netgate 6100 MAX Router ruaj ntseg
Specifications
- Khoom npe: Netgate 6100 MAX Router Router
- Networking Ports: WAN1, WAN2, WAN3, WAN4, LAN1, LAN2, LAN3, LAN4
- Chaw nres nkoj hom: RJ-45, SFP, TwoDotFiveGigabitEthernet
- Chaw nres nkoj ceev: 1 Gbps, 1/10 Gbps, 2.5 Gbps
- Lwm cov chaw nres nkoj: 2x USB 3.0 Ports
Phau Ntawv Qhia Pib Ceev no suav nrog thawj zaug cov txheej txheem kev sib txuas rau Netgate 6100 MAX Router Router ruaj ntseg thiab tseem muab cov ntaub ntawv xav tau kom nyob twj ywm thiab khiav.
THOV KOM TAU
Siv cov kauj ruam hauv qab no los teeb tsa TNSR Router Router.
- Txhawm rau teeb tsa Network Interfaces thiab nkag mus rau Is Taws Nem, ua raws li cov lus qhia hauv Zero-to-Ping cov ntaub ntawv.
Nco tseg: Tsis yog txhua kauj ruam hauv Zero-to-Ping cov ntaub ntawv yuav tsim nyog rau txhua qhov teeb meem teeb tsa. - Thaum Host OS muaj peev xwm ncav cuag Is Taws Nem, tshawb xyuas qhov hloov tshiab (Hloov kho TNSR) ua ntej pib. Qhov no ua kom muaj kev ruaj ntseg thiab kev ncaj ncees ntawm lub router ua ntej TNSR interfaces raug rau hauv Internet.
- Thaum kawg, teeb tsa TNSR piv txwv kom ua tau raws li cov ntaub ntawv siv tshwj xeeb. Cov ntsiab lus tau teev nyob rau sab laug ntawm TNSR Documentation site. Kuj tseem muaj TNSR Configuration Example Recipes uas tej zaum yuav muaj kev pab thaum configure TNSR.
QHOV CHAW UA HAUJ LWM THIAB PORTS
Cov ntawv sau tus lej hauv daim duab no xa mus rau kev nkag hauv Networking Ports thiab Lwm Cov Chaw nres nkoj.
Networking Ports
WAN1 thiab WAN2 Combo-Ports yog cov chaw nres nkoj sib koom. Txhua tus muaj RJ-45 chaw nres nkoj thiab SFP chaw nres nkoj. Tsuas yog RJ-45 lossis SFP connector tuaj yeem siv txhua qhov chaw nres nkoj.
Nco tseg: Txhua qhov chaw nres nkoj, WAN1 thiab WAN2, yog sib cais thiab tus kheej. Nws tuaj yeem siv RJ-45 txuas ntawm ib qho chaw nres nkoj thiab SFP txuas ntawm lwm qhov.
Table 1: Netgate 6100 Network Interface Layout
| Chaw nres nkoj | Daim ntawv lo | Linux Label | TSO Label | Chaw nres nkoj yam | Chaw nres nkoj ceev |
| 2 | WAN1 | np2s0f 1 | GigabitEthernet 2/0/1 | RJ-45/SFP | 1gbps ua |
| 3 | WAN2 | np2s0f 0 | GigabitEthernet 2/0/0 | RJ-45/SFP | 1gbps ua |
| 4 | WAN3 | np3s0f 0 | TenGigabitEthernet3/0/0 | SFP | 1/10 Gbps |
| 4 | WAN4 | np3s0f 1 | TenGigabitEthernet3/0/1 | SFP | 1/10 Gbps |
| 5 | LAN 1 | np4s 0 | ObDotFiveGigabitEthernet4/0/0 | RJ-45 | 2.5gbps ua |
| 5 | LAN 2 | np5s 0 | ObDotFiveGigabitEthernet5/0/0 | RJ-45 | 2.5gbps ua |
| 5 | LAN 3 | np6s 0 | ObDotFiveGigabitEthernet6/0/0 | RJ-45 | 2.5gbps ua |
| 5 | LAN 4 | np7s 0 | ObDotFiveGigabitEthernet7/0/0 | RJ-45 | 2.5gbps ua |
Nco tseg: Lub neej ntawd Host OS Interface yog enp2s0f0. Lub party OS Interface yog ib lub network interface uas tsuas yog muaj rau tus tswv OS thiab tsis muaj nyob rau hauv TNSR. Txawm hais tias kev xaiv xaiv tau, qhov kev coj ua zoo tshaj plaws yog kom muaj kev nkag mus thiab hloov kho tus tswv OS.
SFP + Ethernet Ports
WAN3 thiab WAN4 yog cov chaw nres nkoj sib cais, txhua qhov muaj siab 10 Gbps rov qab mus rau Intel SoC.
Ceeb toom: Lub built-in SFP interfaces ntawm C3000 systems tsis txhawb modules siv tooj liab Ethernet con-nectors (RJ45). Yog li ntawd, tooj liab SFP / SFP + modules tsis tau txais kev txhawb nqa ntawm lub platform no.
Nco tseg: Intel sau cov kev txwv ntxiv hauv qab no ntawm cov interfaces no:
Cov khoom siv raws li Intel(R) Ethernet Connection X552 thiab Intel(R) Ethernet Connection X553 tsis txhawb cov yam ntxwv hauv qab no:
- Zog txuag hluav taws xob Ethernet (EEE)
- Intel PROSet rau Windows Device Manager
- Intel ANS pab pawg lossis VLANs (LBFO tau txais kev txhawb nqa)
- Fiber Channel hla Ethernet (FCoE)
- Data Center Bridging (DCB)
- IPSec Offloading
- MACSec Offloading
Tsis tas li ntawd, SFP + cov khoom siv raws li Intel(R) Ethernet Connection X552 thiab Intel(R) Ethernet Connection X553 tsis txhawb cov yam ntxwv hauv qab no:
- Ceev thiab duplex auto-negotiation.
- Wake ntawm LAN
- 1000BASE-T SFP Modules
Lwm Ports
| Chaw nres nkoj | Kev piav qhia |
| 1 | Serial Console |
| 6 | Hwj chim |
Cov neeg siv khoom tuaj yeem nkag mus rau Serial Console siv ob qho tib si ua hauv serial interface nrog Micro-USB B cable lossis RJ45 "Cisco" style cable thiab cais serial adapter.
Nco tseg: Tsuas yog ib hom kev sib txuas ntawm console yuav ua haujlwm ib zaug thiab RJ45 console kev twb kev txuas muaj qhov tseem ceeb. Yog tias ob qhov chaw nres nkoj txuas nrog tsuas yog RJ45 console chaw nres nkoj yuav ua haujlwm.
- Lub hwj chim connector yog 12VDC nrog threaded locking connector. Kev siv hluav taws xob 20W (tsis muaj zog)
Pem hauv ntej
LED Qauv
| Kev piav qhia | LED Qauv |
| Standby | Lub voj voog khoom txiv kab ntxwv |
| Hwj chim On | Lub voj voog khoom xiav |
Sab laug
Lub vaj huam sib luag sab laug ntawm lub cuab yeej (thaum tig mus rau pem hauv ntej) muaj:
| # | Kev piav qhia | Lub hom phiaj |
| 1 | Pib dua khawm (Recessed) | Tsis muaj haujlwm ntawm TNSR lub sijhawm no |
| 2 | Lub zog khawm (Protruding) | Xovxwm luv (Tuav 3-5s) Kev kaw zoo, Fais fab rau |
| Ntev Xovxwm (Tuav 7-12s) Hard zog txiav rau CPU | ||
| 3 | 2 x USB 3.0 Ports | Txuas USB Devices |
Txuas rau USB CONSOLE
Phau ntawv qhia no qhia tau hais tias yuav ua li cas nkag mus rau lub serial console uas tuaj yeem siv rau kev daws teeb meem thiab kev kuaj mob ua haujlwm nrog rau qee qhov kev teeb tsa yooj yim.
Muaj qee zaus thaum nkag mus rau lub console ncaj qha. Tej zaum GUI lossis SSH nkag tau raug kaw, lossis tus password tau ploj lossis tsis nco qab lawm.
USB Serial Console Device
Cov cuab yeej no siv Silicon Labs CP210x USB-to-UART Choj uas muab kev nkag mus rau lub console. Cov cuab yeej no raug nthuav tawm ntawm USB Micro-B (5-pin) chaw nres nkoj ntawm lub cuab yeej.
Nruab tus Tsav Tsheb
Yog xav tau, nruab ib qho tsim nyog Silicon Labs CP210x USB rau UART Choj tsav tsheb ntawm qhov chaw ua haujlwm siv los txuas nrog lub cuab yeej.
- Qhov rai
Muaj cov tsav tsheb muaj rau Windows muaj rau rub tawm. - macOS
Muaj cov tsav tsheb muaj rau macOS muaj rau rub tawm.
Rau macOS, xaiv CP210x VCP Mac rub tawm. - Linux
Muaj cov tsav tsheb muaj rau Linux muaj rau rub tawm. - FreeBSD
Tsis ntev los no versions ntawm FreeBSD suav nrog tus tsav tsheb no thiab yuav tsis xav tau kev teeb tsa phau ntawv.
Txuas ib USB Cable
Tom ntej no, txuas mus rau lub console chaw nres nkoj siv lub cable uas muaj USB Micro-B (5-pin) txuas rau ntawm ib kawg thiab USB Hom A ntsaws ntawm lwm kawg.
Maj mam thawb lub USB Micro-B (5-pin) plug kawg rau hauv lub console chaw nres nkoj ntawm cov khoom siv thiab txuas USB Hom A ntsaws rau hauv ib qho chaw nres nkoj USB ntawm qhov chaw ua haujlwm.
Tswv yim: Nco ntsoov maj mam thawb hauv USB Micro-B (5-pin) txuas ntawm lub cuab yeej sab tag. Nrog rau cov cables feem ntau yuav muaj qhov "nias", "snap", lossis cov cim zoo sib xws thaum lub cable tau koom nrog.
Siv lub zog rau lub cuab yeej
Ntawm qee qhov kho vajtse, USB serial console chaw nres nkoj yuav tsis raug kuaj pom los ntawm tus neeg siv khoom ua haujlwm kom txog thaum lub cuab yeej ntsaws rau hauv lub zog.
Yog hais tias tus neeg siv OS tsis ntes USB serial console chaw nres nkoj, txuas lub hwj chim qaum rau lub cuab yeej kom nws pib booting.
Yog tias USB serial console chaw nres nkoj tshwm tsis muaj lub zog siv rau lub cuab yeej, ces qhov kev coj ua zoo tshaj plaws yog tos kom txog thaum lub davhlau ya nyob twg qhib thiab txuas nrog lub serial console ua ntej lub hwj chim ntawm lub cuab yeej. Ua li no tus neeg siv tau view tag nrho cov khau raj tso zis.
Nrhiav lub Console Port Device
Qhov tsim nyog console chaw nres nkoj ntaus ntawv uas lub chaw ua haujlwm tau muab los ua qhov chaw nres nkoj serial yuav tsum nyob ua ntej sim txuas mus rau lub console.
Nco tseg: Txawm hais tias qhov chaw nres nkoj serial tau muab tso rau hauv BIOS, lub chaw ua haujlwm OS tuaj yeem rov ua nws mus rau lwm qhov chaw nres nkoj COM.
Qhov rai
Txhawm rau nrhiav lub npe ntaus ntawv ntawm Windows, qhib Device Manager thiab nthuav cov ntu rau Ports (COM & LPT). Saib rau kev nkag nrog lub npe xws li Silicon Labs CP210x USB rau UART Choj. Yog tias muaj ib daim ntawv lo hauv lub npe uas muaj "COMX" qhov twg X yog tus lej lej (xws li COM3), tus nqi ntawd yog qhov yuav siv los ua qhov chaw nres nkoj hauv qhov kev pab cuam davhlau ya nyob twg.
macOS
Cov cuab yeej cuam tshuam nrog lub system console zoo li yuav tshwm sim li, lossis pib nrog, /dev/cu.usbserial- .
Khiav ls -l /dev/cu.* los ntawm Terminal kom pom cov npe ntawm cov khoom siv USB muaj thiab nrhiav qhov tsim nyog rau cov khoom siv. Yog tias muaj ntau yam khoom siv, cov cuab yeej raug yog yuav yog ib lub sijhawm tsis ntev los noamp los yog siab tshaj ID.
Linux
Cov cuab yeej cuam tshuam nrog lub system console zoo li yuav tshwm sim li /dev/ttyUSB0. Nrhiav cov lus hais txog lub cuab yeej txuas rau hauv lub kaw lus kaw lus files los yog khiav dmesg.
Nco tseg: Yog tias lub cuab yeej tsis tshwm sim hauv / dev /, saib cov ntawv sau saum toj no hauv ntu tsav tsheb hais txog kev thauj khoom ntawm Linux tsav tsheb thiab rov sim dua.
FreeBSD
Cov cuab yeej cuam tshuam nrog lub system console zoo li yuav tshwm sim li /dev/cuaU0. Nrhiav cov lus hais txog lub cuab yeej txuas rau hauv lub kaw lus kaw lus files los yog khiav dmesg.
Nco tseg: Yog hais tias lub serial ntaus ntawv tsis nyob, xyuas kom meej tias lub cuab yeej muaj hwj chim thiab ces rov xyuas dua.
Tua tawm Terminal Program
Siv lub davhlau ya nyob twg program los txuas rau qhov system console chaw nres nkoj. Qee qhov kev xaiv ntawm cov khoos kas terminal:
Qhov rai
Rau Windows qhov kev coj ua zoo tshaj plaws yog khiav PuTTY hauv Windows lossis SecureCRT. Ib example ntawm yuav ua li cas rau configure PuTTY yog hauv qab no.
Ceeb toom: Tsis txhob siv Hyperterminal.
macOS
Rau macOS qhov kev xyaum zoo tshaj plaws yog khiav GNU screen, lossis cu. Ib example ntawm yuav ua li cas rau configure GNU screen yog hauv qab no. Linux
Rau Linux qhov kev coj ua zoo tshaj plaws yog khiav GNU screen, PuTTY hauv Linux, minicom, lossis dterm. Examples ntawm kev teeb tsa PuTTY thiab GNU screen li cas hauv qab no.
FreeBSD
Rau FreeBSD qhov kev xyaum zoo tshaj plaws yog khiav GNU screen lossis cu. Ib example ntawm yuav ua li cas rau configure GNU screen yog hauv qab no.
Client-Specific Examples
PuTTY hauv Windows
- Qhib PuTTY thiab xaiv Session hauv Qeb ntawm sab laug tes.
- Teem hom kev sib txuas rau Serial
- Teem Serial kab rau qhov chaw nres nkoj console tau txiav txim siab yav dhau los
- Teem lub Ceev rau 115200 ntsis ib ob.
- Nyem qhov Qhib khawm
PuTTY mam li tso saib lub console.
PuTTY hauv Linux
Qhib PuTTY los ntawm lub davhlau ya nyob twg los ntawm kev ntaus sudo putty
Nco tseg: Cov lus txib sudo yuav ceeb toom rau lub chaw ua haujlwm hauv zos password ntawm tus account tam sim no.
- Teem hom kev sib txuas rau Serial
- Teem Serial kab rau /dev/ttyUSB0
- Teem lub Ceev rau 115200 ntsis ib ob
- Nyem qhov Qhib khawm
PuTTY mam li tso saib lub console.
GNU npo
Feem ntau qhov screen yuav raug hu ua yooj yim los ntawm kev siv cov kab hais kom raug, qhov twg yog qhov chaw nres nkoj console uas nyob saum toj no.
$ sudo npo 115200 XNUMX Nws
Nco tseg: Cov lus txib sudo yuav ceeb toom rau lub chaw ua haujlwm hauv zos password ntawm tus account tam sim no.
Yog hais tias ib feem ntawm cov ntawv nyeem tsis tau tab sis zoo li yuav tsum formatted zoo, feem ntau yuav ua txhaum yog ib tug cim encoding mismatch nyob rau hauv lub davhlau ya nyob twg. Ntxiv qhov -U parameter rau qhov kev tshuaj ntsuam kab lus sib cav yuam kom nws siv UTF-8 rau cov cim encoding:
$ sudo npo -U 115200 XNUMX Nws
Terminal Chaw
Cov chaw siv nyob rau hauv qhov kev pab cuam davhlau ya nyob twg yog:
- Ceev
115200 baud, qhov ceev ntawm BIOS - Cov ntaub ntawv
8 - Parity
Tsis muaj - Nres cov khoom
1 - Flow Control
Tawm los yog XON / OFF.
Ceeb toom: Hardware flow control (RTS/CTS) yuav tsum raug kaw
Terminal Optimization
Tshaj li qhov yuav tsum tau muaj, muaj cov kev xaiv ntxiv hauv cov kev pabcuam davhlau ya nyob twg uas yuav pab txhawb kev coj tus cwj pwm thiab tso zis tso tawm kom ntseeg tau qhov kev paub zoo tshaj plaws. Cov kev teeb tsa no sib txawv qhov chaw thiab kev txhawb nqa los ntawm cov neeg siv khoom, thiab yuav tsis muaj nyob hauv txhua tus neeg siv khoom lossis cov khoom siv.
Cov no yog
- Terminal Hom
xterm
Qhov kev teeb tsa no yuav nyob hauv Terminal, Terminal Emulation, lossis thaj chaw zoo sib xws. - Kev them nyiaj yug xim
ANSI xim / 256 Xim / ANSI nrog 256 Xim
Qhov kev teeb tsa no yuav nyob rau hauv Terminal Emulation, Qhov rai Xim, Ntawv nyeem, Advanced Terminfo, lossis thaj chaw zoo sib xws. - Cim Cim / Cim Cim Encoding
UTF-8
Qhov kev teeb tsa no yuav nyob rau hauv Terminal Appearance, Qhov rai Txhais lus, Advanced International, lossis thaj chaw zoo sib xws. Hauv GNU screen qhov no yog qhib los ntawm kev hla qhov -U parameter. - Kab kos
Nrhiav thiab ua kom muaj kev teeb tsa xws li "Kaw kab duab", "Siv unicode graphics cim", thiab / lossis "Siv Unicode kab kos cov ntsiab lus".
Cov chaw no tej zaum yuav nyob rau hauv Terminal Appearance, Window Translation, los yog cov chaw zoo sib xws. - Function Keys / Keypad
Xterm R6
Nyob rau hauv Putty qhov no yog nyob rau hauv Terminal> Keyboard thiab tau sau npe Cov Ntsiab Lus Ua Haujlwm thiab Keypad. - Font
Rau qhov kev paub zoo tshaj plaws, siv cov ntawv niaj hnub monospace unicode xws li Deja Vu Sans Mono, Liberation Mono, Monaco, Consolas, Fira Code, lossis zoo sib xws.
Qhov chaw no tej zaum yuav nyob rau hauv Terminal Appearance, Qhov rai tshwm, ntawv nyeem, los yog cov chaw zoo sib xws.
Tom ntej no yog dab tsi?
Tom qab txuas tus neeg siv lub davhlau ya nyob twg, nws yuav tsis pom tam sim ntawd. Qhov no tuaj yeem yog vim tias lub cuab yeej twb pib ua tiav lawm lossis nws yuav yog tias lub cuab yeej tos rau qee qhov kev tawm tswv yim.
Yog tias lub cuab yeej tseem tsis tau siv fais fab, ntsaws rau hauv thiab saib xyuas lub davhlau ya nyob twg.
Yog tias lub cuab yeej twb tau qhib lawm, sim nias qhov chaw. Yog tias tseem tsis tau tso tawm, nias Enter. Yog hais tias lub cuab yeej tau booted, nws yuav tsum redisplay tus ID nkag mus tam sim los yog tsim lwm yam tso zis qhia txog nws cov xwm txheej.
Kev daws teeb meem
Serial Device ploj lawm
Nrog rau USB serial console muaj ob peb lub laj thawj vim li cas qhov chaw nres nkoj serial yuav tsis muaj nyob rau hauv cov neeg siv khoom siv, suav nrog:
Tsis muaj zog
Qee cov qauv xav tau lub zog ua ntej tus neeg siv tuaj yeem txuas rau USB serial console.
USB Cable Tsis Plug
Rau USB consoles, USB cable tej zaum yuav tsis ua tiav tag nrho ntawm ob qho kawg. Maj mam, tab sis khov kho, xyuas kom cov cable muaj kev sib txuas zoo ntawm ob sab.
Tsis zoo USB Cable
Qee qhov USB cables tsis haum rau siv los ua cov ntaub ntawv cables. Rau example, qee cov cables tsuas yog muaj peev xwm xa hluav taws xob rau kev them nyiaj thiab tsis ua raws li cov ntaub ntawv cables. Lwm tus yuav tsis zoo lossis muaj cov khoom siv tsis zoo lossis hnav tsis zoo.
Qhov zoo tshaj plaws cable siv yog ib qho uas tuaj nrog lub cuab yeej. Ua tsis tau li ntawd, xyuas kom cov cable yog hom thiab specifications, thiab sim ntau yam cables.
Device tsis raug
Qee zaum yuav muaj ntau yam khoom siv serial muaj. Xyuas kom tseeb tias qhov siv los ntawm tus neeg siv khoom serial yog qhov tseeb. Qee cov khoom siv nthuav tawm ntau qhov chaw nres nkoj, yog li siv qhov chaw nres nkoj tsis raug tuaj yeem ua rau tsis muaj qhov tso tawm lossis tsis xav tau cov zis.
Hardware FailureNws tuaj yeem muaj qhov kho vajtse tsis ua haujlwm tiv thaiv lub serial console los ntawm kev ua haujlwm. Hu rau Netgate TAC rau kev pab cuam.
Tsis muaj Serial Output
Yog tias tsis muaj qhov tso tawm tag nrho, xyuas cov khoom hauv qab no:
USB Cable Tsis Plug
Rau USB consoles, USB cable tej zaum yuav tsis ua tiav tag nrho ntawm ob qho kawg. Maj mam, tab sis khov kho, xyuas kom cov cable muaj kev sib txuas zoo ntawm ob sab.
Device tsis raug
Qee zaum yuav muaj ntau yam khoom siv serial muaj. Xyuas kom tseeb tias qhov siv los ntawm tus neeg siv khoom serial yog qhov tseeb. Qee cov khoom siv nthuav tawm ntau qhov chaw nres nkoj, yog li siv qhov chaw nres nkoj tsis raug tuaj yeem ua rau tsis muaj qhov tso tawm lossis tsis xav tau cov zis.
Tsis ncaj ncees lawm Terminal Settings
Xyuas kom meej tias qhov kev pab cuam lub davhlau ya nyob twg raug teeb tsa rau qhov tseeb ceev. Lub neej ntawd BIOS ceev yog 115200, thiab ntau lwm yam kev khiav hauj lwm niaj hnub siv qhov ceev thiab.
Qee qhov kev ua haujlwm qub lossis cov kev cai teeb tsa yuav siv qeeb qeeb xws li 9600 lossis 38400.
Ntaus OS Serial Console Chaw
Xyuas kom lub operating system tau teeb tsa rau lub console kom zoo (xws li ttyS1 hauv Linux). Nrog rau ntau yam kev khiav hauj lwm nruab kev qhia ntawm lub xaib no kom paub ntxiv.
PuTTY muaj teeb meem nrog kab kos
PuTTY feem ntau ua haujlwm feem ntau OK tab sis tuaj yeem muaj teeb meem nrog kab kos cov cim ntawm qee lub platform. Cov kev teeb tsa no zoo li ua haujlwm zoo tshaj plaws (kuaj ntawm Windows):
- Qhov rai
Kab x Kab
80 × 24 hli - Qhov rai > Appearance
Font
Courier Tshiab 10pt los yog Consolas 10pt - Qhov rai > Txhais
Chaw Taws Teeb Cim Cim - Siv font encoding lossis UTF-8
Kev tuav cov kab kos cov cim
Siv font hauv ob qho tib si ANSI thiab OEM hom lossis Siv Unicode kab kos cov ntsiab lus - Qhov rai > Xim
Qhia cov ntawv bolded los ntawm kev hloov
Xim
Garbled Serial Output
Yog hais tias cov zis serial zoo nkaus li garbled, tsis muaj cim, binary, los yog random cim xyuas cov khoom hauv qab no:
Flow Control
Qee qhov kev tswj hwm ntws tuaj yeem cuam tshuam nrog kev sib txuas lus, ua rau cov cim poob lossis lwm yam teeb meem. Disabling flow control nyob rau hauv tus neeg siv yuav muaj peev xwm kho qhov teeb meem no.
Ntawm PuTTY thiab lwm tus neeg siv GUI feem ntau yog ib qho kev xaiv rau kev lov tes taw ntws tswj. Nyob rau hauv PuTTY, Flow Control xaiv nyob rau hauv qhov chaw ntoo nyob rau hauv kev twb kev txuas, ces Serial.
Txhawm rau lov tes taw tswj kev khiav hauv GNU Screen, ntxiv qhov -ixon thiab / lossis -ixoff tsis tau tom qab qhov nrawm nrawm raws li hauv qab no example:
$ sudo npo 115200, -ib
Terminal Ceev
Xyuas kom meej tias qhov kev pab cuam lub davhlau ya nyob twg raug teeb tsa rau qhov tseeb ceev. (Saib tsis muaj Serial Output)
Cim Encoding
Xyuas kom meej tias qhov kev pab cuam davhlau ya nyob twg tau teeb tsa rau tus cwj pwm zoo, xws li UTF-8 lossis Latin-1, nyob ntawm qhov kev ua haujlwm. (Saib GNU Screen)
Serial Output nres tom qab lub BIOS
Yog tias serial tso zis rau BIOS tab sis nres tom qab, xyuas cov khoom hauv qab no:
Terminal Ceev
Xyuas kom meej tias qhov kev pab cuam lub davhlau ya nyob twg tau teeb tsa rau qhov tseeb ceev rau lub tshuab ua haujlwm nruab. (Saib tsis muaj Serial Output)
Ntaus OS Serial Console Chaw
Xyuas kom tseeb tias qhov teeb tsa ua haujlwm tau teeb tsa los qhib lub serial console thiab tias nws tau teeb tsa rau lub console kom zoo (xws li ttyS1 hauv Linux). Nrog rau ntau yam kev khiav hauj lwm nruab kev qhia ntawm lub xaib no kom paub ntxiv.
Bootable Media
Yog tias booting los ntawm USB flash drive, xyuas kom meej tias tus tsav tau sau raug thiab muaj cov duab ua haujlwm bootable.
QHOV CHAW UA HAUJ LWM
- Kev Pabcuam
Kev them nyiaj yug tsis suav nrog ntau txoj haujlwm xws li kev tsim network thiab kev hloov pauv los ntawm lwm qhov firewalls. Cov khoom no tau muab los ua cov kev pabcuam tshaj lij thiab tuaj yeem yuav thiab teem sijhawm raws li.
https://www.netgate.com/our-services/professional-services.html - Netgate Kev cob qhia
Netgate kev cob qhia muaj cov kev cob qhia rau kev nce koj cov kev paub ntawm Netgate cov khoom thiab cov kev pabcuam. Txawm hais tias koj yuav tsum tswj lossis txhim kho kev ruaj ntseg ntawm koj cov neeg ua haujlwm lossis muab kev txhawb nqa tshwj xeeb thiab txhim kho koj cov neeg siv khoom txaus siab; Netgate kev cob qhia tau pab koj.
https://www.netgate.com/training/ - Resource Library
Txhawm rau kawm paub ntxiv txog kev siv koj cov cuab yeej Netgate thiab rau lwm yam kev pab cuam, nco ntsoov mus saib peb Lub Tsev Qiv Ntawv.
https://www.netgate.com/resources/
WARRANTY THIAB SUPPORT
- Ib xyoos cov chaw tsim khoom warranty.
- Thov hu rau Netgate rau cov ntaub ntawv pov thawj lossis view cov khoom Lifecycle page.
- Txhua Specifications yuav hloov tsis tau ceeb toom.
Kev Pab Txhawb Kev Lag Luam suav nrog kev siv software nquag, kom paub ntau ntxiv view nplooj ntawv Netgate Ntiaj Teb Kev Txhawb.
Saib ntxiv:
Yog xav paub ntxiv txog kev siv TNSR® software, saib TNSR Documentation and Resource Library.
FAQ
- Q: Kuv puas tuaj yeem siv tooj liab SFP / SFP + modules ntawm Netgate 6100 MAX?
A: Tsis yog, qhov built-in SFP interfaces tsis txhawb tooj liab Ethernet connectors (RJ45). - Q: Kuv yuav ua li cas kaw qhov zoo ntawm lub router?
A: Luv nias lub zog khawm rau 3-5 vib nas this.
Cov ntaub ntawv / Cov ntaub ntawv
 |
netgate 6100 MAX Router ruaj ntseg [ua pdf] Tus neeg siv phau ntawv 6100 MAX Router ruaj ntseg, 6100 MAX, Router ruaj ntseg, Router |
