Mile pom SCT01 Sensor Configuration Tool Tus neeg siv phau ntawv

• Kev Tiv Thaiv Kev Nyab Xeeb
  Mile pom yuav tsis muaj lub luag haujlwm rau kev poob lossis kev puas tsuaj ua rau pem hauv ntej raws li cov lus qhia ntawm phau ntawv qhia kev ua haujlwm no.
• Cov cuab yeej yuav tsum tsis txhob disassembled los yog hloov kho nyob rau hauv txhua txoj kev.
• Tsis txhob tshem lub roj teeb ntawm lub cuab yeej.
• Tsis txhob tso lub cuab yeej thiab nws cov khoom siv nyob qhov twg qhov kub lossis av noo hauv qab / saum toj ntawm qhov kev ua haujlwm.
• Tsis txhob tso lub cuab yeej ze rau cov khoom nrog cov nplaim liab qab, txwv tsis pub nws yuav tawg.
• Cov cuab yeej yuav tsum tsis txhob raug te, shocks lossis cuam tshuam.

Kev kho keeb kwm

Hnub tim	Cov ntawv Doc	Kev piav qhia
Peb Hlis 15, 2024	V 1.0	V 1.0 Thawj version

Khoom Taw Qhia

Tshajview

Milesight Sensor Configuration Tool yog ib qho khoom siv portable configuration rau NFCconfigurations ntawm Milesight sensors. Raws li tus kws tshaj lij NFC nyeem ntawv thiab sau cov cuab yeej, SCT01features lub vaj huam sib luag ncaj nraim nrog rau thaj tsam NFC loj thiab cov nyees khawm tau hais meej meej, ua rau cov neeg siv tsis muaj keeb kwm yav dhau los ua haujlwm rau kev teeb tsa zoo ntawm qhov chaw.
Nrog lub roj teeb built-in thiab Type-C chaw nres nkoj, nws tuaj yeem ua haujlwm rau 6 teev thiab txhawb nqa lub txhab nyiaj them nyiaj viaaType-C, tso cai rau cov neeg siv tau yooj yim nqa lub cuab yeej txhua qhov chaw.

Nta

• Tau tshaj txhua lub Mile pom cov khoom siv nrog NFC feature
• Yooj yim nyeem thiab sau rau cov khoom siv nrog thaj tsam loj NFC
• Equis nrog ib tug buzzer thiab nplua nuj indicators, As paub cov txheej xwm thiab configuration tshwm sim
• Lub vaj huam sib luag ua haujlwm yooj yim nrog cov nyees khawm meej tsim los rau kev teeb tsa yooj yim txawm rau cov neeg siv tsis siv neeg
• Built-in Bluetooth rau cov cuab yeej yooj yim configuration thiab template ntshuam, cav export, thiab lwm yam.
• Txhawb kom khaws txog li 50 qhov kev teeb tsa files thiab tau hloov kho qhov teeb tsafilesto txawv qauv thaum muab cov configurations
• Txhawb kom khaws 1 firmware file hloov kho cov cuab yeej hauv ntau
• Nrog lub roj teeb lithium ua haujlwm ua haujlwm rau 6 teev
• Txhawb nqa cov ntaub ntawv thaub qab thiab them nyiaj los ntawm USB hom-C chaw nres nkoj

Hardware Taw Qhia

Daim ntawv teev npe

1 × SCT01 Ntaus

1 × Hom-C Cable

1 × Phau ntawv ceev

1 × Warranty Card

Yog tias ib qho ntawm cov khoom saum toj no ploj lawm lossis puas, thov hu rau koj tus neeg muag khoom.

Kho vajtse dhauview

Qhov Loj (mm)

LED Qhov taw qhia

LED	Qhov taw qhia	Kev piav qhia	Qhov taw qhia xwm txheej
Hwj chim	Roj teeb xwm txheej	Roj teeb theem:> 70%	3 qhov taw qhia teeb rau 3s tom qab Power On

		Roj teeb theem: 30 ~ 70%	2 qhov taw qhia teeb rau 3s tom qab Power On
		Roj teeb theem: 20 ~ 30%	1 qhov taw qhia teeb rau 3s tom qab Power On
		Roj teeb theem: 0 ~ 20%	3 qhov taw qhia ntsais mus ib txhis 5s
	Them nqi	Them los ntawm Type-C chaw nres nkoj	1 qhov taw qhia blinks
		Xaus them	Tawm
Muaj nuj nqi	Sensor On/Sensor Off/Configure/Upgrade/Auto	Nias lub pob kom xaiv hom kev teeb tsa.	Tawm → On
	Wi-Fi / BLE	Nias lub pob kom tso cai rau kev sib txuas Bluetooth.	Blinks ≤ 40s
		Txuas ntaus ntawv mus rau smartphone ua tiav.	Blinks → Static On
Configure tin Status	Nyeem ntawv	Nias START khawm	Ntsais muag
		Paub txog NFC thaj tsam ntawm sensor thiab pib sau ntawv	Blinks → Static On
	Kev vam meej	Sau tiav	Lub teeb ntawm ≤ 5s
	Ua tsis tiav	Sau tsis tau	Lub teeb ntawm ≤ 30s

Nco tseg: Cov cuab yeej yuav mus rau hom pw tsaug zog thiab teeb tawm txhua qhov ntsuas yog tias tsis muaj kev ua haujlwm hauv 30s thiab USB tsis txuas nrog ib qho khoom siv lossis lub zog. Cov neeg siv tuaj yeem nias ib qho uttontoexit hom pw tsaug zog.

Cov Lus Qhia Ua Haujlwm

Lub hwj chim Sensor On / Off

Muaj Cov Qauv: NFC txhawb nqa thiab txhawb nqa lub zog rau / tawm ntawm Tool Box App. Examples:
AM300 series, EM300 series, EM500 series, thiab lwm yam.

1. Qhib cov cuab yeej sensor configuration.
   
2. Nias SENSOR ON los yog SENSOR OFF khawm.
   
3. Nyem Pib khawm thiab xyuas kom meej READING qhov taw qhia blinks, txuas NFC cheeb tsam ntawm SCT01device rau lub hom phiaj sensor kom khiav lub hwj chim rau / tawm haujlwm. Thaum qhov kev ua tiav lossis tsis ua tiav qhov taw qhia teeb thiab lub suab nrov nrov, kev ua haujlwm tiav.
   

Nco tseg:

1. Thaum READING qhov taw qhia hloov pauv los ntawm blinks mus rau qhov zoo li qub, nws txhais tau tias SCT01 tab tom sau cov cuab yeej thiab thov khaws ob qho tib si kom tsis txhob sau ntawv tsis ua haujlwm.
2. Lub neej ntawd configuration password rau Mile pom sensor yog 123456. Yog hais tias lub sensor siv txawv lo lus zais, thov txuas Tool Box App rau SCT01 los sau lub sensor configurationpassword ua ntej ua ib qho kev khiav hauj lwm.

Sensor Configuration

Ntxiv Templates rau SCT01 Ntaus

1. Rub tawm thiab nruab Milesight ToolBox App los ntawm Google Play lossis App Store.
2. Qhib Bluetooth thiab qhov chaw nyob ntawm lub smartphone, tom qab ntawd qhib Milesight ToolBox App.
3. Nias lub pob Wi-Fi/BLE ntawm SCT01 ntaus ntawv thiab xyuas kom meej qhov taw qhia blinks.
4. Xaiv hom kev nyeem ntawv ntawm ToolBox App li Bluetooth los luam theej duab cov khoom siv thiab xaiv lub hom phiaj ntaus ntawv txuas. Lub npe Bluetooth lub npe yog SCT01-XXXXXX (5th rau 11st ntawm ntaus ntawv SN), lub neej ntawd Bluetooth tus pin code yog 521125 thiab lub default device password yog 123456.
   
   
5. Cov ntaub ntawv yooj yim thiab kev teeb tsa ntawm cov khoom siv yuav raug pom ntawm Tool Box App yog tias nws txuas tau tiav. Tool Box App muab ob txoj hauv kev los cawm cov qauv rau SCT01 li.

Txoj Kev 1:

1. Mus rau nplooj ntawv chaw nyem Tsim khawm los tsim cov qauv tshiab.
2. Xaiv hom kev nyeem ntawv raws li NFC, txuas NFC cheeb tsam ntawm lub xov tooj smartphone rau lub hom phiaj sensor nyeem cov teeb tsa. Nco tseg: Tool Box App kuj txhawb kom nyeem cov teeb tsa ntawm Bluetooth yog tias lub sensor txhawb Bluetooth feature.
   
3. Kho cov configuration ntawm sensor thiab nias Txuag khaws cia ua tus qauv.
   

Txoj Kev 2:

1. Ua ntej txuas rau SCT01 ntaus ntawv, xaiv hom kev nyeem ntawv ntawm ToolBox App li NFC, tom qab ntawd txuas NFC cheeb tsam ntawm lub xov tooj smartphone rau lub hom phiaj sensor nyeem cov teeb tsa. Nco tseg: ToolBox App kuj txhawb kom nyeem cov kev teeb tsa ntawm Bluetooth yog tias lub sensor txhawb nqa Bluetooth.
   
2. Mus rau Chaw nplooj ntawv los teeb tsa cov teeb tsa sensor thiab khaws cov qauv rau ToolBox App.
   
3. Hloov hom kev nyeem ntawv ntawm Tool Box App li Bluetooth, txuas lub Tool Box App rau SCT01device.
4. Mus rau Chaw nplooj ntawv nyem Xaiv khawm xaiv tus qauv tshiab, ces nyem Ntxiv rau daim ntawv teev npe.
   
   
   
   
5. Nyem Sau txuag lub template files rau SCT01 ntaus ntawv.

Nco tseg:

1. Qhov taw qhia Wi-Fi / BLE yuav teeb tawm yog tias lub xov tooj smartphone tsis txuas rau SCT01 ntaus ntawv hauv 40s. Thov nias lub pob ob zaug kom nws ntsais dua.
2. Kev sib txuas Bluetooth yuav raug txiav yog tias tsis muaj cov ntaub ntawv sib cuam tshuam li ntawm 5 feeb.
3. Thaum SCT01 pib sau ntawv rau cov sensors, Bluetooth txuas yuav raug txiav.
4. Cov cuab yeej tuaj yeem txuas rau ib lub xov tooj ntawm Bluetooth nkaus xwb. Rau example, yog tias lub cuab yeej txuas nrog lub xov tooj ntse A ntawm Bluetooth, kev sib txuas yuav raug txiav tawm thaum nws txuas nrog smartphoneB.

Sau Templates rau Sensors

1. Nias CONFIGURE khawm.
   
2. Nyem Pib khawm thiab xyuas kom meej READING qhia blinks, txuas NFC cheeb tsam ntawm SCT01device rau lub hom phiaj sensor los sau cov teeb tsa. Thaum qhov kev ua tiav lossis tsis ua tiav qhov taw qhia teeb thiab lub suab nrov nrov, kev ua haujlwm tiav.
   

Nco tseg:

1. SCT01 ntaus ntawv yuav siv cov qauv rau cov qauv sib txawv.
2. Yog tias SCT01 ntaus ntawv txuag ntau cov qauv ntawm tib tus qauv, nws tsuas yog sau tus qauv uas tau txais kev cawmdim tshiab.
3. Thaum READING qhov taw qhia hloov pauv los ntawm blinks mus rau qhov zoo li qub, nws txhais tau tias SCT01 tab tom sau cov cuab yeej thiab thov khaws ob qho tib si kom tsis txhob sau ntawv tsis ua haujlwm.
4. Lub neej ntawd configuration password rau Milesight sensor yog 123456. Yog hais tias lub sensor siv adifferent lo lus zais, thov txuas ToolBox App rau SCT01 sau lub sensor configurationpassword ua ntej ua ib qho kev khiav hauj lwm.
   

Hloov kho Sensor

Ntxiv firmware rau SCT01 Ntaus

1. Download tau thiab nruab Milesight Tool Box App los ntawm Google Play lossis App Store.
2. Qhib Bluetooth thiab qhov chaw nta ntawm lub smartphone, tom qab ntawd qhib Milesight Tool Box App.
3. Nias lub pob Wi-Fi/BLE ntawm SCT01 ntaus ntawv thiab xyuas kom meej qhov taw qhia blinks.
4. Xaiv hom kev nyeem ntawv ntawm ToolBox App li Bluetooth txhawm rau luam theej duab cov khoom siv thiab xaiv lub hom phiaj ntaus ntawv txuas. Lub npe Bluetooth lub npe yog SCT01-XXXXXX (5th rau 11st ntawm ntaus ntawvSN), lub neej ntawd Bluetooth tus pin code yog 521125 thiab lub default device password yog 123456.
   
   
5. Cov ntaub ntawv yooj yim thiab kev teeb tsa ntawm cov khoom siv yuav raug pom ntawm ToolBox App yog tias nws tau txuas nrog ua tiav. Mus rau qhov chaw nplooj ntawv nyem Upload files khawm xaiv thiab upload firmware ntawm smartphone. Txhua lub cuab yeej SCT01 tsuas tuaj yeem txuag tau ib lub firmware xwb file.
   
6. Nyem Sau kom txuag tau lub firmware rau SCT01 ntaus ntawv.

Nco tseg:

1. Qhov taw qhia Wi-Fi / BLE yuav teeb tawm yog tias lub xov tooj smartphone tsis txuas rau SCT01 ntaus ntawv hauv 40s. Thov nias lub pob ob zaug kom nws ntsais dua.
2. Thaum SCT01 pib sau ntawv rau cov sensors, Bluetooth txuas yuav raug txiav.
3. Kev sib txuas Bluetooth yuav raug txiav yog tias tsis muaj cov ntaub ntawv sib cuam tshuam li ntawm 5 feeb.
4. Cov cuab yeej tuaj yeem txuas rau ib lub xov tooj ntawm Bluetooth nkaus xwb. Rau example, yog tias lub cuab yeej txuas nrog lub xov tooj ntse A ntawm Bluetooth, qhov kev sib txuas yuav raug txiav tawm thaum nws txuas stosmartphoneB B.

Sau Firmware rau Sensors

1. Nias UPGRADE khawm.
2. Nyem Pib khawm thiab xyuas kom meej READING qhia blinks, txuas NFC cheeb tsam ntawm SCT01device rau lub hom phiaj sensor los sau cov firmware. Thaum lub SUCCESS lossis FAILURE qhov taw qhia teeb tsa lub buzzer beeps, kev ua haujlwm tiav.
   

Nco tseg:

1. SCT01 ntaus ntawv yuav siv cov qauv rau cov qauv sib txawv.
2. Thaum READING qhov taw qhia hloov pauv los ntawm blinks mus rau qhov zoo li qub, nws txhais tau tias SCT01 tau hloov kho dua tshiab thiab thov khaws ob qho tib si kom tsis txhob sau ntawv tsis ua haujlwm.
3. Lub neej ntawd configuration password rau Milesight sensor yog 123456. Yog tias lub sensor siv tus password sib txawv, thov txuas ToolBox App rau SCT01 los sau cov sensor configurationpassword ua ntej ua haujlwm.
   

Kev tu

Keeb kwm Log

SCT01 txhawb nqa 1000 cov ntaub ntawv khaws tseg hauv zos thiab xa tawm cov ntaub ntawv ntawm ToolBox App. GotoMaintenance nplooj ntawv ntawm ToolBox App, thiab coj mus rhaub Cov ntaub ntawv keeb kwm kom xa cov ntaub ntawv keeb kwm ntawm kev ua haujlwm.

Txhim kho

1. Download tau firmware los ntawm Milesight website rau koj lub smartphone.
2. Mus rau nplooj ntawv Kho ntawm ToolBox App, thiab coj mus rhaub Upgrade rau upload firmware thiab upgrade the device.

Nco tseg: Kev ua haujlwm ntawm ToolBox tsis txaus siab thaum lub sijhawm hloov kho.

Rov pib dua

Mus rau Kev tu paj kais Rov pib dua rov pib dua SCT01 ntaus ntawv mus rau lub Hoobkas chaw.

Kev daws teeb meem

Yog tias muaj teeb meem kev teeb tsa, thov xa mus rau daim ntawv teev npe hauv qab no txhawm rau daws teeb meem sai. Yog tsis daws tau, thov hu rau Milesight technical support: iot.support@milesight.com.

1. Xyuas kom lub sensor tsis yog lub ntsaws thiab ua si, hom sensors no tsis txhawb SENSOR ON / OFF ua haujlwm.
2. Xyuas kom cov templates khaws tseg hauv SCT01 phim koj cov qauv khoom, kho vajtse version, firmware version thiab LoRaWAN® zaus.
3. Xyuas kom lub firmware phim koj cov qauv khoom thiab kho vajtse version.
4. Xyuas kom tseeb tias NFC qhov chaw ntawm ob lub cuab yeej txuas nrog raug.
5. Thaum READING qhia tau zoo li qub, tsis txhob txav ob qho khoom siv.
6. Xyuas seb tus password configuration password yog tus password qub. Yog tias tsis yog, qhib Sensor Sau Cipher ntawm SCT01 ntaus ntawv los teeb tsa tus password sensor.
7. Xyuas kom SCT01 ntaus ntawv roj teeb qib siab tshaj 20%. Txwv tsis pub, nws yuav ua rau lub configuration tsis ua hauj lwm.

Cov ntaub ntawv / Cov ntaub ntawv

Milesight SCT01 Sensor Configuration Tool [ua pdf] Cov neeg siv phau ntawv qhia SCT01 Sensor Configuration Tool, SCT01, Sensor Configuration Tool, Configuration Tool

Cov ntaub ntawv

• Cov neeg siv phau ntawv