LIGHTWARE HT080 Multiport Matrix Switcher

Cov ntaub ntawv khoom

Specifications

• Qauv: MMX8x8-HT080
• Pem hauv ntej View Nta:
  • 1 USB chaw nres nkoj
  • 2 POWER LED
  • 3 LIVE LED
  • 4 LCD npo
  • 5 Jog dial pob qhov rooj
• Qab View Nta:
  • 1 AC connector
  • 2 HDMI inputs
  • 3 Audio I/O ports
  • 4 TPS cov zis
  • 5 Khau raj khawm
  • 6 Tswj Ethernet chaw nres nkoj
  • 7 Rov pib dua khawm
  • 8 RS-232 chaw nres nkoj
  • 9 Serial / Infra tso zis
  • q Infra tso zis
• Tau tshaj Cov khoom siv: Cov khoom siv teeb pom kev zoo TPS, matrix TPS thiab TPS2 boards, 25G boards, thiab lwm tus neeg sab nrauv HDBaseT extenders (tsis sib xws nrog phased-out TPS-90 extenders)
• Lub zog nkag: Txheem IEC connector txais 100-240 V, 50 lossis 60 Hz
• Qhov Loj: 2U-siab thiab ib-rack dav

Cov lus qhia siv khoom

Pem Hauv Ntej Vaj Huam Sib Luag Menu Navigation

Txhawm rau xauj cov ntawv qhia zaub mov pem hauv ntej thiab nkag mus rau cov chaw yooj yim:

1. Tig lub jog dial knob mus rau cov ntawv qhia zaub mov.
2. Nyem rau ntawm qhov xav tau los kuaj lossis hloov nws.

Mounting Options - Txheem Rack Installation

Rau mount MMX8x8-HT080 raws li tus qauv khib chav tsev installation:

1. Txuas lub pob ntseg pob ntseg rau sab laug thiab sab xis ntawm lub cuab yeej.
2. Siv cov ntsia hlau loj kom zoo los tuav lub pob ntseg khib rau lub tsheb ciav hlau.
3. Xyuas kom tseeb tias qhov tsawg kawg ntawm ob lub xov yog sab laug tom qab zawm cov screws.

Qhov cua

Xyuas kom muaj qhov cua zoo rau MMX8x8-HT080 los ntawm kev tawm tsawg kawg ob txoj xov ntawm qhov chaw nruab nrab ntawm lub cuab yeej thiab cov khoom nyob ib sab.

Cov lus qhia txog kev nyab xeeb tseem ceeb

Thov nyeem cov ntaub ntawv qhia kev nyab xeeb ua ntej siv cov khoom thiab khaws cia rau yav tom ntej siv.

FAQ (Cov lus nug nquag nug)

Q: Cov khoom siv twg tau tshaj MMX8x8-HT080?

• A: MMX8x8-HT080 yog sib xws nrog rau lwm yam Lightware TPS li, matrix TPS thiab TPS2 boards, 25G boards, nrog rau peb tog HDBaseT-extenders. Txawm li cas los xij, nws tsis sib xws nrog cov txheej txheem tawm TPS-90 txuas ntxiv.

Q: Qhov ntev ntawm MMX8x8-HT080 yog dab tsi?

• A: MMX8x8-HT080 yog 2U-siab thiab ib lub khib dav.

Q: Yuav ua li cas kuv thiaj li mus rau pem hauv ntej vaj huam sib luag zaub mov?

• A: Txhawm rau taug qab cov ntawv qhia zaub mov pem hauv ntej, tig lub pob khawm khawm kom xauj cov ntawv qhia zaub mov thiab nyem rau ntawm yam khoom xav tau los xyuas lossis hloov nws.

Q: Yuav ua li cas kuv yuav mount MMX8x8-HT080 nyob rau hauv tus txheej txheem khib?

• A: Txhawm rau mount MMX8x8-HT080 nyob rau hauv tus qauv khib, muab lub pob ntseg muab tso rau sab laug thiab sab xis ntawm lub cuab yeej siv cov ntsia hlau loj loj. Xyuas kom tseeb tias qhov tsawg kawg ntawm ob lub xov yog sab laug tom qab zawm cov screws.

Q: Kuv yuav ua li cas thiaj ua tau qhov cua zoo rau MMX8x8-HT080?

• A: Txhawm rau kom muaj qhov cua zoo, tawm tsawg kawg yog ob txoj xov ntawm qhov chaw nruab nrab ntawm MMX8x8-HT080 thiab txhua yam khoom nyob ib sab.

Cov lus qhia txog kev nyab xeeb tseem ceeb

Thov nyeem cov ntaub ntawv qhia kev nyab xeeb ua ntej siv cov khoom thiab khaws cia rau yav tom ntej siv.

Taw qhia

• MMX8x8-HT080 yog ib qho kev hloov matrix standalone muab yim HDMI video inputs thiab yim TPS video outputs. Ntxiv analog audio input thiab output connectors tso cai rau embed lub suab sib txawv nyob rau hauv lub HDMI kwj los yog tawg tawm lub suab teeb liab los ntawm lub HDMI kwj ntawm cov zis. 4K / UHD (30Hz RGB 4: 4: 4, 60Hz YCbCr 4: 2: 0), 3D muaj peev xwm thiab HDCP tau txais kev txhawb nqa tag nrho. Lub matrix yog sib xws nrog HDMI 1.4 tus qauv. Lub feature tso cai rau hloov video signals mus txog 4K @ 30Hz 4: 4: 4 xim qhov chaw los ntawm ib qho kev tawm tswv yim rau txhua qhov tso zis.

Compatible Devices

• Lub MMX8x4-HT420M matrix yog sib xws nrog lwm yam Lightware TPS li, matrix TPS thiab TPS2 boards, 25G boards, raws li zoo raws li lwm-tog HDBaseT-extenders, tab sis tsis tau tshaj cov phased-tawm TPS-90 extenders.
• HDBaseTTM thiab HDBaseT Alliance logo yog cov cim lag luam ntawm HDBaseT Alliance.

Pem hauv ntej view

1. USB chaw nres nkoj USB mini-B chaw nres nkoj rau kev tswj lub tsev hauv zos los ntawm Lightware Device Controller software.
2. HWJ HUAM LED ntawm lub hwj chim LED qhia tias chav tsev yog powered on.
3. LUB LIVE LED blinking maj mam Lub tsev nyob rau thiab ua haujlwm zoo.
   • blinking ceev Lub tsev yog nyob rau hauv bootload hom.
4. LCD npo Qhia cov ntawv qhia zaub mov pem hauv ntej. Kev teeb tsa yooj yim muaj.
5. Jog dial knob Xauj cov ntawv qhia zaub mov los ntawm tig lub pob qhov rooj, thiab nyem rau ntawm yam khoom xav tau los xyuas lossis hloov nws.

Mounting Options - Txheem Rack Installation

Ob lub pob ntseg khib yog muab nrog cov khoom, uas yog tsau rau sab laug thiab sab xis raws li qhia hauv daim duab. Lub neej ntawd txoj hauj lwm tso cai rau mounting lub cuab yeej raws li tus qauv khib chav tsev installation.

• Lub matrix switcher yog 2U-siab thiab ib-rack dav.
• Ib txwm siv tag nrho plaub lub hau ntswj txhawm rau txhim kho lub pob ntseg ntawm lub cuab yeej rau lub racks. Xaiv cov qhov loj me kom zoo rau kev mounting. Khaws qhov tsawg kawg nkaus ntawm ob txoj hlua sab laug tom qab lub txiv ntoo ntsia hlau.

Qhov cua

• Txhawm rau kom muaj qhov cua kom raug thiab zam kom tsis txhob muaj cua sov, tawm qhov chaw dawb txaus nyob ib ncig ntawm lub cuab yeej. Tsis txhob npog cov khoom siv, tawm hauv qhov cua qhov chaw dawb ntawm ob sab.

Qab view

1. AC connector Standard IEC connector txais 100-240 V, 50 los yog 60 Hz.
2. HDMI inputs HDMI input ports (4x) rau qhov chaw.
3. Audio I/O ports 5-ncej Phoenix connector rau sib npaug analog suab; nyob ntawm qhov kev teeb tsa, nws tuaj yeem yog cov tswv yim lossis tso tawm. Cov zis suab yog qhov de-embedded HDMI teeb liab los ntawm qhov chaw nres nkoj HDMI nyob ze.
4. TPS outputs RJ45 connectors (8x) rau tawm TPS teeb liab; PoE-ua raws.
5. Khau raj khawm Resetting lossis powering ntawm lub cuab yeej thaum tuav lub khawm zais cia tso lub matrix hauv bootload hom.
6. Tswj Ethernet chaw nres nkoj RJ45 txuas los tswj cov matrix ntawm LAN.
7. Pib dua khawm Reboots lub matrix; tib yam li hloov nws tawm thiab rov ua dua.
8. RS-232 chaw nres nkoj 3-ncej Phoenix connectors (2x) rau kev sib txuas lus RS-232.
9. Serial/Infra outputs 2-ncej Phoenix connectors (2x) rau IR tso zis los yog TTL tso zis serial teeb liab.
10. Infra outputs 3.5 hli TRS (Jack) plugs rau infra teeb liab kis tau tus mob.
11. Relay 8-ncej Phoenix connectors rau relay ports.
12. GPIO 8-ncej Phoenix connector rau configurable general hom phiaj input / output ports.
13. Ethernet chaw nres nkoj Xauv RJ45 connector rau Ethernet kev twb kev txuas rau matrix.
14. TPS Ethernet Xauv RJ45 connectors los muab Ethernet kev sib txuas lus rau TPS kab - lawv tuaj yeem raug cais tawm ntawm LAN kev sib txuas lus (tswj kev ua haujlwm) ntawm matrix. Tsis ua raws li PoE.

• Cov infrared emitter thiab detector units yog optionally muaj accessories.

Cov ntsiab lus ntawm lub thawv

Qhov cua

• Txhawm rau kom muaj qhov cua kom raug thiab zam kom tsis txhob muaj cua sov, tawm qhov chaw dawb txaus nyob ib ncig ntawm lub cuab yeej.
• Tsis txhob npog cov khoom siv, tawm hauv qhov cua qhov chaw dawb ntawm ob sab.

Serial Output Voltage Qib (TTL thiab RS-232)

	TTL*	RS-232
Logic qis qib	0v 0.25	3 v.. 15 v
Logic siab qib	4.75v 5.0	-15 V.. -3 V

• Siv lub receiver nrog tsawg kawg yog 1k impedance rau ib qho voltage ntawm 0V thiab 5V kom tau txais voltages, tab sis tsis sib xws nrog cov phased tawm TPS-90 extenders.

Ethernet Txuas rau TPS inputs thiab TPS outputs

• TPS kab tsis xa cov teeb liab Ethernet, tab sis lawv tuaj yeem kis tau ntawm TPS cov tswv yim thiab cov chaw nres nkoj tawm, yog tias muaj kev sib txuas ntawm lub cev ntawm lub motherboard thiab cov tswv yim lossis cov khoom siv tawm.
• Qhov no ua rau nws muaj peev xwm tswj tau lub cuab yeej thib peb lossis muab Ethernet ntawm TPS.

Txuas ib thaj cable ntawm

• Ethernet Txuas rau TPS inputs thiab TPS inputs Ethernet sau npe RJ45 connectors los yog
• Ethernet Txuas rau TPS outputs thiab TPS outputs Ethernet sau npe RJ45 connectors los tsim ib qhov txuas.

Chaw taws teeb fais fab (PoE 48V)

• Lub matrix yog PoE-tshaj (raws li IEEE 802.3af tus qauv) thiab muaj peev xwm xa cov hluav taws xob tej thaj chaw deb mus txuas nrog TPS li ntawm TPS kev twb kev txuas (los ntawm CATx cable).
• Tsis xav tau lub zog hluav taws xob hauv zos rau qhov txuas nrog PoE-tshaj TPS extender. Lub PoE 48V feature tau qhib rau ntawm TPS cov chaw nres nkoj raws li lub Hoobkas pib.

Txuas cov kauj ruam

• CATx Txuas lub HDBase-TTM -compatible transmitter lossis matrix output board rau TPS input chaw nres nkoj. PoE-ua raws.
• HDMI Txuas lub HDMI qhov chaw (xws li PC) mus rau qhov chaw nres nkoj HDMI input.
• HDMI Txuas lub HDMI dab dej (xws li projector) mus rau HDMI tso zis chaw nres nkoj.
• Suab Optionally rau analog tso zis chaw nres nkoj: txuas ib lub suab (xws li suab amplifier) ​​mus rau lub analog audio output chaw nres nkoj los ntawm lub suab cable.
• Suab Optionally rau suab input: txuas lub suab (xws li media player) mus rau lub suab input chaw nres nkoj los ntawm lub suab cable.
• USB Optionally txuas lub USB cable txhawm rau tswj cov matrix switcher ntawm Lightware Device Controller software.
• LAN Optionally txuas UTP cable (ncaj lossis hla, ob qho tib si tau txais kev txhawb nqa) txhawm rau tswj cov matrix switcher ntawm Lightware Device Controller software.
• Relay Optionally rau relays: txuas ib tug tswj ntaus ntawv (xws li ib tug projection screen) rau lub relay chaw nres nkoj.
• IR Optionally txuas lub infra emitter mus rau infra tso zis chaw nres nkoj (2-ncej Phoenix los yog 1/8 "Stereo Jack connector) xa infra teeb liab.
• GPIO Optionally txuas ib tug maub los / tswj ntaus ntawv (xws li khawm vaj huam sib luag) rau GPIO chaw nres nkoj.
• Hwj chim Txuas lub hwj huam qaum rau AC lub qhov hluav taws xob rau lub matrix unit.
• Fais fab lub cuab yeej raug pom zoo raws li cov kauj ruam kawg.

Daim Ntawv Qhia Kev Siv Hluav Taws Xob rau RS-232 Cov Ntaub Ntawv Xa Mus

MMX8x4 series matrix yog tsim nrog 3-ncej Phoenix connector. Saib tus examples hauv qab no ntawm kev txuas mus rau DCE (Data Circuit-terminating Equipment) lossis DTE (Data Terminal

Khoom siv) hom ntaus ntawv:

• Yog xav paub ntxiv txog cov kab hluav taws xob, saib cov neeg siv phau ntawv ntawm lub cuab yeej lossis Cable Wiring Guide ntawm peb webqhov chaw www.lightware.com/support/guides-and-white-papers.

Software Control - Siv Lightware Device Controller (LDC)

• Cov cuab yeej tuaj yeem tswj tau los ntawm lub khoos phis tawj siv Lightware Device
• Controller software. Daim ntawv thov muaj nyob ntawm www.lightware.com, nruab nws ntawm Windows PC lossis macOS thiab txuas rau lub cuab yeej ntawm LAN, USB, lossis RS-232.

Firmware Update

• Lightware Device Updater 2 (LDU2) yog ib qho yooj yim thiab xis txoj hauv kev kom koj lub cuab yeej hloov tshiab. Tsim kom muaj kev sib txuas rau lub cuab yeej ntawm
• Ethernet. Rub tawm thiab nruab LDU2 software los ntawm lub tuam txhab webqhov chaw www.lightware.com, qhov twg koj tuaj yeem pom cov pob firmware tshiab kawg thiab.

Pin Assignment ntawm 2-ncej IR Emitter Connector (1/8 "TS)

1. Cov lus qhia +5V
2. Nplhaib
   • Teeb liab (active low)
3. Lub tes tsho

Suab Cable Wiring Guide

MMX8x4 series matrix yog tsim nrog 5-ncej Phoenix input thiab tso zis connectors. Saib ob peb examples hauv qab no feem ntau assembling rooj.

Daim ntawv thov

• IP chaw nyob Dynamic (DHCP yog enabled)
• RS-232 chaw nres nkoj teeb tsa 57600 BAU, 8, N, 1
• Tswj raws tu qauv (RS-232) lwv 2
• Kev teeb tsa crosspoint input 1 ntawm tag nrho cov outputs
• I/O Ports Unmuted, xauv
• TPS mode Auto
• PoE 48V pab Pab
• HDCP pab (input) Pab
• HDCP hom (tso zis) Auto
• Xim qhov chaw / xim ntau Pib / Auto
• Hom teeb liab Auto
• HDMI hom Auto
• Emulated EDID F49 - (Universal HDMI, txhua lub suab, kev txhawb nqa xim sib sib zog nqus)
• Suab qhov chaw embedded suab
• Suab hom HDMI audio passthrough
• Tus neeg siv phau ntawv tseem muaj nyob ntawm QR code hauv qab no:
• Lightware Visual Engineering PLC.
• Budapest, Hungary
• sales@lightware.com
• +36 1 255 3800
• support@lightware.com
• +36 1 255 3810
• © 2023 Lightware Visual Engineering. Txhua txoj cai. Tag nrho cov cim lag luam hais txog yog cov cuab yeej ntawm lawv cov tswv.
• Cov lus qhia tshwj xeeb yuav hloov pauv yam tsis tau ceeb toom.
• Cov ntaub ntawv ntxiv ntawm lub cuab yeej muaj nyob ntawm www.lightware.com.

Cov ntaub ntawv / Cov ntaub ntawv

LIGHTWARE HT080 Multiport Matrix Switcher [ua pdf] Cov neeg siv phau ntawv qhia HT080 Multiport Matrix Switcher, HT080, Multiport Matrix Switcher, Matrix Switcher, Hloov Hloov

Cov ntaub ntawv

• Cov neeg siv phau ntawv