Instruction Manual for TEK STUDIO models including: 3Y, 3Y CyberPack Styling Steering Wheel, CyberPack Styling Steering Wheel, Styling Steering Wheel, Steering Wheel, Wheel
Parts List Parts List Drawing 1 1. CyberPack steering wheel 2. Accessory special tools 1. Tools required for installation Warping board, T20 screwdriver, adjustable wrench, H10 sleeve, flathead screwdriver, T10 screwdriver, auxiliary special tools Two, installation precautions Note: Please ensure that the power off operation, to prevent the failure of the airbag Tip: In order to install more quickly, please be sure to read the instructions carefully. Model 3Y CyberPack Styling Steering Wheel Disclaimers and Cautions Warnings and Disclaimers Important notice: Welcome to purchase the company's products, in order to protect the legitimate rights and interests of users, in this special reminder to users, please be sure to carefully read and fully understand the terms of this statement before using this product. If you use this product, your use behavior will be regarded as the acceptance of the entire content of this statement, and agree to accept the following terms of this statement, and bear the effect caused by irregular use of the payment. Hanxiao Company reserves the right to update the above documents. Please be sure to operate this product according to the instructions. P.S. This wiring harness, buttons, module shell, etc. are gifts and are not covered by our warranty. If the keys, harness, or module do not work, please use your own steering wheel accessories. Use Precautions 1. Check whether the product list is complete and damaged before installation. 2, the installation instructions may be slightly different from the actual operation. If there are any differences, please refer to the actual situation or contact us. 3, Warning: Do not disassemble any parts by yourself, any improper operation is not covered by the warranty. 4. Watch the installation video and instruction manual before installing the product. 5, pay attention to replacing the steering wheel, do not turn the spring, to prevent the spring from breaking. 6, check whether the installed product function is normal, if there is a problem, please check whether the plug is inserted tightly. 2 Model 3Y CyberPack Styling Steering wheel - Product selling point Year: 17+ M odel 3, 19+ M odel Y Name: M odel 3/Y Universal CyberPack Styling Steering Wheel (5/7 removal hole) M odel Y Universal CyberPack Styling Steering Wheel (6/6 removal hole) Left and right navigation: No distinction Processor: no distinction Product Features 1, installation: special car, non-destructive installation, does not affect the function of the original car 2, experience: three-dimensional design, visual enhancement, wide vision 3, Material: flower needle sewing process (manual fine sewing), top NAPPA leather material, deep breathable, delicate texture, soft luxury, wear resistance and aging resistance 4, Function: support heating function (original support) 5, color: a variety of fashion color optional (optional) Product Description Special car, 1:1 original car mold, non-destructive installation, does not affect the function of the original car. Using the steering wheel of the car shape, three-dimensional design (the overall sense of motion vision, enhance the field of view more open, do not block the dashboard, you can see the mobile phone navigation or dashboard display). The skeleton is made of aluminum alloy, the use of top NAPPA leather material combined with soft feel and no slip (deep breathable, comfortable feel, strong grip, sweat absorption and no slip, a clean stain), wear resistance and aging (bending and bending 200,000 times at room temperature, no crack 30,000 times at low temperature). The original process stitching line (according to the arc of the original car, manual fine sewing), the interface is perfectly fitted (no sewing thread is left on the surface), the craftsman spirit is smooth, the grip is more three-dimensional and more comfortable.. With heating function by default, the heating wheel needs to use the heating harness and module of the original car Note: A variety of fashion colors are available (as shown on the left) 3 Steering wheel product differences The wheel disassembly needs to pay attention to the hole position, and the disassembly hole position is different for different types of steering wheels. Exit holes located on both sides of the steering wheel (5/7 point removal holes) The exit hole is located on the lower side of the steering wheel (6-point removal hole) 4 Remove the original car steering wheel instructions 1, disassembling tools: warping board, T20 screwdriver, adjustable wrench, H10 sleeve, flat-head screwdriver, T10 screwdriver, complimentary tool (right) 2. Insert the complimentary special tool into the holes on the left and right sides of the steering wheel and open the airbag cover 3. Lift the airbag up (note that the wiring harness is not removed at this time) 5 4. Choose to turn off the power on the machine interface Remove the steering wheel instruction of the original car 5. Use the complimentary plug pulling professional tool to insert into the buckle and gently pull the wiring harness to pull out the airbag plug 6. Use the complimentary plug pulling professional tool to align with the buckle and gently pull the wiring harness to pull out the roller key plug 7. Use the H10 sleeve and adjustable wrench to unscrew the screw counterclockwise (you can hold both sides of the steering 6 wheel with your legs) 8. Take out the steering wheel after shaking it from side to side Remove the original car control box instructions 9. Use a flat-head screwdriver to pry open all 6 clip positions 10. Unscrew the four retaining screws with T20 11. Pry off the middle trim of the steering wheel with the warping board 7 12. Unplug the control box Replace the control box installation instructions 13. Remove the control box after unscrewing the 2 fixing screws with a T10 screwdriver 14. Break the two latches 15. Break the two clasps 8 16. Open the two clasps on the electronic board Replace the control box installation instructions 17. Take the electronic board up (note the dowel pins) 18. Install the removed original chip on the small control box The design of the small control box is more compact, and the chip needs to be carefully installed (it needs to be 9 tightly stitched). 20. Find the harness plug under the steering wheel of the new CyberPack The control box is installed into the CyberPack styling steering wheel instructions 21. Insert the blue plug into the newly replaced control box Remove the heating plug to facilitate the storage location of the subsequent control box 23, the control box first diagonally press down and then press it in above the press 10 24, the heating plug is plugged next to the control box Install CyberPack styling steering wheel instructions 25. Align with the hole and press down 26. Plug in the roller button 27. Use the H10 sleeve and adjustable wrench to tighten the set screws clockwise (one person can hold the sides of the steering 11 wheel with their knees) 28. Plug in the airbag Install steering wheel airbag instructions 29. Insert the airbag plug into the steering wheel 12 30. Align the three holes and press the airbag in Install steering wheel airbag instructions 31, installation complete 13 Model 3Y CyberPack Styling Steering Wheel - FAQ Troubleshooting Guide Questions Causes Solutions The reverse dotted line is not displayed correctly No alignment installed When installing the disk, the center groove should be well concave There is a gap between the key frame and the bare disk The buckle is not properly fixed Remove it and reinstall it Leather is dirty and don't know how to maintain it Long time use leads to Can be purchased online foam cleaning agent cleaning (not with corrosive, to prevent damage to the leather) Airbag cover can not The clasp is in a tight position After watching the installation video, find the open the problem appropriate tool to pry open the airbag cover The plug cannot be removed The plug has two slots Hold one slot with a flat-head screwdriver and remove the other slot with your finger Keys do not work The harness or plug is damaged Replace the wiring harness or plug of the original steering wheel 14 The fixing screws There's too much glue on the Avoid twisting the teeth, you can go to the serviceWPS 演示