TSEEM CEEB VFD-350C-230 AC Input Variable Frequency Drive Module nrog PFC Function
Luam theej duab code rau phau ntawv thiab yees duab:
Nta
- 90 ~ 264Vac input, built-in PFC boost rau 380VDC
- Lub zog stage, 3-theem keyboards nrog sensors nyob rau hauv ib chav tsev rau sab nraud tswj (tswj board VFD-CB muag sperately)
- High ncov tam sim no mus txog 200% thiab 5 vib nas this
- Fanless tsim rau kev ua haujlwm ntsiag to thiab lub neej ntev
- Kev tiv thaiv: luv Circuit Court / OCP
- Internal sensors pub rau kev tswj: tam sim no sensor - lub cev muaj zog torque tswj
- DC Bus Voltage sensor - OVP/UVP
- Kub sensor - OTP
- -30 ~ + 60 ° C dav ua haujlwm kub
- Haum rau 3-theem tsav tsav (xws li BLDC, Induction motor, SynRM)
- 3 xyoo warranty
Daim ntawv thov
- HVAC
- Ntxuam
- Dej / Cua twj tso kua mis
- Cov cuab yeej fais fab
- Conveyor
- Tsis siv neeg qhov rooj
- Khoom siv dag zog
GTIN CODE
- MW Nrhiav: https://www.meanwell.com/serviceGTIN.aspx
Kev piav qhia
VFD-350C-230 yog ib qho universal variable zaus tsav fais fab module muab kev sib xyaw fais fab stage, cov tsav tsheb rooj vag thiab qhov yooj yim VFD sensors xws li peb theem tso zis tam sim no thiab kub sensors. Cov khoom no tuaj yeem siv rau kev daws teeb meem ntawm peb theem tsav tsav los ntawm kev sib koom tes nrog lwm lub cev muaj zog tsav tswj hauv qib logic thiab analog 1/0. Lub zog stage input yog ib theem tag nrho ntawm 90VAC rau 264VAC nrog PFC muaj nuj nqi. 3-theem lub cev muaj zog tso zis yog mus txog 240V nrog 200% lub peev xwm siab tshaj tam sim no. Lub VFD-350C-230 yog tsim rau peb-theem tsav tsav, xws li BLDC, Induction motor, thiab SynRM daim ntaub ntawv.
Qauv Nkauj Kauj
SPECIFICATIONS
| QAUV NO. | VFD-350C-230 | ||||
|
PWM OUTPUT (Nco ntsoov 1,2,3,4) | VOLTAGE RANGE (UVW) | 380Vmax, kab-rau-kab voltage 0 ~ 268V adjustable nrog modulated PWM, haum rau 3PH 200-240V chav kawm ntawv lub cev muaj zog | |||
| Tam sim no | Rated | 1.4 A | |||
| Peak | 2.8A rau 5 vib nas this | ||||
| RATED POWER | 350 W | ||||
| Kev ua tau zoo | 93% | ||||
| DC BUS VOLTAGE | 380 ± 5VDC | ||||
| PWM FREQUENCY | 2.5 KHz ~ 15 KHz | ||||
|
NYIAJ | RATED INPUT VOLTAGE | 90 ~ 264VAC | |||
| QHOV CHAW UA HAUJ LWM RANGE (Hz) | 47 ~ 63Hz | ||||
| Hwj chim FACTOR (Hom.) | PF> 0.99 / 115VAC, PF> 0.93 / 230VAC ntawm tag nrho cov load | ||||
| RATED input tam sim no | 3.5A / 115VAC 2A / 230VAC | ||||
| KEV TSO CAI | Txias pib 70A / 230VAC | ||||
| TXOJ CAI TSHIAB | <2mA / 240VAC | ||||
|
CONTROL / FUNCTION
(Nco ntsoov 5) | 3-PHASE PWM CONTROL | PWM tswj teeb liab rau rooj vag tsav tsheb rau IGBTs. (CN93, PIN 8-13) 3.3V TTL / CMOS cov tswv yim: Siab (> 2.7V): IGBT ON ; Tsawg (<0.4V): IGBT OFF | |||
| 3-PHASE Tam sim no SENSOR | Ua-hauv 100mΩ qis-sab shunt resistors ntawm UVW theem (CN93, PIN4 ~ 6) | ||||
| DC BUS VOLTAGE SENSOR | DC BUS Voltage sensor tso zis (CN93, PIN1) 2.5V @ DC BUS 380V | ||||
| THERMAL SENSOR | Ua-nyob rau hauv 10KΩ NTC rau sensing IGBTs kev khiav hauj lwm kub. (TSM2A103F34D1R (Thinking Electronic), PIN3 of CN93) | ||||
| FAULT SIGNAL | Inverter txhaum teeb liab (luv luv Circuit Court / OCP, CN93, PIN7). 3.3V TTL / CMOS tso zis: Ib txwm: Siab (> 3V); Qhov txawv txav: Tsawg (<0.5V) | ||||
| AUXILIARY POWER | Tsis yog cais tawm 15V tso zis hluav taws xob rau sab nraud tswj board (CN93, PIN 14 rau PIN2) 15V @0.1A ; Kev kam rau siab +/- 0.5V, Ripple 1Vp-p max | ||||
| Kev tiv thaiv | NYIAM QAIB | Kev tiv thaiv hom: kaw o/p voltage, rov qhib lub zog kom rov zoo | |||
| Ib puag ncig | Ua hauj lwm TEMP. | -30 ~ +60 ℃ (Saib rau "Dreating Curve") | |||
| Ua hauj lwm HUMIDITY | 20 ~ 90% RH tsis ua-hws | ||||
| STORAGE TEMP., HUMIDITY | -40 ~ + 85 ℃, 10 ~ 95% RH tsis-condensing | ||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, lub sij hawm rau 60min. txhua tus nrog X, Y, Z axes | ||||
|
SAFETY & EMC | SAFETY Standard | CB IEC61800-5-1, TUV / BS EN / EN61800-5-1, EAC TP TC004 pom zoo | |||
| Nrog VOLTAGE | I/P-FG: 2 KVAC | ||||
| ISOLATION RESISTANCE | I / P-FG: 100M Ohms / 500VDC / 25 ℃ / 70% RH | ||||
|
EMC Kev Ntseeg | Parameter | Txuj | Kuaj Qib / Nco tseg | ||
| Ua | BS EN / EN IEC61800-3 | Chav Kawm A, C2 | |||
| Rho tawg | BS EN / EN IEC61800-3 | Chav Kawm A, C2 | |||
| Harmonic Tam Sim No | BS EN / EN IEC61000-3-2 | Chav Kawm A | |||
| Voltage Ua Flicker | TS EN 61000-3-3 | —– | |||
|
EMC THAWJ COJ | BS EN / EN IEC61800-3, thib ob ib puag ncig | ||||
| Parameter | Txuj | Kuaj Qib /Note | |||
| ESD | TS EN 61000-4-2 | Qib 3, 8KV cua; Qib 2, 4KV tiv tauj | |||
| Rho tawg | BS EN / EN IEC61000-4-3 | Qib 3 | |||
| EFT / Txoj Haujlwm Burest | TS EN 61000-4-4 | Qib 3 | |||
| Surge | TS EN 61000-4-5 | Qib 3, 2KV / Kab-Lub Ntiaj Teb; Qib 3, 1KV / Kab-Kab | |||
| Ua | TS EN 61000-4-6 | Qib 3 | |||
| Sib nqus teb | TS EN 61000-4-8 | Qib 4 | |||
| Voltage Dips thiab cuam tshuam | BS EN / EN IEC61000-4-11 | > 95% poob 0.5 lub sijhawm, 30% poob 25 lub sijhawm, > 95% cuam tshuam 250 lub sijhawm | |||
| Voltage kev sib txawv | IEC 61000-2-4 Chav Kawm 2 | ± 10% Tsis muaj | |||
| Tag nrho Harmonic distortion (THD) Ib tus neeg txiav txim siab | IEC 61000-2-4 Chav Kawm 3 IEC 61000-4-13 Chav Kawm 3 | THD 12% | |||
| Kev hloov pauv ntau zaus | IEC 61000-2-4: Cov | ± 4% | |||
| Kev hloov pauv ntau zaus | IEC 61000-2-4: Cov | 2% / s | |||
| Lwm tus | MTBF | 2078.9K teev min.Telcordia SR-332 (Bellcore); 191.5K teev min.MIL-HDBK-217F (25 ℃) | |||
| DIMENSION (L * W * H) | 146 * 62 * 31 hli | ||||
| Ntim | 0.38Kg; 32pcs / 13.18kg / 0.87CUFT | ||||
CEEB TOOM:
- 3-theem 220V lub cev muaj zog raug pom zoo. Thov xav txog qhov ntsuas tam sim no thaum siv rau 100-120V chav kawm lub cev muaj zog.
- Xa mus rau qhov muaj peev xwm tshaj plaws tam sim no hauv "V / I Curve".
- Kev ua tau zoo yog kuaj nrog inductive load ntawm ntsuas tam sim no thiab tag nrho lub zog.
- Txhua qhov tsis hais tshwj xeeb yog ntsuas ntawm 230VAC input, ntsuas load thiab 25 ° C ntawm qhov kub thiab txias.
- Thov mus saib "Functional Manual" kom paub meej ntxiv.
Product Liability Disclaimer: Yog xav paub ntxiv, thov mus saib https://www.meanwell.com/serviceDisclaimer.aspx
Thaiv tau Diagram
V/I CURVE
Derating Nkhaus
Tawm Tawm Derating VS Cov Lus Tawm Voltage
Peak Tam sim no
Efficiency vs Load
Phau ntawv muaj nuj nqi
- 3-phase PWM Control (CN93, PIN8 ~ 13)
VFD-350C-230 muab rau-hloov Circuit Court los ntawm kev siv 3 ib nrab-choj IGBTs. IGBTs ntawm txhua theem yog tswj los ntawm PWM_UH/U,, PWM_V, N, thiab PWM_W,/W, (PIN 8 ~ 13). Cov tswv yim xav tau rau PWM yog sib xws nrog TTL thiab CMOS 3.3V cov cim. Thov saib daim duab hauv qab no.
CEEB TOOM: Nws yog ib qho tsim nyog yuav tsum ua kom tsawg kawg nkaus-lub sij hawm ntawm qhov hloov siab thiab qis ntawm txhua theem.
3-theem Tam Sim No Tshawb Pom & Kev Tiv Thaiv Overcurrent (CN93, PIN4 ~ 6)
Tsawg-sab shunt resistors 100m tau teeb tsa rau txhua theem ntawm VFD-350C-230 rau kev ntsuas tam sim no thiab ntsuas qhov ntsuas luv luv. Nws tau pom zoo kom txo qhov ntev ntawm kev tshawb pom sab nraud thiab kuaj pom lub teeb liab nrog OPAs. Thov saib daim duab hauv qab no.
Yog tias cov zis tam sim no tshaj 200% ntawm tus nqi ntsuas, qhov kev tiv thaiv sab hauv yuav raug cuam tshuam thiab kaw lub rooj tsav tsheb rau kev tiv thaiv.
DC BUS Voltage Kev Tshawb Fawb (CN93, PIN1)
VFD-350C-230 yog tsim-hauv nrog DC tsheb npav voltage sensor (HV + sensor, PIN 1). Lub sensor muab 2.5V tso zis thaum DC tsheb npav voltage 380v. Nws tau pom zoo kom ntes cov teeb liab los ntawm OPAs. Thaum voltage ntawm lub tsheb npav DC tshaj 420V, PWM input teeb liab yuav tsum kaw rau kev tiv thaiv.
IGBT ntsuas kub (CN93, PIN3)
VFD-350C-230 yog ua-nyob rau hauv NTC resistor rau kuaj IGBTs kub. Cov neeg siv tuaj yeem ntes IGBTs kub rau kev tiv thaiv. (NTC hom: TSM2A103F34D1R, Xav Hauv Hluav Taws Xob) Cov kev pom zoo nrhiav pom hauv qab no. Nws tau pom zoo kom kaw PWMs tawm tswv yim, yog tias qhov kub siab tshaj 100 ° C.
Txhaum teeb liab
Yog tias VFD-350C-230 ntsib ib qho overcurrent mob thiab tseem nyob rau hauv lub xeev ntawd rau lub sij hawm overcurrent yam tsawg kawg nkaus, lub FAULT teeb liab yuav qhib tau (active qis) ceeb toom rau sab nraud controller los yog Circuit Court.
Cov lus pom zoo nres (CN100, PIN1,3)
VFD-350C-230 tshwj tseg CN100 PIN1,3 uas txuas rau HV +, HV- rau kev tsim hluav taws xob nres. Qhov siab tshaj plaws voltage ntawm DC Bus (HV +) yuav tsum tsis txhob siab tshaj 420V.
Mechanical Specification
AC Inout Terminal Pin NO. Assianment (TB1).
| Tus Pin No. | Txoj hauj lwm | ||
| 1 | AC/L. | ||
| 2 | AC/Nws | ||
| 3 | |||
Output Terminal Pin NO. Kev Ua Haujlwm (TB100)
| Tus Pin No. | Txoj hauj lwm |
| 1 | U |
| 2 | V |
| 3 | W |
380V DC Bus Connector (CN100): JST B3P-VH lossis sib npaug
| Tus Pin No. | Txoj hauj lwm |
| 1 | HV+ |
| 2 | Tsis Muaj Pin |
| 3 | HV- |
- Mating vaj tse: JST VHR los yog sib npaug
- Terminal: JST SVH-21T-P1.1 los yog sib npaug
- CN100 yog siv rau kev txhim kho cov cuab yeej siv hluav taws xob, zam VFD-350C-230 kev puas tsuaj.
Tswj Pin NO. Kev Ua Haujlwm (CN93): HRS DF11-14DP-2DS lossis sib npaug
| Tus Pin No. | Txoj hauj lwm | Tus Pin No. | Txoj hauj lwm |
| 1 | HV + sensor | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_L |
| 3 | RTH | 10 | PWM_V H |
| 4 | RSH _ ua | 11 | PWM_V L |
| 5 | RSH _V | 12 | PWM_U H |
| 6 | RSH _W | 13 | PWM_U L |
| 7 | FAULT | 14 | Vaux_15V |
- Mating vaj tse: HRS DF 11-14DS los yog sib npaug
- Terminal HRS DF11-** SC lossis sib npaug
Tswj Pin No. Assignment (CN93):
| Tus Pin No. | Muaj nuj nqi | Kev piav qhia |
| 1 | HV + sensor | DC BUS Voltage sensor tso zis, siv rau tus pin 2 (HV-) |
| 2 | HV- | DC BUS Voltage sensor tso zis hauv av |
| 3 | RTH | Kub sensor |
| 4 | RSH_U | U theem tam sim no sensor tso zis |
| 5 | RSH_V | V theem tam sim no sensor tso zis |
| 6 | RSH_W | W theem tam sim no sensor tso zis |
| 7 | FAULT | Tshaj tam sim no nrhiav tau. Nquag> 3V, Abnormal <0.5V |
| 8 | PWM_WH | W theem siab sab logic tswv yim, ntawm> 2.7V; tawm <0.4V |
| 9 | PWM_WL | W theem qis sab logic tswv yim, ntawm> 2.7V; tawm <0.4V |
| 10 | PWM_VH | V theem siab sab logic tswv yim, ntawm> 2.7V; tawm ntawm <0.4V |
| 11 | PWM_VL | V theem qis sab logic tswv yim, ntawm> 2.7V; tawm <0.4V |
| 12 | PWM_UH | U theem siab sab logic tswv yim, ntawm> 2.7V; tawm <0.4V |
| 13 | PWM_UL | U theem qis sab logic tswv yim, ntawm> 2.7V; tawm ntawm <0.4V |
| 14 | Vaux_15V | Pab txhawb voltage tso zis 15V siv rau tus pin2 (HV-). Qhov siab tshaj plaws load tam sim no yog 0.1A |
Daim ntawv thov
Daim ntawv thov example: BLDC tsav daim ntawv thov
- Daim duab qhia tau hais tias BLDC tsav system teeb tsa nrog VFD-350C-230.
- Cov neeg tsim khoom tuaj yeem tswj PWM teeb liab ntawm 6-hloov los ntawm kev siv SPWM lossis SVPWM, thiab lwm yam rau 3-theem voltage modulation, thiab tsim cov txheej txheem tswj lub hauv paus ntawm qhov tam sim no shunt sensors ntawm 3-theem qis-sab hloov (Rs-_U / V / W) thiab DC BUS voltage sensor (HV + sensor) uas muab los ntawm VFD-350C-230.
- Cov neeg tsim khoom tuaj yeem xaiv qhov tsim nyog BLDC txoj haujlwm sensors xws li encoder lossis Hall-effect sensors kom haum rau lawv cov ntawv thov.
- Nws tau pom zoo kom nruab lub nres Circuit Court / khoom siv ntawm HV + / HV-pin (DC BUS, CN100) kom tsis txhob DC BUS OVP thaum BLDC decelerating.
- Nws tau hais kom kaw PWM cov tswv yim lossis txuas rau cov khoom siv nres nres kom muaj kev nyab xeeb thaum DC Bus voltage yog siab tshaj 420V.
- Yog tias VFD-350C-230 tau siv nrog kev tswj tsis tsim nyog, xws li kev nrawm nrawm lossis tsis zoo tam sim no, nws yuav ua rau VFD-350C-230 qhov txhaum-xeev kaw qhov tso zis vol.tage low-level on FAULT pin).
Kev teeb tsa
- Ua haujlwm nrog ntxiv aluminium phaj
Yuav kom ua tau raws li "Derating Curve" thiab "Static Characteristics", VFD series yuav tsum tau muab tso rau hauv ib lub phaj txhuas (los yog lub txee ntawm tib qhov loj) rau hauv qab. Qhov luaj li cas ntawm qhov pom zoo aluminium phaj yog qhia raws li hauv qab no. Thiab rau kev ua kom zoo thermal kev ua tau zoo, aluminium phaj yuav tsum muaj qhov sib luag thiab du nto (los yog coated nrog thermal roj), thiab VFD series yuav tsum tau ruaj khov rau hauv nruab nrab ntawm lub phaj txhuas.
- Nrog 15CM yuam cua
Cov Npe Nkag
Yog tias koj muaj kev tswj hwm ntawm daim ntawv thov tshwj xeeb, thov sab laj MEAN WELL kom paub meej ntxiv. Lub Rooj Tswjhwm Saib Xyuas Lub Cev (Motor control board thiab VFD tsav module yuav tsum tau txiav txim nyias):
Daim ntawv thov
- Variable zaus Module (VFD series)
- Lub Rooj Tswjhwm Saib Xyuas Kev Ua Haujlwm ntawm Kev Sib Tw Sib Tw (Tsim los ntawm Tus Neeg Siv lossis Soluton Muab los ntawm MEAN WELL)
- 3-theem Pump Motor
- Roj teeb
- Variable zaus Module (VFD series)
- Lub Rooj Tswjhwm Saib Xyuas Kev Ua Haujlwm ntawm Kev Sib Tw Sib Tw (Tsim los ntawm Tus Neeg Siv lossis Soluton Muab los ntawm MEAN WELL)
- 3-theem Log Tsav rau AGV Daim Ntawv Thov.
- Variable zaus Module (VFD series)
- Lub Rooj Tswjhwm Saib Xyuas Kev Ua Haujlwm ntawm Kev Sib Tw Sib Tw (Tsim los ntawm Tus Neeg Siv lossis Soluton Muab los ntawm MEAN WELL)
- 3-theem Ntxuam Tsav
- HEPA rau Lim Cua
DEMO KIT
Thov hu rau MEAN WELL kom paub meej ntxiv.
VFD Demo Kit Lub luag haujlwm tseem ceeb thiab nta.
- Built-in VFD-350P-230 thiab 230V lub cev muaj zog.
- Lub cev muaj zog pib / nres / pem hauv ntej / thim rov qab / ceev tswj.
- Motor start/stop/forward/reverse indicator txoj cai.
- Lub cev muaj zog ceev (RDM) zaub.
- Control board hloov tau.
- Txhawb kev txuas sab nraud lub cev muaj zog.
Phau ntawv qhia kev teeb tsa
Thov xa mus rau: http://www.meanwell.com/manual.html.
Cov ntaub ntawv / Cov ntaub ntawv
 | TSEEM CEEB VFD-350C-230 AC Input Variable Frequency Drive Module nrog PFC Function [ua pdf] Tus tswv phau ntawv VFD-350C-230 AC Input Variable Frequency Drive Module nrog PFC Function, VFD-350C-230, AC Input Variable Frequency Drive Module nrog PFC Function, zaus Tsav Module nrog PFC Function, Module nrog PFC Function, PFC Function, Function |
