NATIONAL INSTRUMENTS Data Acquisition QAQ Device thiab Software User Guide

Cov ntsiab lus zais

1 Data Acquisition QAQ Device thiab Software

2 Khoom Qhia: USB-6216 DAQ

3 Cov lus qhia siv khoom

4 Paub meej Device Recognition

5 Siv qhov ntsuas NI-DAQmx

6 Kev daws teeb meem

7 Cov ntaub ntawv / Cov ntaub ntawv

7.1 Cov ntaub ntawv

8 Related Posts

Data Acquisition QAQ Device thiab Software

Khoom Qhia: USB-6216 DAQ

USB-6216 yog cov ntaub ntawv tau txais (DAQ) ntaus ntawv los ntawm National Instruments uas tso cai rau cov neeg siv ntsuas lossis tsim cov cim analog lossis digital. Cov cuab yeej tuaj yeem txuas nrog lub computer ntawm USB thiab tuaj yeem teeb tsa siv NI MAX software. Cov cuab yeej tseem txhawb cov teeb liab txias thiab hloov kho vajtse rau kev ntsuas kev siv ntau dua.

Cov lus qhia siv khoom

Ua raws li cov lus qhia hauv qab no kom siv USB-6216 DAQ ntaus ntawv:

Paub meej Device Recognition

Tua tawm NI MAX software los ntawm ob-nias lub NI MAX icon ntawm lub desktop lossis nyem NI MAX los ntawm NI Launcher (Windows 8).

Nthuav Devices thiab Interfaces kom paub meej tias cov cuab yeej raug kuaj pom. Yog tias siv cov khoom siv nyob deb, xyuas kom meej lub npe lub npe yog cDAQ–, WLS-, lossis ENET-. Yog tias lub npe tswv tau hloov kho, xa mus rau cov ntaub ntawv ntaus ntawv.
Txoj cai-nias lub cuab yeej thiab xaiv Kev Ntsuas Tus Kheej. Yog tias muaj teeb meem tshwm sim, xa mus rau ni.com/support/daqmx rau kev txhawb nqa.

Rau NI M thiab X Series PCI Express pab kiag li lawm, right-click lub cuab yeej thiab xaiv tus kheej-Calibrate. Nyem Finish thaum calibration tiav.

Configure Device Settings
Configure txhua lub cuab yeej nrog configurable chaw uas koj nruab:

Right-click lub npe ntaus ntawv thiab xaiv Configure.
Ntxiv accessories raws li tau piav nyob rau hauv cov ntaub ntawv ntaus ntawv. Nyem Scan rau TEDS los teeb tsa TEDS sensors txuas ncaj qha mus rau lub cuab yeej.
Nyem OK kom txais cov kev hloov pauv.

Nruab Cov Cuab Yeej Cuab Yeej lossis Hloov Cov Khoom Siv
Yog tias koj lub kaw lus suav nrog SCXI teeb tsa kev hloov pauv, Cov Txheej Txheem Kho Mob (SCC) xws li SC cov neeg nqa khoom thiab SCC modules, lub davhlau ya nyob twg thaiv, lossis hloov cov qauv, xa mus rau cov ntaub ntawv ntaus ntawv txhawm rau nruab thiab teeb tsa lub teeb liab lossis hloov kho vajtse.

Khiav Test Panels
Xa mus rau cov ntaub ntawv ntawm cov cuab yeej rau kev sim panels thiab yuav ua li cas khiav lawv.

Siv qhov ntsuas NI-DAQmx
NI-DAQmx Raws thiab Cov Haujlwm: Lub cev lub cev yog lub davhlau ya nyob twg lossis tus pin uas koj tuaj yeem ntsuas lossis tsim cov teeb liab analog lossis digital. Ib lub channel virtual qhia lub npe rau lub cev channel thiab nws cov chaw, xws li kev sib txuas ntawm lub davhlau ya nyob twg, hom kev ntsuas lossis tiam, thiab cov ntaub ntawv ntsuas. Hauv NI-DAQmx, cov channel virtual yog qhov tseem ceeb rau txhua qhov kev ntsuas.

DAQ Phau Ntawv Qhia Pib Pib
Phau ntawv qhia no piav qhia txog yuav ua li cas kom paub meej tias koj NI cov ntaub ntawv tau txais (DAQ) cov cuab yeej ua haujlwm tau zoo. Nruab koj daim ntawv thov thiab tsav tsheb software, tom qab ntawd koj lub cuab yeej, siv cov lus qhia ntim nrog koj lub cuab yeej.

Paub meej Device Recognition

Ua kom tiav cov kauj ruam hauv qab no:

Tua tawm MAX los ntawm ob-nias NI MAX icon ntawm lub desktop, lossis (Windows 8) los ntawm txhaj NI MAX los ntawm NI Launcher.
Nthuav Devices thiab Interfaces kom paub meej tias koj lub cuab yeej raug kuaj pom. Yog tias koj siv lub hom phiaj RT tej thaj chaw deb, nthuav cov Chaw Taws Teeb, nrhiav thiab nthuav koj lub hom phiaj, thiab tom qab ntawd nthuav cov cuab yeej thiab cov interfaces. Yog tias koj lub cuab yeej tsis tau teev tseg, nias kom refresh tus ntoo configuration. Yog tias lub cuab yeej tseem tsis tau paub, xa mus rau ni.com/support/daqmx.
Rau Network DAQ ntaus ntawv, ua cov hauv qab no:
- Yog hais tias lub Network DAQ ntaus ntawv tau teev nyob rau hauv Devices and Interfaces » Network Devices, right-click it and select Add Device.
- Yog tias koj lub Network DAQ ntaus ntawv tsis tau teev tseg, nyem rau ntawm Network Devices, thiab xaiv Nrhiav Network NI-DAQmx Devices. Hauv Add Device Manually teb, ntaus Network DAQ ntaus lub npe tswv lossis IP chaw nyob, nyem lub pob +, thiab nyem Ntxiv Xaiv Cov Khoom Siv. Koj lub cuab yeej yuav raug ntxiv rau hauv Cov Khoom Siv thiab Cov Khoom Siv » Network Devices.
  Nco tseg: Yog tias koj tus neeg rau zaub mov DHCP tau teeb tsa kom tau txais kev sau npe tus tswv lub npe, lub cuab yeej sau npe lub npe lub npe ua haujlwm li cDAQ- - , NWS- los yog ENET- . Koj tuaj yeem pom tus lej xov tooj ntawm lub cuab yeej. Yog tias koj nrhiav tsis tau tus tswv lub npe ntawm daim foos ntawd, nws yuav raug hloov kho los ntawm lub neej ntawd mus rau lwm tus nqi.
  Yog tias koj tseem tsis tuaj yeem nkag mus rau koj lub Network DAQ ntaus ntawv, nyem qhov Nyem qhov no rau cov lus qhia daws teeb meem yog tias koj lub cuab yeej tsis tshwm sim nyob rau hauv Nrhiav Network NI-DAQmx Devices qhov rai lossis mus rau ni.com/info thiab nkag mus rau Info Code netdaq pab.
  Tswv yim: Koj tuaj yeem sim NI-DAQmx daim ntawv thov yam tsis muaj kev txhim kho kho vajtse los ntawm kev siv NI-DAQmx simulated ntaus ntawv. Rau cov lus qhia ntawm kev tsim NI-DAQmx simulated li thiab importing
  NI-DAQmx simulated ntaus ntawv configurations rau lub cev pab kiag li lawm, nyob rau hauv MAX, xaiv Help»Help Topics» NI-DAQmx»MAX Pab rau NI-DAQmx.

Txoj cai-nias lub cuab yeej thiab xaiv Kev Ntsuas Tus Kheej. Thaum qhov kev ntsuam xyuas tus kheej tiav lawm, cov lus qhia tau hais tias muaj kev pov thawj tiav lossis yog tias muaj teeb meem tshwm sim. Yog tias muaj teeb meem tshwm sim, xa mus rau ni.com/support/daqmx.
Rau NI M thiab X Series PCI Express pab kiag li lawm, right-click lub cuab yeej thiab xaiv tus kheej-Calibrate. Lub qhov rais qhia txog cov xwm txheej ntawm calibration. Nyem Ua kom tiav.

Configure lub Device Settings
Qee cov khoom siv, xws li NI-9233 thiab qee cov khoom siv USB, tsis xav tau cov khoom siv rau kev teeb tsa, RTSI, topologies, lossis jumper nqis. Yog tias koj tab tom txhim kho cov khoom siv nkaus xwb yam tsis muaj cov khoom tsim tau, hla mus rau kauj ruam tom ntej. Configure txhua lub cuab yeej nrog configurable chaw uas koj nruab:

Right-click lub npe ntaus ntawv thiab xaiv Configure. Nco ntsoov nyem lub npe ntaus ntawv nyob rau hauv daim nplaub tshev rau lub kaw lus (Kuv Qhov System lossis Chaw Taws Teeb) thiab NI-DAQ API uas koj xav tswj lub cuab yeej.
Rau Network DAQ li, nyem lub npe ntaus ntawv thiab tom qab ntawd lub Network Settings tab los teeb tsa lub network teeb tsa. Yog xav paub ntxiv txog kev teeb tsa Network DAQ li, saib koj cov ntaub ntawv ntaus ntawv.

Configure cov cuab yeej cuab tam.
- Yog tias koj siv cov khoom siv ntxiv, ntxiv cov ntaub ntawv ntxiv.
- Rau IEEE 1451.4 transducer electronic data sheet (TEDS) sensors thiab accessories, teeb tsa lub cuab yeej thiab ntxiv cov khoom siv ntxiv raws li tau piav qhia dhau los. Nyem Scan rau TEDS. Txhawm rau teeb tsa TEDS sensors txuas ncaj qha mus rau lub cuab yeej, hauv MAX, txoj cai-nias lub cuab yeej hauv qab Cov Khoom Siv thiab Cov Khoom Siv thiab xaiv Configure TEDS.
Nyem OK kom lees txais cov kev hloov pauv.

Nruab Cov Cuab Yeej Cuab Yeej lossis Hloov Cov Khoom Siv
Yog tias koj lub kaw lus suav nrog SCXI cov teeb liab txias modules, Cov Khoom Siv Teeb Meem Teeb Meem (SCC) xws li SC cov neeg nqa khoom thiab SCC modules, lub davhlau ya nyob twg, lossis hloov cov qauv, xa mus rau cov lus qhia pib rau cov khoom rau nruab thiab teeb tsa lub teeb liab txias lossis hloov kho vajtse.

Txuas cov sensors thiab cov kab teeb liab
Txuas cov sensors thiab cov kab teeb liab rau lub davhlau ya nyob twg thaiv lossis cov khoom siv txuas ntxiv rau txhua lub cuab yeej ntsia. Koj tuaj yeem nrhiav cov khoom siv davhlau ya nyob twg / pinout qhov chaw hauv MAX, NI-DAQmx Pab, lossis cov ntaub ntawv ntaus ntawv. Hauv MAX, right-click the device name under Devices and Interfaces, thiab xaiv Device Pinouts.
Yog xav paub ntxiv txog cov sensors, xa mus rau ni.com/sensors. Yog xav paub ntxiv txog IEEE 1451.4 TEDS ntse sensors, xa mus rau ni.com/tws. Yog tias koj siv SignalExpress, xa mus rau Siv NI-DAQmx nrog Koj Daim Ntawv Thov Software.

Khiav Test Panels
Siv lub MAX xeem vaj huam sib luag raws li hauv qab no.

Hauv MAX, nthuav Devices thiab Interfaces lossis Devices thiab Interfaces»Network Devices.
Right-click the device to test, and select Test Panels to open a test panel for the xaiv ntaus ntawv.

Nyem rau ntawm lub tab nyob rau sab saum toj thiab pib sim cov cuab yeej ua haujlwm, lossis Pab rau cov lus qhia ua haujlwm.
Yog tias lub vaj huam sib luag kuaj pom cov lus yuam kev, xa mus rau ni.com/support.

Nyem Kaw kom tawm ntawm lub vaj huam sib luag xeem.

Siv qhov ntsuas NI-DAQmx

NI-DAQmx Channels thiab Tasks
Lub cev channel yog lub davhlau ya nyob twg lossis tus pin uas koj tuaj yeem ntsuas lossis tsim cov teeb liab analog lossis digital. Ib lub channel virtual qhia lub npe rau lub cev channel thiab nws cov chaw, xws li kev sib txuas ntawm lub davhlau ya nyob twg, hom kev ntsuas lossis tiam, thiab cov ntaub ntawv ntsuas. Hauv NI-DAQmx, cov channel virtual yog qhov tseem ceeb rau txhua qhov kev ntsuas.

Ib txoj hauj lwm yog ib los yog ntau dua virtual channel nrog lub sij hawm, triggering, thiab lwm yam khoom. Conceptually, ib txoj hauj lwm sawv cev rau kev ntsuas los yog tiam los ua. Koj tuaj yeem teeb tsa thiab khaws cov ntaub ntawv teeb tsa hauv ib txoj haujlwm thiab siv txoj haujlwm hauv daim ntawv thov. Xa mus rau NI-DAQmx Pab kom tiav cov ntaub ntawv hais txog cov channel thiab cov haujlwm.

Siv DAQ Assistant los teeb tsa cov channel virtual thiab cov haujlwm hauv MAX lossis hauv koj daim ntawv thov software.

Configure ib Task Siv DAQ Assistant los ntawm MAX
Ua kom tiav cov kauj ruam hauv qab no los tsim ib txoj haujlwm siv DAQ Assistant hauv MAX:

Hauv MAX, right-click Data Neighborhood thiab xaiv Tsim Tshiab los qhib DAQ Assistant.
Hauv Tsim Tshiab qhov rai, xaiv NI-DAQmx Task thiab nyem Next.
Xaiv Tau Cov Teeb Meem lossis Tsim Cov Teeb Meem.
Xaiv hom I/O, xws li analog input, thiab ntsuas hom, xws li voltage.
Xaiv lub cev (s) channel siv thiab nyem Next.
Lub npe ua haujlwm thiab nyem Finish.
Configure tus kheej channel nqis. Txhua lub cev channel koj muab rau ib txoj haujlwm tau txais lub npe virtual channel. Txhawm rau hloov kho qhov kev tawm tswv yim lossis lwm qhov chaw, xaiv cov channel. Nyem Paub meej rau cov ntaub ntawv qhia txog lub cev. Configure lub sij hawm thiab triggering rau koj txoj hauj lwm. Nyem Khiav.

Siv NI-DAQmx nrog Koj Daim Ntawv Thov Software
DAQ Assistant yog sib xws nrog version 8.2 lossis tom qab ntawm LabVIEW, version 7.x lossis tom qab ntawm LabWindows™/CVI™ lossis Measurement Studio, lossis nrog version 3 lossis tom qab ntawm SignalExpress.
SignalExpress, ib qho yooj yim-rau-siv configuration-raws li cov cuab yeej rau cov ntaub ntawv logging daim ntaub ntawv, yog nyob rau ntawm Start»Tag nrho cov kev pab cuam»National Instruments»NI SignalExpress los yog (Windows 8) NI Launcher.

Txhawm rau pib nrog kev nrhiav tau cov ntaub ntawv hauv koj daim ntawv thov software, xa mus rau cov lus qhia:

Daim ntawv thov	Tutorial Qhov Chaw
LabVIEW	Mus rau Pab»LabVIEW Pab. Tom ntej no, mus rau Kev Pib Nrog LabVIEW» Pib nrog DAQ» Noj NI-DAQmx Kev Ntsuas hauv LabVIEW.
LabWindows/CVI	Mus rau Pab»Cov ntsiab lus. Tom ntej no, mus rau Siv LabWindows/CVI»Data Acquisition»Kev ntsuas NI-DAQmx hauv LabWindows/CVI.
Kev ntsuas Studio	Mus rau NI Measurement Studio Pab » Pib nrog Kev Ntsuas Studio Chav Tsev Qiv Tsev » Kev Ntsuas Studio Walkthroughs » Taug kev: Tsim Kev Ntsuas Studio NI-DAQmx Daim Ntawv Thov.
SignalExpress	Mus rau Pab» Noj NI-DAQmx Kev Ntsuas hauv SignalExpress.

Examples
NI-DAQmx suav nrog example cov kev pab cuam los pab koj pib tsim ib daim ntawv thov. Hloov kho example code thiab khaws cia rau hauv daim ntawv thov, lossis siv examples los tsim ib daim ntawv thov tshiab lossis ntxiv example code rau ib daim ntawv thov uas twb muaj lawm.
Mus nrhiav LabVIEW, LabWindows/CVI, Measurement Studio, Visual Basic, thiab ANSI C examples, mus ni.com/info thiab nkag mus rau Info Code daqmxexp. Rau ntxiv examples, refer to ib zone.ni.com.
Yuav khiav examples tsis muaj kho vajtse ntsia, siv NI-DAQmx simulated ntaus ntawv. Hauv MAX, xaiv Pab » Pab Cov Ntsiab Lus» NI-DAQmx» MAX Pab rau NI-DAQmx thiab nrhiav cov khoom siv simulated.

Kev daws teeb meem

Yog tias koj muaj teeb meem txhim kho koj cov software, mus rau ni.com/support/daqmx. Rau kev daws teeb meem kho vajtse, mus rau ni.com/support thiab sau koj lub npe ntaus ntawv, lossis mus rau ib. com/kb.
Yog tias koj xav tau rov qab koj National Instruments hardware rau kev kho lossis ntsuas cov cuab yeej, xa mus rau ni.com/info thiab nkag mus rau Info Code rdsenn los pib qhov Kev Tso Cai Xa Khoom Rov Qab (RMA) txheej txheem.
Mus rau ni.com/info thiab nkag mus rau rddq8x rau cov npe ua tiav ntawm NI-DAQmx cov ntaub ntawv thiab lawv qhov chaw nyob.

Xav paub ntxiv
Tom qab koj nruab NI-DAQmx, NI-DAQmx cov ntaub ntawv software tuaj yeem nkag tau los ntawm Pib» Txhua Qhov Kev Pabcuam»National Instruments»NI-DAQ»NI-DAQmx cov ntaub ntawv npe lossis (Windows 8) NI Launcher. Cov peev txheej ntxiv muaj nyob online ntawm ni.com/gettingstarted.
Koj tuaj yeem nkag mus rau cov ntaub ntawv hauv online los ntawm txoj cai-nias koj lub cuab yeej hauv MAX thiab xaiv Pab » Cov Ntaub Ntawv Hauv Online. Lub qhov rais browser qhib rau ni.com/manuals nrog cov txiaj ntsig ntawm kev tshawb nrhiav cov ntaub ntawv muaj feem cuam tshuam nrog cov cuab yeej siv. Yog koj tsis muaj Web nkag mus, cov ntaub ntawv rau cov cuab yeej txhawb nqa tau suav nrog hauv NI-DAQmx media.

Kev Pabcuam Thoob Ntiaj Teb
Yog xav paub ntxiv txog kev txhawb nqa, xa mus rau ni.com/support rau kev nkag mus rau txhua yam los ntawm kev daws teeb meem thiab kev txhim kho daim ntawv thov kev pab tus kheej rau email thiab xov tooj kev pab los ntawm NI Application

Cov kws ua choj. Mus saib ni.com/zone rau cov khoom qhia qhia, example kod, webcasts, thiab video.
Mus saib ni.com/services ib rau NI Factory Installation Services, kho, txuas ntxiv warranty, calibration, thiab lwm yam kev pab cuam.

Txhawm rau kom paub meej qhov ntsuas qhov tseeb, NI lub Hoobkas ntsuas tag nrho cov cuab yeej siv tau thiab teeb tsa daim ntawv pov thawj Basic Calibration, uas koj tuaj yeem tau txais online ntawm ni.com/calibration.
Mus saib ni.com/trainin ibg rau kev cob qhia tus kheej, eLearning virtual chav kawm, sib tham sib CDs, ntaub ntawv pov thawj cov ntaub ntawv pov thawj, lossis rau npe rau tus kws qhia-coj, kev qhia tes ntawm cov chaw thoob ntiaj teb.

Xa mus rau NI Trademarks thiab Logo Guidelines ntawm ni.com/trademarks Yog xav paub ntxiv txog National Instruments trademarks. Lwm cov khoom lag luam thiab cov npe tuam txhab tau hais hauv no yog cov cim lag luam lossis cov npe lag luam ntawm lawv cov tuam txhab. Rau patents npog National Instruments
cov khoom / thev naus laus zis, xa mus rau qhov chaw tsim nyog: Pab» Patents hauv koj cov software, patents.txt file ntawm koj cov xov xwm, lossis National Instruments Patent Notice ntawm ni.com/patents. Koj tuaj yeem nrhiav cov ntaub ntawv hais txog daim ntawv tso cai siv kawg (EULAs) thiab cov ntawv ceeb toom kev cai lij choj thib peb hauv readme file rau koj cov khoom NI. Xa mus rau Export Cov Ntaub Ntawv Ua Raws Cai ntawm
ni.com/legal/export-complince rau National Instruments txoj cai tswjfwm kev lag luam thoob ntiaj teb thiab yuav ua li cas thiaj li tau txais HTS cov lej cuam tshuam, ECCNs, thiab lwm yam ntaub ntawv ntshuam / xa tawm.

Cov ntaub ntawv / Cov ntaub ntawv

NATIONAL INSTRUMENTS Data Acquisition QAQ Device and Software [ua pdf] Cov neeg siv phau ntawv qhia
USB-6216, Data Acquisition QAQ Device and Software, Data Acquisition, QAQ Device thiab Software

Cov ntaub ntawv

Cov neeg siv phau ntawv