M5STACK M5Dial Embedded Development Board

Cov ntaub ntawv khoom

Specifications:

• Main Controller: ESP32-S3FN8
• Kev sib txuas lus wireless: WiFi (WIFI), OTGCDC kev ua haujlwm
• Expansion Interface: HY2.0-4P interface, tuaj yeem txuas thiab nthuav dav I2C sensors
• Nco: 8M-FLASH
• GPIO Pins thiab Programmable Interfaces: Grove Chaw nres nkoj: tuaj yeem txuas thiab nthuav dav I2C sensors

Cov lus qhia siv khoom

Teem M5Dial rau WiFi Cov Ntaub Ntawv:

1. Qhib Arduino IDE (saib rau Arduino IDE Installation Tutorial)
2. Xaiv lub M5Dial pawg thawj coj saib hauv IDE thiab xa cov lej
3. Lub vijtsam yuav tso saib cov scanned WiFi tes hauj lwm thiab lawv cov ntaub ntawv qhia lub zog

Teeb tsa M5Dial rau BLE Cov Ntaub Ntawv:

1. Qhib Arduino IDE (saib rau Arduino IDE Installation Tutorial)
2. Xaiv lub M5Dial pawg thawj coj saib hauv IDE thiab xa cov lej
3. Lub vijtsam yuav tso saib cov khoom siv BLE scanned nyob ze

FAQ

Q: Lub ntsiab tswj ntawm M5Dial yog dab tsi?

A: Lub ntsiab tswj ntawm M5Dial yog ESP32-S3FN8.

Q: M5Dial muaj peev xwm sib txuas lus dab tsi?

A: M5Dial txhawb kev sib txuas lus WiFi thiab muaj OTGCDC ua haujlwm.

Q: Kuv tuaj yeem nthuav qhov kev ua haujlwm ntawm M5Dial li cas?

A: Koj tuaj yeem nthuav qhov kev ua haujlwm los ntawm kev txuas I2C sensors los ntawm HY2.0-4P interface.

OUTLINE

• Raws li ntau yam kev txhim kho pawg thawj coj saib, M5Dial integrates cov yam ntxwv tsim nyog thiab sensors rau ntau daim ntawv thov kev tswj hwm hauv tsev. Nws nta 1.28-nti puag ncig TFT touchscreen, lub tshuab hluav taws xob teb, RTC Circuit Court, buzzer, thiab khawm hauv qab,
  ua rau cov neeg siv tau yooj yim siv ntau yam ntawm cov phiaj xwm muaj tswv yim.
• Lub ntsiab tswj ntawm M5Dial yog M5StampS3, micro module raws li ESP32-S3 nti paub txog nws qhov kev ua tau zoo thiab kev siv hluav taws xob tsawg. Nws txhawb Wi-nkaus, nrog rau ntau yam kev sib txuas hauv qab xws li SPI, I2C, UART, ADC, thiab ntau dua. M5 StampS3 kuj los nrog 8MB ntawm built-in Flash, muab qhov chaw cia txaus rau cov neeg siv.
• Qhov zoo tshaj plaws ntawm M5Dial yog nws lub tshuab hluav taws xob teb, uas tau sau tseg txoj haujlwm thiab kev taw qhia ntawm lub pob qhov rooj, xa cov kev sib tham zoo dua. Cov neeg siv tuaj yeem kho qhov chaw xws li ntim, qhov ci, thiab cov ntawv qhia zaub mov xaiv siv lub pob qhov rooj, lossis tswj cov ntawv thov hauv tsev xws li teeb, cua txias, thiab kab hlau rhuav. Lub cuab yeej built-in zaub tso cai rau kev nthuav tawm cov xim sib txawv thiab cov teebmeem.
• Nrog nws qhov loj me thiab lub teeb yuag tsim, M5Dial yog tsim rau ntau yam kev siv kos duab. Txawm hais tias nws yog tswj hwm cov cuab yeej hauv tsev hauv lub tsev ntse lossis kev saib xyuas thiab tswj cov tshuab hauv kev lag luam automation, M5Dial tuaj yeem ua ke yooj yim los muab kev tswj xyuas ntse thiab kev sib cuam tshuam.
• M5Dial tseem nta Cov neeg siv tuaj yeem siv txoj haujlwm no rau cov ntawv thov xws li kev tswj xyuas kev nkag, kev txheeb xyuas tus kheej, thiab kev them nyiaj. Tsis tas li ntawd,
• M5Dial yog nruab nrog RTC Circuit Court kom tswj lub sijhawm ccu tus nqi thiab hnub tim. Tsis tas li ntawd, nws muaj xws li onboard buzzer thiab lub cev khawm rau lub suab nrov nrov thiab kev ua haujlwm sawv.
• M5Dial muab ntau yam kev xaiv fais fab mov los ua kom haum rau ntau yam kev xav tau. Nws haum rau ntau yam ntawm cov tswv yim voltages, txais 6-36V DC input. Tsis tas li ntawd, nws nta lub roj teeb chaw nres nkoj nrog lub teeb hluav taws xob built-in, ua kom tsis muaj kev sib txuas rau cov roj teeb lithium sab nraud. Qhov kev hloov pauv no tso cai rau cov neeg siv lub zog M5Dial ntawm USB-C, DC interface, lossis lub roj teeb sab nraud kom yooj yim rau ntawm-tus-mus.
• M5Dial tseem khaws ob lub PORTA thiab PORTB interfaces, txhawb kev nthuav dav ntawm I2C thiab GPIO li. Cov neeg siv tuaj yeem txuas ntau yam sensors, actuators, cov lus qhia, thiab lwm yam khoom siv los ntawm cov kev sib tshuam no, ntxiv kev ua haujlwm ntau dua thiab muaj peev xwm.

M5STACK Dial

1. Kev Sib Txuas Lus Muaj Peev Xwm:
   • Main Controller: ESP32-S3FN8
   • Kev sib txuas lus wireless: WiFi (WIFI), OTG\CDC ua haujlwm
   • Expansion Interface: HY2.0-4P interface, tuaj yeem txuas thiab nthuav dav I2C sensors
2. Processor thiab Performance:
   • Processor Qauv: Xtensa LX7 (ESP32-S3FN8)
   • Processor moos ceev: Xtensa® dual-core 32-ntsis LX7 microprocessor, mus txog 240 MHz
3. Nco:
   • 8M-FLASH
4. GPIO Pins thiab Programmable Interfaces:
   • Grove Chaw nres nkoj: Tau txuas thiab nthuav dav I2C sensors

SPECIFICATIONS

Parameters & Specifications/Tus nqi

• MCU ESP32-S3FN8 @ Xtensa® dual-core 32-ntsis LX7, 240MHz
• Kev sib txuas lus muaj peev xwm WiFi, OTG\CDC, I2C sensor expansion
• Flash Storage Capacity 8MB-FLASH
• Fais fab mov USB / DC fais fab / Lithium roj teeb
• Sensors teb encoder
• 1.28 Nti TFT Screen (nrog kov), 240 × 240px
• Audio Passive onboard hais lus
• Expansion Ports Grove chaw nres nkoj rau I2C sensor expansion
• Dimensions 45 * 45 * 32.3mm
• Ua haujlwm kub 0 ° C txog 40 ° C

QUICK pib

Sau cov ntaub ntawv WiFi

1. Qhib Arduino IDE (saib rau https://docs.m5stack.com/en/arduino/arduino_ide View lub installation txhim kho pawg thawj coj saib thiab software qhia)
2. Xaiv lub M5Dial pawg thawj coj saib thiab upload cov cai
3. Lub vijtsam qhia cov scanned WiFi thiab cov ntaub ntawv siv zog

Sau cov ntaub ntawv BLE

1. Qhib Arduino IDE (saib rau https://docs.m5stack.com/en/arduino/arduino_ide View lub installation txhim kho pawg thawj coj saib thiab software qhia)
2. Xaiv lub M5Dial pawg thawj coj saib thiab upload cov cai
3. Lub vijtsam qhia txog cov khoom siv BLE scanned

FCC TXUJ CI

Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:

1. Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam, thiab
2. Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau.

Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm pawg neeg saib xyuas kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai los khiav cov khoom siv.

Nco tseg:
Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim kev siv thiab tuaj yeem ua kom lub zog ntawm lub xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj kev cuam tshuam tsis zoo rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov cuab yeej tawm thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
• Txuas cov cuab yeej mus rau lub qhov hluav taws xob ntawm ib lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

Cov cuab yeej no ua raws li FCC cov kev txwv tsis pub muaj hluav taws xob tau teeb tsa rau qhov chaw tsis muaj kev tswj hwm. Cov cuab yeej no yuav tsum tau nruab thiab ua haujlwm nrog qhov tsawg kawg nkaus ntawm 20cm ntawm lub tshuab hluav taws xob thiab koj lub cev.

Cov ntaub ntawv / Cov ntaub ntawv

M5STACK M5Dial Embedded Development Board [ua pdf] Cov neeg siv phau ntawv qhia M5Dial, M5Dial Embedded Development Board, Embedded Development Board, Development Board, Board

Cov ntaub ntawv

• Cov neeg siv phau ntawv