5180 Nws. thiab Humidity- Cov Ntaub Ntawv Logger
Phau ntawv qhia
Kev ceev faj txog kev nyab xeeb
Cov khoom no ua raws li cov cai ntawm European Community Directive 2014/30/EU (Electromagnetic Compatibility).
Cov kev ceev faj txog kev nyab xeeb hauv qab no yuav tsum tau ua ua ntej ua haujlwm. Cov kev puas tsuaj uas tshwm sim los ntawm kev tsis ua raws li kev tiv thaiv kev nyab xeeb no raug zam los ntawm kev thov kev cai lij choj txawm li cas los xij:
- Ua raws li cov ntawv ceeb toom thiab lwm cov ntaub ntawv ntawm cov khoom siv.
- Tsis txhob muab cov cuab yeej coj mus rau tshav ntuj ncaj qha lossis qhov kub thiab txias, av noo lossis dampcaj pas.
- Tsis txhob muab cov cuab yeej ua rau muaj kev cuam tshuam los yog muaj zog vibrations.
- Tsis txhob khiav cov khoom siv ze ntawm cov hlau nplaum muaj zog (mos, transformers thiab lwm yam).
- Khaws cov hlau kub kub los yog phom kom deb ntawm cov khoom siv.
- Tso cai rau cov khoom siv kom ruaj khov ntawm chav tsev kub ua ntej ntsuas ntsuas (tseem ceeb rau kev ntsuas qhov tseeb).
- Hloov lub roj teeb sai li sai tau thaum lub roj teeb qhia "
” tshwm. Nrog lub roj teeb tsawg, lub ntsuas hluav taws xob tuaj yeem tsim cov ntawv nyeem tsis raug. - Tshem tawm lub roj teeb thaum lub ntsuas yuav tsis siv rau lub sijhawm ntev.
- Periodically so lub txee nrog adamp ntaub thiab nruab nrab detergent. Tsis txhob siv cov tshuaj abrasives lossis cov kuab tshuaj.
- Tsis txhob khiav lub 'meter' ua ntej lub txee tau
kaw thiab screwed yam xyuam xim raws li lub davhlau ya nyob twg tuaj yeem nqa voltage. - Tsis txhob muab lub ntsuas ntsuas rau hauv qhov chaw tawg, muaj cov khoom ua rau mob.
- Tsis txhob hloov lub 'meter' nyob rau hauv txhua txoj kev.
- Qhib cov cuab yeej siv thiab kev pabcuam- thiab kho cov haujlwm yuav tsum tsuas yog ua los ntawm cov neeg ua haujlwm tsim nyog.
- Kev ntsuas ntsuas tsis yog rau cov me nyuam txhais tes.
Ntxuav lub txee
Ntxuav nkaus xwb nrog adamp, cov ntaub mos mos thiab cov khoom siv muag khoom me me uas siv hauv tsev. Xyuas kom tsis txhob muaj dej nkag mus rau hauv cov khoom siv los tiv thaiv kev ua haujlwm luv luv thiab kev puas tsuaj rau cov khoom siv.
Taw qhia
Cov ntaub ntawv logger no rau qhov ntsuas kub, av noo thiab ntsuas kub nrog ob K-Type probes ntxias nrog lub sijhawm kaw ntev thiab plaub lub sijhawm sau ntawv nyeem nrog lub sijhawm sau cia, uas tuaj yeem khaws 67,000 nyeem ib qho haujlwm hauv lub cim xeeb sab hauv thiab tom qab ntawd rub tawm cov ntaub ntawv kaw ntawm USB.
Nta
► Cov ntaub ntawv logger nrog lub cim xeeb sab hauv mus txog 67,000 nyeem ib qho kev ntsuas
► Ib txhij kaw ntawm huab cua av noo, huab cua kub thiab ob hom-K kub sensors ntxiv
► Ob-kab LCD zaub nrog ceeb toom LEDs
► Sampling tus nqi ntawm 1 thib ob mus rau 12 teev
► Hloov tau 3,6 V Li-roj teeb
► Lub sijhawm sau ntawv mus txog 3 lub hlis
Specifications
| Nco | 67584 (rau RH%, Cua-Temperature thiab 2 x K-Type inputs) |
| SampLing Tus Nqi | adjustable los ntawm 1 sec. mus 12h |
| Roj teeb | 3.6V Lithium roj teeb |
| Roj teeb- Nyob | Max. 3 Lub Hlis (Measuring-Rate 5 Sec.) nyob ntawm meas. tus nqi thiab LED flash |
| Ua haujlwm kub | 20 ° C, ± 5 ° C |
| Dimensions (WxHxD) | 94 × 50 × 32 mm |
| Qhov hnyav | 91 g |
Relative Humidity (RH%)
| Ntau yam | Qhov tseeb | |
| 0… 100% | 0… 20% | ± 5.0% RH |
| 20… 40% | ± 3.5% RH | |
| 40… 60% | ± 3.0% RH | |
| 60… 80% | ± 3.5% RH | |
| 80… 100% | ± 5.0% RH | |
Cua kub (AT)
| Ntau yam | Qhov tseeb | |
| -40…70°C | -40 ... -10 ° C | ± 2 ° C |
| -10… 40 ° C | ± 1 ° C | |
| 40… 70°C | ± 2 ° C | |
| (-40…158°F) | -40… 14°F | ± 3.6 ° F |
| 14… 104° F | ± 1.8 ° F | |
| 104… 158° F | ± 3.6 ° F | |
Kub Inputs T1 / T2 (Hom-K)
| Ntau yam | Qhov tseeb | |
| -200… 1300 ° C | -200 ... -100 ° C | ± 0.5% rwg. + 2.0 ° C |
| -100… 1300 ° C | ± 0.15% rwg. + 1.0 ° C |
|
| -328… 2372°F | -328… -148°F | ± 0.5% rwg. + 3.6 ° F |
| -148… 2372°F | ± 0.15% rwg. + 1.8 ° F |
|
Vaj Huam Sib Luag
- LCD ntsuas tus nqi zaub
- Temp. / RH% khawm
- MAX / MIN khawm
- USB interface
- REC LED
- ALARM LED
- Battery compartment (rov qab)
4.1 Cov cim hauv cov zaub
- Cov zaub hloov los ntawm
, nyob ntawm lub xeev tus nqi rau 
. Lub roj teeb khoob yuav tsum tau hloov sai li sai tau - Qhia txog tus nqi siab tshaj plaws ua haujlwm
- Qhia txog tus nqi qis kawg nkaus ua haujlwm
- Lub REC icon tshwm tsuas yog thaum kaw
- Cov cim tsis zoo tshwm sim nyob rau hauv qhov ntsuas kub hauv qhov ntsuas qis qis
- Ob qhov kev qhia qis dua qhia qhov kev nyeem ntawm KType qhov ntsuas kub ntxiv
- Cov zaub puv nkaus tshwm thaum cov ntaub ntawv hauv lub cim xeeb tas lawm
- Cov zaub yuav qhia lub sij hawm thiab hnub tim uas tau khaws cia sab hauv
- Qhia txog kev ntsuas RH% av noo
- Qhia qhov qhib tau ° C lossis ° F ntsuas cua kub
- Qhia qhov qhib tau ° C lossis ° F Hom-K sensor kub
Kev teeb tsa
Txhawm rau siv cov ntaub ntawv logger, PC software yuav tsum tau teeb tsa los ntawm CD ua ntej. Pib "setup.exe" los ntawm CD thiab nruab qhov kev pab cuam mus rau ib qho nplaub tshev ntawm lub hard disk.
Txuas koj PeakTech 5180 nrog rau USB cable nrog lub Windows PC thiab Windows yuav cia li nruab tus tsav tsheb. Qhov no yuav siv ob peb feeb kom tiav.
Xwb, koj tuaj yeem nruab "CP210x" tsav tsheb los ntawm CD manually.
Nco tseg:
Lub cuab yeej tsuas yog siv tau rau hauv kev sib txuas nrog Software thiab tsis pom zoo li lwm disk.
Daim ntawv thov
6.1 Chaw ua ntej siv
Pib lub "MultiDL" Sotware nrog cov ntaub ntawv txuas nrog lub logger ntawm koj lub desktop. Yog tias kuaj pom tseeb, cov ntaub ntawv logger nrog tus lej xov tooj tshwm hauv qab "instrument":
Thaum muaj ntau yam khoom siv txuas nrog, koj tuaj yeem txheeb xyuas cov no los ntawm lawv tus lej xov tooj.
Txoj cai-nias rau ntawm lub cuab yeej icon thiab lub qhov rais uas muaj peev xwm ua tau:
- "Qhib":
Txhawm rau pib USB-kev sib txuas nrog lub cuab yeej - "Data Logger Setting":
txhais cov kev teeb tsa thiab pib kaw - "Nyeem Cov Ntaub Ntawv Logger":
rau kev soj ntsuam tom qab ntawm cov ntaub ntawv kaw
Thov ua qhov chaw nyob hauv "Data logger setting" ua ntej.
Lub Sijhawm Teeb Meem:
- "Tam sim no lub sij hawm" synchronized lub sij hawm system ntawm lub PC
- "Date Format" kev teeb tsa tuaj yeem hloov pauv hauv lub sijhawm thiab hnub hom.
Cov "sampling rate" qhia txog tus nqi rov ua dua ntawm cov ntaub ntawv logger. Koj tuaj yeem hloov qhov teeb tsa no ntawm "1 Thib Ob" (ib qhov ntsuas ib thib ob) mus txog "12 teev" (ib qho ntsuas txhua kaum ob teev) hauv vib nas this, feeb thiab teev. Nyob ntawm qhov "sampling rate” lub sijhawm sau ntawv siab tshaj plaws hloov pauv.
Nyob rau hauv "Tswb Tswb" koj tuaj yeem xaiv "lub tswb nrov" rau cov nqi siab tshaj qhov txwv tsis pub lossis "tseem ceeb" thaum nws poob qis dua qhov kev txwv pub dawb. Lub tswb ceeb toom no yog qhia los ntawm lub tswb flickering LED, uas nyob saum lub LCD-ntsuab. Hauv cov ntawv qhia zaub mov no koj tuaj yeem kho lub tswb teeb tsa rau ob qho tib si Hom-K sojntsuam ntawm nws tus kheej.
Nrog "LED Flash Cycle Setup" koj tuaj yeem teeb tsa "REC" LED teeb, uas yog teeb thaum kaw.
Hauv "Start Method" koj tuaj yeem xaiv thaum cov ntaub ntawv logger pib kaw. Yog tias koj xaiv "Tsis Siv Neeg", cov ntaub ntawv kaw tseg pib tam sim ntawd thaum koj tshem tawm USB cable, thiab yog tias "Manual" koj tuaj yeem pib sau los ntawm nias ib qho tseem ceeb ntawm cov ntaub ntawv logger.
6.2 Kev ntsuam xyuas cov ntaub ntawv logger
Txuas cov ntaub ntawv logger rau koj lub PC nrog rau USB cable thiab tso lub software.
Nyob rau hauv "Instruments" koj tuaj yeem xaiv cov ntaub ntawv logger los ntawm rightclicking thiab pib txuas lub cuab yeej nrog "Qhib".
Tom qab ntawd xaiv "Nyeem Cov Ntaub Ntawv Logger Cov Ntaub Ntawv" rau cov ntaub ntawv hloov mus rau PC:
Yog tias cov ntaub ntawv raug xa mus, cov no tau tshwm sim nyob rau hauv lub sijhawm nkhaus txiav nrog cov kab xim thiab cov ntaub ntawv sijhawm:
Nyob rau hauv "Set Scale Format" koj tuaj yeem hloov qhov tsos ntawm cov nplai manually lossis tuaj yeem xaiv qhov chaw tau txais:
Nrog "Graph Format" koj tuaj yeem hloov xim xim, kab tswb thiab X / Y-axis sawv cev:
Nyob rau hauv "Undo Zoom" thiab ob lub nyees khawm, koj tuaj yeem qhia cov chaw sib txawv rau kev nthuav dav sawv cev ntawm lub sijhawm nkhaus thiab thim rov qab cov teeb tsa no:
Xaiv lub tab "Daim Ntawv Teev Npe" thiab qhov kev nthuav qhia tabular ntawm qhov ntsuas qhov tseem ceeb yuav tshwm sim:
Hauv daim ntawv teev npe no yog ib kab hauv cov lus rau txhua qhov ntsuas ntawm txhua qhov "sample”, kom muaj kev soj ntsuam tas li ntawm qhov tseem ceeb yog ua tau. Los ntawm kev txav lub slider nyob rau hauv qab mus rau qhov kawg ntawm lub rooj, koj ua kom pom ntau qhov tseem ceeb. Yog tias qhov kev sojntsuam tsis txuas nrog, tsis muaj qhov tseem ceeb nkag rau qhov no.
Nyob rau hauv "Cov ntaub ntawv Summary" qhia tag nrho cov ntaub ntawv sau tseg, uas muab cov ntaub ntawv hais txog qhov pib thiab xaus ntawm kev kaw, qhov nruab nrab qhov tseem ceeb, tswb, yam tsawg kawg nkaus thiab siab tshaj qhov tseem ceeb.
6.3 Cov cim ua haujlwm
Nyob rau hauv lub sab sauv zaub yog pom muaj nuj nqi icons thiab menus, uas tau piav qhia hauv qab no:
| File | Qhib: Qhib cov ntaub ntawv khaws tseg yav dhau los files Kaw: Kaw cov ntaub ntawv teev tseg tam sim no Txuag: Txuag cov ntaub ntawv tam sim no li XLS thiab AsmData file Sau: Direct luam ntawv tam sim no view Luam Ua Ntejview: Ua ntejview luam Kev teeb tsa luam ntawv: Xaiv lub tshuab luam ntawv teeb tsa Tawm: Kaw qhov kev pab cuam |
| View | toolbar: Qhia qhov Toolbar Satus Bar: Muab cov xwm txheej tso saib Ntsuas: Qhia lub qhov rais ntaus ntawv |
| Ntsuas | Hloov cov ntaub ntawv kaw tseg |
| Qhov rai | Qhov rai tshiab: Qhib lwm qhov rais Cascade: Xaiv qhov raised hom kev sawv cev Pobzeb: Windows tau tso tawm kom pom hauv puv npo |
| Pab | Hais txog: Qhia Software Version Pab: Qhib Pab File |
 |
Txuag cov ntaub ntawv tam sim no li XLS thiab AsmData file |
 |
Qhib cov ntaub ntawv khaws tseg yav dhau los files |
 |
Direct luam ntawv tam sim no view |
 |
Qhib Datalogger nqis |
 |
Hloov cov ntaub ntawv kaw tseg |
 |
Qhib Kev Pab File |
Hloov roj teeb
Yog lub cim “ ” tshwm rau ntawm LCD zaub, nws qhia tias lub roj teeb yuav tsum tau hloov. Tshem cov ntsia hlau ntawm lub nraub qaum thiab qhib rooj plaub. Hloov cov roj teeb uas twb muaj lawm nrog cov roj teeb tshiab (3,6V Li-battery).
Cov roj teeb uas siv tau pov tseg kom zoo. Cov roj teeb uas siv tau yog muaj kev phom sij thiab yuav tsum tau muab rau hauv - rau qhov no yog qhov yuav tsum tau - cov thawv ntim khoom.
CEEB TOOM:
- Khaws lub ntsuas kub kom qhuav.
- Khaws cov tshuaj ntsuam xyuas kom huv.
- Khaws lub twj paj nruag thiab roj teeb kom deb ntawm tus me nyuam mos thiab me nyuam.
- Thaum lub cim ”
” tshwm, lub roj teeb qis thiab yuav tsum tau hloov tam sim ntawd. Thaum koj nruab lub roj teeb, xyuas kom meej cov polarity sib txuas yog lawm. Yog tias koj yuav tsis siv lub cuab yeej nyob rau lub sijhawm ntev, tshem lub roj teeb.
7.1 Kev Ceeb Toom Txog Kev Cai Roj Teeb
Kev xa khoom ntawm ntau yam khoom siv suav nrog roj teeb, uas rau example ua haujlwm rau kev tswj chaw taws teeb. Kuj tseem tuaj yeem muaj roj teeb lossis cov khoom ntim khoom tsim rau hauv lub cuab yeej nws tus kheej. Nyob rau hauv kev sib txuas nrog kev muag khoom ntawm cov roj teeb lossis cov khoom ntim, peb yuav tsum ua raws li Txoj Cai Roj Teeb kom ceeb toom rau peb cov neeg siv khoom hauv qab no:
Thov muab cov roj teeb qub pov tseg ntawm lub rooj sib tham los yog xa rov qab mus rau lub khw hauv zos yam tsis tau them nqi. Kev pov tseg hauv tsev tsis kam yog txwv nruj raws li Txoj Cai Roj Teeb. Koj tuaj yeem xa rov qab cov roj teeb uas siv tau los ntawm peb yam tsis tau them nqi ntawm qhov chaw nyob ntawm sab kawg hauv phau ntawv no lossis los ntawm kev tshaj tawm nrog txaus stamps.
Cov roj teeb uas muaj kab mob yuav tsum tau muab cim nrog lub cim uas muaj qhov sib txawv ntawm qhov tsis kam lees thiab cov cim tshuaj (Cd, Hg lossis Pb) ntawm cov hlau hnyav uas yog lub luag haujlwm rau kev faib tawm raws li cov pa phem:
- "Cd" txhais tau tias cadmium.
- "Hg" txhais tau tias mercury.
- "Pb" stands for lead.
Txhua txoj cai, kuj yog rau kev txhais lus, luam tawm thiab luam tawm ntawm phau ntawv no lossis cov khoom raug tshwj tseg.
Kev luam tawm txhua yam (daim duab, microfilm lossis lwm yam) tsuas yog sau ntawv tso cai los ntawm tus tshaj tawm.
Phau ntawv no yog raws li qhov tseeb technical paub. Kev hloov pauv tshwj xeeb.
Peb ntawm no paub meej tias chav tsev yog ntsuas los ntawm lub Hoobkas raws li cov kev qhia tshwj xeeb raws li cov kev qhia tshwj xeeb.
Peb pom zoo kom calibrate chav tsev dua, tom qab ib xyoos.
© PeakTech® 04/2020/XNUMX Po./Mi./JL/Ehr.
PeakTech Prüf thiab Messtechnik GmbH
Gerstenstieg 4 – DE-22926 Ahrensburg/Germany
+49 (0) 4102 97398-80 Yog
+49 (0) 4102 97398-99 Yog
info@peaktech.de ib
www.peaktech.de
Cov ntaub ntawv / Cov ntaub ntawv
 |
PeakTech 5180 Temp. thiab Humidity- Cov Ntaub Ntawv Logger [ua pdf] Phau ntawv qhia 5180 XNUMX,tw. thiab Humidity- Data Logger, Humidity- Data Logger, Temp. Cov ntaub ntawv logger, cov ntaub ntawv logger, logger |
