Mircom LOGOMircom LOGO 2Phau ntawv qhia

Cov ntsiab lus zais
1 Txuas OpenGN rau PRO-2000
2 Cov ntaub ntawv / Cov ntaub ntawv
2.1 Cov ntaub ntawv
3 Related Posts

Txuas OpenGN rau PRO-2000

Mircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 1 Nco ntsoov: Ua ntej koj pib, ua raws li cov lus qhia hauv LT-1113 "OpenGN Tus Thawj Coj Cov Lus Qhia" (muaj nyob rau ntawm http://www.mircom.com) txhawm rau nruab OpenGN thiab teeb tsa lub computer khiav OpenGN thiab OpenGN Gateway.
Mircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 2 Nco tseg: Cov lus qhia no yuav tsum ua kom tiav los ntawm ib tus neeg paub txog kev teeb tsa aPRO-2000. Saib LT-1012, PRO-2000 Installation and Operation Manual (muaj nyob rau ntawm http://www.mircom.com).
Koj xav tau:

  • ARW-VESP211 Advantech Serial rau Ethernet Converter
  • Advantech software CD
  • RJ-11 rau DB9 adapter (ib feem ntawm cov khoom siv PRO-2000)
  • RJ-11 cable (ib feem ntawm cov khoom siv PRO-2000)
  • Ethernet cable (ntau tshaj 300')
  • OpenGN version 3.2 lossis tom qab ntawd
  • OpenGN Gateway version 3.2 lossis tom qab ntawd
  • OpenGN daim ntawv tso cai yuam sij
  • PRO-2000 nrog firmware 5.14 lossis tom qab ntawd
  • PRO-2000_XML_Generator software
  • FIRE-SCOPE PRO-2000 System Configurator

1.1 Tshajview
Txhawm rau txuas OpenGN rau PRO-2000, koj yuav tsum:

  1. Configure PRO-2000
  2. Tsim VDU File
  3. Konvertiere VDU in LWS File rau XML
  4. Txuas PRO-2000 rau OpenGN Gateway nrog ARW-VESP211
  5. Teem lub PRO-2000 los sib txuas lus siv Modbus
  6. Configure ARW-VESP211
  7. Teeb tsa VCOM Driver
  8. Ntshuam XML file hauv OpenGN
  9. Configure OpenGN Gateway

Ua raws li cov lus qhia hauv qab no kom ua tiav cov kauj ruam no.
1.2 Configure PRO-2000

  1. Txuas lub PRO-2000 rau lub computer thiab teeb tsa nrog PRO-2000 System Configurator.
  2. Hauv Network tab ntawm Configurator, muab cov ntaub ntawv hauv qab no.
    Baud Rate 9600
    PC/PLC Xaiv qhov kev xaiv no.
    Deest. Chaw nyob Txhua tus lej ntawm 11 thiab 255.

    Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 1Nco tseg: Ua ib daim ntawv ntawm Dest. Chaw nyob. Koj yuav xav tau nws nyob rau theem tom ntej.

  3. Hauv General tab ntawm Configurator, nyem Tsim Modbus Chaw Nyob.
  4. Ua ib daim ntawv ntawm tus lej ntawm MODBUS qhov siab tshaj plaws sau npe.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 2
  5. Nyem OK.
  6. Sau tus lej los ntawm kauj ruam 4 hauv MODBUS Max Reg teb.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 3
  7. Xa cov kev teeb tsa file mus rau lub vaj huam sib luag.

1.3 Tsim cov VDU File

  1. Hauv PRO-2000 Configurator, xaiv Cov Cuab Yeej, tom qab ntawd xaiv Tsim VDU Generic File. Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 4 The VDU file tau txais kev cawmdim nyob rau hauv tib phau ntawv raws li koj lwm configuration files. Nws muaj npe VDU_gen.csv.

1.4 Hloov ua lwm yam VDU File rau XML

  1. Copy the VDU file rau hauv tib lub nplaub tshev raws li PRO-2000_XML_Generator software.
  2. Right-click lub PRO-2000_XML_Generator icon, thiab tom qab ntawd nyem Khiav raws li Tus Thawj Coj.
  3. Hauv PRO-2000 XML Generator qhov rai uas tshwm, muab cov ntaub ntawv hauv qab no:
    File Lub npe Sau lub npe rau XML file, lossis nias Enter siv lub npe txoj haujlwm uas tau teeb tsa hauv PRO-2000 Configurator.
    Yog tias file twb muaj lawm, PRO-2000 XML Generator ntxiv hnub thiab sijhawm rau qhov tshiab file npe.
    Txoj Haujlwm ID Sau tus lej ID Txoj Haujlwm lossis nias Enter kom tsim tau ib qho.
    Yog tias koj tab tom tsim ib qho tshiab ntawm txoj haujlwm uas twb muaj lawm, siv tib Txoj Haujlwm ID Number.
    Txoj Haujlwm Version Sau tus lej Txoj Haujlwm lossis nias Enter los tsim ib qho kev txiav txim.
    Txoj hauj lwm npe Sau Lub Npe Txoj Haujlwm lossis nias Enter siv lub npe txoj haujlwm uas tau teeb tsa hauv PRO-2000 Configurator.
    Modbus Dest. Chaw nyob Sau tus lej uas koj tau nkag rau Dest. Chaw nyob hauv Network tab ntawm PRO-2000 Configurator (nqe 1.2 ntawm nplooj 2).
    Nco tseg: Khaws cov ntaub ntawv ntawm tus lej no. Koj yuav xav tau nws nyob rau theem tom ntej.
  4. Tos kom tiav cov txheej txheem.
  5. Thaum cov txheej txheem tiav, nias ib qho tseem ceeb mus txuas ntxiv.
  6. Qhib lub file Job_Details.csv thiab ua ib daim ntawv teev cov lej hauv JobID thiab JobVersion kab. Koj yuav xav tau cov no hauv kauj ruam tom ntej.

Nco tseg: Txhua zaus koj khiav PRO-2000 XML Generator, nws tsim XML tshiab file thiab hloov kho Job_Details.csv file nrog lub npe XML file, Txoj Haujlwm ID Naj Npawb, thiab Txoj Haujlwm Version cuam tshuam nrog XML ntawd file.
1.5 Txuas PRO-2000 rau OpenGN Gateway nrog ARW-VESP211

  1. Txuas RJ-11 rau DB9 adapter rau COM chaw nres nkoj ntawm ARW-VESP211.
  2. Txuas RJ-11 cable rau tib qhov chaw nres nkoj ntawm PRO-2000 uas koj siv rau kev teeb tsa PRO-2000.
  3. Txuas lwm kawg ntawm RJ-11 cable rau RJ-11 rau DB9 adapter.
  4. Siv Ethernet cable los txuas LAN chaw nres nkoj ntawm ARW-VESP211 rau lub khoos phis tawj uas khiav ntawm OpenGN Gateway.
  5. Txuas lub ARW-VESP211 rau lub hwj chim.

Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 5

1.6 Teem lub PRO-2000 los sib txuas lus siv Modbus
Ntawm PRO-2000 vaj huam sib luag uas txuas nrog ARW-VESP211, teeb tsa lub hloov pauv SW1 rau 3.
1.7 Configure ARW-VESP211
1.7.1 Kho lub OpenGN Gateway Computer los txuas rau ARW-VESP211
Txhawm rau pib txuas mus rau ARW-VESP211, OpenGN Gateway computer yuav tsum muaj qhov chaw nyob IP tshwj xeeb.

  1. Nyob rau hauv lub computer uas lub OpenGN Gateway yog nyob rau, nyem Start, ces nyem qhov chaw.
  2. Nyem Network thiab Internet.
  3. Nyem Network thiab Sharing Center.
  4. Nyem qhov Ethernet kev twb kev txuas.
    Lub qhov rais Ethernet Status tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 6
  5. Nyem Properties.
    Lub qhov rais Ethernet Properties tshwm. Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 7
  6. Ob-nias Internet raws tu qauv Version 4 (TCP/IPv4).
    Lub Internet Protocol Version 4 (TCP/IPv4) Properties window tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 8
  7. Nyem Siv tus IP chaw nyob hauv qab no.
  8. Ntaus cov chaw nyob hauv qab no:
    • IP chaw nyob: 169.254.102.40
    • Subnet daim npog qhov ncauj: 255.255.0.0
  9. Nyem OK.

1.7.2 Nruab Vlinx Serial Server Manager

  1. Ntxig Advantech CD rau hauv OpenGN Gateway computer.
    Vlinx Serial Server Manager Installation Wizard pib tau txais.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 9
  2. Ua raws li cov lus qhia ntawm qhov screen rau nruab Vlinx Serial Server Manager.

1.7.3 Configure ARW-VESP211

  1. Ntawm OpenGN Gateway computer, qhib Serial Server Manager: nyem Pib> B&B Electronics> Vlinx> Vlinx Serial Server Manager.
    Vlinx Serial Server Manager tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 10
  2. Nyem Kuv tsis paub tus IP chaw nyob ntawm lub cuab yeej.
  3. Nyem Txuas.
    Vlinx Serial Server Manager saib rau cov khoom siv.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 11Lub Login screen rau ARW-VESP211 ntaus ntawv tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 12
  4. Sau tus ID nkag mus password, tom qab ntawd nyem Nkag mus. Los ntawm lub neej ntawd, tus password tsis muaj dab tsi.
    Lub General screen tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 13
  5. Sau lub npe uas piav qhia txog lub vaj huam sib luag uas lub cuab yeej txuas nrog, piv txwv li PRO-2000.
  6. Xaiv Kuv xav hloov tus password, ces nkag mus rau tus password tshiab.
  7. Nyem Txuag.
    Mircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 2 Nco tseg: Khaws ib daim ntawv teev tus password. Koj yuav xav tau nws nyob rau theem tom ntej.
  8. Nyem Network ntawm sab laug sidebar.
    Lub Network screen tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 14
  9. Sau cov ntaub ntawv hauv qab no:
    IP chaw nyob Subnet Mask Default Gateway Nrog koj tus thawj tswj hwm lub network rau kev pab. Tus IP chaw nyob yuav tsum nyob rau tib yam li tus IP chaw nyob ntawm lub computer uas khiav OpenGN Gateway. Lub rooj vag thiab lub qhov ncauj qhov ntswg yuav tsum zoo ib yam li lawv nyob ntawm OpenGN Gateway computer.
    Rau example, yog tias OpenGN Gateway lub computer tus IP chaw nyob thiab lub qhov ncauj qhov ntswg subnet yog 192.168.1.10 thiab 255.255.255.0, ces koj tuaj yeem nkag mus rau 192.168.1.11 thiab 255.255.255.0 raws li ARW-VESP211 lub npog ntsej muag IP thiab sub.

    Mircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 2 Nco tseg: Khaws ib daim ntawv teev npe IP. Koj yuav xav tau nws nyob rau theem tom ntej.
    Txhawm rau kom muaj kev sib txuas tas li rau OpenGN, koj yuav tsum muab qhov chaw nyob IP zoo li qub rau ARW-VESP211.

  10. Nyem Next.
    Qhov chaw nres nkoj 1 Chaw qhov screen tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 15
  11. Xaiv VCOM hom.
  12. Nyem Next.
    Qhov chaw nres nkoj 1 Serial screen tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 16
  13. Xaiv RS-232 hauv hom ntawv qhia zaub mov.
  14. Nyem Next.
  15. Nyob rau hauv Txuag, nyem lub pob Txuag thiab tos rau lub Login screen tshwm.

1.7.4 Configure OpenGN Gateway Computer

  • Hloov cov chaw IP rau OpenGN Gateway computer rau lawv cov nqi dhau los. Saib tshooj 1.7.1 ntawm nplooj ntawv 5 rau cov lus qhia txog kev hloov pauv IP chaw.

Yog tias koj xav tau kev pab, hu rau koj tus thawj tswj hwm lub network.
Yog tias koj txuas lub khoos phis tawj OpenGN Gateway mus rau PRO-2000 vaj huam sib luag ncaj qha hla Ethernet, nkag mus rau qhov chaw nyob IP uas txawv dua li IP chaw nyob ntawm PRO-2000
vaj huam sib luag. Nkag mus rau tib lub ntsej muag subnet raws li lub ntsej muag subnet ntawm lub vaj huam sib luag.

1.8 Teeb tsa VCOM Tsav Tsheb

  1. Ntawm lub Login screen, nyem Ntxiv VCOM.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 17
  2. Lub qhov rais Ntxiv VCOM tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 18
  3. Sau cov ntaub ntawv hauv qab no:
    Kuv xav siv serial server: Xaiv lub configured ARW-VESP211 Serial Server.
    thiab daim ntawv qhia serial chaw nres nkoj: Xaiv 1.
    mus rau lub computer hauv zos xws li: Xaiv tus lej COM chaw nres nkoj.

    Nco tseg: Khaws ib daim ntawv teev npe ntawm COM chaw nres nkoj. Koj yuav xav tau nws nyob rau theem tom ntej.

  4. Nyem Ntxiv.
    Ib tsab xov xwm ua tiav yuav tsum tshwm sim.
  5. Yog tias muaj qhov yuam kev
    a. Xyuas kom tseeb tias ARW-VESP211 txuas nrog Ethernet cable.
    b. Sim tus lej COM chaw nres nkoj sib txawv thaum ntxiv VCOM.

1.9 Import XML file hauv OpenGN

  1. Hloov XML file koj tau tsim nyob rau hauv ntu 1.4 ntawm nplooj ntawv 4 rau lub computer uas OpenGN tab tom khiav.
  2. Ntxig rau OpenGN CodeMeter daim ntawv tso cai yuam sij hauv lub computer.
  3. Ob npaug nyem rau ntawm Open Graphic Navigator icon.
    Lub qhov rais Login tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 19
  4. Xaiv tus neeg siv los ntawm Login menu.
  5. Ntaus tus password.
  6. Nyem OK.
    Lub qhov rais OpenGN Main Display tshwm.
  7. Nyem qhov Config khawm los ntawm Main Display window.
  8. Nyem Yog kom paub meej tias koj xav nkag mus rau ntu kev teeb tsa.
    Lub qhov rais Configuration tshwm.
  9. Nyem lub pob Settings nyob rau sab xis sab xis ntawm lub qhov rais Configuration.
    Lub vaj huam sib luag Settings qhov rais tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 20
  10. Nyem Xauj hauv seem Vaj Huam Sib Luag Configuration, thiab tom qab ntawd mus rau XML file.
  11. Xaiv Auto-associate default icons yog tias koj xav koom nrog cov khoom icons nrog cov duab uas twb muaj lawm system icon.
    Mircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 2 Nco tseg: Yog hais tias koj importing ib tug tshiab version ntawm ib tug yav tas los importing txoj hauj lwm file, uncheck Auto-associate default icons. Txwv tsis pub, txhua qhov kev cai icon teeb tsa koj tau ua yuav raug tshem tawm.
  12. Nyem Ntshuam XML.
  13. Nyem Yog.
  14. Pib dua OpenGN.

1.10 Configure OpenGN Gateway

  1. Muab ob npaug rau-nias lub Open Graphic Navigator Gateway icon.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 21
  2. Nyem qhov + khawmMircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 3.
    Lub qhov rais Adapter Configuration tshwm.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 22
  3. Sau cov ntaub ntawv hauv qab no.
    Hom PRO-2000 Series
    Kev sib txuas Txoj hlua Cov hlua txuas muaj 8 daim ntaub ntawv sib cais los ntawm cov nyuv. Hloov txoj hlua no raws li cov ntaub ntawv hauv qab no:
    COM1:<Node_Number>:<JobIDHere>:<Job_Version>:21,35000:100:20:30000

    A: B : C: D : E, F : G : H: I
    • A: Tus naj npawb virtual COM chaw nres nkoj los ntawm VCOM tus tsav tsheb (tau muab tso rau hauv ntu 1.8 ntawm nplooj 11).
    • B: Cov Deest. Chaw nyob los ntawm Network tab ntawm PRO-2000 Configurator (tau muab tso rau hauv ntu 1.2 ntawm nplooj 2).
    • C: Tus Naj Npawb Ua Haujlwm (xa mus rau ntu 1.4 ntawm nplooj ntawv 4).
    • D: Txoj Haujlwm Version (xa mus rau ntu 1.4 ntawm nplooj ntawv 4).
    • E: Pib Modbus chaw nyob. Cia li yog.
    • F: Modbus tus lej sau npe siab tshaj plaws los ntawm General tab ntawm PRO-2000 Configurator (tau muab tso rau hauv ntu 1.2 ntawm nplooj 2).
    Nco tseg: Cov khoom E thiab F (qhov pib thiab xaus Modbus chaw nyob) yuav tsum tau muab cais los ntawm tus lej cim.
    • G: Tus naj npawb ntawm qhov chaw nyob xaiv ib qho nyeem. Tawm ntawm 100.
    • H: ncua ntawm cov lus nyeem (hauv milliseconds). Tawm ntawm 20.
    • I: Ncua sij hawm tos thaum Tsis Muaj Lus Teb tau txais (hauv milliseconds). Tawm ntawm 3000.
  4. Nyem lub khawm ntsuabMircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 3 ib sab Destination, thiab tom qab ntawd muab cov ntaub ntawv hauv qab no:
    Qhov chaw IP Tus IP chaw nyob ntawm OpenGN computer. Yog tias OpenGN Gateway thiab OpenGN nyob rau tib lub computer, siv 127.0.0.1.
    Chaw nres nkoj 1209
    Khw muag khoom thiab xa mus rau cov xwm txheej Khaws cia rau yav tom ntej siv.
  5. Nyem OK.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 23
  6. Nyem Pib Pib Pib Adapter Thaum OpenGN Gateway Pib yog tias koj xav kom OpenGN Gateway txuas nrog cov chaw no thaum nws pib.
  7. Nyem Txuag.
  8. Nyem Kaw.
  9. Hauv Windows taskbar, right-click lub OpenGN Gateway icon, thiab tom qab ntawd xaiv Kaw qhov rai.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 24
  10. Muab ob npaug rau-nias lub Open Graphic Navigator Gateway icon.
  11. Xaiv lub adapter koj tsim, thiab tom qab ntawd nyem lub cim xub ntsuab:Mircom MGC CONFIG KIT4 Secutron Hluav Taws Xob Tswb Tswj Vaj Huam Sib Luag thiab Lub Suab Evacuation Systems - ICON 4
    Thaum OpenGN txuas nrog, lub adapter hauv Adapter List yog ntsuab.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 25
  12. Ob-nias lub adapter rau view nws cov ntsiab lus.
    Thaum OpenGN txuas nrog, lub cim ntawm ib sab ntawm Kev Sib Txuas Txoj hlua tig los ntawm liab mus rau ntsuab, thiab lub Destination hloov ntsuab.Mircom LT 1113 OpenGN Graphic Command and Control Station - Daim duab 26
  13. Pib OpenGN.
Canada
25 Txoj kev sib hloov
Vaughan, ON L4K 5W3
Tel: 888-660-4655 Ib
Fax: 888-660-4113 Ib		 Teb chaws USA
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Tel: 888-660-4655 Ib

Mircom LOGO 2firealarmresources.com
LT-6620 Rev 5
© MGC 2022
Luam tawm hauv Canada
Kev hloov pauv yam tsis tau ceeb toom ua ntej
http://www.mircomgroup.com/opengn

Cov ntaub ntawv / Cov ntaub ntawv

Mircom LT-1113 OpenGN Graphic Command and Control Station [ua pdf] Phau ntawv qhia
LT-1113, OpenGN Graphic Command and Control Station, LT-1113 OpenGN Graphic Command thiab Control Station

Cov ntaub ntawv

Related Posts

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *