Cov ntsiab lus
zais
Prestel VCS-MA8C-CW Digital Array Microphone
Khoom Specifications
- Microphone Hom: Digital Array Microphone
- rhiab heev: -38dBFS
- Signal Noise to Ratio: 65 dB (A)
- Zaus teb: 50Hz ~ 16kHz
- Pickup Range: 3m
- Tsis Siv Neeg Nta:
- Automatic Echo Cancellation (AEC): Txhawb nqa
- Automatic Noise Suppression (ANS): Txhawb nqa
- Tsis Siv Neeg Gain Control (AGC): Txhawb nqa
- Network Interface:
- 1 x UP: Up cascade network interface
- 1 x DOWN: Down cascade network interface
Cov lus qhia siv khoom
Kev teeb tsa khoom
- Nco tseg: Daim duab installation yog rau siv xwb. Lub bracket tsis yog tus qauv. Thov xa mus rau qhov khoom tiag tiag rau cov khoom siv installation.
Network Application
- Connect the Microphone to a PC using the USB cable. Connect the SPKOUT audio output to active speakers or power ampcov neeg ua neej nyob.
PoE kev twb kev txuas:
- Connect the Microphone to a terminal using the PoE network cable. Connect the SPKOUT audio output to active speakers or power ampcov neeg ua neej nyob.
Analog 3.5mm Connection:
- Connect the Microphone to an interactive terminal recording host using the AECOUT and AECIN interfaces.
Daim ntawv teev npe
| Lub npe | Ntau | Lub npe | Ntau |
| Microphone | 1 | Chaw taws teeb tswj (yeem) | 1 |
| USB Cable | 1 | Mounting Bracket (yeem) | 1 |
| Suab Cable | 1 | Phau Ntawv Qhia Pib Ceev | 1 |
| Network Cable | 1 | - | - |
Zoo thiab Interface
| Tsis muaj. | Interface | Kev piav qhia |
| 1 | UP | Up a cascade network interface, cascading up devices through a PoE network cable. |
| 2 | USB | USB audio interface rau txuas mus rau USB host lossis powering lub microphone. |
| 3 | AECREF | Disable. |
| 4 | POM | Down cascade network interface, cascading down devices through a PoE network cable. |
| 5 | AECOUT | Audio output interface, sound collected by the local microphone can be output to the terminal or recording host. |
| 6 | SPKOUT | Audio output interface (playing remote audio): The audio signal sent from the remote classroom can be output to the local speaker for playback. |
Khoom nta
Digital Array Microphone, Lub Suab Ntev Ntev
- High SNR ring microphone array design, clear pickup from a long distance. Let the speaker move around more freely in the room and get rid of the constraints. Blind Beamforming, Automatic Alignment to Speaker.
- Qhov muag tsis pom beamforming, qhov tseeb qhov chaw, hloov suab thaj chaw ib puag ncig tuaj yeem ua tiav lub suab txhim kho thiab muaj peev xwm tiv thaiv kev cuam tshuam zoo dua.
Ntse Suab Algorithms, Ntshiab Ntuj Suab
- Built-in powerful audio processing unit, ultra-low signal processing delay; Adaptive fast convergence algorithm, voice intelligent tracking, intelligent noise reduction, echo cancellation, automatic gain, de-reverberation, and other advanced technologies, double-talk without suppression, you can easily listen in noisy environments. For ordinary users, there is no need for professional tuning, and it can be used for regular conference applications when it is turned on.
- For enthusiast users, you can also open the EQ interface and enter the professional tuner mode for personalized high-end tuning.
PoE Cascade, Txawm tias Kev Pabcuam ntawm Chav Rooj Sab Laj tuaj tos
- Flexible setting of master and slave devices, supporting up to 6 microphone PoE cascade, distributed pickup and interaction, evenly covering medium and large conference room spaces.
Standard Interface, Plug thiab Ua Si
- Equipped with standard USB and 3.5mm audio interfaces, the device is plug-and-play and can meet the dual-mode application of digital and analog audio.
- Hoisting/Wall/Ceiling Mounting, Simple and Flexible Deployment Support: hoisting, wall, ceiling mounting, flexible and fast deployment, and reducing operation and maintenance costs.
Khoom Specifications
|
Suab Nta |
|
| Hom Microphone | Omnidirectional Microphone |
| Array Microphone | Built-in 6 mics to form a ring array microphone, 360° omnidirectional pickup |
| rhiab heev | -38dBFS |
| Teeb liab-rau-suab tsis piv | 65 dB (A) |
| Zaus teb | 50Hz ~ 16kHz |
| Pickup Range | 3m |
| Tsis Siv Neeg Echo Cancellation (AEC) | Txhawb nqa |
| Tsis Siv Neeg Noise Suppression (ANS) | Txhawb nqa |
| Tsis Siv Neeg Gain Control (AGC) | Txhawb nqa |
|
Kho vajtse Interfaces |
|
| Kev Sib Tham Network | 1 x UP: Up cascade network interface |
| 1 x DOWN: Down cascade network interface | |
| USB interface | 1 x USB: USB audio interface |
| Suab Interface | 1 x AECOUT: 3.5mm audio output interface |
| 1 x SPKOUT: 3.5mm audio output interface | |
|
General Specifications |
|
| Hom Cascade | PoE network interface |
| Fais fab mov | Ib lub microphone USB / cascade PoE fais fab mov |
| Dimension | Φ170mm x H 40mm |
| Net nyhav | Txog 0.4 Kg |
- Nco tseg: Cov khoom specifications yuav hloov tsis tau ceeb toom.
Kev teeb tsa khoom
- Nco tseg: Daim duab installation yog rau siv xwb. Lub bracket tsis yog tus qauv. Thov xa mus rau qhov khoom tiag tiag rau cov khoom siv installation.
Network Application
Tib hom
- Kev sib txuas USB
- Kev sib txuas PoE
- Analog 3.5mm Kev sib txuas
Hom Cascade
- Kev sib txuas PoE
- Kev sib txuas USB
- Analog 3.5mm Kev sib txuas
Daim ntawv thov Scenario
- Nco tseg: Daim duab schematic yog rau siv xwb. Thov xa mus rau qhov tseeb daim ntawv thov scenario rau cov cuab yeej thiab installation.
Scenario Installation Classroom
- For classroom installation, please refer to the figure below. The USB interface is used as the power supply port of the microphone, and can be connected to the socket or adapter with a USB interface.
- Lub zog mov voltage is DC 5V. The SPKOUT audio output interface is output to active speakers or power amplifiers through a 3.5mm audio cable.
- It is recommended to use low-latency active speakers first, and the speaker experience will be better.
Kev teeb tsa chav kawm
Kev Kho Mob Microphone Installation
- Installation Qhov siab: In theory, the closer the microphone is to the speaker, the better, but considering that it is too low, there may be a risk of students accidentally reaching out and hitting the speaker, causing damage or falling. principle, while considering security and flexible processing.
- Installation Method and Location: It is hoisted with a boom, and the position near the podium is centered horizontally, and the microphone disk facing the podium area, focusing on picking up the teacher’s lecture sound in the podium area.
Installation hais lus
- Installation Qhov siab: The recommended height from the ground is 2.0m-2.6m.
- Installation Method and Location: It is wall-mounted with brackets. It is recommended to install it in the middle and front of the walls on both sides of the classroom.
Qhov (socket) Installation
- Ib qho kev xaiv lub qhov (socket) vaj huam sib luag nrog lub qhov (socket) USB tuaj yeem nruab ib sab ntawm tus hais lus kom nkag tau yooj yim rau lub microphone thiab hais lus. Nws tuaj yeem siv tau los ntawm USB adapter lossis ncaj qha siv lub cuab yeej nrog USB interface (TV lossis cov zaub loj, thiab lwm yam).
- Thaum lub microphone thiab hais lus txuas nrog tib lub phab ntsa ntsaws rau lub hwj chim, lub microphone thiab tus hais lus yuav tsum tau qhib lossis kaw tib lub sijhawm.
Hloov Installation
- Koj tuaj yeem xaiv ib lub vaj huam sib luag hloov, nruab rau sab ntawm lub qhov rooj lossis lub qhov rooj dub, nrog rau daim ntawv lo, yooj yim rau cov xibfwb qhib thiab kaw.
Teeb meem thiab kev daws teeb meem
- Howling appears at startup
- Rau example, nws yog ib txwm rau lub microphone xuav me ntsis thaum nws nyuam qhuav pib. Thaum lub cuab yeej nyuam qhuav pib, nws yuav tsum kawm kom hloov mus rau qhov chaw nyob ib puag ncig lub suab, thiab nws yuav nres tau tom qab kev kawm tiav.
- Tsis tu ncua quaj
- Rau example, when the USB is connected to the computer, confirm whether the listening function is turned on, and check whether the audio input and output wiring are looped back.
- Lub suab reverberation tsis meej
- First, check whether the room is too small and the reverberation is too large, and then check the settings of the power amplifier or speaker EQ to see if the low-frequency part is adjusted too much.
FAQ
Can I use the microphone without connecting it to a PC?
Yes, you can use the microphone in standalone mode by connecting it to an audio output device using the provided cables.
Dab tsi yog qhov pom zoo fais fab mov voltage rau lub microphone?
Qhov pom zoo fais fab mov voltage is DC 5V when using the USB interface for power.
How can I improve the speaker experience when using active speakers?
It is recommended to use low-latency active speakers for a better speaker experience.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Prestel VCS-MA8C-CW Digital Array Microphone [ua pdf] Cov neeg siv phau ntawv qhia VCS-MA8C-CW Digital Array Microphone, VCS-MA8C-CW, Digital Array Microphone, Array Microphone, Microphone |