NCEES NCD Network Control zaub

General

Lub Network Control Display (NCD) yog cov tiam tom ntej ntawm kev tswj xyuas kev tshaj tawm rau NOTI•FIRE•NET™ network. Nrog rau kev tsim qauv tshiab niaj hnub no, NCD ua tau raws li cov kev xav tau ntawm kev tsim kom zoo nkauj niaj hnub no. Lub intuitive 1024 x 600 10 "xim kov npo muab cov xim coded cov ntaub ntawv ntawm cov ncauj lus kom ntxaws txheej xwm txheej xwm thiab cov ntaub ntawv taw qhia. Nws yog sib xws nrog ONYX Series nodes xws li NFS2-3030, NFS-320, thiab NFS2-640 hluav taws tswb con-trol panels, nrog rau NCA-2. NCD muab kev tswj hwm kev tswj hwm thiab tso saib muaj peev xwm rau txhua tus, lossis rau cov kev xaiv network.
Tsis tas li ntawd nyob rau hauv ib qho kev teeb tsa ib leeg, NCD tuaj yeem siv los ua cov khoom tseem ceeb rau kev tswj hwm thiab cov xwm txheej muaj peev xwm ntawm cov duab tsis tshua muaj los ntawm kev siv Direct Connect.
Thaum txuas nrog ib lossis ntau lub networked panels, NCD pro-vides network tswj thiab xwm txheej / keeb kwm muaj peev xwm.

Nta

Kho vajtse nta

• Kev saib xyuas tag nrho ntawm txhua qhov kev nkag thiab kev sib raug zoo network.
• High definition 10 "1024 x 600 xim touchscreen zaub.
• LED xwm txheej ntsuas
• Yuav tsum tau 24 VDC, thiab kev sib txuas hauv network lossis txuas ncaj qha.
• Peb USB 2.0 txuas, USB C, USB Micro, thiab USB A.
• Teeb meem Relay.
• Tamper thiab teeb meem inputs.

Muaj nuj nqi

• Cov ntaub ntawv ntaus ntawv, suav nrog qhov chaw nyob thiab cov lus piav qhia, tuaj yeem txheeb xyuas sai.
• Network-wide: lees paub, ntsiag to, rov pib dua.
• Lamp Kuaj.
• Interactive Summary Event Count zaub thiab kev tshwm sim.
• Intuitive neeg siv kev taw qhia kev pab cuam.
• Tag nrho programmable node-mapping subsystem.
• Environmental adjustment controls kom maximize zaub legibility.
• Xim coded Icon raws li kev ceeb toom tshwm sim.
• Yuav siv tau ua FACP thawj zaub.
• Txhawb cov txheej txheem thiab kev kub ceev network systems.
• Event vectoring kom ceev viewkev koom tes ntawm pawg xwm txheej.
• Virtual alphanumeric QWERTY keypad thiab tus lej keypad dis-plays thaum xav tau cov ntaub ntawv nkag.
• Ib tus neeg Pab / Disable lossis pab pawg Pab / Disable rau networked ONYX series panels.
• Tswj ON / OFF rau networked ONYX series vaj huam sib luag tswj cov ntsiab lus.
• Nyeem Status networked ONYX series vaj huam sib luag cov ntsiab lus thiab thaj chaw.
• Keeb Kwm Tsis Muaj (10,000 txheej xwm, 3000 tso tawm).
• Txog 50 tus neeg siv tshwj xeeb thiab 5 cov neeg siv sib txawv.
• Nyeem xwm txheej los ntawm kev tshwm sim zaub.
• Keeb kwm lim rau kev tshaj tawm qhia.
• Timer tswj rau Auto Silence, AC Fail Delay.
• Kev cai wallpaper

NCD Indicators and Controls

LED qhia
Ntsuab LED illuminates thaum 24 VDC fais fab tuag; Thaum lub roj teeb thaub qab, lub teeb ntsuab LED yuav tsis teeb.
Yellow LED illuminates thaum muaj xwm txheej tsis zoo.

VIRTUAL EVENT IndicatorS

• FIRE ALARM (liab) illuminates thaum muaj tsawg kawg yog ib lub tswb ceeb toom tshwm sim.
• CO Tswb (xiav) illuminates thaum tsawg kawg yog CO tswb tshwm sim.
• SUPERVISORY (daj) illuminates thaum muaj tsawg kawg yog ib qho kev saib xyuas-sory tshwm sim (piv txwv li, lub tshuab nqus dej tawm ib txwm muaj, tsis tshua muaj siab, hluav taws kub twj tso kua mis khiav, tus neeg saib xyuas ncig xyuas, thiab lwm yam).
• TEEB MEEM (daj) illuminates thaum tsawg kawg ib qho teeb meem tshwm sim.
• POINT DISABLED (daj) illuminates thaum tsawg kawg yog ib qho lov tes taw muaj nyob rau hauv lub network los yog nyob rau hauv lub system.
• Lwm yam (ntau sib txawv) teeb pom kev ruaj ntseg, PRE-ALARM, CO PRE-ALARM, thiab CRITICAL PROCESS.
• SIGNALS SILENCED (daj) illuminates yog NCD Silence touch point tau raug nias lossis yog tias muaj lwm qhov ntawm xa mus rau Network Silence hais kom ua.

FUNCTION TOUCHPOINTS

• Ntawv qhia zaub mov
• Nkag mus
• lees paub
• Teeb liab Silence
• Lawv Rov Pib Dua

Ack (Kev lees paub) Coj mus rhaub qhov touchpoint no kom lees paub tawm tag nrho cov xwm txheej nquag.
Silence (Signal Silence) Coj mus rhaub qhov touchpoint no kom tua tag nrho cov tswj modules, ceeb toom cov khoom siv hluav taws xob, thiab vaj huam sib luag tso zis circuits uas tau programmed li Silenceable.
Pib dua (System Reset) Coj mus rhaub qhov touchpoint no kom tshem tawm tag nrho cov latched tswb thiab lwm yam xwm txheej thiab qhia meej qhov tshwm sim.

MENU FUNCTION TOUCHPOINTS
Ntawv qhia zaub mov muaj nuj nqi touchpoint yog siv tau txawm tias cov ntawv qhia zaub mov dialogs.

• HAIS TXOG – coj mus rhaub qhov touchpoint rau view tam sim no firmware thiab hardware kho tus lej.
• DISPLAY - coj mus rhaub qhov touchpoint no los kho cov teeb tsa zaub.
• LAMP TEST – coj mus rhaub qhov touchpoint no los kuaj cov pixels, LED indi-cators thiab piezo.

Specifications

Kub thiab humidity ranges: Qhov system no ua tau raws li NFPA cov cai rau kev ua haujlwm ntawm 0 ° C txog 49 ° C (32 ° F txog 120 ° F); thiab ntawm qhov txheeb ze av noo (tsis-condensing) ntawm 85% ntawm 30 ° C (86 ° F) ib NFPA. Txawm li cas los xij, lub neej muaj txiaj ntsig ntawm cov roj teeb hauv lub cev thiab cov khoom siv hluav taws xob yuav raug cuam tshuam los ntawm qhov kub thiab txias. Yog li ntawd, nws yog recommended tias qhov system no thiab tag nrho cov peripherals yuav tsum tau ntsia rau hauv ib tug envi-ronment nrog ib tug nominal chav tsev kub ntawm 15 ° C mus rau 27 ° C (60 ° F mus rau 80 ° F). Cov khoom hnyav yog 3 lbs (1.36 kg).

ELECTRICAL REQUIREMENTS
NCD tuaj yeem siv tau los ntawm ib qho UL Listed non-resettable 24 VDC qhov chaw los ntawm NOTIFIER tshaj hluav taws xob vaj huam sib luag (saib cov ntaub ntawv vaj huam sib luag). Lub zog muaj zog: 1) AMPS-24 (120 VAC, 50/60 Hz) los yog AMPS-24E (240 VAC, 50/60 Hz) fais fab mov; 2) NFS2-640 thiab NFS-320 on-board fais fab mov; los yog 3) ib tug saib xyuas +24 VDC fais fab mov uas yog UL- npe rau kev pab tiv thaiv hluav taws. Kev siv tam sim no ntawm NCD yog 360 mA.

Product Line Information

NCD: Network Control zaub. Yuav tsum muaj kev sib txuas lus network-tions module rau kev sib txuas lus. Hauv kev sib txuas ncaj qha, NCM tsis tas yuav tsum tau.
NCM-W, NCM-F: Standard Network Communications Modules. Hlau thiab ntau hom fiber ntau versions muaj. Saib DN-6861.
HS-NCM-W/MF/SF/WMF/WSF/MFSF: High-speed network kev sib txuas lus modules. Hlau, ib hom fiber ntau, ntau hom fiber ntau, thiab cov qauv hloov pauv hloov pauv muaj. Saib DN-60454.
ABS-TD: Kaum nti zaub annunciator Backbox, Nto, dub. Mounts NCD thiab ib lub network tswj module.
CAB-4 Series Enclosure: Muaj nyob rau hauv plaub qhov ntau thiab tsawg, "AA" txog "D". Backbox thiab qhov rooj txiav txim cais; yuav tsum tau BP2-4 roj teeb phaj. Saib DN-6857.
DP-GDIS 2: Graphic Annunciator Dress Plate. Hnav phaj yog siv thaum lub 10 "graphic display yog mounted nyob rau hauv CAB-4 Series txee, tsuas yog sab saum toj kab.
DP-GDIS 1: Graphic Annunciator Dress Plate. Hnav khaub ncaws yog siv thaum lub 10 "graphic display yog mounted nyob rau sab saum toj kab ntawm CAB-4 Series txee.

Cov Ntawv Pov Thawj thiab Kev Pom Zoo
Cov npe thiab kev pom zoo no siv rau NCD. Qee qhov xwm txheej, qee cov qauv lossis cov ntawv thov yuav tsis raug teev los ntawm qee lub koom haum pom zoo, lossis cov npe yuav raug ua tiav. Nrog rau lub Hoobkas kom paub txog cov xwm txheej tshiab.
UL teev npe: S635.
CSFM: 7300-0028: 0507.
FM pom zoo.

CEEB TOOM
12 Clintonville Road, Northford, CT 06472 203.484.7161 www.notifier.com

Cov ntaub ntawv no tsis yog tsim los siv rau lub hom phiaj installation. Peb sim ua kom peb cov ntaub ntawv cov khoom tshiab thiab raug.
Peb tsis tuaj yeem npog tag nrho cov ntawv thov tshwj xeeb lossis cia siab tias yuav tsum tau ua txhua yam. Txhua qhov kev qhia tshwj xeeb tuaj yeem hloov pauv yam tsis tau ceeb toom.

NOTI•FIRE•NET ™ yog lub cim lag luam ntawm, thiab NOTIFIER® thiab ONYX® yog cov npe lag luam ntawm Honeywell Interna-tional Inc.
©2019 los ntawm Honeywell International Inc. All rights reserved. Txwv tsis pub siv cov ntaub ntawv no nruj me ntsis.
Lub Tebchaws Keeb Kwm: Tebchaws USA

firealarmresources.com

Cov ntaub ntawv / Cov ntaub ntawv

NCEES NCD Network Control zaub [ua pdf] Tus tswv phau ntawv NCD Network Control zaub, NCD, Network Control zaub, Tswj zaub

Cov ntaub ntawv

• Cov neeg siv phau ntawv