawm daim ntawv ntsuas. Txhawm rau hloov kho ntau yam, nias rau ntawm tus nqi sib thooj SPAN, raws li qhia los ntawm X ntawm daim duab, rau Numeric Keyboard. ENTER - Txuag tus nqi thiab rov qab mus rau qhov screen dhau los. ESC - Rov qab mus rau qhov screen dhau los yam tsis tau txuag. HOME - Rov qab mus rau Main Screen
Txheej txheem Screen Paub meej Screen	View Paub meej Rau view cov ntsiab lus ntsuas, nias lub BLUE daim ntawv lo, raws li qhia los ntawm X ntawm daim duab. Qhov screen tom ntej no qhia cov ntsiab lus ntsuas hauv qab no: Instrument Number Qauv nab npawb Serial Number Hom kua dej Nias lub pob nyem rau ntawm Cov Lus Qhia kom rov qab mus rau qhov screen dhau los.
Txheej txheem Screen Cov nyees khawm	Qhov System Menu Txhawm rau nkag mus rau Qhov System Menu, nias lub kaum sab xis saum toj, raws li pom los ntawm X ntawm daim duab, rau cov Function Buttons kom tshwm sim.Xaiv lub SYSTEM khawm rau view lub System Menu. ESC - Rov qab mus rau qhov screen dhau los yam tsis tau txuag.

Trending Screen

Kev sib tw Cov ntxaij vab tshaus Trending piv qhov Flow vs. Time values ​​for each instrument. Cov cuab yeej cuab tam tau tso tawm rau ntawm daim ntawv lo dub. XUB – taw kev ntawm lub vijtsam HOME – Rov qab mus rau Qhov Tseem Ceeb

Totalizer
Main ScreenTxheej txheem Screen	Nkag mus rau Totalizer Lub Totalizer tsuas yog muaj nyob ntawm Modbus rau Coriolis Instruments. Cov Totalizer tuaj yeem nkag tau los ntawm Lub Ntsiab Tshuaj lossis Cov Txheej Txheem Txheej Txheem Txheej Txheem, MFC # 1 thiab 2, raws li qhia los ntawm X.
Totalizer Screen	Totalizer Screen Lub Totalizer Screen qhia ob cais Totalizers rau ob qho tib si MFC# 1 thiab 2. Txhua Totalizer muaj cov kev teeb tsa hauv qab no: Hom - Hom ntawm Totalizer sib raug Txwv – Totalizer txwv/batch loj nyob rau hauv units xaiv nrog parameter Unit. Tus nqi - Tam sim no tus nqi tag nrho hauv cov units xaiv nrog Unit. Unit - Qhov no parameter muaj lub npe ntawm lub totalizer readout unit. Setpoint Mode – Qhia meej seb puas yuav hloov lub setpoint tom qab mus txog qhov txwv tag nrho. Tshiab Setpoint(%) - Tshiab (kev nyab xeeb) setpoint thaum lub totalizer txwv mus txog rau Totalizer Reset. Pib dua Tus Nqi - Rov pib dua tus nqi tag nrho nkaus xwb. Pib dua Totalizer - Rov pib dua tus nqi tag nrho thiab qhov chaw teeb tsa tshiab. Txhua qhov kev teeb tsa yog kho tau. EXIT - Rov qab mus rau qhov screen yav dhau los yam tsis tau txuag. HOME - Rov qab mus rau Main Screen
OFF Hom Up hom Mus rau Hom	Totalizer Hom Hom ntawm Totalizer sib xws tuaj yeem xaiv thiab hloov pauv los ntawm Totalizer Screen.Cov hom avaliable yog: OFF - Totalizer tawm (default) UP – suav tsis tu ncua UP TO – suav mus txog rau qhov txwv (teeb tsa los ntawm Totalizer Limit) Txhua hom yuav tso saib cov chaw sib txawv: OFF -  Hom nkaus xwb UP – Hom,  Tus nqi,  Unit and Pib dua khawm UP RAU - Hom, Limit, Tus nqi, Chav tsev, Tshiab Setpoint hom, New Setpoint thiab Pib dua khawm
Configure Units Cov nplooj ntawv	Totalizer Unit Txhawm rau teeb tsa cov units tag nrho, nias lub npov hauv qab ntawm Daim Ntawv Sau Npe, raws li qhia los ntawm X, txhawm rau taug qab mus rau qhov sib thooj Cov Chav Tsev Page.Ib zaug ntawm Chav Tsev, nias lub qhov xav tau ib zaug thiab tso cai rau 5 vib nas this los hloov kho. Cov chav tsev configured yuav raug tso tawm kom pom nyob rau hauv qab sab laug ces kaum.Cov chav muaj rau configure los ntawm yuav nyob ntawm seb hom cuab yeej. Cov cuab yeej hom yuav tsum tau teeb tsa los ntawm FlowDDE.Instrument Hom: Mass Flow, Volume Flow, Standard Volume Flow, Volume Flow (Qhov Tseeb) Totalizer Unit txhawb cov txiaj ntsig hauv qab no: Volume Flow – l, mm3, ml, cm3, ul, m3 Normal/Standard Volume Flow – ln, mm3n, mln, cm3n, uln, dm3n, m3n, ls, mm3s, mls, cm3s, uls ,dm3s ,wb Mass Flow - g, mg, ug, kg EXIT - Rov qab mus rau qhov screen yav dhau los yam tsis tau txuag. HOME - Rov qab mus rau Main Screen
Configure Limit	Totalizer Limit Lub Totalizer txwv yog tso tawm nyob rau hauv units xaiv nrog parameter Unit. Txhawm rau hloov Totalizer Limit, nias lub npov tus lej hauv qab Limit Label, raws li qhia los ntawm X. Liab Ciam Teb - thaum tus nqi nce mus txog Limit. ENTER - Txuag tus nqi thiab rov qab mus rau qhov screen dhau los. ESC - Rov qab mus rau qhov screen dhau los yam tsis tau txuag.
Configure New Setpoint Mode	Tshiab Setpoint hom Txhawm rau teeb tsa hom tshiab Setpoint, nias lub checkbox kom qhib qhov chaw, raws li qhia los ntawm X.Grey - Tsis muaj qhov hloov pauv. Ntsuab - Active; Hloov setpoint rau New Setpoint.
Configure New Setpoint	Tshiab Setpoint Txhawm rau teeb tsa New Setpoint thaum muaj kev txwv, nias lub percentage tus nqi, raws li qhia los ntawm X. Liab Ciam Teb - thaum tus nqi nce mus txog qhov txwv, qhov teeb tsa tshiab raug kaw kom txog thaum Totalizer Reset raug tua. Tshiab Setpoint yog qhov feem pua ​​​​tus nqi ntawm FULL Instrument range.Examples: Tshiab Setpoint ntawm 0%: Tag Nrho Cov Cuab Yeej: 500 grams / hr Setpoint: 400 grams / hrThaum txwv tsis pub dhau, Tshiab setpoint tus nqi: 0 grams / hr Tshiab Setpoint ntawm 50%: Tag Nrho Cov Cuab Yeej: 500 grams / hr Qhov hnyav: 400g / h Thaum txog qhov txwv, Tshiab setpoint tus nqi: 250 grams / hr TSEEM CEEB: Cov cuab yeej yuav tsis tso tseg tom qab kev txwv tsis pub dhau qhov tshwj tsis yog Tshiab Setpoint Hom yog nquag / ntsuab THIAB Tshiab Setpoint yog 0%.
Pib dua Tus Nqi	Pib dua Tus Nqi Txhawm rau rov pib tus nqi nkaus xwb, nias thiab tuav lub pob Rov Pib Dua Tus Nqi rau 1s, raws li qhia los ntawm X. Tus nqi yuav rov pib dua tam sim.
Pib dua Totalizer	Pib dua Totalizer Txhawm rau rov pib dua Tus Nqi thiab Teeb Meem, nias thiab tuav lub pob Rov pib Totalizer rau 1s, raws li qhia los ntawm X. Cia li 5 vib nas this rau Totalizer rov pib dua.

PROCESS SOLUTIONS CORP.
(281)-491-3833
SALES@PSCTEXAS.COM

Cov ntaub ntawv / Cov ntaub ntawv

Process Solutions Automation Control PSC6194 Controller Readout and Control System [ua pdf] Cov neeg siv phau ntawv qhia PSC6194 Controller Readout thiab Control System, PSC6194, Controller Readout thiab Control System, Readout thiab Tswj System, Tswj System

Cov ntaub ntawv

• Cov neeg siv phau ntawv