Littfinski DatenTechnik KSM-SG-B Rov Qab Loop Module
Lub Littfinski DatenTechnik (LDT) Rov Qab-Loop Module yog ib feem ntawm Digital Professional Series thiab tau txheeb xyuas los ntawm Tshooj-No .: 700501.
Cov lus qhia ua ke
Txhawm rau sib sau ua ke Reverse-Loop Module, ua raws li cov lus qhia hauv qab no:
- Tshem cov khoom siv thiab xyuas kom meej tias tag nrho cov khoom muaj nyob.
- Ntxig lub Rov Qab-Loop Module rau hauv qhov chaw xaiv ntawm koj qhov system digital.
- Txuas cov xov hlau los ntawm txoj kev mus rau Reverse-Loop Module raws li cov lus qhia uas tau muab nrog koj lub kaw lus digital.
- Xyuas kom meej tias txhua qhov kev sib txuas muaj kev ruaj ntseg.
Cov lus qhia siv khoom
Lub Littfinski DatenTechnik (LDT) Rov Qab-Loop Module tso cai rau cov tsheb ciav hlau taug kev hauv ob qho tib si ntawm txoj kev khiav. Ua raws li cov lus qhia hauv qab no los siv Reverse-Loop Module:
- Hloov ntawm koj qhov system digital thiab xyuas kom meej tias nws txuas nrog Reverse-Loop Module.
- Muab koj lub tsheb ciav hlau tso rau ntawm txoj kev thiab tsav nws mus rau lub voj voog.
- Thaum lub tsheb ciav hlau nkag mus rau hauv lub voj, nws yuav cia li thim rov qab yam tsis muaj kev cuam tshuam.
- Lub tsheb ciav hlau tam sim no tuaj yeem txuas ntxiv mus ncig ntawm lub voj voog nyob rau sab nraud.
Nco tseg: Xyuas kom meej tias qhov Rov Qab-Loop Module raug teeb tsa kom raug thiab txhua qhov kev sib txuas tau ruaj ntseg ua ntej siv nws nrog koj lub tsheb ciav hlau teeb.
Kev thim rov qab ntawm lub voj voog rov qab yuav ua tau yam tsis muaj luv luv ntawm ob lub ntsuas hluav taws xob. Nrog rau vim li cas rau qhov muaj peev xwm muab hluav taws xob sab nraud yog ib qho yooj yim tswj ntawm qhov rov qab-voj nrog taug qab cov neeg nyob module (xws li RM-GB-8(-N) thiab RS-8) ua tau. Lub sensor rails yuav raug tswj thiab.
Cov khoom no tsis yog khoom ua si! Tsis haum rau cov menyuam yaus hnub nyoog qis dua 14 xyoos! Cov khoom siv muaj cov khoom me me, uas yuav tsum tau khaws cia deb ntawm cov menyuam yaus hnub nyoog qis dua 3 xyoos! Kev siv tsis raug yuav ua rau muaj kev phom sij ntawm kev raug mob vim cov npoo ntse thiab cov lus qhia! Thov khaws cov lus qhia no kom zoo zoo.
Taw qhia
Koj tau yuav cov khoom siv rau koj cov qauv kev tsheb ciav hlau uas tau muab tso rau hauv cov khoom ntawm Littfinski DatenTechnik (LDT). Cov khoom siv no yog cov khoom lag luam zoo uas yooj yim rau kev sib sau. Peb xav kom koj muaj sijhawm zoo rau kev sib dhos thiab siv cov khoom no.
General
Cov cuab yeej xav tau rau kev sib dhos
Thov nco ntsoov tias cov cuab yeej hauv qab no muaj:
- me me sab cutter
- ib tug mini soldering hlau nrog ib tug me me ntsis
- solder tin (yog tias ua tau 0.5mm txoj kab uas hla)
Cov lus qhia kev nyab xeeb
- Peb tsim peb cov cuab yeej siv rau sab hauv tsev nkaus xwb.
- Tag nrho cov khoom siv hluav taws xob thiab hluav taws xob muaj nyob rau hauv cov khoom siv no yuav tsum tau siv rau qhov qis qistage tsuas yog siv qhov kev sim thiab pom zoo voltage transducer (transformer). Tag nrho cov Cheebtsam yog rhiab heev rau cua sov. Thaum lub sij hawm soldering lub tshav kub yuav tsum tau siv rau lub sij hawm luv luv xwb.
- Cov hlau soldering tsim kom kub txog 400 ° C. Thov ua tib zoo mloog mus tas li rau lub cuab yeej no. Khaws qhov deb txaus rau cov khoom siv hluav taws xob. Siv lub ntsuas kub resistant rau txoj haujlwm no.
- Cov khoom siv no muaj cov khoom me me uas tuaj yeem nqos tau los ntawm cov menyuam yaus. Cov menyuam yaus (tshwj xeeb tshaj yog qis dua 3 xyoos) yuav tsum tsis txhob koom nrog lub rooj sib txoos yam tsis muaj kev saib xyuas.
Teeb tsa
Rau lub rooj sib txoos-them thov ua raws nraim li cov kab ke ntawm cov npe hauv qab no. Hla txhua txoj kab tawm raws li ua tiav tom qab ua tiav qhov kev ntxig thiab qhov sib txuas ntawm qhov txuas. Rau cov diodes thiab zener diodes thov ceev tshwj xeeb rau qhov tseeb polarity (cim kab rau cathode). Nrog rau qhov sib txawv ua rau electrolytic capacitors koj yuav pom cov cim sib txawv ntawm polarity. Qee qhov cim nrog "+" thiab qee qhov cim nrog "-". Txhua lub capacitor yuav tsum tau sib sau ua ke rau lub rooj tsavxwm uas lub cim ntawm lub capacitor yog nyob rau hauv kev sib raug zoo nrog cov cim ntawm lub pc-board.
Integrated circuits (IC's) yog cim nrog ib nrab puag ncig thais ntawm ib kawg los yog ib qho chaw luam tawm rau qhov tseeb mounting txoj hauj lwm. Thawb lub IC mus rau hauv lub qhov (socket) kom raug lossis ncaj qha mus rau hauv lub pc-board (IC3) kom ntseeg tau tias qhov thais lossis cov ntawv luam tawm yog sib haum rau cov cim ib nrab ntawm lub pc-board. Thov mus koom rau qhov rhiab heev ntawm IC's rau electrostatic tawm uas yuav ua rau muaj kev puas tsuaj tam sim ntawm IC. Ua ntej kov cov khoom no thov tso koj tus kheej los ntawm kev tiv tauj ib qho hlau hauv av (xws liample ib lub tshuab hluav taws xob hauv av) lossis ua haujlwm nrog cov ntaub ntawv pov thawj electrostatic.
Thov mus rau lub cim "+" ntawm cov rectifiers. Qee cov tuam txhab lag luam kos cov "+" txuas ntxiv nrog cov xaim txuas ntev dua. Yog hais tias lub rectifier qhia tau hais tias yog cim ib sab flattened sab no yuav tsum sib haum nrog cov cim ntawm lub pc-board. Cov clamps KL1 rau KL4 yuav tsum tau txuas nrog lub thaiv nrog 8 kev sib txuas.
Sau npe
| Pos. | Qty. | Cheebtsam | Lus hais | Ref. | Ua tiav |
| 1 | 1 | Printed Circuit Board | |||
| 2 | 1 | Z-Diode BZX… 5V1 | koom rau lub polarity! | D1 | |
| 3 | 5 | Tom ntej: Diodes 1N4003 | koom rau lub polarity! | D2, D6 | |
| 4 | 1 | Z-Diode BZX 30 | koom rau lub polarity! | D7 | |
| 5 | 1 | Resistor 820Ohm | grey-liab-dub-dub | R1 | |
| 6 | 2 | Resistor 1,5 kOhm | xim av-ntsuab-dub-xim av | R2, R3 | |
| 7 | 1 | Resistor 220 kOhm | liab-liab-dub-txiv kab ntxwv | R4 | |
| 8 | 1 | Resistor 1MOhm | xim av-dub-dub-daj | R5 | |
| 9 | 2 | Capacitor 100nF | 100 nF = 104 | C3, C4 | |
| 10 | 2 | IC-Sockets 18 ncej | IC 1, IC 2 | ||
| 11 | 1 | IC-Socket 8 ncej | IC4 | ||
| 12 | 1 | PIB: 814 | koom rau lub polarity! | IC3 | |
| 13 | 1 | Resonator | TIAB SA 1 | ||
| 14 | 1 | Electrolytic cap. 100μF / 25V | koom rau lub polarity! | C2 | |
| 15 | 1 | Electrolytic cap. 470μF / 35V | koom rau lub polarity! | C1 | |
| 16 | 1 | Rectifier | koom rau lub polarity! | SIB 1 | |
| 17 | 1 | Multi Fuse R050 | TIAB SA 1 | ||
| 18 | 3 | Relay | REL1..3 | ||
| 19 | 4 | Clamps 2 luj | tsim blocks ua ntej assy. | KL1, KL4 | |
| 20 | 1 | Clamp 2 ncej | wb 5 | ||
| 21 | 1 | IC: Z86E0..PSG | koom rau lub polarity! | IC1 | |
| 22 | 1 | Qauv: ULN2803A | koom rau lub polarity! | IC2 | |
| 23 | 1 | IB: 93C46 | koom rau lub polarity! | IC4 | |
| Kev tswj kawg |
Kev qhia soldering
Muab rau koj tsis muaj kev paub tshwj xeeb hauv cov khoom siv hluav taws xob soldering thov nyeem ua ntej no cov lus qhia soldering ua ntej pib txoj haujlwm. Soldering yuav tsum tau kawm!
- Tsis txhob siv cov fluxes ntxiv rau cov khoom siv hluav taws xob uas muaj cov kua qaub (xws li zinc chloride lossis ammonium chloride). Cov no tuaj yeem rhuav tshem cov khoom thiab cov ntawv luam tawm thaum tsis ntxuav tawm tag nrho.
- Raws li cov khoom siv tsuas yog cov hlau lead dawb nrog cov rosin core rau fluxing yuav tsum tau siv.
- Siv cov hlau me me nrog lub zog max 30 Watt cua sov. Lub taub hau solder yuav tsum tsis pub dawb los ntawm qhov ntsuas kom paub tseeb tias qhov kub hloov mus rau qhov chaw yuav tsum tau soldered.
- Lub soldering yuav tsum tau ua nyob rau hauv ib txoj kev ceev ceev vim hais tias lub tshav kub hloov mus ntev yuav ua kom puas lub Cheebtsam. Ntau los yog ntev cua sov tuaj yeem tshem tawm cov ntaub qhwv thiab tooj liab los ntawm lub rooj tsavxwm.
- Rau ib tug zoo soldering ib tug zoo tinned solder-ntsia yuav tsum tau coj nyob rau hauv kev sib cuag mus rau lub tooj liab-pad thiab cov tivthaiv hlau nyob rau tib lub sij hawm. Ib txhij me ntsis solder-tin yuav tsum tau thov rau cua sov. Thaum lub solder-tin pib melting lub tin hlau yuav tsum tau muab tshem tawm. Tsuas yog tos kom txog thaum lub tin tau zoo wetted lub ncoo thiab cov hlau thiab tshem tawm cov hlau soldering kom deb ntawm qhov chaw soldering.
- Nco ntsoov tsis txhob txav cov khoom siv uas tsuas yog siv rau li 5 vib nas this tom qab tshem cov hlau soldering. Qhov no yuav tsum tsim ib qho nyiaj ci ntsa iab faultless soldering sib koom ua ke.
- Rau qhov tsis muaj kev sib koom ua ke thiab ua tau zoo soldering yog ib qho huv si uas tsis muaj oxidized soldering-ntsis xav tau kiag li. Nws tsis tuaj yeem ua ib qho kev sib koom ua ke txaus nrog cov lus qhia qias neeg. Yog li thov ntxuav lub taub hau los ntawm cov khoom siv ntau dhau-tin thiab av los ntawm kev siv daim txhuam cev ntub dej los yog silicone tu ncoo tom qab txhua txheej txheem soldering.
- Tom qab ua tiav ntawm kev sib txuas tag nrho cov xov hlau sib txuas yuav tsum tau txiav tawm ncaj qha saum qhov sib koom ua ke los ntawm kev siv ib sab cutter.
- Los ntawm soldering semiconductors (transistors, diodes), LED's thiab IC's yog qhov tseem ceeb heev tsis txhob dhau lub sijhawm soldering ntawm 5 vib nas this los tiv thaiv kev puas tsuaj ntawm cov khoom. Nws yog qhov yuav tsum tau mus koom rau qhov tseeb polarity ntawm cov khoom ua ntej pib txheej txheem soldering.
- Tom qab lub rooj sib txoos ua tib zoo tswj lub pc-board hais txog qhov raug tso ntawm cov khoom thiab qhov tseeb polarity. Thov xyuas yog tias tsis muaj kev sib txuas lossis tooj liab lem yog qhov luv luv Circuit Court los ntawm soldering tin. Qhov no tuaj yeem tsis tsuas yog ua rau lub cev tsis ua haujlwm, tab sis kuj ua rau kev puas tsuaj ntawm cov khoom kim heev.
- Thov nco ntsoov tias kev sib txuas tsis raug, kev sib txuas tsis raug, kev ua haujlwm tsis raug lossis kev sib dhos tsis raug cai tsis yog ib qho teeb meem hauv peb qhov kev cuam tshuam.
General installation cov ntaub ntawv
Kev sib cuag-xaim ntawm cov resistors thiab diodes yuav tsum tau sib sau ua ke nyob rau hauv ib tug dag txoj hauj lwm yuav tsum tau khoov nyob rau hauv raws li lub raster nrug mus rau hauv ib tug txoj cai angular txoj hauj lwm thiab sib sau ua ke rau hauv lub bores uas tau teev tseg (raws li lub rooj sib txoos lub hom phiaj los yog lub rooj sib txoos cim). Txhawm rau tiv thaiv cov khoom yuav tsis poob los ntawm kev tig-tshaj lub pc-board thov khoov cov xov hlau sib txuas ntawm 45 ° sib nrug thiab ua tib zoo muab lawv ua tib zoo rau cov ntaub qhwv tooj liab nyob rau sab nraub qaum ntawm lub rooj tsavxwm. Thaum kawg, cov xov hlau ntau dhau yuav tsum raug txiav tawm nrog lub tshuab txiav me me.
Cov resistors nyob rau hauv cov khoom siv yog hlau-foil resistors. Cov no muaj kev kam rau siab ntawm 1% thiab cim nrog xim av "tolerance-ring". Lub nplhaib tolerance tuaj yeem txheeb xyuas los ntawm cov npoo loj dua raws li qhov kev ncua deb dua rau lwm plaub lub nplhaib. Feem ntau muaj tsib lub nplhaib ntawm cov hlau-txheej resistors. Txhawm rau nyeem cov xim xim koj yuav tsum nrhiav qhov resistor li ntawd tias lub nplhaib xim av yuav nyob rau sab xis. Cov rings xim yuav liab tam sim no los ntawm sab laug mus rau sab xis! Thov saib xyuas kom sib sau diodes nrog qhov tseeb polarity (txoj hauj lwm ntawm cathode marking). Saib xyuas lub sijhawm luv luv heev! Tib yam yuav siv tau rau cov transistors thiab kev sib koom ua ke (IC's). Lub tiaj tiaj ntawm cov transistors yuav tsum sib haum nrog cov cim ntawm pcboard.
Lub transistor ob txhais ceg yuav tsum tsis txhob sib sau ua ke nyob rau hauv ib tug hla txoj hauj lwm. Ntxiv rau cov khoom no yuav tsum muaj qhov deb li ntawm 5 hli rau lub rooj tsavxwm. Mus koom rau lub sijhawm luv luv los tiv thaiv kev puas tsuaj ntawm cov khoom siv los ntawm cov cua sov ntau dhau. Cov capacitors yuav tsum tau sib sau ua ke rau hauv cov cim bores, cov xov hlau yuav tsum tau khoov me ntsis sib nrug thiab ceev faj soldered rau tooj liab ncoo. Los ntawm kev sib dhos ntawm electrolytic capacitors (electrolytic cap) nws yuav tsum tau mus koom rau qhov tseeb polarity (+,-)! Tsis yog-txoj kev soldered electrolytic capacitors tuaj yeem tawg thaum thov! Yog li ntawd nws yog ib qho tseem ceeb heev uas yuav tau xyuas qhov tseeb polarity ob- los yog zoo dua peb zaug. Tsis tas li ntawd nws yuav tsum tau mus koom rau qhov tseeb capacitor qhov tseem ceeb, piv txwv li n10 = 100pF (tsis yog 10nF!).
Kev ua tib zoo sib dhos thiab huv si yuav txo tau qhov ua tau tias txhua yam yuav tsis ua haujlwm raug. Tshawb xyuas txhua kauj ruam thiab txhua qhov sib koom ua ke ob zaug ua ntej ua tiav! Mus koom nrog cov npe sib dhos! Ua cov kauj ruam piav qhia tsis txawv thiab tsis txhob hla ib kauj ruam! Kos txhua kauj ruam raws li ua tiav ntawm kab lus pom tom qab sib dhos thiab ua tib zoo xyuas. Siv koj lub sijhawm. Kev ua haujlwm ntiag tug tsis yog ib qho haujlwm vim tias lub sijhawm rau kev ua haujlwm zoo sib dhos yog tsawg dua qhov kev kuaj xyuas qhov txhaum loj.
Kev sib dhos zaum kawg
Cov qhov (sockets thiab integrated circuits) (IC's) ntawm cov khoom siv yuav raug muab tso rau ntawm ib daim npuas kom paub tseeb tias kev thauj mus los nyab xeeb. Cov npuas dej no yuav tsum tsis txhob siv hauv qab lossis nruab nrab ntawm cov khoom siv vim tias cov npuas dej no yog cov khoom siv hluav taws xob. Nyob rau hauv rooj plaub uas cov khoom siv yuav raug coj mus ua haujlwm, cov khoom siv hluav taws xob tuaj yeem tsim lub voj voog luv luv thiab rhuav tshem cov khoom tiav. Txawm li cas los xij, kev ua haujlwm ntawm module yuav tsis ua raws li qhov xav tau.
Warranty
Raws li peb tsis muaj kev cuam tshuam rau kev sib dhos kom raug thiab raug, peb yuav tsum txwv peb qhov kev lav phib xaub rau cov khoom tiav thiab qhov tsis zoo ntawm cov khoom. Peb lav qhov kev ua haujlwm ntawm cov khoom raws li cov txiaj ntsig tau pom nyob rau hauv qhov tsis sib xws ntawm cov khoom thiab kev ua raws li cov ntaub ntawv kev siv hluav taws xob los ntawm kev koom nrog cov lus qhia txog kev sib txuas thiab cov lus qhia pib ua haujlwm ntawm lub module nrog rau kev sib txuas. thiab kev ua haujlwm. Tsis tau txais kev thov ntxiv. Peb tsis tau txais kev lav phib xaub lossis kev lav phib xaub rau kev puas tsuaj lossis kev puas tsuaj txuas mus ntxiv rau cov khoom no. Peb tseg peb txoj cai rau kev kho, rov ua dua, muab kev hloov lossis rov qab cov nqi yuav khoom.
Cov txheej txheem hauv qab no yuav ua rau tsis kho raws li qhov poob ntawm txoj cai thov raws li lav:
- yog tias cov kua qaub uas muaj cov tin lossis fluxes nrog cov ntsiab lus corrosive thiab lwm yam tau siv
- yog tias cov khoom siv tau raug soldered los yog sib sau ua ke
- los ntawm kev hloov pauv lossis kho-kev sim ntawm lub cuab yeej
- los ntawm nws tus kheej kev hloov kho Circuit Court
- los ntawm kev tsim kho ntawm cov khoom siv tsis zoo uas tsis yog kev hloov pauv ntawm cov khoom siv, kev xaim dawb ntawm cov khoom thiab lwm yam.
- daim ntawv thov ntawm lwm cov khoom siv uas tsis yog thawj zaug
- los ntawm kev puas tsuaj ntawm tooj liab lem los yog soldering tooj liab pads ntawm lub rooj tsavxwm
- los ntawm kev sib dhos tsis ncaj ncees lawm thiab kev puas tsuaj los ntawm sub sequential
- overloading lub module
- los ntawm kev puas tsuaj los ntawm kev cuam tshuam ntawm cov neeg txawv teb chaws
- los ntawm kev puas tsuaj los ntawm kev tsis saib xyuas phau ntawv ua haujlwm raws li txoj kev npaj sib txuas
- los ntawm kev sib txuas tsis ncaj ncees lawm voltage raws li tsis ncaj ncees lawm tam sim no
- los ntawm tsis ncaj ncees lawm polarity kev twb kev txuas ntawm lub module
- los ntawm kev ua haujlwm tsis raug lossis kev puas tsuaj los ntawm kev siv tsis saib xyuas lossis kev tsim txom
- los ntawm qhov tsis xws luag tshwm sim los ntawm kev sib txuas los yog tsis ncaj ncees lawm fuses.
Tag nrho cov xwm txheej zoo li no yuav ua rau rov qab cov khoom siv rau koj cov nuj nqis.
Raws li kev hloov pauv thiab ua yuam kev. 05/2013 by LDT
Hu rau
Ua nyob teb chaws Europe los ntawm
- Littfinski DatenTechnik (LDT)
- Bühler electronics GmbH Ulmenstraße 43 15370 Fredersdorf / Lub teb chaws Yelemees
- Xov tooj: +49 (0) 33439/867-0
- Internet: www.ldt-infocenter.com
Raws li kev hloov pauv thiab ua yuam kev. 09/2022 by LDT
Cov ntaub ntawv / Cov ntaub ntawv
 |
Littfinski DatenTechnik KSM-SG-B Rov Qab Loop Module [ua pdf] Phau ntawv qhia KSM-SG-B Rov Qab Loop Module, KSM-SG-B, Rov Qab Loop Module, Loop Module, Module |
