LECTROSONICS DPR-A Digital Plug-On Transmitter Tus Neeg Siv Qhia

Tswj thiab ua haujlwm

LCD npo

Cov LCD yog tus lej-type Liquid Crystal Display nrog ntau lub vijtsam uas tso cai rau kev teeb tsa ua nrog rau MENU/SEL thiab Rov qab khawm, thiab cov UP thiab POM xub nyees khawm kom configure lub transmitter. Lub transmitter tuaj yeem qhib rau hauv hom "standby" nrog cov cab kuj raug kaw kom hloov kho yam tsis muaj kev pheej hmoo cuam tshuam nrog lwm lub tshuab wireless nyob ze.

Fais fab LED

Cov PWR LED glows ntsuab thaum lub roj teeb them. Cov xim hloov mus rau xim liab thaum muaj li 20 feeb ntawm lub neej tshuav. Thaum lub LED pib ntsais liab, tsuas muaj ob peb feeb ntawm lub neej.

Lub roj teeb tsis muaj zog yuav qee zaum ua rau PWR LED kom ci ntsuab tam sim ntawd tom qab muab tso rau hauv chav tsev, tab sis yuav sai sai tso tawm mus rau qhov chaw uas lub LED yuav mus liab los yog kaw kiag li.

Ntsiab LED

Tus yuam sij xiav LED yuav ntsais yog tias tsis tau teeb tsa tus yuam sij encryption thiab "tsis muaj tus yuam sij" yuav ntsais rau LCD. Tus yuam sij LED yuav nyob twj ywm yog hais tias tus encryption yog teem kom raug thiab yuav tua nyob rau hauv Standby hom.

Modulation LEDs

Qhov Modulation LEDs muab qhov pom kev pom ntawm cov tswv yim suab teeb liab theem ntawm lub microphone. Ob tug no ob xim LEDs tuaj yeem ci liab lossis ntsuab los qhia txog qib kev hloov pauv. Kev hloov pauv tag nrho (0 dB) tshwm sim thaum -20 LED thawj tig liab.

Teeb liab theem	- 20 LED	- 10 LED
Tsawg dua -20 dB	Tawm	Tawm
-20dB txog -10dB	Ntsuab	Tawm
-10 dB rau +0 dB	Ntsuab	Ntsuab
+0 dB txog +10 dB	Liab	Ntsuab
Ntau tshaj +10 dB	Liab	Liab

MENU/SEL khawm

Cov MENU/SEL khawm yog siv los tso saib cov khoom ntawv qhia zaub mov transmitter. Nias ib zaug kom qhib cov ntawv qhia zaub mov, tom qab ntawd siv lub UP thiab POM xub mus scroll cov zaub mov. Xovxwm MENU/SEL rov xaiv ib qho kev xaiv los ntawm cov ntawv qhia zaub mov.

Khawm rov qab

Thaum ib qho kev xaiv tau ua nyob rau hauv cov ntawv qhia zaub mov, nias lub Rov qab Khawm txuag koj xaiv thiab rov qab mus rau cov ntawv qhia zaub mov dhau los.

UP/down Arrow Buttons

Cov UP thiab POM xub nyees khawm yog siv los scroll los ntawm cov ntawv qhia zaub mov. Los ntawm Main Screen, siv UP Arrow los tig lub LEDs ntawm thiab POM Xub tig lub LEDs tawm.

Menu Shortcuts

Los ntawm lub vijtsam tseem ceeb / hauv tsev, cov ntawv qhia luv luv hauv qab no muaj:

Simultaneous xovxwm ntawm Rov qab khawm + UP xub khawm: Pib sau
Simultaneous xovxwm ntawm Rov qab khawm + POM xub khawm: Nres cov ntaub ntawv
Xovxwm MENU/SEL: Shortcut los kho cov tswv yim nce zaub mov
Nias lub UP xub khawm tig lub tswj vaj huam sib luag LEDs rau; nias lub POM xub khawm kom tig lawv tawm

Suab tswv yim Jack

Poj niam 3 pin XLR rau AES standard balanced input jack ntawm lub transmitter haum rau tes tuav, rab phom thiab ntsuas microphones. Phantom fais fab tuaj yeem teeb tsa ntawm ntau theem rau kev siv nrog ntau yam ntawm electret microphones.

Kav hlau txais xov

Cov DPR-A muaj SMA tus kav hlau txais xov sab nraud, uas lees txais Lectrosonics steel flex hlau AMM lossis AMJ series kav hlau txais xov.

IR (infrared) Chaw nres nkoj

IR chaw nres nkoj muaj nyob rau sab ntawm lub transmitter rau kev teeb tsa ceev siv lub receiver nrog cov haujlwm no muaj. IR Sync yuav hloov qhov chaw rau zaus ntawm lub receiver mus rau lub transmitter.

Roj teeb Installation thiab Powering On

Lub roj teeb lub qhov rooj yog ua los ntawm machined aluminium thiab yog hinged rau lub tsev kom tsis txhob puas los yog poob.

Lub transmitter yog siv los ntawm ob lub roj teeb AA.

Nco tseg: Txheem zinc-carbon roj teeb cim "hnyav" lossis "ntev" tsis txaus.

Cov roj teeb ua haujlwm nyob rau hauv series, nrog rau cov phaj sib txuas ua rau hauv lub qhov rooj roj teeb.

Txhawm rau teeb tsa cov roj teeb tshiab:

1. Qhib lub roj teeb npog thiab tshem tawm cov roj teeb qub.
2. Ntxig cov roj teeb tshiab rau hauv tsev. Ib lub roj teeb mus rau qhov zoo (+) kawg ua ntej, lwm qhov tsis zoo (-) kawg ua ntej. Saib rau hauv lub roj teeb compartment los txiav txim seb qhov kawg mus rau sab twg. Sab nrog lub voj voog insulator yog sab uas lees txais qhov zoo kawg ntawm lub roj teeb
   
   Nco tseg: Nws tuaj yeem txhim kho cov roj teeb rov qab thiab kaw lub qhov rooj roj teeb, tab sis cov roj teeb yuav tsis sib cuag thiab lub tsev yuav tsis muaj zog.
3. Xaub lub Roj Teeb Npog kom txog thaum nws kaw kom zoo.
4. Txuas lub kav hlau txais xov.

CEEB TOOM: Kev pheej hmoo ntawm kev tawg yog tias lub roj teeb hloov los ntawm hom tsis raug.

Powering On nyob rau hauv kev ua hauj lwm hom

Nias thiab tuav lub Hwj chim Khawm luv luv kom txog rau thaum qhov kev nce qib bar ntawm tus LCD ua tiav.

Thaum koj tso lub khawm, chav tsev yuav ua haujlwm nrog RF tso zis thiab qhib qhov rais Main.

Tuav lub hwj chim khawm kom txog thaum qhov kev nce qib tiav

Fais fab rau hauv Standby hom

Ib nyuag xovxwm ntawm lub Hwj chim khawm thiab tso nws ua ntej qhov kev ua tiav bar tiav, yuav tig lub tsev nrog rau RF tso zis tawm. Hauv hom Standby no cov ntawv qhia zaub mov tuaj yeem tshawb xyuas los teeb tsa thiab hloov kho yam tsis muaj kev pheej hmoo cuam tshuam nrog lwm lub tshuab wireless nyob ze.

Txuas / Tshem tawm lub microphone

Lub caij nplooj ntoos hlav loaded coupler nyob rau hauv lub XLR jack tuav ib tug ruaj ntseg haum rau lub microphone jack nrog nruam siab thov los ntawm ib tug sab hauv lub caij nplooj ntoos hlav.

Txhawm rau txuas lub microphone, tsuas yog kho cov XLR pins thiab nias lub microphone mus rau lub transmitter kom txog thaum lub coupler thim rov qab thiab latches. Ib lub suab nyem yuav hnov ​​​​thaum lub connector latches.

Txhawm rau tshem tawm lub microphone, tuav lub cev transmitter hauv ib txhais tes nrog lub microphone taw tes rau saum. Siv koj txhais tes los tig lub coupler kom txog thaum lub latch tso tawm thiab lub coupler nce me ntsis.

Tsis txhob rub lub microphone thaum tso lub dab tshos xauv.

CEEB TOOM: Tsis txhob tuav lossis siv lub siab rau lub microphone lub cev thaum sim tshem nws, vim qhov no yuav tiv thaiv lub latch los ntawm kev tso tawm.

Transmitter cov lus qhia ua haujlwm

1. Nruab lub roj teeb thiab kav hlau txais xov
2. Tig lub zog rau hauv hom Standby (saib ntu dhau los)
3. Txuas lub microphone thiab muab tso rau hauv qhov chaw uas nws yuav siv.
4. Kom tus neeg siv tham lossis hu nkauj ntawm tib theem uas yuav siv rau hauv kev tsim khoom, thiab kho cov khoom nkag (Input Menu, Gain). yog li ntawd - 20 LED blinks liab ntawm lub ncov nrov.
   
   Siv cov UP thiab POM xub khawm los kho qhov nce mus txog -20 LED blinks liab ntawm lub ncov nrov

   Teeb liab theem	- 20 LED	- 10 LED
   Tsawg dua -20 dB	Tawm	Tawm
   -20dB txog -10dB	Ntsuab	Tawm
   -10 dB rau +0 dB	Ntsuab	Ntsuab
   +0 dB txog +10 dB	Liab	Ntsuab
   Ntau tshaj +10 dB	Liab	Liab

5. Teem lub zaus kom phim tus txais.
   Qhov kev tshuaj ntsuam teeb tsa rau kev xaiv zaus (Xmit Menu, Freq) muaj ob txoj hauv kev los xauj cov zaus muaj.
   
   Nias lub MENU/SEL khawm xaiv txhua qhov chaw. Siv cov UP thiab POM xub khawm los kho qhov zaus. Txhua daim teb yuav dhau los ntawm cov zaus muaj nyob rau hauv qhov sib txawv increment.
6. Teem hom encryption key thiab sync nrog receiver.
   Hom Ntsiab
   DPR tau txais tus yuam sij encryption ntawm qhov chaw nres nkoj IR los ntawm qhov tseem ceeb tsim tau txais (xws li Lectrosonics DCHR thiab DSQD txais). Pib los ntawm kev xaiv hom tseem ceeb hauv lub receiver thiab tsim tus yuam sij tshiab. Teem lub KEY HOM sib txuam hauv DPR thiab hloov tus yuam sij los ntawm tus txais (SYNC KEY) mus rau DPR ntawm IR chaw nres nkoj. Cov lus pom zoo yuav tso tawm ntawm lub receiver zaub yog tias kev hloov pauv tau ua tiav.
   DPR muaj peb txoj hauv kev rau cov yuam sij encryption:
   • Universal: Qhov no yog qhov yooj yim tshaj plaws kev xaiv encryption muaj. Txhua tus encryption-muaj peev xwm Lectrosonics transmitters thiab receivers muaj Universal Key. Tus yuam sij tsis tas yuav tsim los ntawm tus txais. Tsuas yog teeb tsa DPR thiab Lecrosonics receiver rau Universal, thiab qhov encryption nyob rau hauv qhov chaw. Qhov no tso cai rau kev yooj yim encryption ntawm ntau lub transmitters thiab receivers, tab sis tsis muaj kev ruaj ntseg zoo li tsim ib tus yuam sij tshwj xeeb.
   • Muab faib: Muaj tus lej tsis txwv ntawm cov yuam sij sib koom muaj. Thaum tsim los ntawm tus txais thiab xa mus rau DPR, tus yuam sij encryption muaj nyob rau hauv kev sib koom (synced) los ntawm DPR nrog rau lwm cov transmitters / receivers ntawm IR chaw nres nkoj. Thaum lub tshuab xa hluav taws xob tau teeb tsa rau hom tseem ceeb no, cov ntawv qhia zaub mov hu ua SEND KEY yog muaj los hloov tus yuam sij mus rau lwm lub cuab yeej.
   • Txheem: Qhov no yog qib siab tshaj ntawm kev ruaj ntseg. Cov yuam sij encryption yog qhov tshwj xeeb rau tus txais thiab tsuas muaj 256 tus yuam sij kom hloov mus rau lub tshuab xa tawm. Lub receiver taug qab tus naj npawb ntawm cov yuam sij tsim thiab tus naj npawb ntawm lub sij hawm txhua tus yuam sij raug xa mus.
     
     So Key
     Cov ntawv qhia zaub mov no tsuas yog muaj yog tias Hom Ntsiab yog teem rau Txuj or Sib koom. Xaiv Yog lawm los so tus yuam sij tam sim no thiab pab kom lub DPR kom tau txais tus yuam sij tshiab.
     Xa tus yuam sij
     Cov ntawv qhia zaub mov no tsuas yog muaj yog tias Hom Ntsiab yog teem rau Sib koom. Xovxwm MENU/SEL kom sync tus yuam sij Encryption rau lwm lub transmitter lossis receiver ntawm IR chaw nres nkoj.
7. Tig lub hwj chim tawm thiab rov qab rau thaum tuav lub Hwj chim khawm nyob rau hauv kom txog rau thaum qhov kev kawm bar tiav.
   Txhawm rau tig lub tshuab, tuav lub Hwj chim Khawm luv luv thiab tos rau qhov kev kawm bar kom tiav. Yog hais tias tus Hwj chim khawm tso tawm ua ntej qhov kev kawm bar tiav, chav tsev yuav nyob twj ywm qhib thiab lub LCD yuav rov qab mus rau tib lub vijtsam lossis cov ntawv qhia zaub mov uas tau tshwm sim yav dhau los.
   

Cov lus qhia ua haujlwm Recorder

1. Nruab roj teeb
2. Ntxig microSDHC daim npav nco
3. Qhib lub hwj chim
4. Format daim npav nco (Saib nplooj 10 thiab 11)
5. Txuas lub microphone thiab muab tso rau hauv qhov chaw uas nws yuav siv.
6. Kom tus neeg siv tham lossis hu nkauj ntawm tib theem uas yuav siv rau hauv kev tsim khoom, thiab kho qhov kev tawm tswv yim kom nce -20 LED blinks liab ntawm lub ncov nrov.
   

   Teeb liab theem	- 20 LED	- 10 LED
   Tsawg dua -20 dB	Tawm	Tawm
   -20dB txog -10dB	Ntsuab	Tawm
   -10 dB rau +0 dB	Ntsuab	Ntsuab
   +0 dB txog +10 dB	Liab	Ntsuab
   Ntau tshaj +10 dB	Liab	Liab

   Siv cov UP thiab POM xub khawm los kho qhov nce mus txog -20 LED blinks liab ntawm lub ncov nrov
   Jam timecode
   TC Jam (lub sijhawm teem sijhawm)
   
   Thaum twg TC Jam yog xaiv, JAM TAM SIM NO yuav blink rau LCD thiab chav tsev yog npaj tau synced nrog lub sij hawm code qhov chaw. Txuas lub timecode qhov chaw thiab lub sync yuav tshwm sim. Thaum lub sync ua tiav, cov lus yuav tshwm sim kom paub meej tias qhov kev ua haujlwm.
   Timecode defaults mus rau 00: 00: 00 ntawm lub zog yog tias tsis muaj lub sijhawm siv los cuam tshuam rau chav tsev. Lub sijhawm siv tau nkag mus rau hauv BWF metadata.
   

7. Xovxwm MENU/SEL, xaiv SDCard thiab Sau los ntawm cov ntawv qhia zaub mov
   
8. Txhawm rau kaw tseg, nias MENU/SEL, xaiv SDCard thiab nres; lus TXUAG tshwm ntawm qhov screen
   

Enabling tej thaj chaw deb muaj nuj nqi (Setup Menu)

Lub DPR tuaj yeem teeb tsa los teb rau "dweedle tone" cov cim los ntawm LectroRM lub xov tooj ntse app lossis tsis quav ntsej lawv. Siv cov pob xub los toggle ntawm "yog" (cov chaw taws teeb tswj ntawm) thiab "tsis yog" (cov chaw taws teeb tswj tawm). Txhawm rau teb rau cov chaw taws teeb tswj lub suab nrov, DPR yuav tsum ua kom tau raws li qee qhov yuav tsum tau ua:

• Yuav tsum tsis txhob muab tua; Txawm li cas los xij nws tuaj yeem nyob hauv hom pw tsaug zog.
• Microphone yuav tsum nyob rau hauv ntau yam.
• Yuav tsum tau teeb tsa kom ua kom muaj kev tswj hwm chaw taws teeb.

Thov nco ntsoov tias cov app no ​​tsis yog cov khoom lag luam Lectrosonics. Nws yog tus tswv thiab ua haujlwm los ntawm New Endian LLC, www.newendian.com.

Formatting SD Card

Tshiab microSDHC nco phaib tuaj ua ntej formatted nrog a FAT32 file system uas yog optimized rau kev ua tau zoo. Cov DPR tso siab rau qhov kev ua tau zoo no thiab yuav tsis cuam tshuam qhov qis qis hauv qab formatting ntawm cov SD daim npav. Thaum lub DPR "formats" ib daim npav, nws ua haujlwm zoo ib yam li Windows "Quick Format" uas tshem tawm tag nrho files thiab npaj daim npav rau kev kaw. Daim npav tuaj yeem nyeem tau los ntawm txhua lub khoos phis tawj txheem tab sis yog tias muaj kev sau, kho lossis tshem tawm rau daim npav los ntawm lub khoos phis tawj, daim npav yuav tsum tau rov ua dua nrog cov ntawv. DPR los npaj nws dua rau kev kaw. Cov DPR yeej tsis muaj qib qis formats ib daim card thiab peb xav tawm tswv yim tawm tsam ua li ntawd nrog lub computer.

Txhawm rau format daim npav nrog lub DPR, xaiv Format Card hauv cov ntawv qhia zaub mov thiab nias MENU/SEL ntawm tus keyboard.

CEEB TOOM: Cov lus yuam kev yuav tshwm sim yog samples poob vim qhov ua tsis tau zoo ntawm daim npav "slow".

CEEB TOOM: Tsis txhob ua ib hom ntawv qib qis (ua tiav hom) nrog lub computer. Ua li no yuav ua rau daim npav nco siv tsis tau nrog DPR recorder.

Nrog lub qhov rais raws li lub computer, nco ntsoov xyuas lub thawv ceev hom ua ntej formatting daim npav.

Nrog lub Mac, xaiv MS-DOS (FAT).

TSEEM CEEB

Kev formatting ntawm SD daim npav teeb tsa cov kev sib txuas sib txuas rau kev ua haujlwm siab tshaj plaws hauv cov txheej txheem kaw. Cov file hom ntawv siv BEXT (Broadcast Extension) yoj hom uas muaj cov ntaub ntawv txaus nyob rau hauv lub header rau file cov ntaub ntawv thiab lub sij hawm code imprint.

Daim npav SD, raws li formatted los ntawm DPR recorder, tuaj yeem ua rau muaj kev puas tsuaj los ntawm kev sim ncaj qha mus kho, hloov, hom lossis view tus files hauv computer.

Txoj kev yooj yim tshaj plaws los tiv thaiv cov ntaub ntawv kev noj nyiaj txiag yog luam tawm .wav files los ntawm daim npav mus rau lub computer lossis lwm qhov Windows lossis OS formatted media FIRST.

Repeat – COPY LUB FILES FIRST!

• Tsis txhob hloov npe files ncaj qha rau ntawm daim npav SD.
• Tsis txhob sim hloov cov files ncaj qha rau ntawm daim npav SD.
• Tsis txhob txuag LEEJ TWG mus rau SD daim npav nrog lub computer (xws li lub log, sau ntawv files etc) - nws yog formatted rau DPR recorder siv xwb.
• Tsis txhob qhib lub files ntawm daim npav SD nrog rau lwm qhov kev pab cuam xws li Wave Agent lossis Audacity thiab tso cai rau txuag. Hauv Wave Agent, tsis txhob TSEEM CEEB - koj ua tau Qhib thiab ua si tab sis tsis txuag lossis Ntshuam - Wave Agent yuav ua rau lub corrupt file.

Hauv luv luv - yuav tsum tsis muaj kev tswj hwm cov ntaub ntawv ntawm daim npav lossis ntxiv cov ntaub ntawv rau daim npav nrog lwm yam uas tsis yog DPR recorder. Luam the files rau lub computer, thumb drive, hard drive, thiab lwm yam uas tau formatted raws li ib txwm OS ntaus ntawv FIRST – ces koj yuav hloov tau dawb do.

iXML Header Support

Cov ntaub ntawv kaw tseg muaj cov txheej txheem kev lag luam iXML chunks hauv file headers, nrog rau feem ntau siv teb sau rau hauv.

Compatibility nrog microSDHC nco phaib

Thov nco ntsoov tias DPR yog tsim los siv nrog microSDHC nco phaib. Muaj ntau ntau hom SD daim qauv qauv (raws li kev sau ntawv no) raws li qhov muaj peev xwm (cia hauv GB).

• SDSC: standard peev, mus txog thiab nrog rau 2 GB - Tsis txhob siv!
• SDHC: muaj peev xwm, ntau tshaj 2 GB thiab mus txog thiab suav nrog 32 GB - Siv hom no.
• SDXC: ncua peev xwm, ntau tshaj 32 GB thiab mus txog thiab suav nrog 2 TB - Tsis txhob siv!
• SDUC: ncua peev xwm, ntau tshaj 2 TB ib thiab mus txog thiab suav nrog 128 TB - Tsis txhob siv!

XC thiab UC daim npav loj dua siv cov qauv sib txawv thiab cov qauv tsheb npav thiab tsis sib xws nrog lub kaw lus. Cov no feem ntau yog siv nrog cov txheej txheem video tom qab thiab cov koob yees duab rau kev siv duab (video thiab kev daws teeb meem siab, kev yees duab ceev).

Tsuas yog microSDHC daim npav nco yuav tsum tau siv. Lawv muaj peev xwm los ntawm 4GB txog 32GB. Saib daim npav Speed ​​Class 10 (raws li qhia los ntawm C qhwv ib ncig ntawm tus lej 10), lossis UHS Speed ​​Class I phaib (raws li qhia los ntawm tus lej 1 hauv lub cim U). Kuj tseem nco txog microSDHC Logo.

Yog tias koj tab tom hloov mus rau lub npe tshiab lossis qhov chaw ntawm daim npav, peb ib txwm hais kom kuaj ua ntej ua ntej siv daim npav ntawm daim ntawv thov tseem ceeb.

Cov cim hauv qab no yuav tshwm sim ntawm daim npav nco tau sib xws. Ib lossis tag nrho cov cim yuav tshwm sim ntawm daim npav vaj tsev thiab ntim khoom.

LIMITED IB xyoo lav

Cov cuab yeej raug lav rau ib xyoos txij li hnub ntawm kev yuav khoom tiv thaiv cov khoom siv lossis kev ua haujlwm tsis zoo yog tias nws tau yuav los ntawm tus neeg muag khoom tso cai.

Qhov kev lees paub no tsis suav nrog cov khoom siv uas tau raug tsim txom lossis puas los ntawm kev tuav tsis tu lossis xa khoom. Qhov kev lees paub no tsis siv rau cov khoom siv lossis cov khoom siv ua qauv qhia.

Yog tias muaj qhov teeb meem tshwm sim, Lectrosonics, Inc. yuav, ntawm peb qhov kev xaiv, kho lossis hloov cov khoom puas yam tsis tau them nqi rau ob qho tib si lossis kev ua haujlwm. Yog tias Lectrosonics, Inc. tsis tuaj yeem kho qhov tsis xws luag hauv koj lub cuab yeej, nws yuav raug hloov pauv yam tsis tau them nqi nrog cov khoom tshiab zoo sib xws. Lectrosonics, Inc. yuav them tus nqi xa rov qab koj cov cuab yeej rau koj.

Qhov kev lees paub no tsuas yog siv rau cov khoom xa rov qab mus rau Lectrosonics, Inc. lossis tus neeg muag khoom tso cai, tus nqi thauj khoom them ua ntej, tsis pub dhau ib xyoos txij li hnub yuav khoom.

Qhov Kev Txiav Txim Siab no yog tswj hwm los ntawm txoj cai ntawm Lub Xeev New Mexico. Nws hais txog tag nrho kev lav phib xaub ntawm Lectrosonics Inc. thiab tag nrho cov kev kho mob ntawm tus neeg yuav khoom rau kev ua txhaum cai raws li tau teev tseg saum toj no. TSIS MUAJ LECTROSONICS, INC. los sis tsis muaj leej twg koom nrog hauv kev tsim khoom lossis kev xa khoom ntawm cov khoom siv yuav raug lav rau txhua qhov kev cuam tshuam, tshwj xeeb, rau txim, qhov tshwm sim, lossis kev puas tsuaj tshwm sim los ntawm kev siv los ntawm kev siv tam sim no. Cov khoom siv txawm tias LECTROSONICS, INC. tau txais kev pom zoo ntawm qhov ua tau ntawm kev puas tsuaj. YUAV TSUM TAU TXAIS KEV PAB CUAM LECTROSONICS, INC. Tshaj li tus nqi yuav khoom ntawm txhua yam khoom siv tsis raug.

Qhov kev lees paub no muab cov cai tshwj xeeb rau koj. Tej zaum koj yuav muaj txoj cai lij choj ntxiv uas txawv ntawm lub xeev mus rau ib lub xeev.

581 Laser Road NE, Rio Rancho, NM 87124 USA www.lectrosonics.com
505-892-4501 Ib • 800-821-1121 Ib • fax 505-892-6243 Ib • sales@lectrosonics.com

 

Cov ntaub ntawv / Cov ntaub ntawv

	LECTROSONICS DPR-A Digital Plug-On Transmitter [ua pdf] Cov neeg siv phau ntawv qhia DPR-A, Digital Plug-On Transmitter, DPR-A Cov Plug-On Transmitter, Transmitter
	LECTROSONICS DPR-A Digital Plug-On Transmitter [ua pdf] Phau ntawv qhia DPR-A, Digital Plug-On Transmitter, DPR-A Cov Plug-On Transmitter, Transmitter
	LECTROSONICS DPR-A Digital Plug-On Transmitter [ua pdf] Cov neeg siv phau ntawv qhia DPR-A E01, DPR-A E01-B1C1, DPR-A, Cov Plug-On Transmitter, DPR-A Cov Plug-On Transmitter, Plug-On Transmitter, Transmitter
	LECTROSONICS DPR-A Digital Plug On Transmitter [ua pdf] Phau ntawv qhia DPR-A Digital Plug Ntawm Transmitter, DPR-A, Digital Plug Ntawm Transmitter, Plug Rau Transmitter, Transmitter

Cov ntaub ntawv

• Cov neeg siv phau ntawv