Philips Party Speaker 3000 Series
Model: TAX3206
Visit www.philips.com/welcome for more information.
Important Safety Information
Before using your product, please read all accompanying safety information. This is crucial for safe operation.
(Safety information is provided in multiple languages within the original document.)
Getting Started
1. Connecting Power
Connect the power cord to the speaker's power input port and then plug it into a wall outlet.
(Diagram shows plugging the power cord into the speaker and then into a wall socket.)
2. Turning On the Speaker
Press and hold the [power button] for 3 seconds to turn the speaker on.
(Diagram shows pressing the power button on the speaker's control panel.)
3. Light Modes
Press the [light button] to cycle through the available light modes:
- Light mode 1
- Light mode 2
- Light mode 3
- Light mode 4
- Light off
Press and hold the [strobe light button] for over 3 seconds to turn the Strobe Light On/Off.
(Diagrams illustrate selecting different light modes and the strobe light function.)
4. Muting and Unmuting
Press the [mute button] to mute the audio output. Press it again to unmute.
(Diagrams show the mute/unmute function on the control panel.)
5. Bluetooth Connectivity
To connect a device via Bluetooth:
- Press the [Bluetooth button] on the speaker.
- On your device, search for "Philips TAX3206" in the Bluetooth settings and select it.
- Once paired, you can play audio wirelessly. The effective range is up to 10 meters (32.8 feet).
(Diagrams show the Bluetooth pairing process, including selecting the device and the wireless range.)
6. Audio Inputs
Line-in/Line-out
Connect external audio devices using the 3.5mm stereo [line-in port] on the speaker. The [line-out port] can be used to connect to other audio systems.
(Diagram shows connecting a device via a 3.5mm stereo cable.)
Microphone Input
Connect a microphone using the 6.3mm [microphone jack] to use the karaoke features.
(Diagram shows a microphone plugged into the 6.3mm jack.)
Guitar Input
Connect a guitar using the 6.3mm [guitar jack] to play through the speaker.
(Diagram shows a guitar plugged into the 6.3mm jack.)
7. USB Playback
Insert a USB drive into the [USB port] to play music files. The speaker supports USB 2.0 Full Speed and charging (5V, 1A). Maximum USB support is 128GB.
(Diagrams show a USB drive connected to the USB port and a phone connected for charging.)
Vocal Effects
Vocal Fader
Use the [Vocal fader control] to adjust the volume of the vocals. It can be turned On or Off.
(Diagrams show the vocal fader control being adjusted.)
Voice Changer
Select from different voice effects: Voice 1, Voice 2, Voice 3, Voice 4, or Voice Off, using the [voice changer control].
(Diagrams show the voice changer options.)
Specifications
| Feature | Specification |
|---|---|
| Amplifier AC Output Power (RMS) | 40W |
| Amplifier AC Output Power (Maximum) | 80W |
| Amplifier Battery Output Power | 15W |
| Frequency Response | 50Hz-20KHz,-12dB |
| Signal to Noise Ratio | > 65 dBA |
| Total Harmonic Distortion | < 1% |
| Speaker Impedance | 4 ohm |
| Sensitivity | 91 dB±3dB/m/W |
| USB Direct Version | 2.0 Full Speed |
| USB Charging Support | 5V, 1A |
| Bluetooth Version | V5.0 |
| Bluetooth Frequency Band | 2.402 GHz ~ 2.480 GHz ISM Band |
| Bluetooth Range | 10m (free space) |
| Battery Capacity | Built in rechargeable 7.4V 2200mAh |
| AC Power | 100-240V~, 50/60 Hz |
| Eco Standby Power Consumption | ≤ 0.5W |
| Dimensions (Main Unit WxHxD) | 309x460.5x322mm |
| Weight (Main Unit) | 6.95kg |
(Note: Power cord quantity and plug type vary by regions.)
Additional Information
This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
For the latest updates and documents, please visit www.philips.com/support.
(The document also contains regulatory information for Brazil (ANATEL) and mentions Bluetooth trademarks.)
