Philips SmartBright Solar Flood Light BVP080

Mounting Instruction

Product Specifications

Type Number	Flux (lm)	Battery Type	Battery Parameter	PV Parameter	Remote Distance	CCT	Ta	Weight	Luminous Area
BVP080 LED10/757 060 G2	1000lm	Lithium iron phosphate	3.2V/6AH (8W/5V)	infrared	≤ 8m	5700K	0-50℃	2.37Kg	0.029m²
BVP080 LED20/757 100 G2	2000lm	Lithium iron phosphate	3.2V/12AH (15W/5V)	infrared	≤ 8m	5700K	0-50℃	2.83Kg	0.029m²
BVP080 LED30/757 150 G2	3000lm	Lithium iron phosphate	9.6V/6AH (20W/15V)	infrared	≤ 8m	5700K	0-50℃	4.46Kg	0.073m²
BVP080 LED48/757 200 G2	4800lm	Lithium iron phosphate	9.6V/9.9AH (35W/15V)	infrared	≤ 8m	5700K	0-50℃	6.20Kg	0.073m²

Dimensions (Unit: mm)

TYPE	W	L	H	W1	L1	H1	L4	L2	d x a x b	L3	d1 x a1 x b1	L5
1000lm	200	200	60.4	350	235	15	200	180	8.5 x 15x8.5	100	8.5 x 15x8.5	4800
2000lm	200	200	60.4	350	350	15	200	180	8.5 x 15x8.5	100	8.5 x 15x8.5	4800
3000lm	300	300	63.5	350	450	15	200	180	8.5 x 15x8.5	100	8.5 x 15x8.5	4800
4800lm	300	300	63.5	350	680	15	200	180	8.5 x 15x8.5	100	8.5 x 15x8.5	4800

Mounting and Installation

The diagram shows the solar panel, luminaire, and mounting hardware. Ensure correct screw usage and torque:

M8 Screw: Torque 3.2Nm
M6 Screw: Torque 10Nm
M6 Screw: Torque 3.2Nm
M5 Screw

Application Notes

Initial Setup: Connect the solar panel cable to the luminaire to activate it with the factory default 'Auto' working mode. Then, use the remote control functions.
Sleep Mode: To enter sleep mode for storage, press the 'OFF' key. Wake up the luminaire by pressing the 'Auto' or 'ON' key.
LED Indicator: A solid green light indicates charging. A flashing green light indicates low battery capacity (<30%).
Solar Panel Installation: Install the solar panel on an open roof or wall facing the sun. The tilt angle can be adjusted. Ensure no light source is positioned above the solar panel at night, as it may interfere with the solar flood light's operation.
Initial Charging: Charge the product under sunlight for 8 hours before first use.
Mode Setting: After installation, operating modes can be set using the infrared remote controller.
Power Source: This product operates 100% on solar energy and requires no external electrical connections.
Detection: Dusk/dawn detection is based on the light intensity falling on the solar panel.
Temperature Impact: Battery backup performance may be reduced if the ambient temperature is below 0°C.
Low Battery Operation: When battery capacity is below 30%, the light output will dim to 15% to extend operating time.
Storage: Products can be stored for up to 6 months. For longer storage, recharge the product in bright daylight to maintain battery performance.
Lighting Profile: The lighting profile operates from dusk to dawn (maximum 12 hours) and is applicable for 3H/5H/8H working modes.
Usage: The operating position is universal, and the product is suitable for outdoor use.
Non-Replaceable Parts: The light source, control gear, and external flexible cable are not replaceable. If damaged, the entire luminaire must be replaced.
Disposal: Users should follow local regulations for the disposal, separation, and collection of electrical and electronic products and packaging. Do not dispose of old products and packaging with normal household waste. Proper disposal helps prevent potential negative environmental and health consequences. Batteries must be disposed of separately via designated collection facilities. Non-user replaceable batteries should be removed by a professional.

Remote Control Functions

Auto (Wake up): Luminaire lights from dusk to dawn (max 12 hours) according to the default lighting profile.
3H: Luminaire lights for 3 hours, then turns off.
5H: Luminaire lights for 5 hours, then turns off.
8H: Luminaire lights for 8 hours, then turns off.
On/OFF (Indoor Use): Turns the luminaire ON/OFF using the remote control, with 100% light output.
Dim Down: Reduces light output from 100% to 10%, in 10% steps. (Note: The luminaire will exit dim mode after 2 hours if in 'Auto' mode).
Dim Up: Increases light output from 10% to 100%, in 10% steps.

Lighting Profile

The lighting profile operates from dusk to dawn (maximum 12 hours) and is applicable for 3H/5H/8H working modes.

Period	Light Output	Duration
Period 1	20%	1 hour
Period 2	100%	30 min
Period 3	40%	1 hour
Period 4	20%	1.5 hours
Period 5	10%	2 hours
Period 6	5%	6 hours

Hazardous Substance Table (Applicable to China Only)

This table is prepared according to SJ/T 11364. '○' indicates the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572. '╳' indicates the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in GB/T 26572.

Component Name	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr(VI))	Polybrominated Biphenyls (PBB)	Polybrominated Diphenyl Ethers (PBDE)
LED board/light source	╳	○	○	○	○	○
Lens optical component	○	○	○	○	○	○
Driver (board), copper and electronic components	○	○	○	○	○	○
Housing and other components	○	○	○	○	○	○

	SmartBright Solar Flood Light BVP080 LED48/757 200 G2 Datasheet Technical specifications and product data for the Philips SmartBright Solar Flood Light, model BVP080 LED48/757 200 G2. Features include high luminous flux, lithium ferro phosphate battery, and durable aluminum construction.
	Philips SmartBright BVP080 LED48/757 200 G2 Solar Floodlight Technical Specifications Detailed technical specifications for the Philips SmartBright BVP080 LED48/757 200 G2 solar floodlight, including performance data, dimensions, and application conditions.
	Philips Essential SmartBright All-in-one Solar Pathway Light - Up to 4000 Lumens Discover the Philips Essential SmartBright All-in-one Solar Pathway Light, an integrated solar lighting solution with a Lithium Ferro Phosphate battery, solar panel, and charger. This energy-saving, environment-friendly light is ideal for walkways, pathways, amenities, and gardens, offering easy configurability and no external cabling.
	Philips CoreLine Waterproof WT120C G2 MDU - Installation and Technical Guide Comprehensive guide for the Philips CoreLine Waterproof WT120C G2 MDU luminaire, covering installation, specifications, sensor features, safety instructions, and compatibility information.
	Philips Essential SmartBright All-in-one Solar Pathway Light BRC010 LED40/765 - Technical Datasheet Comprehensive technical datasheet for the Philips Essential SmartBright All-in-one Solar Pathway Light (BRC010 LED40/765 kit Pro G2). Details include specifications, features, safety warnings, dimensions, and product identifiers for this solar-powered outdoor lighting solution.
	Philips SmartBright All-in-one Solar Street Light: Features, Specifications, and Applications Discover the Philips SmartBright All-in-one Solar Street Light, a versatile lighting solution offering up to 18000 Lumens with off-grid and hybrid options. This document details its features, technical specifications, applications, and dimensional drawings.
	Philips SmartBright Floodlight G2 BVP151 Datasheet \| 30W LED Comprehensive datasheet for the Philips SmartBright Floodlight G2 BVP151. Get detailed specifications, performance data, dimensions, and application conditions for this 30W, 3300lm LED floodlight.
	Philips Essential SmartBright Solar Wall Light BWS010 LED05/765 G2 Datasheet Explore the Philips Essential SmartBright Solar Wall Light (BWS010 LED05/765 G2). This datasheet provides detailed specifications, features, and application conditions for this outdoor solar lighting solution.