KVMSwitchTech ANI-44HPSC 4K UHD 4 × 4 Matrix nrog Audio Output

Cov ntaub ntawv khoom

ANI-44HPSC yog 4K UHD + 4 × 4 Matrix nrog Suab Tso Tawm.

Ntim Cov Ntsiab Lus:

• ANI-44HPSC chav tsev
• Cov neeg siv phau ntawv

Nta:

• Tso cai routing txog li 4 qhov chaw mus rau 4 outputs
• Txhawb 4K UHD + daws teeb meem
• Xws li audio tso zis functionality
• Pem hauv ntej vaj huam sib luag tswj kom yooj yim ua haujlwm
• IR chaw taws teeb tswj kom yooj yim tswj

Specifications:

• Qauv: ANI-44HPSC
• Kev daws teeb meem: 4K UHD +
• Inputs: 4
• Cov zis: 4

Cov lus qhia siv khoom

Cov ntaub ntawv kev nyab xeeb:

• Nyeem tag nrho phau ntawv thiab lwm cov ntaub ntawv ua ntej ua haujlwm ntawm cov khoom siv.
• Ua raws txhua cov lus qhia luam tawm ntawm chav chassis rau kev ua haujlwm kom raug.
• Tsis txhob nchuav cov kua rau hauv chav tsev lossis ua haujlwm hauv cov kua.
• Xyuas kom cov hluav taws xob hluav taws xob ua tau raws li qhov yuav tsum tau ua thiab tiv thaiv lub tsev los ntawm nag, dej, thiab noo noo ntau dhau.
• Ntxuav lub tsev nrog ib daim ntaub qhuav huv si thiab tsis txhob siv cov tshuaj kuab tshuaj los yog cov tshuaj aerosol.
• Tsis txhob siv lub tsev yog tias lub zog hluav taws xob txuas yog frayed lossis tawg.
• Xa mus rau phau ntawv qhia yog tias muaj qee yam hauv qab no tshwm sim:
  • Cov hlua hluav taws xob lossis lub ntsaws ntsaws puas lawm.
  • Cov khoom tau poob los yog kua tau nchuav rau hauv cov khoom siv.
  • Cov cuab yeej tau raug los nag.
  • Cov cuab yeej siv tsis ua haujlwm ib txwm lossis nthuav tawm qhov kev hloov pauv hauv kev ua haujlwm.
  • Cov cuab yeej raug muab tso tseg los yog cov ntaub thaiv npog puas lawm.

Kev Tswj Xyuas Kev Ua Haujlwm & Kev Ua Haujlwm:

• Lub Hwj Chim Hwjchim: Nias lub pob no kom lub zog rau chav tsev (ntsuab LED) lossis muab tso rau hauv hom stand-by (liab LED).
• IR Txais Qhov rai: Txais IR teeb liab los ntawm cov chaw taws teeb IR suav nrog rau kev tswj ntawm chav tsev no nkaus xwb.
• IN 1 ~ 4 & OUT A ~ D Nyees khawm: Nias lub OUT yuam sij (A ~ D) ntawm cov zis koj xav xa ib qhov chaw mus rau (lawv yuav flash los qhia xaiv). Tom ntej no, nias lub IN tus yuam sij ntawm cov tswv yim (1 ~ 4) koj xav kom txoj kev mus rau qhov kev xaiv tawm. Thaum kawg, nias CONFIRM kom paub meej tias koj xaiv thiab ua qhov kev hloov pauv.

COV NTAUB NTAWV

Ua ntej sim siv lub tshuab no, thov xyuas lub ntim thiab xyuas kom meej tias cov khoom hauv qab no muaj nyob rau hauv lub thawv:

• ANI-44HPSC UHD + 4 × 4 HDMI Matrix nrog Suab tso zis
• 24V / 2.7A DC Fais Fab Adapter
• Chaw taws teeb tswj
• Rackmount Pob ntseg (Set of 2)
• Shockproof Feet (Tshooj 4)

SAFETY info

1. Txhawm rau kom ntseeg tau tias cov txiaj ntsig zoo tshaj plaws los ntawm cov khoom no, thov nyeem phau ntawv no thiab tag nrho lwm cov ntaub ntawv ua ntej ua haujlwm ntawm koj cov khoom siv.
   Khaws tag nrho cov ntaub ntawv rau yav tom ntej siv.
2. Ua raws li tag nrho cov lus qhia luam tawm ntawm chav tsev chassis rau kev ua haujlwm kom raug.
3. Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws, tsis txhob nchuav dej los yog lwm yam kua rau hauv lossis hauv chav tsev, lossis ua haujlwm hauv chav tsev thaum sawv hauv cov kua.
4. Xyuas kom tseeb tias cov hluav taws xob hluav taws xob ua tau raws li cov kev xav tau ntawm lub hwj chim uas tau teev nyob rau hauv qab ntawm chav tsev. Khaws chav tiv thaiv los ntawm nag, dej thiab dej noo ntau dhau.
5. Tsis txhob sim ntxuav lub tsev nrog cov tshuaj kuab tshuaj los yog cov tshuaj aerosol, vim qhov no yuav ua rau lub tsev puas. Plua plav nrog ib daim ntaub qhuav huv.
6. Tsis txhob siv chav tsev yog tias cov hlua hluav taws xob tawg los yog tawg. Cov hlua hluav taws xob yuav tsum raug xa mus kom lawv tsis zoo li yuav taug kev lossis pinched los ntawm cov khoom tso rau lossis tawm tsam lawv, them nyiaj tshwj xeeb rau cov hlua thiab ntsaws, cov khoom siv tau yooj yim, thiab lub ntsiab lus uas lawv tawm ntawm cov khoom siv.
7. Tsis txhob yuam kev hloov pauv lossis kev sib txuas sab nraud hauv txhua txoj kev. Lawv txhua tus yuav tsum txuas tau yooj yim, tsis tas yuav tsum tau yuam.
8. Ib txwm ua haujlwm ntawm chav tsev nrog AC hauv av xaim txuas nrog hluav taws xob hauv av. Kev ceev faj yuav tsum tau ua kom txoj kev hauv av ntawm ib qho khoom siv tsis raug swb.
9. AW voltage yuav tsum yog qhov tseeb thiab tib yam li cov ntawv luam tawm nyob tom qab ntawm chav tsev. Kev puas tsuaj los ntawm kev sib txuas rau AC voltage tsis them los ntawm ib qho warranty.
10. Tig lub hwj chim thiab disconnect unit los ntawm AC tam sim no ua ntej kev sib txuas.
11. Tsis txhob tuav lub hwj chim hloov hauv txoj haujlwm "ON".
12. Chav tsev no yuav tsum tau muab tso rau hauv qhov chaw qhuav qhuav, kom deb ntawm qhov chaw kub heev, kev co, plua plav, noo noo thiab txias. Tsis txhob siv lub tsev nyob ze ntawm qhov cub, cov ntawv sau cua sov, lub tshuab hluav taws xob, lossis lwm yam khoom siv hluav taws xob.
13. Tsis txhob thaiv cov kiv cua nkag los yog qhov chaw nres nkoj tawm. Tsis txhob siv cov khoom siv rau ntawm qhov chaw lossis hauv ib puag ncig uas tuaj yeem cuam tshuam cov huab cua nyob ib puag ncig ntawm chav tsev, xws li lub txaj, ntaub pua plag, ntaub pua plag, lossis cov khib nyiab tag. Yog tias chav tsev siv nyob rau hauv qhov chaw muaj plua plav lossis haus luam yeeb heev, chav tsev yuav tsum tau "tso tawm" ntawm cov plua plav txawv teb chaws thiab teeb meem.
14. Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws xob poob siab, tsis txhob tshem lub hau. Tsis muaj cov neeg siv khoom siv khoom siv sab hauv. Xa tag nrho cov kev pabcuam rau cov neeg ua haujlwm tsim nyog. Tsis muaj cov neeg siv khoom siv khoom siv sab hauv.
15. Thaum tsiv lub tsev, disconnect Input ports ua ntej, ces tshem tawm lub hwj chim cable; Thaum kawg, disconnect tus interconnecting cables mus rau lwm yam khoom siv.
16. Tsis txhob tsav cov Inputs nrog lub teeb liab theem siab tshaj qhov yuav tsum tau tsav cov cuab yeej kom tag nrho cov Output.
17. Cov khoom siv fais fab qaum yuav tsum tau muab tshem tawm ntawm lub qhov hluav taws xob thaum tso tseg tsis siv rau lub sijhawm ntev.
18. Txuag lub thawv thiab cov khoom ntim khoom txawm tias cov cuab yeej tuaj txog hauv qhov zoo. Yog tias koj puas xav tau nkoj lub tsev, tsuas yog siv lub Hoobkas ntim khoom qub xwb.
19. Cov Khoom Siv Qhia Txog Kev Pabcuam yuav tsum tau muab kev pabcuam los ntawm cov neeg ua haujlwm pabcuam thaum:
    • A. Cov hlua hluav taws xob lossis lub ntsaws ntsaws tau puas lawm.
    • B. Cov khoom tau poob, lossis cov kua tau nchuav rau hauv cov khoom siv.
    • C. Cov khoom siv tau raug los nag.
    • D. Cov khoom siv tsis zoo li ua haujlwm ib txwm muaj, lossis nthuav tawm qhov kev hloov pauv hauv kev ua haujlwm.
    • E. Cov cuab yeej tau poob, lossis lub thawv puas.

Taw qhia

Qhov no 4K UHD + 4 × 4 HDMI Matrix muab lub peev xwm los txuas mus txog (4) 4K UHD + HDMI qhov chaw mus txog (4) 4K UHD + HDMI cov lus qhia thiab hloov pauv ntawm lawv. Chav tsev no los nrog kev txhawb nqa tag nrho rau 18Gbps daws teeb meem mus txog, thiab suav nrog 4K @ 60Hz (4: 4: 4, 8-ntsis) nrog rau kev txhawb nqa rau 16-ntsis Sib Sib Zog Xim, HDR (High Dynamic Range), HD suab thiab lwm yam nta txhais los ntawm HDMI 2.0 specification. Nrog rau kev tswj hwm EDID uas suav nrog lub peev xwm los xaiv ntawm kev tsim hauv EDIDs, EDIDs theej los ntawm cov khoom siv sib txuas, nrog rau cov neeg siv muab EDIDs, cov matrix no tuaj yeem daws tau ntau yam teeb meem kev sib txuas. Chav tsev OSD muaj peev xwm tso saib txog 2 kab ntawm cov neeg siv cov ntawv hloov kho, nyob rau sab saum toj ntawm cov vis dis aus tso tawm txhua qhov tso zis, hauv cov xim koj xaiv. Chav tsev no muab cov txheej txheem nkag siab ntawm lub vaj huam sib luag pem hauv ntej nrog OSD nrog rau RS-232, Telnet, WebGUI, thiab IR chaw taws teeb tswj kev xaiv.

Cov khoom no muaj 3 xyoo warranty.

SYSTEM YUAV TSUM

• HDMI cov khoom siv xws li media player, video game consoles lossis set-top boxes.
• HDMI txais cov cuab yeej xws li HDTVs, saib lossis suab ampcov neeg ua neej nyob.
• Kev siv Premium High Speed ​​HDMI cables tau pom zoo.

APPLICATIONS

• Cov chaw nyob lossis kev lag luam AV matrix kev teeb tsa
• Kev ruaj ntseg systems
• Lecture halls thiab ballrooms
• Khw muag khoom showrooms
• Tswj chaw

SAFETY CEEB TOOM

Thov nyeem tag nrho cov lus qhia ua ntej sim unpack, nruab lossis khiav cov cuab yeej no thiab ua ntej txuas lub hwj chim.
Thov nco ntsoov cov hauv qab no thaum koj ntim thiab nruab cov cuab yeej no:

• Nco ntsoov ua raws li kev ceev faj txog kev nyab xeeb kom txo tau qhov hluav taws kub, hluav taws xob poob siab thiab raug mob rau tib neeg.
• Txhawm rau tiv thaiv hluav taws los yog poob siab, tsis txhob tso lub tsev los nag, ntub dej lossis teeb tsa cov khoom no ze dej.
• Tsis txhob nchuav cov kua ntawm txhua yam ntawm lossis rau hauv cov khoom no.
• Tsis txhob thawb ib yam khoom rau hauv cov khoom no los ntawm txhua qhov qhib lossis qhov khoob hauv chav tsev, vim tias koj tuaj yeem ua rau cov khoom puas hauv chav tsev.
• Tsis txhob muab cov khoom siv hluav taws xob txuas mus rau qhov chaw hauv tsev.
• Tsuas yog siv cov khoom siv fais fab (PSU). Tsis txhob siv PSU yog tias nws puas lawm.
• Tsis txhob cia ib yam dab tsi los so ntawm lub hwj chim cable los yog cia ib qho w(8) tso rau ntawm nws los yog ib tug neeg taug kev ntawm nws.
• Txhawm rau tiv thaiv lub tsev los ntawm kev kub dhau, tsis txhob thaiv cov vents lossis qhov qhib hauv chav tsev uas muaj qhov cua thiab tso cai rau qhov chaw txaus rau huab cua mus ncig ntawm chav tsev.

TSIS TXAUS SIAB
Cov ntaub ntawv hauv phau ntawv no tau raug tshuaj xyuas kom zoo thiab ntseeg tau tias muaj tseeb. Peb xav tias tsis muaj lub luag haujlwm rau kev ua txhaum cai ntawm patents lossis lwm txoj cai ntawm cov neeg thib peb uas yuav tshwm sim los ntawm kev siv.
Peb xav tias tsis muaj lub luag haujlwm rau qhov tsis raug uas yuav muaj nyob hauv daim ntawv no. Peb tsis cog lus tias yuav hloov kho lossis khaws cov ntaub ntawv tam sim no muaj nyob hauv daim ntawv no.
Peb muaj txoj cai los txhim kho cov ntawv no thiab/lossis cov khoom lag luam txhua lub sijhawm thiab yam tsis tau ceeb toom.

CEEB TOOM COPYRIGHT
Tsis muaj ib feem ntawm cov ntaub ntawv no yuav raug muab luam tawm, xa tawm, luam tawm, khaws cia rau hauv cov txheej txheem retrieval, lossis ib feem ntawm nws txhais ua ib hom lus lossis khoos phis tawj. file, nyob rau hauv ib daim ntawv los yog los ntawm ib tug txhais tau tias - hluav taws xob, mechanical, magnetic, optical, tshuaj, phau ntawv, los yog lwm yam - yam tsis muaj kev tso cai thiab kev tso cai.
© Copyright 2021. All Rights Reserved.
Version 1.2 NOV 2021

TRADEMARK ACKNOWEDGMENTS
Tag nrho cov khoom lossis cov npe kev pabcuam tau hais hauv daim ntawv no yuav yog cov cim lag luam ntawm cov tuam txhab uas lawv koom nrog.

NTA

• HDMI inputs thiab outputs txhawb 18Gbps 4K UHD + nrog HDR teeb liab
• DVI 1.0 ua raws li kev siv HDMI rau DVI adapter
• HDCP 1.x thiab 2.2 ua raws
• HDMI inputs thiab outputs txhawb UHD + daws teeb meem txog 4096 × 2160 @ 60Hz (4: 4: 4, 8-ntsis)
• Txhawb 16-ntsis sib sib zog nqus xim mus txog 1080p60
• Txhawb 1080p downscaling (tsuas yog ntawm qhov chaw nres nkoj A thiab chaw nres nkoj C)
• Txhawb kev hla dhau ntawm LPCM (txog 8 raws), bitstream thiab HD bitstream audio formats
• Zoo DAC (Digital to Analog audio Conversion) nrog rau hauv zos analog stereo suab breakout rau txhua HDMI tso zis (LPCM 2.0 qhov chaw xwb)
• Txhawb (6) EDIDs sab hauv, (4) EDIDs sab nraud theej los ntawm cov khoom siv sib txuas, thiab (4) cov neeg siv muab EDIDs
• OSD nrog cov neeg siv customizable cov ntaub ntawv ntawv
• Controllable ntawm pem hauv ntej vaj huam sib luag nyees khawm nrog LCD, WebGUI, Telnet, RS-232, thiab IR chaw taws teeb

SPECIFICATIONS

• HDMI Bandwidth: 18Gbps
• Input Ports: (4) HDMI (Type-A)
• Output Ports
• (4) HDMI (Type-A)
• (4) Analog Stereo (3.5mm)
• Tswj Chaw nres nkoj
• RS-232 (DE-9)
• Ethernet (RJ-45)
• IR Extender (3.5 hli)
• Chaw nres nkoj: USB 2.0 (Hom A)
• IR zaus: 38kHz
• Baud tus nqi: 19200
• Fais fab mov: 24V / 2.7A DC (US / EU tus qauv, CE / FCC / UL tau ntawv pov thawj)
• Kev Tiv Thaiv ESD (HBM):
• ± 8kV (Tshem Tawm Cua)
• ± 4kV (Tiv Thaiv Kev Tiv Thaiv)
• Dimensions (WxHxD): 17.2 x 1.9 x 10.6 nyob rau hauv (438x49x269mm) [Case Only] / 19 x 1.9 x 10.8 in (482x49x274mm) [All Inclusive]
• Qhov hnyav: 6.6lb / 2.99kg
• Chassis Khoom: Hlau (Steel)
• Chassis Xim: Dub
• Ua haujlwm kub: 0˚C - 40˚C / 32˚F - 104˚F
• Cia kub: -20˚C – 60˚C/-4˚F – 140˚F
• Tus txheeb ze humidity: 20 - 90% RH (Non-condensing)
• Kev siv hluav taws xob: 34W

PEM HAUV NTEJ

1. POWER BUTTON: Nias lub pob no kom lub zog rau chav tsev (ntsuab LED) lossis muab tso rau hauv hom stand-by (liab LED).
2. IR RECEIVING WINDOW: Txais IR teeb liab los ntawm cov chaw taws teeb IR suav nrog rau kev tswj ntawm chav tsev no nkaus xwb.
3. IN 1 ~ 4 & OUT A ~ D BUTTONS: Nias lub "Tawm" cov yawm sij (A ~ D) ntawm cov zis uas koj xav kom xa ib qhov chaw mus rau (lawv yuav flash los qhia xaiv). Tom ntej no, nias lub "IN" qhov tseem ceeb ntawm cov tswv yim (1 ~ 4) koj xav mus rau qhov kev xaiv tawm. Thaum kawg, nias "CONFIRM" kom paub meej tias koj xaiv thiab ua qhov kev hloov pauv.
4. CONFIRM BUTTON: Nias lub pob no kom paub meej tias cov kev tawm tswv yim tshiab / tso tawm routing xaiv. CANCEL BUTTON: Nias lub pob no kom tshem tawm cov kev tawm tswv yim tshiab / tso tawm / preset routing xaiv ua ntej lawv tau lees paub.
5. MENU BUTTON: Nias kom nkag mus rau LCD zaub mov, lossis rov qab tawm ntawm cov ntawv qhia zaub mov. ENTER BUTTON: Nias kom paub meej qhov kev xaiv hauv LCD zaub mov lossis kom tob rau hauv cov ntawv qhia zaub mov.
   + (PLUS) & – (MINUS) BUTTON: Nias kom nce thiab nqis los yog kho cov kev xaiv hauv LCD zaub mov.
6. TAG NRHO TAG NRHO: Nias lub pob no los xaiv tag nrho cov txiaj ntsig ib txhij rau kev ua haujlwm. Tom ntej no, nias lub "IN" qhov tseem ceeb ntawm cov tswv yim (1 ~ 4) koj xav mus rau tag nrho cov zis. Thaum kawg, nias "CONFIRM" kom paub meej tias koj xaiv thiab ua qhov kev hloov pauv.
7. PRESET BUTTON: Nias kom nkag mus rau cov ntawv qhia zaub mov rov qab ua ntej hauv lub qhov rais LCD. Nias lub "+/-" cov nyees khawm ua raws los ntawm "ENTER" khawm xaiv thiab qhib qhov nyiam preset.
8. LOCK BUTTON: Nias kom xauv tag nrho cov khawm ua haujlwm ntawm lub vaj huam sib luag pem hauv ntej. Nias thiab tuav rau 3 vib nas this kom tso lub xauv muaj nuj nqi. Lub LCD yuav tso saib "Xauv" thaum lub luag haujlwm ua haujlwm.
9. MUTE BUTTON: "MUTE" khawm ua haujlwm raws li lub suab / yees duab dawb paug. Txhawm rau siv nws, ua raws li cov txheej txheem matrix routing cov lus qhia, tab sis siv lub pob "MUTE" raws li cov tswv yim kom tsis txhob tso tawm cov txiaj ntsig tau xaiv. Thaum siv "MUTE" input nws yuav tshwm sim li "M" nyob rau hauv lub routing zaub.
   Nco tseg: Qhov sib txuam analog tso zis yuav tsis raug kaw.
10. LCD WINDOW: Qhia cov ntawv qhia zaub mov, chaw thiab cov ntaub ntawv.

Lub Vaj Huam Sib Luag

1. HDMI IN 1 ~ 4 PORTS: Txuas rau HDMI cov khoom siv xws li media player, game consoles lossis set-top boxes.
2. AUDIO/HDMI OUT A~D PORTS: Txuas lub HDMI tso tawm rau cov khoom siv xws li HDMI TVs, saib lossis amplifiers rau digital video thiab audio tso zis. Txuas lub suab tawm mus rau cov neeg hais lus muaj zog lossis ib qho amplifier rau analog tso suab tso zis. Lub suab los ntawm txhua lub tso suab tso suab analog yuav zoo ib yam li HDMI cov zis nws tau ua ke nrog.
3. SERVICE PORT: Qhov no yog tshwj tseg rau firmware hloov tshiab siv xwb.
4. CONTROL PORT: Txuas ncaj qha, lossis los ntawm kev hloov pauv hauv lub network, rau koj lub PC / laptop los tswj lub tsev ntawm Telnet /WebGUI.
5. RS-232 PORT: Txuas ncaj qha mus rau PC, laptop lossis lwm yam khoom siv tswj hwm kom xa RS-232 cov lus txib los tswj lub tsev.
6. IR IN PORT: Txuas mus rau qhov muab IR Extender kom txuas ntxiv IR tswj ntau ntawm chav tsev. Xyuas kom meej tias cov chaw taws teeb siv yog nyob rau hauv txoj kab ncaj nraim ntawm qhov pom ntawm IR Extender.
7. DC 24V PORT: Txuas lub 24V DC fais fab adapter rau hauv chav tsev thiab txuas mus rau AC phab ntsa qhov hluav taws xob rau lub zog.

Chaw taws teeb tswj

1. POWER BUTTON: Nias kom lub hwj chim ntawm chav tsev los yog muab tso rau hauv hom stand-by.
2. 1/A ~ 4/D BUTTON: Nias cov yuam sij no los teeb tsa txoj kev yees duab. Nias lub "-/
   OUT" tus yuam sij ua raws li tus yuam sij (A ~ D) ntawm cov txiaj ntsig uas koj xav mus rau qhov chaw mus rau (lawv yuav nyem rau ntawm LCD los qhia xaiv). Tom ntej no, nias lub "+/IN" tus yuam sij ua raws li cov tswv yim
   (1 ~ 4) koj xav tau txoj hauv kev mus rau qhov kev xaiv tawm. Thaum kawg, nias "ENTER" kom paub meej tias koj xaiv thiab ua qhov kev hloov pauv.
   Nco tseg: Cov nyees khawm 5 / E ~ 8 / H tsis muaj kev ua haujlwm nrog cov matrix no.
3. TAG NRHO TAG NRHO: Nias tus yuam sij no los xaiv tag nrho cov txiaj ntsig ib txhij rau kev ua haujlwm. Tom ntej no, nias tus yuam sij ntawm cov tswv yim (1 ~ 4) koj xav mus rau txhua qhov kev tawm. Thaum kawg, nias "ENTER" kom paub meej tias koj xaiv thiab ua qhov kev hloov pauv.
   MUTE BUTTON: Nias tus yuam sij no kom kaw cov zis video. Nias tus yuam sij ntawm cov tswv yim (1 ~ 4) koj xav mus rau txoj kev ces nias tus yuam sij mute rau mute video tso zis.
   INFO BUTTON: Hloov cov ntaub ntawv tso tawm ntawm txhua qhov tso zis OSD ntawm tus neeg siv cov ntawv hloov kho thiab cov ntsiab lus video / Ethernet tam sim no.
   PRESET BUTTON: Nias kom nkag mus rau cov ntawv qhia hu ua preset hauv lub qhov rais LCD. Nias lub "+/IN" thiab "-/OUT" khawm ua raws li los ntawm "ENTER" khawm xaiv thiab qhib qhov nyiam preset.
4. MENU BUTTON: Nias kom nkag mus rau LCD zaub mov, lossis rov qab tawm ntawm cov ntawv qhia zaub mov.
   ENTER BUTTON: Nias kom paub meej qhov kev xaiv hauv LCD zaub mov lossis kom tob rau hauv cov ntawv qhia zaub mov.
   CANCEL BUTTON: Nias kom tshem tawm cov kev tawm tswv yim tshiab / tso tawm / preset routing xaiv ua ntej lawv tau lees paub.
   + (PLUS) / IN BUTTON: Nias mus rau hauv cov ntawv qhia zaub mov lossis pib xaiv qhov kev tawm tswv yim rau routing.
   - (MINUS) / OUT BUTTON: Nias mus rau hauv cov ntawv qhia zaub mov lossis pib xaiv cov khoom siv rau kev ua haujlwm.

RS-232 Pinout thiab Defaults

Serial Port Default Settings
Baud Rate	19200
Cov ntaub ntawv	8 bits
Parity khoom	Tsis muaj
Nres khoom	1
Flow Control	Tsis muaj

IR Cable Pinout

Cable Specifications

CABLE LENGTH	1080p ib		4k 30	4k 60
	8-IB	12-IB	(4:4:4) 8-TSI	(4:4:4) 8-TSI
HIGH SPEED HDMI CABLE
HDMI cov tswv yim	49 ft / 15 m	~ 33 ft / 10M	16 ft / 5 m	~ 10 ft / 3M
HDMI tso zis	49 ft / 15 m	~ 33 ft / 10M	16 ft / 5 m	~ 10 ft / 3M

Bandwidth qeb Examples:

• 1080p (FHD Video)
  • Mus txog 1080p @ 60Hz, 12-ntsis xim
  • Cov ntaub ntawv qis dua 5.3Gbps lossis qis dua 225MHz TMDS moos
• 4K30 (UHD Video)
  • 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit color
  • Cov ntaub ntawv tus nqi siab dua 5.3Gbps lossis siab dua 225MHz TMDS moos tab sis qis dua 10.2Gbps
• 4K60 (UHD + Video)
  • 4K@50/60Hz (4:4:4, 8-bit)
  • 4K@50/60Hz (4:2:0, 10-bit HDR)
  • Cov ntaub ntawv tus nqi siab dua 10.2Gbps

Pem Hauv Ntej Vaj Huam Sib Luag LCD Zaub

MAIN MENU

EDID

Kev teeb tsa ua ntej

Network xwm txheej

Kev teeb tsa Network

OSD Teeb

CEC Xa

Firmware

Firmware Update

Factory Reset

Txhua lub luag haujlwm tseem ceeb ntawm chav tsev no tuaj yeem tswj tau los ntawm kev siv lub vaj huam sib luag pem hauv ntej LCD zaub mov uas tau qhib los ntawm nias lub MENU khawm nyob rau pem hauv ntej ntawm chav tsev. Siv lub + (PLUS), − (MINUS), thiab ENTER nyees khawm los mus rau lub LCD zaub mov. Nias lub MENU khawm kom rov qab tawm ntawm txhua yam khoom noj thiab tom qab ntawd nias nws dua los kaw cov ntawv qhia zaub mov.

Cov haujlwm ntawm tus kheej ntawm LCD zaub mov yuav raug qhia hauv ntu nram qab no. Cov khoom cim nyob rau hauv BOLD yog lub Hoobkas pib teeb tsa.

1. Hauv 1 ~ 4: Xaiv EDID los muab rau txhua qhov kev tawm tswv yim ntawm nws tus kheej. (6) EDIDs sab hauv, (4) dab dej EDIDs thiab (4) cov neeg siv EDIDs muaj. Nias lub pob "Enter" kom paub meej tias qhov kev xaiv. Tom qab xaiv qhov kev hloov pauv yuav tshwm sim tam sim ntawd ntawm cov tswv yim.
   Nco tseg: Tom qab hloov EDID ntawm ib qho kev tawm tswv yim, cov yees duab feem ntau yuav dub tawm luv luv thaum lub hauv paus hloov kho rau cov ntaub ntawv tshiab.

   EDID
   2 ND LEVEL	3 RD LEVEL
   Hauv 1 ~ 4	01 FHD 2 Ch
   	02 FHD MCH
   	03 UHD 2 Ch
   	04 UHD MCH
   	05 UHD+ 2 Ch
   	06 UHD+ MCh
   	07 Sib A
   	08 Sib B
   	09 cev c
   	10 Nkoj D
   	11 Cov neeg siv 1
   	12 Cov neeg siv 2
   	13 Cov neeg siv 3
   	14 Cov neeg siv 4

2. Hauv tag nrho: Xaiv EDID los muab rau txhua qhov kev nkag. (6) EDIDs sab hauv, (4) dab dej EDIDs thiab (4) cov neeg siv EDIDs muaj. Nias lub pob "Enter" kom paub meej tias qhov kev xaiv. Tom qab xaiv qhov kev hloov pauv yuav tshwm sim tam sim ntawm txhua qhov kev nkag.
   Nco tseg: Qhov kev teeb tsa no yuav hla ib qho kev xaiv ntawm EDID tus kheej.

EDID
2 ND LEVEL	3 RD LEVEL
Hauv Txhua	01 FHD 2CH
	02 FHD MCH
	03 UHD 2 Ch
	04 UHD MCH
	05 UHD+ 2 Ch
	06 UHD+ MCh
	07 Sib A
	08 Sib B
	09 cev c
	10 Nkoj D
	11 Cov neeg siv 1
	12 Cov neeg siv 2
	13 Cov neeg siv 3
	14 Cov neeg siv 4

1. PRESET SETUP: Xaiv tus naj npawb ntawm cov preset khaws cia tam sim no routing configuration rau hauv. Nias lub pob "Enter" kom paub meej tias qhov kev xaiv.
   Tom qab txuag lub preset, qhov chaw khaws cia yuav tshwm rau ntawm LCD. Nias lub khawm "Menu" kom rov qab mus ua haujlwm li qub.

PRESET SETUP
2 ND LEVEL	3 RD LEVEL
1-4 : kuv	[Khoo Preset]

1. NETWORK STATUS: Muab cov ntaub ntawv sib txuas tam sim no lossis cov xwm txheej ntawm chav tsev rau txhua yam khoom.

NETWORK STATUS
2 ND LEVEL	3 RD LEVEL
Txuas:	[Txoj kev txuas tam sim no]
Hom:	[Tam sim no network hom]
IP:	[Tam sim no IP chaw nyob]
Daim npog ntsej muag:	[Tam sim no netmask]
Rooj vag:	[qhov chaw nyob tam sim no]
MAC:	[MAC chaw nyob]

1. KEV: Teem lub chav rau Static lossis DHCP hom. Thaum xaiv hom DHCP, tag nrho cov ntaub ntawv IP chaw nyob yuav raug muab tso cia los ntawm DHCP server hauv zos. Thaum xaiv Static, tus IP chaw nyob, netmask thiab lub rooj vag yuav tsum tau teeb tsa manually thiab ntxiv cov ntawv qhia zaub mov muaj.
2. IP: Thaum DHCP tawm, tus IP chaw nyob tuaj yeem teeb tsa ntawm no. Nias lub pob "Enter" pib kho qhov chaw nyob thiab siv cov "+" thiab "-" khawm los kho txhua tus nqi. Nias lub pob "Enter" khaws cov lej tam sim no thiab txav mus rau ntu tom ntej.
   Nco tseg: Chav tsev qhov chaw nyob IP zoo li qub yog 192.168.1.50.
3. MASK: Thaum DHCP tawm, netmask tuaj yeem teeb tsa ntawm no. Nias lub pob "Enter" pib kho qhov chaw nyob thiab siv cov "+" thiab "-" khawm los kho txhua tus nqi. Nias lub pob "Enter" txhawm rau khaws cov lej tam sim no thiab txav mus rau ntu tom ntej.
4. GATE: Thaum DHCP tawm, qhov chaw nyob qhov rooj tuaj yeem teeb tsa ntawm no. Nias lub pob "Enter" pib kho qhov chaw nyob thiab siv cov "+" thiab "-" khawm los kho txhua tus nqi. Nias lub pob "Enter" khaws cov lej tam sim no thiab txav mus rau ntu tom ntej.

NETWORK SETUP
2 ND LEVEL	3 RD LEVEL
Hom:	RUAM
	DHCP
IP:	[Qhov chaw nyob IP tam sim no]
Daim npog ntsej muag:	[Tam sim no netmask]
Rooj vag:	[qhov chaw nyob tam sim no]

1. OUT A ~ D: Qhib lossis lov tes taw OSD chij ntawm txhua qhov tso zis. Qhov kev hloov pauv yuav tshwm sim tom qab "Enter" tau nias ntawm qhov kev xaiv hloov pauv.

OSD SETUP
2 ND LEVEL	3 RD LEVEL
Tawm A	OFF
	On
Tawm B	OFF
	On
Tawm C	OFF
	On
Tawm D	OFF
	On

1. OUT A ~ D: Xaiv qhov chaw tso zis uas nyiam siv cov "+" thiab "-" khawm thiab tom qab ntawd nias lub pob "Enter" xaiv nws. Siv cov "+" thiab "-" nyees khawm, xaiv qhov tsim nyog CEC hais kom xa mus rau cov zaub txuas nrog rau qhov chaw tso zis xaiv.
   • On/Off: Tig cov zaub txuas rau lossis tawm.
   • Vol +/Vol -: Nce lossis txo qhov ntim ntawm cov khoom sib txuas.
   • Mute: Mute lub suab tso zis ntawm cov khoom txuas nrog.

Nco tseg: Tsis yog txhua qhov kev qhia tuaj yeem txhawb nqa tag nrho CEC cov lus txib.

CEC SEND
2 ND LEVEL	3 RD LEVEL
Tawm A ~ D	On
	Tawm
	Vol + Cov
	Vol –
	Ntshai

1. KHWV TAU: Qhia txog chav tsev tam sim no firmware version.

NKAUJ NTSEEG
2 ND LEVEL	3 RD LEVEL
Firmware	[Tam sim no firmware version]

1. UA USB UPDATE: Xaiv "Yog" yuav npaj lub tsev los hloov kho firmware ntawm USB chaw nres nkoj. Tom qab tso lub USB ntiv tes xoo uas muaj cov firmware siv tau file (*.bin format) cov txheej txheem hloov tshiab yuav pib. Tom qab ua tiav chav tsev yuav cia li reboot.

FIRMWARE UPDATE
2 ND LEVEL	3 RD LEVEL
Puas yog USB Update?	TSIS MUAJ
	Yog lawm

1. UA Factory RESET: Xaiv "Yes" yuav ua lub Hoobkas pib dua thiab xa rov qab lub tsev rau nws lub Hoobkas ua ntej. Tom qab rov pib dua tiav, chav tsev yuav rov pib dua.

HOOBKAS QHOV RESET
2 ND LEVEL	3 RD LEVEL
Factory Reset?	TSIS MUAJ
	Yog lawm

Device Discovery

Thov muab "Device Discovery" software los ntawm koj tus neeg muag khoom tso cai thiab khaws cia rau hauv cov npe uas koj tuaj yeem nrhiav tau yooj yim.
Txuas lub tsev thiab koj lub PC/Laptop rau tib lub network nquag thiab ua rau "Device Discovery" software. Nyem rau "Nrhiav Devices
ntawm Network" thiab cov npe ntawm cov cuab yeej txuas nrog lub network hauv zos yuav tshwm sim qhia lawv qhov chaw nyob IP tam sim no.

Nco tseg: Chav tsev tus IP chaw nyob yog 192.168.1.50.

1. IP MODE: Yog tias koj xaiv, koj tuaj yeem hloov kho tus IP zoo li qub network teeb tsa rau lub cuab yeej, lossis hloov lub tsev rau hauv DHCP hom kom tau txais kev teeb tsa network tsim nyog los ntawm DHCP server hauv zos. Txhawm rau hloov mus rau DHCP hom, thov xaiv DHCP los ntawm IP hom kev poob qis, tom qab ntawd nyem "Txuag" ua raws li "Reboot".
2. WEBGUI HOTKEY: Thaum koj txaus siab rau lub network teeb tsa, koj tuaj yeem siv lawv los txuas ntawm Telnet lossis WebGUI. Lub network cov ntaub ntawv qhov rai muab ib qho yooj yim txuas mus tso lub WebGUI ncaj qha.

WebGUI Tshajview

Tom qab txuas mus rau lub WebGUI qhov chaw nyob hauv a web browser, tus ID nkag mus screen yuav tshwm sim.
Thov sau tus neeg siv lub npe thiab tus password uas tsim nyog ces nyem "Submit" kom nkag mus.

Nco tseg: Lub neej ntawd tus neeg siv lub npe thiab tus password yog "admin".

Nyob rau sab laug ntawm tus browser koj yuav pom cov ntawv qhia zaub mov hauv qab no qhov twg tag nrho cov haujlwm tseem ceeb ntawm chav tsev yog tswj tau los ntawm kev tsim hauv WebGUI. Cov haujlwm ntawm tus kheej yuav raug qhia nyob rau hauv ntu nram qab no.
Nyem qhov liab "Logout" tab yuav cia li teev tus neeg siv tam sim no txuas tawm ntawm qhov WebGUI thiab rov qab mus rau nplooj ntawv nkag.

Hloov Tab

Nplooj ntawv no muab kev teeb tsa video routing, preset save/loading, thiab I/O renaming options. Txhawm rau pib muab txoj hauv kev video tshiab, thov nyem lub pob ntawm HDMI tso zis koj xav xa cov vis dis aus rau thiab tom qab ntawd nyem rau ntawm lub pob ntawm qhov nyiam HDMI cov tswv yim chaw nres nkoj. Yog tias xav tau, koj tuaj yeem xaiv ntau tshaj ib qhov tso zis ua ntej xaiv cov tswv yim. Thaum koj xaiv txhua lub pob lawv yuav hloov lawv cov xim rau txiv kab ntxwv. Txoj kev tshiab yuav dhau los ua haujlwm tam sim ntawd tom qab xaiv qhov chaw nkag nkag thiab cov ntaub ntawv qhia txog kev tso tawm ntawm cov nyees khawm yuav hloov raws li.

1. NTUJ: Nyees khawm rau xaiv cov zis (A ~ D) rau txoj kev A/V Inputs rau. Cov ntsiab lus hais txog cov npe tso zis thiab tam sim no xaiv Cov Lus Qhia kuj tshwm sim ntawm no. Nyem rau ntawm "kho" icon qhib qhov Kho kom raug tso zis qhov rai uas tso cai rau hloov ntau yam kev teeb tsa ntsig txog cov zis video.
   • Video Mute: Txhua qhov tso zis tuaj yeem kaw tus kheej (dub yees duab, tsis muaj suab). Txhawm rau kaw qhov tso zis, thov nyem lub cim nyob rau hauv qhov tsim nyog cov zis khawm. Txhawm rau unmute cov zis, thov nyem lub cim thib ob.
     Nco tseg: Qhov sib txuam analog tso zis yuav tsis raug kaw.
2. NTAWV: Cov nyees khawm rau xaiv cov kev nkag mus rau txoj hauv kev mus rau qhov tso zis uas tau xaiv. Cov ncauj lus kom ntxaws txog cov npe nkag thiab cov ntaub ntawv teeb liab kuj tshwm sim ntawm no. Nyem rau ntawm lub "kho" icon qhib rau Kho kom raug Input qhov rai uas tso cai rau hloov lub tswv yim lub npe.
   Nco tseg: Cov chaw tsis muaj ("") tsis tso cai rau npe.
3. EDIT OUTPUT: Lub qhov rais no tso cai rau hloov ntau yam kev teeb tsa ntsig txog cov zis video. Txhawb 1080p downscaling nkaus xwb ntawm qhov chaw nres nkoj A thiab chaw nres nkoj C, vim muaj kev txwv kho vajtse.
   Thaum qhov kev teeb tsa no tau qhib, 4K cov peev txheej yuav cia li txo qis rau 1080p thaum tswj hwm tus qauv qub.
   • Lub Npe Lub Npe: Txhawm rau hloov lub npe qhov chaw tso zis, ntaus lub npe tshiab hauv qhov chaw muab rau hauv Kho kom raug qhov rai. Nyem qhov "Txuag" khawm kom paub meej tias qhov kev hloov pauv.
     Nco tseg: Cov chaw tsis muaj ("") tsis tso cai rau npe.
   • OSD: Qhov kev hloov no ua rau lossis tsis ua haujlwm OSD cov ntawv sau rau cov zis no.
   • OSD Coordinate: Tshooj lus no txhais qhov chaw ntawm OSD cov ntawv sau. Tus nqi X tuaj yeem yog los ntawm 1 txog 1920 thiab tus nqi Y tuaj yeem yog los ntawm 1 txog 1080. Nyem rau "Txuag" khawm kom paub meej tias cov kev hloov pauv.
   • OSD Text: Txhua qhov tso zis tuaj yeem tso tawm txog 2 kab ntawm OSD ntawv nyeem. Sau txhua kab ntawv ntawm no. Nyem rau "Txuag" khawm kom paub meej tias cov kev hloov pauv.
     Nco tseg: Txhua kab ntawv tuaj yeem muaj txog 64 tus cim.
   • OSD Text Size: Siv lub dropdown los xaiv qhov loj me rau OSD cov ntawv sau. Qhov ntau thiab tsawg yog: 1x, 2x, thiab 4x.
   • OSD Text Color: Siv lub dropdown los xaiv cov xim uas nyiam rau OSD cov ntawv nyeem. Cov xim muaj: dub, dawb, liab, ntsuab, xiav, magenta, daj, cyan, thiab grey.
   • OSD Background Color: Siv lub dropdown los xaiv cov xim tom qab uas nyiam rau OSD cov ntawv nyeem. Cov xim muaj: dub, dawb, liab, ntsuab, xiav, magenta, daj, cyan, thiab grey.
   • OSD Background Color Transparent Level: Siv lub dropdown los xaiv qhov nyiam transparency theem ntawm OSD kev cai ntawv keeb kwm yav dhau. Qhov muaj ntau yam yog los ntawm Qib 1 (tag nrho opaque) mus rau Qib 8 (tag nrho pob tshab).
4. PRESET SETTINGS: Cov matrix no tuaj yeem khaws tau txog plaub qhov kev sib tham video presets. Presets tuaj yeem siv los khaws ntau lub xeev ua ntej kom nrawm, tsis muaj teeb meem, rov qab.
   • Preset Teeb: Thaum koj muaj lub matrix teeb txoj kev koj nyiam, koj tuaj yeem nyem lub "Preset Store" icon nyob rau sab xis ntawm lub qhov rais thiab lub qhov rais Preset Store yuav qhib. Hovering tus nas hla txhua lub pob yuav tso saib cov routing tam sim no khaws cia hauv nws. Koj tuaj yeem hloov npe txhua qhov preset los ntawm kev xaiv "Kho" icon. Nyem rau ntawm qhov chaw ntawm qhov nyiam preset khawm kom khaws cov kev qhia tam sim no hauv qhov preset.
   • Preset Recall: Txhawm rau thauj khoom preset yav dhau los, thov nyem lub cim "Preset Recall" thiab koj yuav raug nthuav tawm nrog kev xaiv ntawm 4 muaj presets. Hovering tus nas hla txhua lub pob yuav tso saib cov routing tam sim no khaws cia hauv nws. Lub preset yuav qhib tam sim ntawd thaum nias lub pob.

EDID Settings Tab

Cov matrix no muab cov kev xaiv ntawm rau tus qauv EDIDs, plaub lub dab dej los ntawm EDIDs thiab plaub tus neeg siv rub tawm EDIDs uas tuaj yeem raug xa mus rau txhua qhov chaw tawm tswv yim ntawm tus kheej. Cov npe ntawm plaub tus neeg siv rub tawm EDID tuaj yeem hloov pauv yog tias xav tau.

1. CUSTOMER EDID SETTINGS:
   • Txuag lub npe: Txhawm rau hloov lub npe ntawm Tus Neeg Siv Khoom EDID, ntaus lub npe tshiab hauv qhov chaw muab, tom qab ntawd nyem rau ntawm "Txuag Lub Npe" khawm.
   • Download tau: Txhawm rau txuag tus neeg siv uas twb muaj lawm EDID rau koj lub PC hauv zos thov nias lub pob "Download" nyob ib sab ntawm EDID koj xav txuag. Nyob ntawm koj qhov browser nqis koj yuav raug nug kom txuag qhov chaw rub tawm file, lub file yuav raug xa mus rau lub neej ntawd download qhov chaw ntawm koj lub PC.
   • Upload: Txhawm rau rub tawm tus neeg siv tshiab EDID, thov nyem lub pob "Upload" ntawm ib sab ntawm Cov Neeg Siv Khoom EDID Chaw uas koj xav hloov. Lub qhov rais EDID Upload yuav tshwm sim, tso cai rau koj mus nrhiav thiab xa cov EDID nyiam file (*.bin format) los ntawm ib lub PC hauv zos.
     Ib zaug qhov tseeb file tau raug xaiv, thov nias lub "Upload" khawm nyob rau hauv lub qhov rais, thiab cov file yuav raug xa mus rau lub matrix.
2. SINK EDID DOWNLOAD: Txhawm rau txuag EDID los ntawm ib qho ntawm cov kev sib txuas lus rau koj lub PC hauv zos, xaiv lub dab dej uas tsim nyog los ntawm cov npe poob thiab nias lub pob "Download". Nyob ntawm koj qhov browser nqis koj yuav raug nug kom txuag qhov chaw rub tawm file, lub file yuav raug xa mus rau lub neej ntawd download qhov chaw ntawm koj lub PC.
3. SET EDID INPUT COV NTAUB NTAWV: Nyem rau ntawm qhov nyiam cov tswv yim los qhib EDID Source tswj qhov rai. Ntau cov tswv yim tuaj yeem xaiv ib zaug, yog tias xav tau.
   

   Qhov no MATRIX muab cov nram qab no 6 DEFAULT EDIDS:
   UNIT's DEFAULT EDIDS
   FHD / 2 CH	1920x1080p @ 60Hz (4.95Gbps) & 8-ntsis xim, LPCM 2.0
   FHD/MCH	1920x1080p @ 60Hz (4.95Gbps) & 8-ntsis xim, LPCM 7.1 & Bitstream
   UHD / 2 CH	3840x2160p @ 30Hz (10.2Gbps) & Xim sib sib zog nqus (8/10/12-ntsis), LPCM 2.0
   UHD/MCH	3840x2160p @ 30Hz (10.2Gbps) & Xim sib sib zog nqus (8/10/12-ntsis), LPCM 7.1 & Bitstream
   UHD + / 2CH	3840x2160p @ 60Hz (18Gbps) & Xim sib sib zog nqus (8/10/12-ntsis), LPCM 2.0
   UHD+/MCH	3840x2160p @ 60Hz (18Gbps) & Xim sib sib zog nqus (8/10/12-ntsis), LPCM 7.1 & Bitstream

   Xaiv qhov EDID tshiab los siv thiab qhov kev hloov pauv yuav tshwm sim tam sim ntawd.
   Nco tseg: Feem ntau, muab EDID tshiab rau ib qho kev tawm tswv yim yuav ua rau cov tswv yim cuam tshuam los luv luv thaum lub hauv paus hloov mus rau cov ntaub ntawv tshiab.
   Nco tseg: Qee zaum nws muaj peev xwm ua tau rau kev cai lossis EDIDs sab nraud los ua teeb meem kev sib raug zoo nrog qee qhov chaw. Yog tias qhov no tshwm sim, nws raug nquahu kom hloov mus rau ib qho ntawm 6 lub neej ntawd EDIDs rau qhov siab tshaj plaws.

System Settings Tab

Nplooj ntawv no muab cov kev xaiv kev teeb tsa nrog rau kev tig lub zog ntawm lub zog rau / tawm, hloov lub network teeb tsa, rov pib dua lub kaw lus rau lub Hoobkas ua ntej thiab hloov kho lub firmware.

1. POWER: Nias qhov kev hloov no los hloov lub zog ntawm ON thiab OFF (hom standby).
   Nco tseg: Thaum nyob rau hauv hom standby lub unit WebGUI, Telnet thiab RS-232 tswj yog tseem ua haujlwm.
2. WEB USER SETTING: Nqe lus no muab ib txoj hauv kev los hloov tus neeg siv lub npe thiab tus password rau tus thawj tswj hwm tus account. Nyem rau "Txuag" kom paub meej thiab qhib txhua qhov kev hloov pauv rau cov chaw no.
   Nco tseg: Lub neej ntawd username thiab password yog "admin".
3. WEB LOGIN TIMEOUT (MINUTE): Xaiv lub sijhawm ntev los tos ua ntej nkag mus rau tus neeg siv tawm ntawm WebGUI vim tsis ua haujlwm. Lub sijhawm muaj yog los ntawm 5 mus rau 60 feeb.
4. NETWORK: Chav tsev tus IP hom yuav raug hloov ntawm Static IP lossis DHCP. Hauv hom IP zoo li tus IP, netmask thiab qhov rooj chaw nyob yuav raug teeb tsa manually. Thaum nyob rau hauv DHCP hom, chav tsev yuav sim txuas mus rau lub zos DHCP neeg rau zaub mov thiab tau txais IP, netmask thiab rooj vag chaw nyob tau txais. Nias "Txuag" tom qab hloov pauv rau IP teeb tsa lossis hom.
   Nco tseg: Chav tsev tus IP chaw nyob yog 192.168.1.50. Yog hais tias tus IP chaw nyob yog hloov ces tus IP chaw nyob yuav tsum tau rau WebGUI/Telnet nkag mus kuj yuav hloov raws li.
5. RESET RAU DEFAULT: Txhawm rau rov pib dua chav tsev xaiv txoj kev xaiv mus rau qhov chaw pib, nyem lub pob "Routing Reset". Txhawm rau rov pib dua chav tsev rau nws lub Hoobkas ua ntej lub xeev nias lub pob "Fadefault". Tom qab rov pib dua tiav, chav tsev yuav rov pib dua.
6. FIRMWARE UPGRADE: Txhawm rau hloov kho lub tsev firmware, nyem qhov "Xaiv File” khawm qhib lub file xaiv qhov rais thiab ces xaiv lub firmware hloov tshiab file (*.bin format) nyob ntawm koj lub PC hauv zos. Tom qab xaiv cov file, nyem lub pob "Upgrade" pib cov txheej txheem hloov kho firmware. Tom qab kev txhim kho tiav, chav tsev yuav rov pib dua.

Telnet Tswj

Ua ntej sim siv Telnet tswj, thov xyuas kom meej tias ob chav tsev thiab PC/Laptop txuas nrog tib lub network nquag.

Txhawm rau nkag mus rau Command Line Interface (CLI)
Hauv Windows XP	Nyem Pib> Khiav, hom "cmd" hauv qhov chaw tshawb nrhiav thiab nias Nkag mus.
Hauv Windows 7	Nyem Pib, hom "cmd" hauv qhov chaw tshawb nrhiav thiab nias Nkag mus.
Mac OS X	Nyem Mus> Applications> Utilities> Terminal.

Ib zaug hauv Command Line Interface (CLI) ntaus "telnet" ua raws li IP chaw nyob ntawm chav tsev (thiab tus lej chaw nres nkoj yog tias nws tsis yog tus qauv) thiab tom qab ntawd ntaus "Enter". Qhov no yuav txuas peb mus rau chav tsev uas peb xav tswj.

Nco tseg

1. Yog tias qhov chaw nyob IP raug hloov lawm ces tus IP chaw nyob yuav tsum tau siv rau Telnet kuj yuav hloov raws li.
2. Lub neej ntawd IP chaw nyob yog 192.168.1.50

Serial thiab Telnet Commands

Lus txib	POM ZOO THIAB PARAMETERS
Pab .-J	Qhia tag nrho cov npe hais kom ua.
? .-J	Qhia tag nrho cov npe hais kom ua.
P0 .-J	Tig lub tsev tawm (stand-by mode).
P1 .-J	Tig lub unit rau.
ST .-J	Qhia txog chav tsev tam sim no firmware version thiab routing xwm txheej.
FADEFAULT .-J	Reset lub tsev rau lub Hoobkas defaults.
REBOOT .-J	Reboot lub unit.
Hloov tshiab .-J	Npaj lub tsev los hloov kho firmware ntawm USB chaw nres nkoj. Tom qab tso lub USB ntiv tes xoo uas muaj cov firmware siv tau file (*.bin format) cov txheej txheem hloov tshiab yuav pib. Tom qab ua tiav chav tsev yuav cia li reboot.
QUIT .-J	Tshem tawm ntawm qhov kev sib tham Telnet tam sim no.
SIPMODE N1 .-J	Teem tus IP chaw nyob hom kev xaiv. Muaj nuj nqis rau N1: STATIC [Static IP hom] DHCP [DHCP hom]
SETIP N1 N2 N3 .-J	Teem tus IP chaw nyob, netmask thiab qhov chaw nyob qhov rooj siv thaum nyob hauv hom IP Static. N1 = XXXX [X = 0 ~ 255, IP chaw nyob] N2 = XXXX [X = 0 ~ 255, Netmask] N3 = XXXX [X = 0 ~ 255, Gateway address]
IPCONFIG .-J	Qhia cov ntaub ntawv qhia txog kev teeb tsa IP tam sim no.
ETH_FADEFAULT  .-J	Reset lub unit lub network nqis rau lub Hoobkas defaults.
npe N1 N2 .-J	Teem lub npe rau lub preset uas tau teev tseg. N1 = 1 ~ 4 [Preset tooj] N2 = {Preset name} [8 cim siab kawg]

N1N2 ._J	Route cov lus qhia tshwj xeeb rau ib lossis ntau qhov tso zis. N1 = A~D [Output port letter(s)] N2 = 1 ~ 4 [Input port naj npawb] Nco tseg: Ntau cov ntawv tso tawm tuaj yeem raug xa mus rau N1 kom xa tib qhov chaw mus rau ntau tshaj ib qho kev tso tawm ib zaug. Rau example: “ABD2” txoj kev input 2 rau outputs A, B, thiab D.
ib 1 ._J	Route cov input uas teev rau tag nrho cov outputs. N1 = 1 ~ 4 [Input port naj npawb] Nco tseg: Rau example, "I3" txoj kev input 3 rau tag nrho cov outputs.
RS ._J	Reset lub unit routing rau lub Hoobkas default.
KHOOM N1 ._J	Txuag tag nrho tam sim no routing assignments rau lub preset teev. N1 = 1 ~ 4 [Preset tooj]
SHOW N1 ._J	Sau cov routing assignments khaws cia nyob rau hauv lub preset teev. N1 = 1 ~ 4 [Preset tooj]
PRESET N1 ._J	Qhib cov routing assignments khaws tseg nyob rau hauv lub preset teev. N1 = 1 ~ 4 [Preset tooj]
EM N1 N2 ._J	Teem lub EDID siv rau ntawm cov lus qhia tshwj xeeb. N1 = 1 ~ 4 [Input port naj npawb] Muaj qhov tseem ceeb rau N2: 1 [FHD 2CH] 8 [Output B] 2 [FHD MCH] 9 [Output C] 3 [UHD 2CH] 10 [Output D] 4 [UHD MCH] 11 [User EDID 1] 5 [UHD+ 2CH] 12 [User EDID 2] 6 [UHD+ MCH] 13 [User EDID 3] 7 [Tshaj Tawm A] 14 [User EDID 4]
USEREDID N1 N2 ._J	Teem lub npe rau tus neeg siv EDID teev. N1 = 1 ~ 4 [Tus neeg siv EDID tus lej] N2 = {EDID lub npe} [8 cim siab kawg]
Broadcast N1 ._J	Qhib lossis kaw qhov kev tshaj tawm ntawm cov lus teb hais kom tswj kev sib txuas uas tsis yog qhov tam sim no. Muaj nuj nqis rau N1: ON [Enabled] OFF [Disabled]
BROADCAST  ._J	Qhia qhov xwm txheej tam sim no ntawm qhov chaw tshaj tawm.
CECOUT N1 N2 ._J	Xa cov lus txib uas tau teev tseg rau cov zaub txuas nrog cov zis HDMI tso tawm siv CEC. N1 = 1 ~ 4 [Output port naj npawb] Muaj qhov tseem ceeb rau N2: ON [Power off] OFF [Power on] VOL+ [Tshaj qhov ntim] VOL- [Tsawg ntim] MUTE [Mute audio]
OSDON N1 ._J	Pab kom OSD banner ntawv nyeem ntawm cov zis tau teev tseg. N1 = 1 ~ 4 [Output port naj npawb]
OSDOFF N1 ._J	Disable OSD banner ntawv ntawm cov zis tau teev tseg. N1 = 1 ~ 4 [Output port naj npawb]
OSDXY N1 N2 N3 ._J	Teem txoj haujlwm kab rov tav thiab ntsug ntawm lub kaum sab laug sab saud ntawm OSD banner cov ntawv ntawm cov ntawv teev tseg. N1 = 1 ~ 4 [Output port naj npawb] N2 = 1 ~ 1920 [kab rov tav txoj hauj lwm] N3 = 1 ~ 1080 [Vertical txoj hauj lwm]

OSDSTR N1 N2 N3 +–	Teem cov ntsiab lus ntawm OSD banner ntawv siv rau ntawm qhov teev tso zis. N1 = 1 ~ 4 [Output port naj npawb] N2 = 1 ~ 2 [Text kab xov tooj] N3 = {Text} [64 cim siab kawg]
OSDFSIZE N1 N2 +–	Teem lub font loj rau OSD banner ntawm cov zis tau teev tseg. N1 = 1 ~ 4 [Output port naj npawb] N2 = 1 ~ 3 [Font size]
OSDFCOLOR N1 N2 +–	Teem cov xim ntawm font siv los ntawm OSD banner ntawm cov zis tau teev tseg. N1 = 1 ~ 4 [Output port naj npawb] Muaj qhov tseem ceeb rau N2: 1 [Dub] 6 [Magenta] 2 [Dawb] 7 [Daj] 3 [Liab] 8 [Cyan] 4 [Ntsuab] 9 [Grey] 5 [Xiav]
OSDBGCOLOR N1 N2 +–	Teem cov xim ntawm keeb kwm yav dhau ntawm OSD banner ntawm cov zis tso zis. N1 = 1 ~ 4 [Output port naj npawb] Muaj qhov tseem ceeb rau N2: 1 [Dub] 6 [Magenta] 2 [Dawb] 7 [Daj] 3 [Liab] 8 [Cyan] 4 [Ntsuab] 9 [Grey] 5 [Xiav]
OSDTS N1 N2 +–	Teem cov qib pob tshab rau keeb kwm yav dhau ntawm OSD chij ntawm cov khoom tso tawm. N1 = 1 ~ 4 [Output port naj npawb] N2 = 1 ~ 8 [Transparency level]
OSDINFO N1 +–	Pab lossis lov tes taw hloov qhov kev cai OSD banner ntawv nrog cov ntaub ntawv kaw lus. Muaj nuj nqis rau N1: ON [System info displayed] OFF [System info display disabled]
ROSDINFO +–	Qhia qhov xwm txheej tam sim no ntawm OSDINFO teeb tsa.
SDI_CUSTOM N1 +–	Teem lub discrete IR neeg siv code siv. N1 = 0000~FFFF [Discrete IR code hauv ASCII hex]
RDI_CUSTOM  +–	Qhia qhov tam sim no discrete IR neeg siv code.

Nco tseg: Cov lus txib yuav tsis raug tua tshwj tsis yog ua raws li kev thauj mus los. Cov lus txib tsis yog qhov tseem ceeb.

KEV PAB CUAM DIAGRAM

Txhawb kev daws teeb meem (Hz)

RESOLUTION	NYIAJ	OUTPUT		RESOLUTION	NYIAJ	OUTPUT
720 x 400 p @ 70/85	✓	✓		1600 x 1200 p @ 60	✓	✓
640x480p@60/72/75/85	✓	✓		1680 x 1050 p @ 60	✓	✓
720x480 ib 60	✓	✓		1920 x 1080 i @ 50/60	✓	✓
720 x 480 p @ 60	✓	✓		1920x1080p@24/25/30	✓	✓
720x576 ib 50	✓	✓		1920 x 1080 p @ 50/60	✓	✓
720 x 576 p @ 50	✓	✓		1920 x 1200p @ 60 RB	✓	✓
800x600p@56/60/72/75/85	✓	✓		2560 x 1440p @ 60 RB	✓	✓
848 x 480 p @ 60	✓	✓		2560 x 1600p @ 60 RB	✓	✓
1024x768p@60/70/75/85	✓	✓		2048x1080p@24/25/30	✓	✓
1152 x 864 p @ 75	✓	✓		2048 x 1080 p @ 50/60	✓	✓
1280 x 720 p @ 50/60	✓	✓		3840x2160p@24/25/30	✓	✓
1280x768p@60/75/85	✓	✓		3840x2160p@50/60 (4:2:0)	✓	✓
1280x800p@60/75/85	✓	✓		3840x2160p @ 24, HDR10	✓	✓
1280 x 960 p @ 60/85	✓	✓		3840x2160p@50/60 (4:2:0), HDR10	✓	✓
1280x1024p@60/75/85	✓	✓		3840 x 2160 p @ 50/60	✓	✓
1360 x 768 p @ 60	✓	✓		4096x2160p@24/25/30	✓	✓
1366 x 768 p @ 60	✓	✓		4096x2160p@50/60 (4:2:0)	✓	✓
1400 x 1050 p @ 60	✓	✓		4096x2160p @ 24, HDR10	✓	✓
1440 x 900 p @ 60/75	✓	✓		4096x2160p@50/60 (4:2:0), HDR10	✓	✓
1600 x 900p @ 60 RB	✓	✓		4096 x 2160 p @ 50/60	✓	✓

Digital Audio

HDMI Input / Output
LPCM			BITSTREAM
Max Channels	8 Channel		Txhawb hom ntawv	Standard & High-Definition
SampLing tus nqi (kHz)	32, 44.1, 48, 88.2, 96, 176.4, 192

Analog Audio

Analog tso zis
Max Audio Level	2 VrM		Crosstalk	<-60dB@10kHz
THD + N	< -60dB@0dBFS 1kHz (A-wt)		Impedance	470Ω
SNR	> 70dB@0dBFS		Hom	Tsis sib npaug
Zaus teb	< ± 3dB @ 20Hz ~ 20kHz

THOV nyeem cov ntsiab lus thiab cov xwm txheej hauv qab no ua tib zoo saib ua ntej siv cov khoom siv no, cov khoom sib txuas thiab cov software muab los ntawm, dhau los lossis hauv qab A-NeuVideo, INC (Khoom ua haujlwm, "cov khoom siv"). Los ntawm kev siv kev txhim kho lossis siv Cov Khoom Siv, koj tsis tas yuav kos npe rau koj qhov kev pom zoo rau Cov Cai thiab Cov Cai no. Yog tias koj tsis pom zoo rau Cov Cai thiab Cov Cai no, tsis txhob siv Cov Khoom Siv thiab xa cov khoom xa rov qab mus rau A-NeuVideo, Inc. ntawm qhov chaw nyob xa rov qab tau teev tseg rau ntawm Cov Khoom Muag Khoom Muag ntawm koj cov nqi. A-NeuVideo, Inc. tuaj yeem hloov kho Cov Lus Cog Tseg no txhua lub sijhawm, yam tsis muaj ntawv ceeb toom rau koj.

Kev txwv tsis pub siv cov khoom siv
Nws yog koj lub luag haujlwm los nyeem thiab nkag siab txog kev teeb tsa thiab cov lus qhia ua haujlwm, ob qho tib si hais lus thiab sau ntawv, muab rau koj txog kev hwm cov khoom.
Koj raug tso cai siv Cov Khoom Siv nkaus xwb nrog rau cov lus qhia no. Ib qho kev siv cov khoom tsis ua raws li cov lus qhia no yuav tsis muaj kev lav phib xaub txog cov khoom. Ib qho thiab tag nrho cov kev puas tsuaj uas yuav tshwm sim hauv kev siv cov khoom uas tsis nruj me ntsis raws li cov lus qhia yuav tsum tau ua los ntawm koj thiab koj pom zoo rau kev them nyiaj thiab tuav tsis raug mob A-NeuVideo, Inc. los ntawm thiab tawm tsam ib qho kev puas tsuaj.
Cov Khoom raug tiv thaiv los ntawm qee cov cuab yeej cuab tam txoj cai muaj los ntawm lossis tso cai rau A-NeuVideo. Ib txoj cai lij choj twg muaj feem cuam tshuam nrog Cov Khoom tau tso cai los ntawm koj los ntawm A-NeuVideo, Inc. thiab/lossis nws cov koom nrog, suav nrog cov tuam ntxhab lossis cov xa khoom ntawm Cov Khoom (sau ua ke, "A-NeuVideo") rau koj tus kheej siv nkaus xwb, muab qhov ntawd koj tsis hloov lossis tshem tawm cov ntawv ceeb toom uas yog tswv uas yuav muab nrog kev hwm rau Cov Khoom.
Cov khoom muag yog muag rau koj thiab txhua yam kev siv cov cuab yeej cuab tam muaj feem cuam tshuam tau raug tso cai rau koj los ntawm A-NeuVideo rau koj tus kheej siv nkaus xwb.

A-NeuVideo tsis hloov lub npe lossis cov cai ntawm kev txawj ntse rau cov khoom thiab A-NeuVideo khaws tag nrho thiab ua tiav lub npe rau cov cai ntawm kev txawj ntse nyob rau hauv. Tag nrho cov cim lag luam thiab lub logo yog tus tswv los ntawm A-NeuVideo lossis nws cov ntawv tso cai thiab cov chaw muab khoom ntawm cov khoom, thiab koj yuav tsis luam lossis siv lawv li cas yam tsis tau sau ntawv tso cai ua ntej ntawm A-NeuVideo, qhov kev tso cai yuav raug txiav tawm ntawm qhov kev txiav txim siab ntawm tus kheej. A-NeebVideo.
Kev ua haujlwm thiab siv tau ntawm Cov Khoom yog tswj los ntawm A-NeuVideo, Inc. los ntawm nws cov chaw haujlwm hauv Xeev Texas, Tebchaws Asmeskas. A-NeuVideo ua rau tsis muaj kev sawv cev hais tias cov ntaub ntawv hais txog Cov Khoom tsim nyog lossis muaj rau siv nyob rau lwm qhov chaw uas tsis yog qhov chaw nyob xa khoom koj tau muab nrog kev hwm rau ntawd. Koj tau qhia tias Cov Khoom yuav raug rau Asmeskas kev tswj hwm kev xa tawm.

DAIM NTAWV THOV KEV PAB CUAM THIAB KEV PAB CUAM

A-NeuVideo tuaj yeem hloov lossis hloov kho cov khoom txhua lub sijhawm, los ntawm lub sijhawm.
Cov khoom lag luam tau muab "raws li yog" thiab tsis muaj kev lees paub ntawm ib tus txiv neej uas tsis hais tawm lossis ua raws li. A-NEUVIDEO TSIS TSHIAB LOS YOG TSHWJ XEEB TSHUAJ TIV THAIV YUAV TSUM MUAJ KEV SIV LOSSIS LOS NTAWM TUS NEEG YUAV TSUM MUAJ KEV PAB CUAM UAS YUAV UA LI CAS THIAJ YUAV UA LI CAS THIAB YUAV UA LI CAS THIAJ YUAV TSUM TAU TSO CAI.

A-NeuVideo tsis muaj lub luag haujlwm lossis txoj cai los hloov kho cov ntaub ntawv lossis cov lus hais txog Cov Khoom thiab, yog li ntawd, cov ntaub ntawv lossis cov lus yuav tsum tsis txhob cia siab tias yog tam sim no txij li hnub koj siv khoom. Ntxiv mus, ib feem ntawm cov ntaub ntawv hais txog Cov Khoom yuav suav nrog kev tsis raug lossis cov ntawv tsis raug. Kev hloov pauv tuaj yeem ua ib ntus dhau ib lub sijhawm yam tsis tau ceeb toom nrog kev hwm rau Cov Khoom.
YUAV UA LI CAS YUAV TSUM PAUB TXOG TXOJ HAUJ LWM HAUJ LWM, A-NEUVIDEO tsis lees paub txhua qhov kev lav phib xaub, nthuav tawm lossis hais qhia, suav nrog, tab sis tsis txwv rau qhov tsis muaj kev lav phib xaub ntawm kev lag luam kev lag luam, MENT.

A-NEUVIDEO TSIS TXAUS SIAB RAU qhov tseeb, ua tiav lossis siv tau ntawm txhua yam ntaub ntawv nrog kev hwm rau cov khoom lag luam.
A-NEUVIDEO TSIS TXAUS SIAB TXOG KEV UA HAUJ LWM ntawm cov khoom lag luam yuav tsis muaj kev ua yuam kev, uas cuam tshuam nrog kev hwm rau cov khoom lag luam yuav raug kho, lossis cov khoom muaj feem cuam tshuam nrog LEEJ TWG YUAV TSUM TAU TXAIS.
A-NEUVIDEO yuav siv nws qhov tsim nyog siv zog los kho tej yam tsis zoo hauv cov khoom raws sij hawm sau ntawv ceeb toom los ntawm koj tsis pub dhau 10 hnub ua lag luam tom qab tau txais los ntawm koj ntawm cov khoom lag luam, tab sis koj yuav tau txais txiaj ntsig (VIDEO) YUAV TSUM PAUB TXOG, kho thiab kho uas tau ua los ntawm koj tshwj tsis yog lwm tus tau pom zoo los ntawm kev sib cais sau los ntawm A-NEUVIDEO.
Nyob rau hauv tsis muaj qhov xwm txheej, suav nrog, tab sis tsis txwv rau, tsis muaj kev txwv, yuav tsum-A-NEUVIDEO muaj lub luag haujlwm rau ib qho tshwj xeeb lossis xwm txheej txaus ntshai uas tau tshwm sim los ntawm kev siv, lossis kev tsis muaj peev xwm los siv cov khoom raws li qhov xav tau ib leeg zuj zus. LOSSIS YUS TUS KHEEJ YUAV TSUM PAUB TXOG QHOV TSEEB TSHAJ PLAWS ZOO TSHAJ PLAWS Tsis muaj ib qho xwm txheej yuav tsum muaj kev lav phib xaub tag nrho rau koj los ntawm txhua qhov kev puas tsuaj, poob, thiab vim li cas ntawm kev ua (WHETHER IN CONTRACT, OR OTHERWISE) ZOO TSHAJ PLAWS uas koj them rau A-NEUVIDEO, yog li, rau qhov khoom.

Cov ntaub ntawv / Cov ntaub ntawv

KVMSwitchTech ANI-44HPSC 4K UHD 4x4 Matrix nrog Suab tso zis [ua pdf] Phau ntawv qhia ANI-44HPSC 4K UHD 4x4 Matrix nrog Suab Output, ANI-44HPSC, 4K UHD 4x4 Matrix nrog Audio Output, Matrix nrog Suab Output, Suab Output, Output

Cov ntaub ntawv

• Cov neeg siv phau ntawv