MacB IT Solutions ESP32-WROVER-IE BuzzBoxx Wi-Fi Module
Specifications
- Khoom npe: BuzzBoxx
- Version: V1.0
- Tso Tawm Hnub: 2024.12
Cov ntaub ntawv khoom
BuzzBoxx yog lub platform kho vajtse tsim los tsim cov ntawv thov siv Arduino thiab ESP32 modules.
Cov lus qhia siv khoom
Taw qhia
BuzzBoxx yog ntau yam cuab yeej rau kev txhim kho software. Nws txhawb Arduino thiab ESP32 modules rau kev tsim cov ntawv thov.
Pib pib
Pib los ntawm kev teeb tsa qhov chaw tsim kho software yooj yim raws li tau piav qhia hauv cov neeg siv phau ntawv qhia.
Configure
Ua raws li cov ntawv qhia zaub mov-raws li configuration wizard los teeb tsa koj qhov chaw loj hlob.
Txuas
Txuas BuzzBoxx kho vajtse rau koj lub computer siv cov cables tsim nyog.
Test Demo
Khiav qhov kev sim demo kom paub meej tias cov khoom siv ua haujlwm raug.
Upload Sketch
Txhawm rau upload cov duab kos, ua raws cov kauj ruam no:
- Tsim koj daim duab kos duab.
- Nyem cov duab kos rau ESP32 module.
- Saib xyuas cov zis rau txhua qhov yuam kev.
SSC Command Reference
BuzzBoxx txhawb ntau yam lus txib rau kev teeb tsa:
- op: Ua haujlwm commandStatib: Configures chaw nres tsheb hom.App: Configure access point mode.
- Mac: Teem MAC chaw nyob.
- dhcp ua: Qhib DHCP.
- Ip: Teem IP chaw nyob.
- Reboot: Reboot lub system.
BuzzBoxx
- BuzzBoxx yog pawg thawj coj saib kev txhim kho. Nws tuaj yeem ua haujlwm ntawm nws tus kheej.
- Nws muaj ESP32-WROVER-IE Module txhawb nqa Wi-Fi + BT + BLE kev sib txuas lus raws tu qauv thiab motherboard PCB.
- Thiab cov khoom no muaj 4G ua haujlwm. LTE Cat-4 Module yog SIM7600G-H.
- Rau cov ntawv thov xws li los ntawm cov hluav taws xob tsis tshua muaj hluav taws xob sib txuas mus rau cov haujlwm uas xav tau tshaj plaws.
ESP32 integrates Wi-Fi (2.4 GHz band) thiab Bluetooth 4.2 cov kev daws teeb meem ntawm ib lub nti, nrog rau cov cores ua tau zoo dual thiab ntau lwm yam khoom siv sib txawv. Tsim los ntawm 40 nm thev naus laus zis, ESP32 muab lub zog muaj zog, kev sib koom ua ke zoo heev los ua kom tau raws li qhov xav tau txuas ntxiv rau kev siv lub zog siv tau zoo, tsim qauv tsim, thiab kev ruaj ntseg. - Peb muab cov khoom siv kho vajtse thiab software yooj yim uas txhawb nqa cov neeg tsim daim ntawv thov los tsim lawv cov tswv yim nyob ib ncig ntawm ESP32 series kho vajtse. Cov txheej txheem txhim kho software muab yog npaj rau kev tsim Internet-of-Things (IoT) sai sai, nrog Wi-Fi, Bluetooth, kev tswj fais fab thiab lwm yam kev ua haujlwm siab heev.
Arduin
Ib txheej ntawm cov ntawv hla-platform sau hauv Java. Lub Arduino Software IDE yog muab los ntawm Cov Txheej Txheem Kev Ua Haujlwm thiab kev tsim kho ib puag ncig ntawm Wiring program. Cov neeg siv tuaj yeem tsim cov ntawv thov hauv Windows / Linux / MacOS raws li Arduino. Nws raug pom zoo kom siv Windows 10. Qhov rai OS tau siv los ua tus example nyob rau hauv daim ntawv no rau kev piav qhia lub hom phiaj.
Kev npaj
Txhawm rau tsim cov ntawv thov rau ESP32, koj xav tau:
- PC loaded nrog Windows, Linux, x lossis Mac operating system
- Toolchain los tsim daim ntawv thov rau ESP32
- Arduino uas tseem ceeb muaj API rau ESP32 thiab cov ntawv sau ua haujlwm rau Toolchain
- Lub ESP32 board nws tus kheej thiab ib tug USB cable los txuas rau lub PC
Rub tawm Arduino Software
Qhov ceev tshaj plaws yuav ua li cas rau nruab Arduino Software (IDE) ntawm Windows tshuab
Ceev Starid
- Cov website muab kev qhia pib sai
- Windows:
- Linux:
- Mac OS X:
Kev teeb tsa cov kauj ruam rau Windows platform Arduino
Nkag mus rau qhov rub tawm interface, xaiv Windows installer rau nruab ncaj qha
Nruab Arduino Software
Download tau Git
Download tau lub installation pob Git.exe.
Pre-build configuration Nyem qhov Arduino icon, ces right-click thiab xaiv "Qhib nplaub tshev qhov twg" Xaiv kho vajtse ->
- Nas ** Txoj nyem ** ->
- Nyem Git Bash Ntawm no
Cloning ib lub chaw khaws cia tej thaj chaw deb
- $ mkdir espressif
- $ cd espressif
- $ git clone -recursive https://github.com/espressif/arduino-esp32.git esp32
Txuas
Koj yuav luag nyob ntawd. Txhawm rau txuas ntxiv mus, txuas ESP32 lub rooj tsavxwm rau PC, tshawb xyuas hauv qab qhov chaw nres nkoj ntawm lub rooj tsavxwm pom, thiab xyuas seb puas muaj kev sib txuas lus ua haujlwm.
Test Demo
Xaiv File> > Example>>WiFi>>WiFiScan
Upload Sketch
Xaiv Board
Cov cuab yeej <
Upload
Sketch << Upload
Serial Monitor
Cov cuab yeej << Serial Monitor
SSC Command Reference
op
Nov yog qee cov lus txib Wi-Fi rau koj los sim cov module.
Kev piav qhia
op cov lus txib yog siv los teeb tsa thiab nug Wi-Fi hom ntawm lub kaw lus.
Example
op- Q
op: ua
Parameter
| -Q | Nug Wi-Fi hom. |
| -S | Teem lub Wi-Fi hom. |
|
ua wmode |
Muaj 3 hom Wi-Fi:
• hom = 1: STA hom • hom = 2: AP hom • hom = 3: STA+AP hom |
sta
Kev piav qhia
sta commands yog siv los luam theej duab STA network interface, txuas lossis txiav AP, thiab nug cov xwm txheej txuas ntawm STA network interface.
Example
sta -S [-s ssid] [-b bssid] [-n channel] [-h] sta -Q
sta -C [-s ssid] [-p password] sta -D
Parameter
| -s ssd | Luam theej duab lossis txuas Access Points nrog ssid. |
| -b bsd | Luam theej duab Access Points nrog bssid. |
| -n channel | Luam theej duab channel. |
| -h | Qhia cov txiaj ntsig scan nrog zais ssid Access Points. |
| -Q | Qhia STA txuas txuas. |
| -D | Disconnected nrog Access Points tam sim no. |
ap
Kev piav qhia
ap cov lus txib yog siv los teeb tsa qhov parameter ntawm AP network interface.
Example
ap -S [-s ssid] [-p password] [-t encrypt] [-n channel] [-h] [-m max_sta] ap –Q
ap -L
Parameter
| -S | Teem AP hom. |
| -s ssd | Teem AP ssid. |
| -p password | Teem AP password. |
| -t encrypt | Teem AP encrypt hom. |
| -h | Hide ssid. |
| -m max_sta | Teem AP max kev sib txuas. |
| -Q | Qhia AP parameters. |
| -L | Qhia MAC Chaw Nyob thiab IP Chaw Nyob ntawm chaw nres tsheb txuas. |
mac ua
Kev piav qhia
Mac commands yog siv los nug MAC chaw nyob ntawm lub network interface.
Example
mac -Q [-o mode]
| -Q | Qhia MAC chaw nyob. |
|
-o mode |
• hom = 1: MAC chaw nyob hauv STA hom.
• hom = 2: MAC chaw nyob hauv AP hom. |
Parameter
| -Q | Qhia MAC chaw nyob. |
|
-o mode |
• hom = 1: MAC chaw nyob hauv STA hom.
• hom = 2: MAC chaw nyob hauv AP hom. |
Kev piav qhia
dhcp cov lus txib yog siv los pab lossis lov tes taw dhcp server / tus neeg siv khoom.
. Example
dchp -S [-o hom] dhcp -E [-o hom] dhcp -Q [-o hom]
Parameter
| Pib DHCP (Client/Server). | |
| -E | Xaus DHCP (Client/Server). |
| -Q | Qhia qhov xwm txheej DHCP. |
|
-o mode |
• hom = 1: DHCP tus neeg siv khoom ntawm STA interface.
• hom = 2: DHCP neeg rau zaub mov ntawm AP interface. • hom = 3: ob leeg. |
ip
Kev piav qhia
ip hais kom ua yog siv los teeb tsa thiab nug tus IP chaw nyob ntawm lub network interface.
Example
ip -Q [-o hom] ip -S [-i ip] [-o hom] [-m npog] [-g rooj vag]
| -Q | Qhia IP chaw nyob. |
|
-o mode |
• hom = 1: IP chaw nyob ntawm interface STA.
• hom = 2: IP chaw nyob ntawm interface AP. • hom = 3: ob leeg |
| -S | Teem IP chaw nyob. |
| -ib ip | IP chaw nyob. |
| -m mas | Subnet chaw nyob daim npog qhov ncauj. |
| -g rooj vag | Default gateway. |
rov pib dua
Kev piav qhia
reboot hais kom ua yog siv los reboot lub rooj tsavxwm.
Example
rebot
ram Cov
ram hais kom ua yog siv los nug qhov loj ntawm qhov seem seem hauv qhov system.
Example
ram
FCC ceeb toom:
Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm pawg neeg saib xyuas kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai los khiav cov khoom siv.
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:
- Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam, thiab
- Cov cuab yeej no yuav tsum lees txais kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau tsis muaj kev ua haujlwm.
Lub transmitter no yuav tsum tsis txhob muab tso rau hauv los yog ua haujlwm ua ke nrog lwm tus kav hlau txais xov lossis cov khoom xa tawm.
CEEB TOOM:
Nco tseg: Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov khoom siv thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:
- Reorient los yog tshem tawm cov kav hlau txais xov.
- Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
- Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
- Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.
FCC Radiation Exposure Statement:
Cov cuab yeej no ua raws li FCC cov kev txwv tsis pub muaj hluav taws xob tau teeb tsa rau qhov chaw tsis muaj kev tswj hwm .Cov khoom siv no yuav tsum tau nruab thiab ua haujlwm nrog qhov deb tsawg kawg 20cm ntawm lub tshuab hluav taws xob & koj lub cev.
FAQS
Q: Kuv puas tuaj yeem siv BuzzBoxx rau lwm lub platform kho vajtse?
A: Lub BuzzBoxx tau tsim tshwj xeeb rau kev siv nrog Arduino thiab ESP32 modules. Compatibility nrog rau lwm yam platforms yog tsis guaranteed.
Q: Kuv tuaj yeem daws teeb meem kev sib txuas li cas?
A: Xyuas kom meej tias txhua qhov kev sib txuas muaj kev ruaj ntseg thiab cov tsav tsheb raug teeb tsa kom raug. Restarting ob lub hardware thiab software feem ntau tuaj yeem daws teeb meem kev sib txuas.
Cov ntaub ntawv / Cov ntaub ntawv
 |
MacB IT Solutions ESP32-WROVER-IE BuzzBoxx Wi-Fi Module [ua pdf] Cov neeg siv phau ntawv qhia ESP32-WROVER-IE, ESP32-WROVER-IE BuzzBoxx Wi-Fi Module, BuzzBoxx Wi-Fi Module, Wi-nkaus Module, Module |