Ultra Slim Magnetic Wireless Charging Power Bank

Specification

• Product: Ultra Slim Magnetic Wireless Charging Power Bank
• Model Name: VIONTA L10
• Battery Capacity: 10000mAh / 3.87V / 38.7Wh
• Input Power: USB-C: 5V/3A, 9V/2A, 12V/1.5A
• Output Power:
  • Wireless: 5W / 7.5W / 10W / 15W (iPhone up to 7.5W)
  • USB-C: 5V/3A, 9V/2.22A, 12V/1.67A
  • Wireless + USB-C: 5V/3A (15W max.)
• Operating Temperature: 0°C - 35°C
• Size: 102.8 x 66 x 14.4 mm
• Weight: 178 g
• Warranty: 1-Year Limited Warranty
• Origin: Made in China

Note: The product can only be used to charge smartphones / earbuds. Please refer to the user manual for instructions and more product information.

Product Introduction

Type: Magnetic Wireless Charger

Description: A diagram illustrating the Ultra Slim Magnetic Wireless Charging Power Bank, highlighting the USB-C port for input/output, a power button, and a hidden LED display.

LED Display Introduction

The LED display provides information on charging status:

• 1 Wireless Charge Indicator
• 2 Current Battery Indicator

Display States:

• Power on: Instant charging starts. Numbers and % symbol light up.
• Power off: Press twice briefly to turn off the power.
• USB-C input: Unit digit flashes.
• USB-C output: Numbers and % symbol light up.
• Wireless / Simultaneous charging: Digit and green lightning symbol light up.
• FOD (Foreign Object Detection): Lightning symbol flashes for 15 seconds then power turns off.

Charging Introduction

The power bank supports various charging methods:

1. Charge 1 device with magnetic attachment: Place the device onto the magnetic charging surface.
2. Charge 1 device with cable: Connect the device to the USB-C port using a cable.
3. Charge 2 devices simultaneously: Place one device on the magnetic charging area and connect another device via the USB-C port. This feature supports AirPods with a wireless charging case.

Protective Functions

• Multiple circuit protection ?️
• Over-current protection ⚡️
• Short-circuit protection ❌⚡️
• Over-voltage protection ⬆️⚡️
• Flame retardant protection ?
• Over-heat protection ?️

Attention

• Do not expose to liquids ?❌
• Do not shake while charging ⚠️
• Keep away from children ??
• Avoid extreme temperatures ?️❌
• Unplug the device when fully charged ✔️?
• Do not disassemble, puncture, drop, bend or modify ?❌

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.

Warranty and Support

Warranty: 1-Year Limited Warranty

For the fastest and safest charge, use an ADAM cable, your device's original cable, or a certified cable (such as MFi).

Packaging Contents: Éléments d'emballage

Certifications: FCC, CE, RoHS

Manufacturer: ADAM elements International Co., Ltd.

Website: www.adamelements.com

Support: support@adamelements.com | +886-2-2738-9900

Printed with Soy Ink