NATIONAL INSTRUMENTS SCXI-1129 Matrix Hloov Module

Cov ntaub ntawv khoom

Cov khoom raug xa mus rau hauv phau ntawv siv yog SCXI-1129 Terminal Block rau NI SCXI-1337. Nws yog ib qho khoom siv rau kev sib txuas cov teeb liab hauv kev ntsuas qhov system. Lub davhlau ya nyob twg thaiv yog tsim los siv nrog SCXI chassis thiab SCXI-1129 hloov module. Nws yog ib qho tseem ceeb uas yuav tau ua raws li cov lus qhia tau muab los xyuas kom meej kev teeb tsa thiab kev siv lub davhlau ya nyob twg thaiv.

Cov lus qhia siv khoom

Unpack Terminal Block:

Txhawm rau zam kev puas tsuaj, ua raws li cov lus ceeb toom no:

• • • Tsis txhob kov cov pins raug tawm ntawm cov khoom sib txuas.
    • Tshawb xyuas lub davhlau ya nyob twg thaiv kom cov khoom xoob xoob lossis ib qho cim ntawm kev puas tsuaj. Qhia rau NI yog tias pom muaj kev puas tsuaj.
    • Khaws SCXI-1337 hauv lub hnab ntawv antistatic thaum tsis siv.

Txheeb xyuas cov Cheebtsam:

Xyuas kom tseeb tias koj muaj cov khoom hauv qab no:

• • • SCXI-1337 davhlau ya nyob twg thaiv
    • SCXI chassis
    • SCXI-1129 hloov module
    • 1/8 in. flathead screwdriver
    • Number 1 thiab 2 Phillips ntswj ntsia hlau
    • Ntev-lub qhov ntswg pliers
    • Hlau cutter
    • Hlau rwb thaiv tsev stripper

Txuas Cov Hluav Taws Xob:

Txhawm rau txuas cov teeb liab mus rau lub davhlau ya nyob twg thaiv, ua raws cov kauj ruam no:

1. • Xyuas kom lub module tsis siv rau kev sib txuas rau cov teeb liab los yog kev ntsuas nyob rau hauv Qeb II, III, los yog IV, los yog rau MAINS muab circuits.
   • Npaj cov teeb liab xaim los ntawm stripping lub rwb thaiv tsev tsis pub tshaj 7 hli los ntawm qhov kawg ntawm cov hlau.
   • Tshem lub hau npog sab saum toj thiab tshem tawm / tshem tawm lub hau saum toj kawg nkaus.
   • Loosen ob strain-relief screws ntawm lub strain-relief bar.
   • Khiav cov teeb liab xov hlau los ntawm qhov qhib-txhim kho.
   • Ntxig lub stripped kawg ntawm cov hlau tag nrho rau hauv lub davhlau ya nyob twg thiab ruaj ntseg nws.

Ua raws li cov lus qhia no yuav ua kom muaj kev txhim kho thiab kev siv ntawm SCXI-1129 Terminal Block rau NI SCXI-1337.

INSTALLATION cov lus qhia

Terminal Thaiv rau NI SCXI-1129
Phau ntawv qhia no piav qhia txog yuav ua li cas rau nruab thiab txuas cov teeb liab mus rau National Instruments SCXI-1337 davhlau ya nyob twg thaiv kom teeb tsa SCXI-1129 hloov module ua dual 8 × 16 matrix. Ntsia hlau terminals ntawm SCXI-1337 tso cai rau koj nkag mus rau txhua 8 × 16 matrix. SCXI-1337 kuj muaj cov kev sib txuas rau cov khoom siv scanner siab tshaj tawm thiab cov khoom siv sab nraud ua rau cov teeb liab. Xa mus rau NI Switches Tau Txais Kev Qhia Qhia los txiav txim siab thaum twg los teeb tsa lub davhlau ya nyob twg thaiv. Mus saib ni.com/switches rau cov ntaub ntawv ntawm lwm cov kev hloov pauv.

Cov rooj sib txoos

Cov rooj sib tham hauv qab no yog siv rau hauv phau ntawv qhia no: Lub » cim coj koj los ntawm cov khoom noj khoom haus nested thiab dialog box xaiv rau qhov kawg nkaus. Cov kab ke File»Page Setup»Cov kev xaiv qhia koj kom rub tawm File ntawv qhia zaub mov, xaiv cov khoom teeb tsa nplooj ntawv, thiab xaiv Cov Kev Xaiv los ntawm lub thawv ntawv kawg. Lub cim no qhia txog ib daim ntawv, uas ceeb toom koj txog cov ntaub ntawv tseem ceeb. Lub cim no qhia txog kev ceev faj, uas qhia koj txog kev ceev faj kom tsis txhob raug mob, cov ntaub ntawv poob, lossis kev sib tsoo. Thaum lub cim no tau cim rau ntawm ib yam khoom, xa mus rau Nyeem Kuv Ua Ntej: Daim Ntawv Pov Thawj Kev Nyab Xeeb thiab Xov Tooj Cua-Frequency Interference rau cov ntaub ntawv hais txog kev ceev faj.
Ua siab loj ntawv nyeem qhia cov khoom uas koj yuav tsum xaiv los yog nyem rau hauv lub software, xws li cov ntawv qhia zaub mov thiab dialog box xaiv. Bold text kuj qhia cov npe parameter.
Italic cov ntawv qhia txog qhov sib txawv, qhov tseem ceeb, kev siv tus ntoo khaub lig, lossis kev qhia txog lub ntsiab lus tseem ceeb. Cov font no kuj txhais cov ntawv uas yog qhov chaw rau ib lo lus lossis tus nqi uas koj yuav tsum muab
monospace Cov ntawv hauv font no qhia txog cov ntawv lossis cov cim uas koj yuav tsum nkag los ntawm cov keyboard, ntu ntawm cov lej, programming examples, and syntax examples. Cov font no kuj siv tau rau cov npe kom raug ntawm disk drives, paths, directory, programs, subprograms, subroutines, device names, functions, operations, variables, filecov npe thiab cov ntawv txuas ntxiv, thiab cov ntawv sau code.

Unpack Terminal Block

Txhawm rau kom tsis txhob muaj kev puas tsuaj hauv kev tuav lub davhlau ya nyob twg, ua raws li kev ceev faj hauv qab no:
Ceev faj Tsis txhob kov cov pins raug tawm ntawm cov khoom sib txuas.

• Hauv av koj tus kheej siv lub pluaj hauv av los yog kov cov khoom hauv av.
• Kov lub pob antistatic rau ib feem hlau ntawm koj lub computer chassis ua ntej tshem lub davhlau ya nyob twg los ntawm pob.

Tshem lub davhlau ya nyob twg thaiv ntawm lub pob thiab tshuaj xyuas lub davhlau ya nyob twg thaiv kom tsis txhob xoob cov khoom lossis ib qho kev puas tsuaj. Ceeb toom NI yog tias lub davhlau ya nyob twg thaiv zoo li puas lawm. Tsis txhob nruab ib lub davhlau ya nyob twg puas rau hauv koj lub cev. Khaws SCXI-1337 hauv lub hnab ntawv antistatic thaum tsis siv.

Txheeb xyuas cov Cheebtsam

Xyuas kom tseeb tias koj muaj cov khoom hauv qab no:

• SCXI-1337 davhlau ya nyob twg thaiv
• SCXI chassis
• SCXI-1129 hloov module
• 1/8 in. flathead screwdriver
• Number 1 thiab 2 Phillips ntswj ntsia hlau
• Ntev-lub qhov ntswg pliers
• Hlau cutter
• Hlau rwb thaiv tsev stripper

Txuas Cov Hluav Taws Xob

Txhawm rau txuas cov teeb liab (s) mus rau lub davhlau ya nyob twg thaiv, xa mus rau daim duab 1 thiab 2 thaum ua tiav cov kauj ruam hauv qab no:
Ceev faj Qhov kev ntsuas no yog ntsuas rau Kev Ntsuas Qib I thiab npaj los nqa cov teeb liab voltages tsis muaj ntau dua 150 V. Qhov module no tuaj yeem tiv taus txog 800 V impulse voltage. Tsis txhob siv cov qauv no rau kev sib txuas rau cov teeb liab lossis rau kev ntsuas hauv Pawg II, III, lossis IV. Tsis txhob txuas rau MAINS cov khoom siv hluav taws xob (example, phab ntsa qhov hluav taws xob) ntawm 115 lossis 230 VAC. Xa mus rau NI Switches Tau Pib Qhia Phau Ntawv Qhia kom paub ntau ntxiv txog kev ntsuas pawg. Thaum muaj xwm txheej voltages (> 42.4 Vpk / 60 VDC) muaj nyob rau ntawm txhua lub relay davhlau ya nyob twg, kev nyab xeeb qis-voltage (≤42.4 Vpk / 60 VDC) tsis tuaj yeem txuas mus rau lwm qhov relay davhlau ya nyob twg.

1. Npaj cov teeb liab xaim los ntawm stripping lub rwb thaiv tsev tsis pub tshaj 7 hli los ntawm qhov kawg ntawm cov hlau.
2. Tshem lub hau npog saum toj kawg nkaus.
3. Unsnap thiab tshem tawm lub hau saum toj kawg nkaus.
4. Loosen ob strain-relief screws ntawm lub strain-relief bar.
5. Khiav cov teeb liab xov hlau los ntawm qhov qhib-txhim kho.
6. Ntxig lub stripped kawg ntawm cov hlau tag nrho rau hauv lub davhlau ya nyob twg. Ruaj ntseg cov hlau los ntawm kev zawm cov ntsia hlau ntawm lub davhlau ya nyob twg. Tsis muaj cov hlau liab qab yuav tsum txuas mus dhau ntawm cov ntsia hlau davhlau ya nyob twg. Cov xaim raug nthuav tawm ua rau muaj kev pheej hmoo ntawm qhov luv luv ua rau tsis ua haujlwm.
7. Txuas lub ntiaj teb kev nyab xeeb rau hauv av kev nyab xeeb.
8. Tighten ob lub screws ntawm lub strain-relief los ua ke kom ruaj ntseg cables.
9. Txhim kho lub hau sab saum toj.
10. Hloov lub hau npog sab saum toj.
    1. Top Cover
    2. Sab saum toj Ntsia Hlau

Daim duab 1. SCXI-1337 Top Cover Diagram

1. Ntsia Hlau Terminals
2. Tsheb Connector
3. Thimthov
4. Strain-Relief Screw
5. Strain-Relief Bar
6. Safety Ground Lug

Daim duab 2. SCXI-1337 Parts Locator Diagram

Nruab Terminal Block

Txhawm rau txuas SCXI-1337 mus rau SCXI-1129 pem hauv ntej vaj huam sib luag, saib daim duab 3 thiab ua tiav cov kauj ruam hauv qab no:
Nco tseg Nruab SCXI-1129 yog tias koj tsis tau ua li ntawd. Xa mus rau NI Switches Tau Txais Kev Qhia Qhia kom paub ntau ntxiv.

1. Txuas lub SCXI-1337 mus rau pem hauv ntej connector ntawm SCXI-1129.
2. Tighten tus ntiv tes xoo sab saum toj thiab hauv qab ntawm sab nraum qab ntawm lub davhlau ya nyob twg thaiv lub vaj huam sib luag kom tuav nws ruaj ntseg hauv qhov chaw.
   1. Thumbscrews
   2. Pem hauv ntej Connector
   3. TSI-1129
   4. TSI-1337

Specifications

Kev ua haujlwm siab tshaj plaws Voltage

• Ua haujlwm siab tshaj voltage hais txog lub teeb liab voltage plus the common-mode voltage.
• Channel-to-earth………………………………………. 150 V, Installation Qeb I
• Channel-rau-channel ………………………….. 150 V

Qhov siab tshaj tam sim no

• Qhov siab tshaj tam sim no (ib channel) ………………………………… 2 ADC, 2 AAC

Ib puag ncig

• Kev khiav hauj lwm kub…………………………. 0 txog 50 ° C
• Cia kub………………………………………. -20 rau 70 ° C
• Humidity …………………………………………………… 10 ~ 90% RH, non-condensing
• Pollution Degree ……………………………………… 2
• Pom zoo ntawm qhov siab txog li 2,000 m
• Kev siv sab hauv tsev nkaus xwb

Kev nyab xeeb
Cov khoom no yog tsim los ua kom tau raws li cov qauv hauv qab no ntawm kev nyab xeeb rau cov khoom siv hluav taws xob rau kev ntsuas, tswj, thiab kev siv hauv chav kuaj:

• TS EN 61010-1, IEC 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1

Nco tseg Rau UL thiab lwm cov ntawv pov thawj kev nyab xeeb, xa mus rau cov khoom lag luam daim ntawv lo, lossis mus ntsib ni.com/certification, tshawb nrhiav los ntawm tus qauv naj npawb lossis cov kab khoom, thiab nyem qhov txuas tsim nyog hauv kab ntawv pov thawj.

Electromagnetic Compatibility

• Emissions ……………………………………………… EN 55011 Chav Kawm A ntawm 10 m FCC Ntu 15A saum 1 GHz
• Kev tiv thaiv ……………………………………………… EN 61326: 1997 + A2: 2001, Table 1
• EMC/EMI …………………………………………..CE, C-Tick and FCC Part 15 (Class A) Ua raws

Nco tseg Txhawm rau ua raws li EMC, koj yuav tsum khiav cov cuab yeej no nrog kev tiv thaiv kab.

Ua raws li CE

Cov khoom no ua tau raws li cov kev cai tseem ceeb ntawm European Cov Lus Qhia, uas tau hloov kho rau CE kos npe, raws li hauv qab no:

• Tsawg-Voltage Cov Lus Qhia (kev nyab xeeb)…………..73/23/EEC
• Electromagnetic Compatibility
• Cov Lus Qhia (EMC) ……………………………………….89/336/EEC

Nco tseg Xa mus rau Daim Ntawv Tshaj Tawm Txog Kev Ua Raws Cai (DoC) rau cov khoom no rau cov ntaub ntawv ntxiv txog kev ua raws cai. Txhawm rau kom tau DoC rau cov khoom no, mus saib ni.com/certification, tshawb nrhiav los ntawm tus qauv naj npawb lossis cov kab khoom, thiab nyem qhov txuas tsim nyog hauv kab ntawv pov thawj.

National Instruments, NI, ni.com ib, and LabVIEW yog cov cim lag luam ntawm National Instruments Corporation. Saib rau Cov Lus Cog Tseg ntawm Kev Siv Tshooj ntawm ni.com/legal Yog xav paub ntxiv txog National Instruments trademarks. Lwm cov khoom lag luam thiab cov npe tuam txhab tau hais hauv no yog cov cim lag luam lossis cov npe lag luam ntawm lawv cov tuam txhab. Rau patents npog National Instruments cov khoom, xa mus rau qhov chaw tsim nyog: Pab » Patents hauv koj software, patents.txt file hauv koj daim CD, los yog ni.com/patents. © 2001–2007 National Instruments Corporation. Txhua txoj cai. 372791C Nov 07 NI SCXI-1337 Installation Instructions 2 ni.com ib.

Cov ntaub ntawv / Cov ntaub ntawv

	NATIONAL INSTRUMENTS SCXI-1129 Matrix Hloov Module [ua pdf] Daim ntawv qhia kev teeb tsa SCXI-1129, SCXI-1129 Matrix Hloov Module, Matrix Hloov Module, Hloov Module, Module
	NATIONAL INSTRUMENTS SCXI-1129 Matrix Hloov Module [ua pdf] Phau ntawv qhia SCXI-1129, SCXI-1129 Matrix Hloov Module, Matrix Hloov Module, Hloov Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv