Monster Airmars XKT06 Bluetooth Wireless Headphones Instruction Manual

Product Overview & Specifications

This document provides instructions for the Monster Airmars XKT06 Bluetooth Wireless Headphones.

Product Name: Monster Airmars XKT06

Dimensions: 73x93MM

Material: 80g coated paper

Product Parameters:

Parameter	Specification
Transmission distance	10m
Driver diameter	Φ13mm
Driver impedance	32Ω±15%
Sensitivity	106±3.0dB
Frequency response	20Hz-20kHz
Battery capacity (Charging case)	3.7V 300mAh
Battery capacity (Headphone)	3.7V 35mAh
Charging time (Charging case)	≈1.5 hours
Music playtime (Headphone)	≈5 hours
Music playtime with charging case	≈22 hours
Rated input (Headphone)	5V 30mA
Rated input (Charging case)	5V 300mA

Packaging List:

Headphones *2
Charging case *1
Instructions Manual *1
Silicone Eartips L *2
Silicone Eartips S *2
Type-C Charging Cable *1

Indicator Guide

Charging Case:

When the charging case is closed and the LED flashes red 5 times, please charge the charging case.

Indicator Guide:

Mode	Describe	Sound prompt
Power On	The headphones LED indicator flashes in ice blue light for one second.	“Power on”
Power Off	The indicator LED of headphones shows blue and quickly flashes 3 times.	“Power off”
Pairing	Two headphones flash blue slowly.	“Pairing”
Connected	The headphones LED indicator is off.	“Connected”
Disconnected	The headphones LED indicator flashes in ice blue quickly.	“Disconnected”
Low Battery (Headphone)	The indicator LED of headphones stays on blue when fully charged; it goes out.	“Battery low”
Charging case low power	Red LED flashes 5 times.	(No prompt)
Charging case charging	The LED indicator flashes red slowly.	(No prompt)
Charging case fully charged	Red LED stayed on.	(No prompt)

Product Operating Instructions

Power On

Method 1: Open the charging case; the headphones will turn on automatically.

Method 2: Long touch the Multi-function button (MFB) of the headphones for 3 seconds to turn on the headphones.

Power Off

Method 1: Put the headphones into the charging case and close the cover.

Method 2: When the headphones are not connected to a Bluetooth device, long touch the MFB of the headphones for 6 seconds to turn off the headphones.

Method 3: After disconnected from the Bluetooth device for 3 minutes, the headphones will automatically turn off.

Pairing

Step One: Open the charging case; the headphones will start pairing automatically.

Step Two: On your smart device's Bluetooth list, search for and click “Monster Airmars XKT06”. When connection is successful, you will hear “Connected”.

Note: Headphones will try to reconnect to the device within 3 minutes when the connection is lost.

Operation

Touch Control Operations

Voice Assistant: Press the left MFB for 2 seconds.
Volume +: Click the right MFB.
Volume -: Click the left MFB.
Music Playback:
- Pause/Play: Double click Left/Right MFB.
- Last Song: Triple click the left MFB.
- Next Song: Triple click the right MFB.
Phone (Hands-free):
- Answer Call: Double click the Left/Right MFB.
- Reject Call: Press Left/Right MFB for 2 seconds.
- Hang Up: Double click the Left/Right MFB.
Game/Music Mode Switching: Press the right MFB for 2 seconds to enter game mode. Press the right MFB for 2 seconds to enter music mode.

Restore Factory Settings

When the headphones are not connected to a Bluetooth device, click the MFB 5 times to clear previous pairing information and re-pair.

Precautions

If the product is not used for a long time, charge it fully and ensure the device is in power-off state.
After charging is complete, unplug the charging cable to avoid damage from prolonged charging.
Clean the charging contacts regularly with a cotton swab dipped in alcohol to ensure smooth charging and prevent poor contact.
Keep the battery away from flammable materials or excessive heat, such as direct sunlight.
Intermittent audio during playback is normal for wireless products due to environmental factors, device brand, or user behavior.

Warnings

Do not use headphones at high volume for extended periods, as this may damage your hearing. It is recommended to listen at appropriate volumes for listening, calls, and music.
Do not rinse the product or immerse it in water to prevent malfunction.
Do not disassemble the product or accessories yourself, as this may cause damage and void the warranty.
Do not subject the product to strong impacts or vibrations to prevent damage.
Do not use chemical solvents or cleaning agents to clean the product.

Hazardous Substances Information

This table is compiled according to SJ/T 11364.

Name of the Parts	Hazardous Substances	Pb	Hg	Cd	Cr(VI)	PBB	PBDE
Housing		O	O	O	O	O	O
Loudspeakers		O	O	O	O	O	O
PCBA		O	O	O	O	O	O
Accessories		O	O	O	O	O	O

Note on Table Symbols:

O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.

X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

Environment Friendly Use Period (EFUP): This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical products will not leak or mutate, ensuring that the use of these substances will not result in any severe environmental pollution, any bodily injury, or damage to any assets.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2A8PV-QSMXKT06

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User Information

User Name:

Contact Number:

Mailing Address:

Email:

Postal Code:

Product Information

Product Name: Monster Airmars XKT06

Product Number:

Product Barcode / Serial Number / Batch Number:

Vendor Information

Name:

Address: