metrix GX-1030 Function-Arbitrary Waveform Generator

Kev nthuav qhia

GX 1030 yog dual-channel muaj nuj nqi / arbitrary waveform generator nrog specifications txog li 30 MHz siab tshaj bandwidth, 150 MSa / ssampling tus nqi thiab 14-ntsis ntsug kev daws teeb meem.
Cov cuab yeej cuab tam EasyPulse pab daws qhov tsis muaj zog uas muaj nyob hauv DDS cov tshuab hluav taws xob ib txwm siv thaum tsim cov mem tes waveforms, thiab lub tshuab hluav taws xob tshwj xeeb square yoj muaj peev xwm tsim cov square waveforms txog li 30 MHz zaus thiab qis jitter.
Nrog cov advantages, GX 1030 tuaj yeem muab cov neeg siv nrog ntau yam kev ntseeg siab thiab qis-jitter teeb liab thiab tuaj yeem ua tau raws li qhov yuav tsum tau ua ntawm cov ntawv thov nyuaj thiab dav.

TSEEM CEEB

• Dual-channel, nrog bandwidth mus txog 30 MHz thiab amplitude mus txog 20 Vpp
• 150 MSA/ssampling tus nqi, 14-ntsis ntsug kev daws teeb meem, thiab 16 kpts waveform ntev
• Lub tswv yim yooj yim Pulse thev naus laus zis, muaj peev xwm ua kom qis qis qis
• Pulse waveforms coj ntau yam thiab tsis tshua muaj siab precision hauv pulse dav thiab nce / caij nplooj zeeg hloov
• Tshwj xeeb Circuit Court rau Square nthwv dej, uas tuaj yeem tsim Square nthwv dej nrog zaus mus txog 60 MHz thiab jitter tsawg dua 300 ps + 0.05 ppm ntawm lub sijhawm
• Ntau hom analog thiab digital modulation: AM, DSB-AM, FM, PM, FSK, ASK, PSK thiab PWM
• Sweep thiab tawg ua haujlwm
• Harmonic waveforms tsim muaj nuj nqi
• Waveforms sib txuas ua haujlwm
• High precision Frequency Counter
• 196 hom kev ua haujlwm tsis txaus ntseeg
• Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
• LCD 4.3" zaub 480X272 ntsiab lus

CEEB TOOM SIV

POWER INPUT VOLTAGE
Lub twj tso kua mis muaj ib tug universal fais fab mov uas txais ib tug mains voltage thiab zaus ntawm:

• 100 - 240 V (± 10%), 50 - 60 Hz (± 5%)
• 100-127V, 45-440 Hz

Ua ntej txuas mus rau lub qhov hluav taws xob los yog lub zog hluav taws xob, xyuas kom meej tias lub ON / OFF hloov mus rau OFF thiab xyuas kom meej tias cov hlua hluav taws xob thiab cov hlua txuas ntxiv tau sib xws nrog cov vol.tage / tam sim no ntau yam thiab hais tias lub peev xwm Circuit Court yog txaus. Thaum cov tshev ua tiav, txuas lub cable kom ruaj khov.
Lub mains fais fab qaum nyob rau hauv lub pob muaj ntawv pov thawj rau siv nrog rau qhov ntsuas no. Txhawm rau hloov lossis ntxiv cov kab txuas ntxiv, xyuas kom meej tias nws ua tau raws li qhov xav tau ntawm lub zog ntawm qhov ntsuas no. Ib qho kev siv cov cables tsis tsim nyog lossis txaus ntshai yuav ua rau tsis muaj qhov lav.

KEV PAB CUAM

Xyuas kom paub tseeb tias tag nrho cov khoom koj xaj tau raug muab. Muab tso rau hauv ib lub thawv ntawv cardboard nrog:

• 1 Daim ntawv qhia pib sai
• 1 tus neeg siv phau ntawv hauv pdf ntawm webqhov chaw
• 1 PC software SX-GENE rau webqhov chaw
• 1 daim ntawv kev nyab xeeb ntau yam
• 1 daim ntawv pov thawj ua raws
• Ib txoj hlua fais fab uas haum rau cov qauv 2p + T
• 1 USB cable.

Rau accessories thiab spares, mus saib peb web qhov chaw: www.chauvin-arnoux.com

HANDLE ADJUSTMENT
Txhawm rau kho qhov chaw tuav ntawm GX 1030, thov tuav tus tuav ntawm ob sab thiab rub tawm sab nraud. Tom qab ntawd, tig tus kov mus rau txoj haujlwm xav tau.

TSO CAI RAU COV LUS QHIA

PAJ HUAM LUAG PAJ HUAM

Lub vaj huam sib luag pem hauv ntej GX 1030 muaj qhov pom tseeb thiab yooj yim pem hauv ntej vaj huam sib luag uas suav nrog 4.3 nti npo, cov ntawv qhia zaub mov softkeys, cov lej keyboard, pob qhov rooj, cov haujlwm ua haujlwm, cov yuam sij xub xub thiab thaj chaw tswj hwm.

THOV KOM TAU

1. Tshawb xyuas Kev Siv Hluav Taws Xob
   Xyuas kom meej tias cov khoom voltage yog qhov tseeb ua ntej qhib lub ntsuas. Cov khoom siv voltage ntau yam yuav tsum ua raws li cov specifications.
2. Kev Sib Txuas Hluav Taws Xob
   Txuas lub hwj chim qaum mus rau lub receptacle ntawm lub vaj huam sib luag nram qab thiab nias lub ON hloov mus qhib lub ntsuas. Lub vijtsam pib yuav tshwm sim ntawm qhov screen thaum pib pib ua raws li lub ntsiab screen zaub.
3. Auto Check
   Nias Utility, thiab xaiv qhov Test/Cal xaiv.
   Tom qab ntawd xaiv qhov kev xaiv SelfTest. Cov cuab yeej muaj 4 tsis siv neeg ntsuas kev xaiv: xyuas lub vijtsam, cov yuam sij, LEDS thiab cov kab hluav taws xob sab hauv.
4. Cov ntaub ntawv pov thawj
   Ua raws li cov kauj ruam hauv qab no txhawm rau ua qhov nrawm ntawm kev teeb tsa thiab tso tawm cov teeb liab.
   Tig lub cuab yeej rau thiab teeb nws mus rau qhov chaw pib. Txhawm rau ua qhov no, nias Utility, tom qab ntawd System, tom qab ntawd teeb rau Default.
   • Txuas BNC cov zis ntawm CH1 (ntsuab) mus rau oscilloscope.
   • Nias tus yuam sij Output ntawm BNC cov zis ntawm CH1 kom pib cov zis thiab saib cov nthwv dej raws li cov lus qhia saum toj no.
   • Nias tus yuam sij Parameter.
   • Nias Freq lossis Lub Sijhawm hauv cov ntawv qhia zaub mov thiab hloov zaus siv tus lej keypad lossis lub pob teb. Saib xyuas qhov kev hloov pauv ntawm qhov tso saib.
   • Xovxwm Amplitude thiab siv lub khawm teb lossis cov lej keyboard los hloov cov amplitude. Saib xyuas qhov kev hloov pauv ntawm qhov tso saib.
   • Nias DC Offset thiab siv lub khawm teb lossis cov lej keyboard los hloov DC Offset. Saib xyuas cov kev hloov pauv ntawm cov zaub thaum lub Scope yog teem rau DC coupling.
   • Tam sim no txuas lub CH2 (daj) BNC tso zis rau ib qho oscilloscope thiab ua raws cov kauj ruam 3 thiab 6 los tswj nws cov zis. Siv CH1/CH2 hloov los ntawm ib lub channel mus rau lwm qhov.

TUG ON/OFF OUTPUT
Muaj ob lub yuam sij ntawm sab xis ntawm lub vaj huam sib luag ua haujlwm uas yog siv los pab / cuam tshuam cov zis ntawm ob txoj kev. Xaiv ib lub channel thiab nias qhov sib txuas Cov Lus Qhia, qhov tseem ceeb backlight yuav teeb thiab cov zis yuav qhib. Nias tus yuam sij tso zis dua, qhov tseem ceeb backlight yuav raug tua thiab cov zis yuav raug kaw. Cia nias tus yuam sij tso zis rau ob vib nas this los hloov ntawm High Impedance thiab 50 Ω load.

SIV NUMERIC input
Muaj peb txheej ntawm cov yuam sij ntawm lub vaj huam sib luag pem hauv ntej, uas yog cov xub xub, pob qhov rooj thiab cov lej keyboard.

1. Tus lej keyboard yog siv los nkag rau qhov ntsuas tus nqi.
2. Lub pob qhov rooj yog siv los nce (clockwise) lossis txo (counterclockwise) tus lej tam sim no thaum teeb tsa qhov ntsuas.
3. Thaum siv pob qhov rooj los teeb tsa, cov xub xub siv los xaiv tus lej los hloov kho. Thaum siv cov lej keyboard los teeb tsa qhov tsis muaj, tus yuam sij sab laug yog siv los ua Backspace muaj nuj nqi

Mod – Modulation muaj nuj nqi
GX 1030 tuaj yeem tsim AM, FM, ASK, FSK, PSK, PM, PWM thiab DSB-AM modulated waveforms. Modulating tsis sib txawv nrog cov hom ntawm cov modulation. Hauv AM, cov neeg siv tuaj yeem teeb tsa qhov chaw (sab hauv / sab nraud), qhov tob, hloov pauv zaus, hloov pauv waveform thiab cov cab kuj. Hauv DSB-AM, cov neeg siv tuaj yeem teeb tsa qhov chaw (sab hauv / sab nraud), kev hloov pauv zaus, hloov pauv waveform thiab cov cab kuj.

Sweep - Sweep function
Hauv hom cheb, lub tshuab hluav taws xob cov kauj ruam los ntawm qhov pib zaus mus rau qhov nres zaus hauv lub sijhawm cheb tau teev tseg los ntawm tus neeg siv.
Cov waveforms uas txhawb cheb muaj xws li sine, square, ramp thiab arbitrary.

Kev tawg - tawg ua haujlwm
Kev ua haujlwm tawg tuaj yeem tsim muaj ntau yam waveforms hauv hom no. Lub sij hawm tawg tuaj yeem kav ntev npaum li cas ntawm lub voj voog waveform (N-Cycle hom), lossis thaum siv cov teeb liab sab nraud (Gated hom) siv. Txhua yam waveform (tshwj tsis yog DC) tuaj yeem siv los ua tus nqa khoom, tab sis lub suab nrov tsuas yog siv tau hauv Gated hom.

SIV COMMON FUNCTION KEYS

• Parameter
  Tus yuam sij Parameter ua rau nws yooj yim rau tus neeg teb xov tooj los teeb tsa cov kev txwv ntawm cov qauv waveforms ncaj qha.
• Kev siv hluav taws xob
  Xaiv qhov System Info xaiv ntawm cov ntawv qhia zaub mov rau view lub tshuab hluav taws xob cov ntaub ntawv kaw lus, suav nrog lub sijhawm pib, software version, hardware version, qauv thiab tus lej xov tooj.
  GX 1030 muab cov kev pabcuam ua haujlwm, uas cov neeg siv tuaj yeem ua tau view cov ntaub ntawv pab tau txhua lub sijhawm thaum ua haujlwm ntawm qhov ntsuas. Nias [Utility] → [System] → [Page 1/2] → [Pab] nkag mus rau hauv qab no interface.
• Khw/Rau
  Lub khw / Rov qab tus yuam sij yog siv los khaws thiab rov qab cov ntaub ntawv waveform thiab cov ntaub ntawv teeb tsa.
  GX 1030 tuaj yeem khaws cov ntsuas ntsuas tam sim no thiab cov neeg siv-txhais cov ntaub ntawv tsis txaus ntseeg hauv lub cim xeeb sab hauv lossis sab nraud thiab nco qab lawv thaum xav tau.
  GX 1030 muab lub cim xeeb sab hauv uas tsis yog-nplaum (C Disk) thiab USB Host interface rau lub cim xeeb sab nraud.
• Ch1/Ch2
  Tus yuam sij Ch1 / Ch2 yog siv los hloov cov channel xaiv tam sim no ntawm CH1 thiab CH2. Tom qab pib, CH1 raug xaiv raws li lub neej ntawd. Ntawm no, nias tus yuam sij xaiv CH2.

YUAV TSUM TAU TXAIS WAVEFORM
Nias [Waveforms] mus rau hauv cov ntawv qhia zaub mov. Cov example hauv qab no yuav pab kom paub txog cov kev xaiv waveform.

Tus yuam sij Waveforms yog siv los xaiv cov waveforms yooj yim.

• Waveforms → [Sine]
  Nias [Waveforms] key thiab ces nias [Sine] softkey. GX 1030 tuaj yeem tsim sine waveforms nrog zaus ntawm 1 μHz txog 30 MHz. Los ntawm kev teeb tsa zaus / Lub Sijhawm, Amplitude/High level, Offset/Low level thiab Phase, sine waveform with different parameters can be generated.
• Waveforms → [Square]
  Nias [Waveforms] key thiab tom qab ntawd nias [Square] softkey. Lub tshuab hluav taws xob tuaj yeem tsim cov square waveforms nrog zaus ntawm 1 μHz txog 30 MHz thiab hloov pauv lub luag haujlwm. Los ntawm kev teeb tsa zaus / Lub Sijhawm, Amplitude/High level, Offset/Low level, Phase and DutyCycle, square waveform with different parameters can be generated.
• Waveforms → [Ramp]
  Nias [Waveforms] thiab tom qab ntawd nias [Ramp] softkey. Lub tshuab hluav taws xob tuaj yeem tsim ramp waveforms nrog zaus 1µHz txog 500 kHz thiab sib txawv symmetry. Los ntawm kev teeb tsa zaus / Lub Sijhawm, AmpLitude/High Level, Phase thiab Symmetry, aramp waveform nrog cov tsis sib txawv tuaj yeem tsim tau.
• Waveforms → [Pulse]
  Nias [Waveforms] key thiab tom qab ntawd nias [Pulse] softkey. Lub tshuab hluav taws xob tuaj yeem tsim cov mem tes waveforms nrog zaus ntawm 1 μHz mus rau 12.5 MHz thiab sib txawv pulse dav thiab nce / poob lub sij hawm. Los ntawm kev teeb tsa zaus / Lub Sijhawm, AmpLitude/High level, Offset/Low level, PulWidth/Duty, Rise/Pall and Delay, pulse waveform with different parameters are generated.
• Waveforms → [Ntsuab]
  Nias [Waveforms] qhov tseem ceeb thiab tom qab ntawd nias [Noise Stdev] softkey. Lub tshuab hluav taws xob tuaj yeem tsim suab nrov nrog 60 MHz bandwidth. Los ntawm kev teeb tsa Stdev thiab Mean, suab nrov nrog cov ntsuas sib txawv tuaj yeem tsim tawm.
• Waveforms → [DC]
  Nias [Waveforms] qhov tseem ceeb thiab tom qab ntawd nias [Nplooj 1/2], kawg nias lub DC softkey. Lub tshuab hluav taws xob tuaj yeem tsim cov teeb liab DC nrog qib siab txog ± 10 V rau hauv HighZ load lossis ± 5 V rau hauv 50 Ω load.
• Waveforms → [Arb]
  Nias [Waveforms] qhov tseem ceeb thiab tom qab ntawd nias [Page 1/2], thaum kawg nias lub [Arb] softkey.
  Lub tshuab hluav taws xob tuaj yeem tsim cov kev ua haujlwm tsis txaus ntseeg nrog 16 K cov ntsiab lus thiab zaus mus txog 6 MHz. Los ntawm kev teeb tsa zaus / Lub Sijhawm, Amplitude/High level, Offset/Low level thiab Phase, arbitrary waveform with different parameters can be generated.

HARMONIC FUNCTION
GX 1030 tuaj yeem siv los ua lub tshuab hluav taws xob sib haum xeeb los ua kom muaj kev sib haum xeeb nrog kev txiav txim siab, amplitude thiab theem. Raws li Fourier hloov pauv, lub sij hawm ib ntus lub sij hawm sau waveform yog lub superposition ntawm ib tug series ntawm sine waveforms.

Tus neeg siv INTERFACE
GX 1030 tsuas tuaj yeem tso saib tsis tau thiab cov ntaub ntawv waveform rau ib qho ntawm ib lub sijhawm.
Daim duab hauv qab no qhia txog qhov sib cuam tshuam thaum CH1 xaiv AM modulation ntawm sine waveform. Cov ntaub ntawv tso tawm tuaj yeem sib txawv nyob ntawm qhov ua haujlwm tau xaiv.

1. Waveform Display Area
   Qhia qhov tam sim no xaiv waveform ntawm txhua channel.
2. Channel xwm txheej Bar
   Qhia txog cov xwm txheej uas tau xaiv thiab tso tawm cov teeb tsa ntawm cov channel.
3. Basic Waveform Parameters Thaj Chaw
   Qhia qhov tam sim no waveform qhov tsis muaj ntawm txhua channel. Nias Parameter thiab xaiv qhov sib thooj softkey los qhia qhov parameter kom teeb tsa. tom qab ntawd siv tus lej yuam sij lossis pob qhov rooj hloov tus nqi parameter.
4. Channel Parameters cheeb tsam
   Qhia cov load thiab tso zis load, raws li tau xaiv los ntawm tus neeg siv.
   Load-- Tus nqi ntawm cov zis load, raws li xaiv los ntawm tus neeg siv.
   Nias Utility → Output → Load, ces siv cov softkeys, tus lej yuam sij lossis pob qhov rooj hloov tus nqi parameter; los yog txuas ntxiv nias tus yuam sij tso zis rau ob thib ob los hloov ntawm High Impedance thiab 50 Ω.
   Siab impedance: tso saib HiZ
   Thauj khoom: tso saib tus nqi impedance (lub neej ntawd yog 50 Ω thiab qhov ntau yog 50 Ω txog 100 kΩ).
   Cov zis: Channel tso zis lub xeev.
   Tom qab nias cov channel tso zis tswj chaw nres nkoj, cov channel tam sim no tuaj yeem qhib / tawm.
5. LAN Status icon
   GX 1030 yuav qhia cov lus ceeb toom sib txawv raws li cov xwm txheej tam sim no.
   • Cov cim no qhia tias kev sib txuas LAN ua tiav.
   • Cov cim no qhia tias tsis muaj kev sib txuas LAN lossis kev sib txuas LAN tsis ua tiav.
6. Hom Icon
   • Cov cim no qhia tias hom tam sim no yog Phase-locked.
   • Cov cim no qhia tias hom tam sim no yog ywj pheej.
7. Ntawv qhia zaub mov
   Qhia cov ntawv qhia zaub mov sib raug rau cov haujlwm uas pom. Rau example, «User Interface» Daim duab, qhia cov tsis muaj AM modulation.
8. Modulation Parameters Thaj Chaw
   Qhia qhov tsis muaj ntawm qhov kev ua haujlwm tam sim no. Tom qab xaiv cov ntawv qhia zaub mov sib raug, siv tus lej yuam sij lossis pob qhov rooj hloov tus nqi parameter.

PHAU NTAWV

Lub Vaj Huam Sib Luag muaj ntau qhov sib cuam tshuam, suav nrog Counter, 10 MHz In/Out, Aux In/Out, LAN, USB Device, Earth Terminal thiab AC Supply Input.

• Cov txee
  BNC connector. Input impedance yog 1 MΩ. Qhov txuas no yog siv los lees txais cov teeb liab ntsuas los ntawm lub ntsuas ntsuas zaus.
• Aux In/Out
  BNC connector. Kev ua haujlwm ntawm qhov txuas no yog txiav txim siab los ntawm kev ua haujlwm tam sim no ntawm lub ntsuas ntsuas.
  • Sweep/Burst trigger teeb liab input chaw nres nkoj ntawm sab nraud trigger.
  • Sweep/Burst trigger signal output port of internal/manual trigger.
  • Qhov chaw nres nkoj tawg tawg ua rau qhov chaw nres nkoj nkag.
  • Synchronization tso zis chaw nres nkoj. Thaum synchronization tau qhib, qhov chaw nres nkoj tuaj yeem tso tawm cov teeb liab CMOS nrog tib zaus raws li cov qauv waveforms (tshwj tsis yog Suab nrov thiab DC), arbitrary waveforms, thiab modulated waveforms (tshwj tsis yog cov qauv sab nraud).
  • AM, DSB-AM, FM, PM, ASK, FSK, PSK thiab PWM sab nraud modulation teeb liab input chaw nres nkoj.
• 10 MHz Clock Input / Output Chaw nres nkoj
  BNC connector. Kev ua haujlwm ntawm qhov txuas no yog txiav txim siab los ntawm hom ntawm lub moos.
  • Yog tias lub cuab yeej siv nws lub moos sab hauv, lub connector tso tawm 10 MHz moos teeb liab tsim los ntawm cov siv lead ua oscillator hauv lub tshuab hluav taws xob.
  •  Yog tias lub cuab yeej siv lub moos sab nraud, lub connector lees txais lub moos sab nraud 10 MHz.
• Lub Ntiaj Teb Terminal
  Lub Ntiaj Teb Terminal yog siv los ua qhov ntsuas. AC Power Supply Input.
• AC fais fab mov
  GX 1030 tuaj yeem lees txais ob hom sib txawv ntawm AC input zog. AC lub zog: 100-240V, 50/60 Hz lossis 100-120 V, 400 Hz Fuse: 1.25 A, 250 V.
• USB ntaus ntawv
  Siv thaum txuas cov cuab yeej mus rau lub khoos phis tawj sab nraud kom tso cai hloov kho waveform ie, EasyWaveX) thiab cov chaw taws teeb tswj.
• LAN interface
  Los ntawm qhov interface no, lub tshuab hluav taws xob tuaj yeem txuas nrog lub computer lossis network rau kev tswj chaw taws teeb. Ib qho kev sim ua ke tuaj yeem tsim tau, raws li lub tshuab hluav taws xob ua raws li VXI-11 chav kawm tus qauv ntawm LAN-based ntsuas ntsuas.

SIV LUB BUILT-IN SYSTEM
GX 1030 muab cov kev pabcuam ua haujlwm, uas cov neeg siv tuaj yeem ua tau view cov ntaub ntawv pab tau txhua lub sijhawm thaum ua haujlwm ntawm qhov ntsuas. Nias [Utility] → [System] → [Page 1/2] → [Pab] nkag mus rau hauv qab no interface.

SOFTWARE
GX 1030 suav nrog arbitrary waveform editing software hu ua EasyWave X los yog SX-GENE: Theses software yog lub platform rau yooj yim tsim, kho thiab tranferring waveforms rau lub tshuab hluav taws xob.

EASYWAVE rau webqhov chaw:
https://www.chauvin-arnoux.com/sites/default/files/download/easywave_release.zip

SX GENE software rau webqhov chaw:
https://www.chauvin-arnoux.com/sites/default/files/download/sxgene_v2.0.zip

Mus rau peb web site mus download tau cov neeg siv phau ntawv rau koj ntsuas: www.chauvin-arnoux.com
Nrhiav lub npe ntawm koj lub cuab yeej. Thaum koj pom nws, mus rau nws nplooj ntawv. Cov neeg siv phau ntawv yog nyob rau sab xis. Download tau nws.

FRANCE
Chauvin Arnoux
12-16 rue Sarah Bernhardt
92600 Asnières-sur-Seine
TEL:+33 1 44 85 44 85
Fax:+33 1 46 27 73 89
info@chauvin-arnoux.com ib
www.chauvin-arnoux.com

INTERNATIONAL
Chauvin Arnoux
TEL:+33 1 44 85 44 38
Fax:+33 1 46 27 95 69
Peb cov kev sib cuag thoob ntiaj teb
www.chauvin-arnoux.com/contacts

Cov ntaub ntawv / Cov ntaub ntawv

metrix GX-1030 Function-Arbitrary Waveform Generator [ua pdf] Cov neeg siv phau ntawv qhia GX-1030 Function-Arbitrary Waveform Generator, GX-1030, Muaj nuj nqi-Arbitrary Waveform Generator, Waveform Generator, Generator

Cov ntaub ntawv

• Cov neeg siv phau ntawv