SKNSL P129-BK User Manual

Introduction

Thank you for purchasing this SKNSL product. Please read this manual carefully before use and keep it for future reference!

In the Box

Before using this product, please check whether the contents of the package are complete.

• P129-BK x 1
• Rechargeable Battery x 1
• Holster x 1
• Mini Keychain Flashlight x 1
• Lanyard x 1
• USB-C Charging Cable x 1
• AAA Battery Holder and Battery Tube x 1
• User Manual x 1

Product Overview

The flashlight features a USB-C charging port, a rear cover, a body, a switch (which also acts as a power indicator), and a head.

Operation

• Press the power switch to enter the high light mode.
• Press again to enter the medium light mode.
• Press the third time to enter the low light mode.
• Press the fourth time to enter the strobe mode.
• Press the fifth time to enter the SOS mode.
• Press the sixth time to turn off the power.
• In any mode, long-press and hold the switch for 2-3 seconds to turn off the light.

Charging

Before first use, please fully charge the product. An indicator light represents battery status:

• Power 25%: A blue light is constantly on.
• Power 50%: Two blue lights are constantly on.
• Power 75%: Three blue lights are constantly on.
• Power 100%: Four blue lights are constantly on.

Connect the USB-C charging cable with the light and a 5V/1A adapter to charge. It takes about 4-6 hours to fully charge the light (based on a 5V/1A adapter).

Make sure the rubber cap is covered well after charging is finished to ensure the IPX6 waterproof level.

Warnings

• Please read the user manual carefully before using the flashlight.
• Please don't shine into eyes directly to avoid harm to eyes.
• The product will generate heat while working; please be cautious to avoid any possible harm.
• Do not use a damaged or deformed battery, or one with a broken sleeve.
• This is not a diving product; please don't use it underwater for a long time.
• Fully charge the battery before storing the light for a long period.
• Please do not disassemble the flashlight, or it will not be covered by SKNSL warranty policy.

Battery Installation

When inserting the battery, please make sure the [positive terminal] faces towards the inside and the [negative terminal] faces towards the outside.

The flashlight can use either a rechargeable battery or AAA batteries (with the provided holder and tube).

Warranty Service

• 60-day money-back guarantee for any reason: For 60 days after the date of purchase, return your undamaged SKNSL product and receive a full refund for any reason.
• 24-month warranty for quality-related issues: For 24 months after the date of purchase, SKNSL will handle all quality-related issues with a replacement or refund.

Exclusion Clause

SKNSL is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

Notice

• When the flashlight is in use, it is necessary to ensure heat dissipation. If the flashlight gets hot, turn it off in time or allow it to cool down before use.
• Before charging, please ensure the battery is installed in the correct direction; otherwise, the flashlight may be damaged.
• When the flashlight indicates low power, please charge or replace the battery promptly to avoid affecting the battery's durability.
• Please do not mix old and new batteries, or batteries of different types and brands.
• Keep the inner wall of the lampshade clean. Do not wipe with your hands or hard objects. Use cotton swabs and professional tools to clean fingerprints on the lens.

FAQs

If you encounter any problems with the flashlight, you can contact SKNSL at any time for assistance.

Parameters

All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the flashlight.