PCE INSTRUMENTS PCE-AQD 10 CO2 Data Logger

Specifications

• Kev ntsuas ntau
  • Kub: 10 ° C txog 90 ° C
  • Kev txheeb ze av noo: 10% ~ 90% RH
  • CO2: 0-4000 ppm
• Kev daws teeb meem
  • Kub: 0.1 ° C
  • Tus txheeb ze humidity: 1% RH
  • CO2: 1 ppm
• Qhov tseeb
  • Kub: N / A
  • Relative humidity: N / A
  • CO2: N / A

Cov lus qhia siv khoom

Cov kauj ruam siv

1. Ntxig ib daim npav SD rau hauv lub cuab yeej.
2. Fais fab rau cov ntaub ntawv logger siv lub pob xaiv.
3. Xaiv qhov xav tau cov ntaub ntawv kaw tseg (CO2, kub, av noo).
4. Muab lub cuab yeej tso rau hauv qhov chaw xav tau rau kev saib xyuas.
5. Cia cov ntaub ntawv logger sau cov ntaub ntawv nyob rau lub sijhawm xav tau.
6. Txhawm rau nkag mus rau cov ntaub ntawv kaw tseg, tshem daim npav SD thiab hloov cov ntaub ntawv mus rau PC rau kev tshuaj xyuas

Cov ntaub ntawv thaub qab ntawm SD Card rau PC
Txhawm rau thaub qab cov ntaub ntawv los ntawm SD daim npav rau PC:

1. Tshem daim npav SD los ntawm cov ntaub ntawv logger.
2. Ntxig SD daim npav rau hauv daim npav nyeem ntawv ntawm koj lub PC.
3. Nrhiav cov ntaub ntawv files ntawm daim npav SD thiab luam lawv mus rau ib daim nplaub tshev ntawm koj lub PC.

Chaw
Txhawm rau kho qhov teeb tsa ntawm PCE-AQD 10:

1. Nkag mus rau cov ntawv qhia zaub mov ntawm lub cuab yeej.
2. Hloov cov kev txwv xws li kev kaw lub sijhawm lossis lub tswb ceeb toom raws li xav tau.
3. Txuag cov kev hloov pauv ua ntej tawm hauv cov ntawv qhia zaub mov.

FAQ

Q: Dab tsi yog qhov siab tshaj plaws SD daim npav muaj peev xwm txhawb nqa los ntawm PCE-AQD 10
A: PCE-AQD 10 txhawb SD phaib txog 16 GB (SDHC).

Cov ntawv ceeb toom kev nyab xeeb

Thov nyeem phau ntawv no kom zoo thiab ua tiav ua ntej koj siv lub cuab yeej thawj zaug. Lub cuab yeej tsuas yog siv los ntawm cov neeg ua haujlwm tsim nyog thiab kho los ntawm PCE Instruments cov neeg ua haujlwm. Kev puas tsuaj lossis kev raug mob los ntawm kev tsis ua raws li phau ntawv qhia tsis suav nrog peb lub luag haujlwm thiab tsis them los ntawm peb lub warranty.

• Cov cuab yeej yuav tsum tsuas yog siv raws li tau piav qhia hauv phau ntawv qhia no. Yog tias siv lwm yam, qhov no tuaj yeem ua rau muaj xwm txheej txaus ntshai rau tus neeg siv thiab kev puas tsuaj rau lub ntsuas.
• Cov cuab yeej siv tsuas yog siv tau yog tias qhov chaw ib puag ncig (kub, txheeb ze humidity, ...) nyob rau hauv cov kev qhia tshwj xeeb. Tsis txhob tso lub cuab yeej rau qhov kub thiab txias, ncaj qha tshav ntuj, huab cua huab cua lossis noo noo.
• Tsis txhob tso lub cuab yeej ua rau muaj kev cuam tshuam los yog muaj zog vibrations.
• Cov ntaub ntawv yuav tsum tsuas yog qhib los ntawm cov neeg ua haujlwm tsim nyog PCE Instruments.
• Tsis txhob siv qhov ntsuas thaum koj ob txhais tes ntub.
• Koj yuav tsum tsis txhob ua tej yam kev hloov pauv rau lub cuab yeej.
• Cov khoom siv yuav tsum tsuas yog ntxuav nrog adamp daim ntaub. Siv cov tshuaj pH-nruab nrab nkaus xwb, tsis muaj abrasives lossis cov kuab tshuaj.
• Cov cuab yeej yuav tsum tsuas yog siv nrog cov khoom siv los ntawm PCE Instruments lossis sib npaug.
• Ua ntej siv, tshuaj xyuas rooj plaub kom pom kev puas tsuaj. Yog tias pom muaj kev puas tsuaj, tsis txhob siv lub cuab yeej.
• Tsis txhob siv cov cuab yeej hauv cov huab cua tawg.
• Qhov ntsuas qhov ntsuas raws li tau teev tseg hauv cov lus qhia tshwj xeeb yuav tsum tsis pub tshaj nyob rau txhua qhov xwm txheej.
• Kev tsis ua raws li cov ntawv ceeb toom kev nyab xeeb tuaj yeem ua rau muaj kev puas tsuaj rau lub cuab yeej thiab raug mob rau tus neeg siv.

Peb tsis lav lav rau kev luam ntawv yuam kev lossis lwm yam yuam kev hauv phau ntawv no.
Peb qhia meej rau peb cov lus lav dav dav uas tuaj yeem pom hauv peb cov ntsiab lus dav dav ntawm kev lag luam.

Taw qhia

PCE-AQD 10 yog cov ntaub ntawv logger uas sau thiab txuag cov ntsiab lus CO2, huab cua kub thiab txheeb ze av noo. Cov ntaub ntawv khaws cia rau hauv daim npav SD (txog li 16 GB SDHC). Cov cuab yeej siv tsuas yog siv rau kev sau ntawv mus sij hawm ntev hauv cov khoom noj khoom haus (cov txee txias hauv cov khw muag khoom, cov tub yees thauj khoom, cov tsev khaws khoom) nrog rau kev ntsuas thiab kaw hauv tsev ( chav sib tham, chaw ua haujlwm, thiab lwm yam)

• ntsuas kub, av noo, CO2
• saj zawg zog nyob rau hauv cov ntaub ntawv real-time cia ntawm SD nco daim card (1 … 16 GB)
• cov ntaub ntawv khaws tseg yog khaws cia ncaj qha rau SD daim npav raws li Excel file
• LCD loj

Specifications

Kev ntsuas ntau Kub txheeb ze humidity CO 2	0 ... + 50 ° C 10… 90% RH 0… 4000 ppm
Kev daws teeb meem Kub txheeb ze humidity CO 2	0.1 ° C 0.1% RH 1 ppm
Qhov tseeb Kub txheeb ze humidity CO 2	± 0.8 ° C ± 4% ntawm rdg. ± 70 ppm (<1000 ppm) ± 5% ntawm rdg. (<3000 ppm) ± 250 ppm (> 3000 ppm)
Ntsuas tus nqi	5, 10, 30, 60, 120, 300 lossis 600s lossis tsis siv neeg (yog tias tus nqi hloov pauv los ntawm ± 1 ° C, ± 1% RH, lossis ± 50 ppm, cov ntaub ntawv teev cia tau khaws cia rau hauv lub cim xeeb)
Cov ntaub ntawv nco	hloov tau ntawm SD daim npav nco 1 … 16 GB (2 GB SD daim npav suav nrog)
Zaub	LCD, 60 x 50 mm
Ambient kub	0 ... +50 °C, <90% RH
Fais fab mov	6 x 1.5 V AAA roj teeb (rau lub sijhawm thaub qab nkaus xwb) / 9 V mains adapter
Qhov ntev	132 x 80 x 32 mm
Qhov hnyav (incl. roj teeb)	285 g ib

Kev xa khoom Scope
CO2 cov ntaub ntawv logger, 2 GB SD nco daim npav, cov khoom siv phab ntsa mounting, 6 x roj teeb, mains adapter thiab cov neeg siv phau ntawv

Muaj khoom siv
ISO calibration daim ntawv pov thawj (rau kub, av noo thiab CO2)

Tswj vaj huam sib luag

1. Zaub
2. Tus yuam sij logger, sau tus yuam sij
3. key, time key
4. tus yuam sij
5. SET tus yuam sij
6. Humidity, kub sensor
7. Ncua tseg brackets
8. Rooj sawv
9. Roj teeb npog npog
10. Kev nyab xeeb ntsia hlau rau roj teeb compartment npog
11. RESET tus yuam sij
12. RS-232 tso zis
13. SD daim npav qhov
14. 9V DC kev twb kev txuas
15. CO2 sensor kev twb kev txuas
16. CO2 sensor
17. CO2 sensor plug
18. Ncua tseg mounts sensor
19. suspension mounts cov ntaub ntawv logger
20. Cov cuab yeej ncua kev kawm CO2 sensor

Kev npaj

Ntxig cov roj teeb (saib Tshooj 9)

• Ntxig cov roj teeb rau hauv lub roj teeb hauv lub roj teeb los ntawm kev ua ntej loosening cov ntsia hlau (3-10) thiab tshem lub roj teeb cover (3-9).
• Ntxig 6 x AAA roj teeb rau hauv lub thawv. Ua tib zoo mloog rau qhov tseeb polarity.
• Muab lub roj teeb npog rov qab rau thiab tuav nws nrog cov ntsia hlau.
  Lus Cim: Cov roj teeb tsuas yog siv los muab lub moos sab hauv. Rau kev khiav hauj lwm thiab tso saib, lub 'meter' yuav tsum tau siv nrog lub mains adaptor.

Cov ntaub ntawv logger

Kev npaj

• Ntxig SD daim npav (1 GB txog 16 GB) rau hauv SD daim npav qhov (3-13). Xyuas kom meej tias daim npav yog taw qhia kom raug.
• Thaum koj siv daim npav thawj zaug, nws yuav tsum tau formatted. Saib rau tshooj 8.1 yog xav paub ntxiv.
  Nco tseg: Thov tsis txhob siv daim npav SD formatted rau hauv lwm lub cuab yeej (xws li lub koob yees duab digital) Hauv qhov no, koj yuav tsum format SD daim npav dua hauv cov ntaub ntawv logger. Yog tias muaj teeb meem thaum formatting, thov sim format daim npav hauv koj lub PC. Cov txheej txheem no yuav daws tau qhov teeb meem.
• Teem sijhawm: Thaum koj siv lub ntsuas ntsuas thawj zaug, lub sijhawm yuav tsum tau teem sijhawm. Saib tshooj 8.2 yog xav paub ntxiv.
• Hom ntawv ntawm tus lej lej: Cov hom ntawv ntawm SD daim npav siv "dot" ua tus lej lej, piv txwv li "20.6" lossis "1000.53". Koj tseem tuaj yeem xaiv qhov comma ua tus lej lej, saib tshooj 8.5.
• Cov ntaub ntawv uas tuaj yeem tshwm sim ntawm cov zaub:

Qhov no qhia tias muaj teeb meem nrog daim npav SD. Nws tseem tshwm sim thaum SD daim npav nco tag nrho. Hauv qhov no, hloov daim npav nco.
Qhov no qhia tias lub roj teeb voltage qis heev. Hauv qhov no, thov hloov cov roj teeb.
Qhov no qhia tias tsis muaj daim npav nco hauv lub cuab yeej.

Cov ntaub ntawv logger muaj nuj nqi

• Nias tus yuam sij logger (3-2) rau ntau tshaj 2 vib nas this kom txog thaum cov zaub qhia "DATALOGGER". Tam sim no cov ntaub ntawv logger pib txuag cov nqi ntsuas.
• Yog tias koj xav hloov tawm cov ntaub ntawv logger muaj nuj nqi, koj yuav tsum nias tus yuam sij logger (3-2) dua rau ntau tshaj 2 vib nas this. Qhov "DATALOGGER" qhov taw qhia ces ploj ntawm cov zaub.
• nyob rau hauv tshooj 8.3, nws tau piav qhia yuav ua li cas teem caij kaw cia; nyob rau hauv tshooj 8.4, nws tau piav qhia yuav ua li cas teem lub beeper.
• Nco tseg: Ua ntej tshem daim npav SD, nco ntsoov tias cov ntaub ntawv logger muaj nuj nqi raug tso tseg. Txwv tsis pub, koj yuav poob cov ntaub ntawv los ntawm SD card.

Cov ntaub ntawv sijhawm
Yog tias koj nias thiab tuav lub sij hawm tseem ceeb (3-3) rau ntau tshaj 2 vib nas this, cov ntaub ntawv hauv qab no tshwm hauv cov zaub: xyoo / hli / hnub, teev / feeb / thib ob thiab lub sijhawm kaw.

SD daim npav cov ntaub ntawv qauv

1. Thaum koj xub ntxig daim npav rau hauv lub ntsuas, nws tsim ib daim nplaub tshev ntawm daim npav nco: HBA01
2. Thaum koj pib cov ntaub ntawv logger muaj nuj nqi thawj zaug, lub meter generates a file nyob rau hauv HBA01\ folder nrog lub npe HBA01001.xls. Cov ntaub ntawv yog ces khaws cia rau qhov no file. Thaum muaj 30,000 cov ntaub ntawv sau tseg hauv qhov no file, ib new file yog tsim. Qhov no file ces muaj lub npe HBA01002.xls.
3. Thaum 99 files tau khaws cia rau hauv HBA01 nplaub tshev, lub tshuab tsim ib lub nplaub tshev tshiab nrog lub npe: HBA02\…
4. Qhov no ua rau cov qauv hauv qab no:

• HBA 01
  • HBA01001.xls
  • HBA01002.xls
  • HBA01099.xls
• HBA 02
  • HBA02001.xls
  • HBA02002.xls
  • HBA02099.xls
  • HBAXX

Cov ntaub ntawv thaub qab ntawm SD daim npav rau PC

1. Tom qab koj tau khaws cov ntaub ntawv los ntawm lub 'meter' mus rau SD daim npav, tshem daim npav nco ntawm nws qhov chaw (3-13).
2. Ntxig SD card rau hauv tus nyeem ntawv ntawm koj lub computer.
3. Qhib lub computer thiab pib Microsoft Excel. Tam sim no koj tuaj yeem qhib lub files ntawm daim npav nco. Excel tom qab ntawd tso cai ua haujlwm ntxiv (xws li tsim cov duab) ntawm cov ntaub ntawv.

Chaw
Thaum cov ntaub ntawv logger muaj nuj nqi TSIS tau qhib rau hauv lub tester, nias lub SET key (3-5) rau ntau tshaj 2 vib nas this. Qhov no yuav coj koj mus rau cov ntawv qhia zaub mov thiab koj tuaj yeem taug kev los ntawm cov ntawv qhia zaub mov nrog txhua qhov txuas ntxiv ntawm SET yuam sij.

• Sd F. Format SD daim npav
• dAtE… Teem hnub / sijhawm (xyoo / hli / hnub / teev / feeb / thib ob)
• SP-t… Teem lub sijhawm kaw
• bEEP.. Teem lub beeper (ON los yog OFF)
• dEC… Teeb tsa tus lej zauv hom (dot lossis comma)
• t-CF… Teem lub ntsuas kub (° C lossis ° F)
• rS232… Teem lub RS-232 interface (ON lossis OFF)
• Siab… Teeb qhov siab saum hiav txwv theem hauv meters
• HighF… Teeb qhov siab saum hiav txwv theem hauv ko taw

Nco tseg: Yog tias koj tsis nias ib qho tseem ceeb rau 5 vib nas this, lub cuab yeej cia li tawm ntawm cov ntawv qhia zaub mov.

SD daim npav hom

1. Yog tias cov zaub qhia "Sd F", koj tuaj yeem siv tus yuam sij (3-3) thiab tus yuam sij (3-4) xaiv “yES” lossis “tsis yog”, qhov “yES” txhais tau tias yuav format daim npav nco thiab “tsis yog” txhais tau tias tsis format daim npav nco.
2. Yog tias koj tau xaiv "yES", koj yuav tsum paub meej qhov no nrog tus yuam sij Enter (3-2). Cov zaub ces qhia tias "yES Enter". Koj yuav tsum paub meej qhov no dua nrog tus yuam sij Enter (3- 2). Daim npav SD yog tam sim no formatted thiab tag nrho cov ntaub ntawv uas twb muaj lawm ntawm daim card yog deleted.

Teem sijhawm

1. Thaum cov zaub qhia "dAtE", koj tuaj yeem teeb tus nqi nrog tus yuam sij (3-3) thiab tus yuam sij (3-4) (pib nrog lub xyoo teem). Thaum koj tau teeb tsa tus nqi, nias tus yuam sij nkag (3-2). Tam sim no koj tuaj yeem txav mus rau tus nqi tom ntej. Cov kab ke ces yog hli, hnub, teev, feeb, thib ob.
   Nco tseg: Tus nqi yuav tsum tau teeb tsa flashes.
2. Thaum koj tau teeb tsa tag nrho cov txiaj ntsig thiab lees paub nrog tus yuam sij Enter (3-2), tag nrho cov chaw tau txais kev cawmdim. Tam sim no koj cia li nkag mus rau cov ntawv qhia zaub mov "SP-t" los teeb tsa lub sijhawm kaw.
   Nco tseg: Hnub thiab sijhawm ib txwm khiav hauv lub 'meter'. Yog li ntawd, koj tsuas yog yuav tsum tau ua qhov teeb tsa ib zaug, tshwj tsis yog koj hloov cov roj teeb.

Teem lub sijhawm kaw

1. Yog tias cov zaub qhia "SP-t", koj tuaj yeem teeb tus nqi nrog tus yuam sij (3-3) thiab tus yuam sij (3-4). Cov kab ke yog: 5 vib nas this, 10 vib nas this, 30 vib nas this, 60 vib nas this, 120 vib nas this, 300 vib nas this, 600 vib nas this thiab Auto.
2. Tom qab koj tau xaiv lub sijhawm xav tau, paub meej qhov no nrog tus yuam sij Enter (3-2).
   Nco tseg: "Auto" txhais tau hais tias cov ntaub ntawv khaws tseg ib txwm khaws cia yog tias qhov kub thiab av noo hloov los ntawm ± 1 ° C lossis ± 1% RH.

Teem lub beeper

1. Thaum cov zaub qhia "bEEP", koj tuaj yeem siv tus yuam sij (3-3) thiab tus yuam sij(3- 4) xaiv "yES" lossis "tsis muaj", qhov twg "yES" txhais tau hais tias lub beeper yog ON thiab txhua zaus khaws tus nqi, lub suab nrov nrov; "tsis yog" txhais tau hais tias lub beeper yog OFF.
2. Koj tuaj yeem paub meej thiab txuag koj qhov chaw nrog tus yuam sij Enter (3-2).

Teem lub decimal point
Tus lej lej tuaj yeem raug formatted li "dot" lossis "comma". Txij li thaum nyob rau hauv lub tebchaws United States tus zauv point yog ib tug "dot" (xws li 523.25) thiab nyob rau hauv cov teb chaws Europe cov zauv point feem ntau yog ib tug "comma" (piv txwv li 523,25), cov ntawv luv nyob rau hauv cov zaub yog "USA" rau "dot" thiab " EURO” rau “comma”.

1. Yog tias cov zaub qhia "dEC", koj tuaj yeem xaiv "USA" lossis "EURO" nrog tus yuam sij(3-3) thiab tus yuam sij (3-4).
2. Koj tuaj yeem paub meej thiab txuag koj qhov chaw nrog tus yuam sij Enter (3-2).

Teem lub ntsuas kub

1. Yog tias cov zaub qhia "t-CF", koj tuaj yeem siv tus yuam sij (3-3) thiab qhov tseem ceeb (3-4) xaiv "C" lossis "F", qhov "C" sawv cev rau degrees Celsius thiab "F" rau degrees Fahrenheit.
2. Koj tuaj yeem paub meej thiab txuag koj qhov chaw nrog tus yuam sij Enter (3-2).

Teem lub RS-232 interface

1. Yog tias cov zaub qhia "rS232", koj tuaj yeem siv key (3-3) thiab tus yuam sij (3-4) xaiv "yES" lossis "tsis muaj", qhov "yES" txhais tau hais tias RS-232 interface (3-12) tau qhib thiab "tsis yog" txhais tau hais tias lub interface (3-12) yog deactivated.
2. Koj tuaj yeem paub meej thiab txuag koj qhov chaw nrog tus yuam sij Enter (3-2).

Teeb tsa qhov siab hauv meters (hiav txwv)
Txhawm rau ntsuas qhov tseeb CO2, nws raug nquahu kom nkag mus rau qhov chaw siab, tseem hu ua "altitude saum toj no hiav txwv theem".

1.  Thaum cov zaub qhia "High", koj tuaj yeem hloov tus nqi nrog tus yuam sij (3-3) thiab tus yuam sij (3-4).
2. Koj tuaj yeem paub meej thiab txuag koj qhov chaw nrog tus yuam sij Enter (3-2).

Teeb tsa qhov siab hauv ko taw (hiav txwv)
Txhawm rau ntsuas qhov tseeb CO2, nws raug nquahu kom nkag mus rau qhov chaw siab, tseem hu ua "altitude saum toj no hiav txwv theem".

1. Thaum cov zaub qhia "HighF", koj tuaj yeem hloov tus nqi nrog tus yuam sij (3-3) thiab tus yuam sij (3-4).
2. Koj tuaj yeem paub meej thiab txuag koj qhov chaw nrog tus yuam sij Enter (3-2).

Fais fab mov
Cov cuab yeej ntsuas yuav tsum tau ua haujlwm nrog 9 V DC plug-in mains adaptor. Kev sib txuas rau cov khoom siv hluav taws xob sab nraud yog nyob rau hauv qab ntawm qhov ntsuas (3-14). Cov roj teeb tsuas yog ua haujlwm rau lub hom phiaj ntawm kev tuav lub moos sab hauv thiab tus kheej qhov chaw.

Hloov roj teeb
Thaum lub roj teeb lub cim tshwm nyob rau hauv kaum sab xis ntawm cov zaub, cov roj teeb yuav tsum tau hloov (saib tshooj 14 pov tseg).

1. Loos lub hau ntswj (3-10) ntawm lub roj teeb lub hau npog (3-9) tom qab ntawm chav tsev.
2. Tshem cov roj teeb thiab ntxig 6 lub roj teeb AAA tshiab. Xyuas kom tseeb tias qhov polarity yog qhov tseeb thaum ntxig cov roj teeb.
3. Hloov lub roj teeb npog (3-9) thiab ruaj ntseg nrog cov ntsia hlau (3-10).

Rov pib dua qhov system
Yog tias koj muaj teeb meem khiav lub tshuab, piv txwv liample, yog hais tias lub tshuab nres teb rau ib tug keystroke, koj muaj peev xwm rov pib dua lub tshuab mus rau nws thawj lub xeev. Qhov no yog ua raws li nram no:
Thaum lub tshuab qhib, nias lub RESET tus yuam sij (3-11) maj mam nrog ib qho khoom taw qhia. Lub tshuab tam sim no rov pib dua rau nws qhov qub.

RS-232 PC interface
Cov cuab yeej muaj RS-232 interface. Cov ntaub ntawv raug xa los ntawm 3.5 hli jack ntsaws qhov (3-12) thaum cov ntaub ntawv sib cuam tshuam tau teem rau "ON". Saib tshooj 8.7 thiab.
Cov ntaub ntawv yog 16-tus lej cov ntaub ntawv ntws.
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 DXNUMX

D0	Xaus lo lus
D1 & D8	Display, D1 = LSD, D8 = MSD Example: Yog tias cov zaub qhia 1234, D8 yog D1: 00001234
D9	Decimal point (DP), txoj hauj lwm ntawm sab xis mus rau sab laug 0 = tsis muaj DP, 1 = 1 DP, 2 = 2 DP, 3 = 3 DP
D10	Polarity 0 = Positive, 1 = Negative
D11 & D12	Lub ntsiab qhia nyob rau hauv cov zaub ° C = 01, ° F = 02, % RH = 04, ppm = 19
D13	Kev xaiv cov duab 1 = sab saum toj zaub 2 = nruab nrab zaub 3 = qis zaub
D14	4
D15	Pib lo lus

RS232 hom, 9600, N 8, 1

Baud tus nqi	9600
Parity	Tsis muaj
Pib me ntsis	8
Txhob me ntsis	1

Hu rau

Yog tias koj muaj lus nug, lus qhia lossis teeb meem kev ua haujlwm, thov tsis txhob yig tiv tauj peb. Koj yuav pom cov ntaub ntawv tiv tauj uas cuam tshuam thaum kawg ntawm phau ntawv siv no.

Kev pov tseg

• Rau kev pov tseg cov roj teeb hauv EU, 2006/66/EC cov lus qhia ntawm European Parliament siv. Vim muaj cov pa phem, cov roj teeb yuav tsum tsis txhob muab pov tseg raws li cov khoom pov tseg hauv tsev. Lawv yuav tsum tau muab rau cov ntsiab lus sau uas tsim los rau lub hom phiaj ntawd.
• Txhawm rau ua raws li EU cov lus qhia 2012/19/EU peb muab peb cov khoom siv rov qab. Peb rov siv dua los yog muab lawv rau lub tuam txhab rov ua dua tshiab uas muab cov khoom siv pov tseg raws li txoj cai.
• Rau cov teb chaws sab nraud EU, cov roj teeb thiab cov khoom siv yuav tsum muab pov tseg raws li koj cov kev cai pov tseg hauv zos.
• Yog tias koj muaj lus nug, thov hu rau PCE Instruments.

PCE Instruments cov ntaub ntawv tiv tauj

Lub teb chaws Yelemees
PCE Deutschland GmbH
Kuv Langel 26
D-59872 Meschede

Deutschland
Tel.: +49 (0) 2903 976 99 0
Fax: +49 (0) 2903 976 99 info@pce-instruments.com ib
www.pce-instruments.com/deutsch

Cov ntaub ntawv / Cov ntaub ntawv

PCE INSTRUMENTS PCE-AQD 10 CO2 Data Logger [ua pdf] Tus neeg siv phau ntawv PCE-AQD 10 CO2 Cov Ntaub Ntawv Logger, PCE-AQD 10, CO2 Cov Ntaub Ntawv Logger, Cov Ntaub Ntawv Logger, Logger

Cov ntaub ntawv

• Cov neeg siv phau ntawv