Using the Remote Control
The remote control for your Samsung Soundbar provides access to various functions. Below is a description of each button:
- 1 Power button: Turns the soundbar on or off.
- 2 (Source) button: Press to select an input source connected to the Soundbar.
- 3 Bluetooth PAIR button: Switches the Soundbar to Bluetooth pairing mode.
- 4 Up/Down/Left/Right buttons: Used for navigation and adjusting settings.
- 5 (Play / Pause) button: Controls playback of audio content.
- 6 (Mute) button: Mutes or unmutes the soundbar's audio output.
- 7 SOUND MODE button: Allows you to select different sound effects. The available modes are: SURROUND SOUND, BASS BOOST, GAME, ADAPTIVE, STANDARD.
- 8 Info button: When pressed, displays information about connected sources, such as D.IN signal format and Bluetooth devices.
- 9 Volume button: Adjusts the overall volume level.
- 10 WOOFER (BASS) LEVEL button: Push the button up or down to adjust the level of the woofer (bass).
- 11 CH LEVEL button: When pressed, the CENTER LEVEL setting is displayed. You can adjust the desired setting using the Up/Down buttons. If Rear Speakers (sold separately) are connected, the REAR LEVEL setting is also supported.
- 12 (Sound Control) button: When pressed, settings for AUDIO SYNC, VOICE ENHANCE ON/OFF, and NIGHT MODE ON/OFF are displayed in sequence. Adjustments can be made using the Up/Down buttons. If Rear Speakers (sold separately) are connected, the REAR SPEAKER ON/OFF setting is also supported.
- 13 TONE CONTROL button: When pressed, settings for TREBLE and BASS are displayed in sequence. Adjustments can be made using the Up/Down buttons.
Installing the Wall Mount
Installation Precautions
- Install only on a vertical wall.
- Do not install in locations with high temperature or humidity.
- Ensure the wall is strong enough to support the product's weight. If not, reinforce the wall or select a different installation point.
- Use fixing screws or anchors appropriate for your wall type (plaster board, iron board, wood, etc.). If possible, secure the support screws into wall studs.
- Purchase wall mounting screws suitable for the type and thickness of your wall. Recommended specifications: Diameter: M5, Length: 1 3/8 inches (35 mm) or longer.
- Connect cables from the unit to external devices before installing the Soundbar on the wall.
- Ensure the unit is turned off and unplugged from the power source before installation to prevent electric shock.
Components
The wall mount kit typically includes the following components:
- A: Wall Mount Template (used for marking drilling points)
- B: Wall Mount Screws (M4 x L10) - 2 pieces
- C: Screws for attaching the bracket to the soundbar - 2 pieces
- D: Wall Brackets - 2 pieces
Installation Steps
- Prepare the Wall: Use the Wall Mount Template (A) to mark the desired location on the wall. Ensure the template is level and positioned at least 2 inches (5 cm) from the top of the TV. Mark the drilling points indicated by the template.
- Install Wall Anchors/Screws: Drill holes at the marked points and insert appropriate wall anchors if necessary. Secure the Wall Brackets (D) to the wall using suitable screws (not always included in the kit, refer to precautions). The image shows screws (B) being used with a bracket.
- Attach Brackets to Soundbar: Align the Wall Brackets (D) with the mounting holes on the rear of the Soundbar. Secure the brackets to the Soundbar using the provided screws (C).
- Mount the Soundbar: Carefully lift the Soundbar and align the brackets attached to the soundbar with the corresponding mounting points on the wall. Slide the soundbar down to secure it in place. The diagram shows the bracket (D) with screw (B) engaging with the soundbar's mounting slots.
