BAC-12xxxx FlexStat Controllers Sensors
Cov lus qhia
BAC-12xxxx FlexStat Controllers Sensors
BAC-12xxxx/13xxxx Series
FlexStat ™
Kev piav qhia thiab Daim Ntawv Thov
Qhov khoom plig yeej FlexStat yog tus tswj hwm thiab ntsuas hauv ib pob, txaus nyiam uas tsim cov kev daws teeb meem yooj yim rau kev tswj hwm ib leeg lossis BACnet kev sib tw network. Kev ntsuas kub yog tus qauv nrog xaiv cov av noo, kev txav, thiab CO2 sensing. Cov tswv yim yooj yim thiab tso tawm teeb tsa thiab tsim-hauv lossis kev cai ua haujlwm kom ntseeg tau tias ntau yam kev xav tau tuaj yeem ua tiav. Cov kev siv xws li ib leeg- thiab ntau-stage ntim, unitary, thiab cais tshuab (nrog rau siab SEER / EER hloov pauv ceev cov khoom ntim), nrog rau cov chaw tsim khoom ntim thiab siv cov khoom lag luam, dej-qhov thiab cua-rau-huab cua kub twj, kiv cua coil units, chaw nres tsheb hauv nruab nrab huab cua tuav units, thiab cov kev siv zoo sib xws.
Tsis tas li ntawd, ib lub tsev qiv ntawv nyob rau hauv cov kev pab cuam tso cai rau ib tug qauv kom sai configured rau ntau yam ntawm HVAC tswj daim ntawv thov. Yog li, ib qho "ib qho me me haum rau txhua tus" FlexStat qauv tuaj yeem hloov ntau tus qauv sib tw.
Ib qho BAC-120163CW, rau example, tuaj yeem teeb tsa sai rau ib qho ntawm cov kev xaiv hauv qab no:
◆ Cua tuav chav tsev, nrog proportional cua sov thiab cua txias li qub, thiab xaiv economizer, dehumidification, thiab/los yog kiv cua raws li txoj cai
◆ Ntxuam coil chav tsev, 2-pipe lossis 4-pipe, proportional lossis 2-txoj haujlwm li qub, nrog kev xaiv dehumidification (w / 4-pipe xaiv) thiab / lossis kiv cua
◆ Cov twj tso kua mis kub, nrog txog li ob lub compressor stages, thiab nrog rau kev xaiv cua sov, cua sov thaum muaj xwm ceev, dehumidification, thiab/los yog kiv cua
◆ Chav tsev sab saum toj, nrog txog li ob H/C stages, thiab nrog kev xaiv nyiaj txiag, dehumidification, thiab / lossis kiv cua
FlexStats kuj tseem muab lub peev xwm los kho tus qauv tsev qiv ntawv ntawm cov kab ke siv KMC programming tool (KMC Txuas, KMC Converge, lossis TotalControl). Qhov no ua rau KMC tso cai hauv zos txhim kho tus neeg cog lus kom hloov kho cov tsev qiv ntawv tus qauv rau qhov chaw tshwj xeeb xav tau thiab daim ntawv thov tshwj xeeb ntawm ib qhov project.
BACnet tshaj MS/TP kev sib txuas lus yog tus qauv. "E" versions, nrog rau RJ-45 jack, ntxiv BACnet dhau Ethernet, BACnet dhau IP, thiab BACnet dhau IP raws li Cov Khoom Siv Txawv Tebchaws (rau kev sib txuas lus thoob plaws Is Taws Nem).
Nta
Interface thiab Function
◆ Cov neeg siv-phooj ywg lus Askiv cov ntawv qhia zaub mov (tsis muaj cov lej cim tsis pom tseeb) ntawm 64 x 128 pixel, dot-matrix LCD zaub nrog 5 nyees khawm rau xaiv cov ntaub ntawv thiab nkag
◆ Ntau yam kev xaiv muaj xws li xaiv qhov chaw ntsuas qhov kub thiab txias, degrees F / C toggle, kev sib hloov qhov tseem ceeb, tso saib blanking, hom tos txais, thiab kaw hom
◆ Ua-nyob rau hauv, Hoobkas-kuaj cov tsev qiv ntawv ntawm configurable daim ntawv thov tswj sequences
◆ Kev tswj hwm kev tswj hwm lub zog nrog kev pib zoo tshaj plaws, cov khoom siv cua sov thiab cua txias, thiab lwm yam kev ua haujlwm siab heev kom paub tseeb tias kev nplij siab thaum ua kom txuag hluav taws xob
◆ Cov sijhawm teem tau yooj yim tuaj yeem tsim tshwj xeeb los ntawm tag nrho lub lim tiam (Hnub-Sun.), hnub ua haujlwm (Mon.–Fri.), hnub so (Satur.–Sun.), ib leeg hnub, thiab/lossis hnub so; rau lub sijhawm On/Off thiab ywj siab cua sov thiab cua txias lub sijhawm muaj nyob rau ib hnub
◆ Peb theem kev tiv thaiv tus password (tus neeg siv / tus neeg teb xov tooj / tus thawj tswj hwm) tiv thaiv kev cuam tshuam ntawm kev ua haujlwm thiab kev teeb tsa—ntxiv rau hom kev tos txais qhua thiab Xauv Tus Neeg Siv Khoom Sib Tham hom muab ntxiv tamptsis kam
◆ Qhov ntsuas kub thiab xaiv qhov av noo, kev txav, thiab / lossis CO2 sensors
◆ Txhua tus qauv muaj 72-teev lub zog (capacitor) thaub qab thiab lub sijhawm tiag tiag rau lub sijhawm sib txuas hauv network lossis ua haujlwm tag nrho
◆ Cov qauv ua haujlwm hloov feem ntau Viconics thiab lwm yam khoom sib tw
Cov tswv yim
◆ Rau analog inputs rau ntxiv configurable tej thaj chaw deb lwm sensors, xws li tej thaj chaw deb qhov chaw kub (nrog rau nruab nrab, siab tshaj, thiab qis tshaj xaiv), tej thaj chaw deb CO2, OAT,
MAT, DAT, dej kub, kiv cua, thiab lwm yam sensors
◆ Inputs txais kev lag luam-tus qauv 10K ohm (Type II los yog III) thermistor sensors, hu qhuav, los yog 0-12 VDC active sensors
◆ Input overvoltage tiv thaiv (24 VAC, nruam)
◆ 12-ntsis analog-rau-digital conversion ntawm inputs
Cov zis
◆ Cuaj qhov tso zis, analog thiab binary (relays)
◆ Txhua qhov luv-circuit tiv thaiv analog tso zis muaj peev xwm tsav mus txog 20 mA (ntawm 0-12 VDC)
◆ Qhov TSIS TAU, SPST (Form "A") relays nqa 1 A max. ib relay los yog 1.5 A ib lub txhab nyiaj ntawm 3 relays (relays 1-3 thiab 4-6) @ 24 VAC / VDC
◆ 8-ntsis PWM digital-to-analog conversion ntawm cov zis
Kev teeb tsa
◆ Backplate mounts rau ntawm tus qauv ntsug 2 x 4-nti phab ntsa khoom siv-lub thawv (lossis, nrog HMO-10000 adapter, kab rov tav lossis 4 x 4 handy-box), thiab lub hau npog tau ruaj khov rau lub nraub qaum los ntawm ob qhov zais hex ntsia hlau
◆ Ob daim qauv tsim muab kev yooj yim txuas thiab kev teeb tsa (saib Dimensions thiab Connectors ntawm nplooj 9)
Kev sib txuas
◆ Screw davhlau ya nyob twg thaiv, hlau loj 14-22 AWG, rau inputs, outputs, hwj chim, thiab MS/TP network
◆ "E" versions ntxiv RJ-45 jack
◆ Ib tug plaub-pin EIA-485 cov ntaub ntawv chaw nres nkoj nyob rau hauv qab ntawm rooj plaub enables yooj yim ib ntus computer kev twb kev txuas mus rau lub BACnet network BACnet Kev sib txuas lus thiab Standards
◆ Kev sib koom ua phooj ywg-rau-peer BACnet MS/TP LAN network kev sib txuas lus ntawm txhua tus qauv (nrog rau kev teeb tsa baud tus nqi ntawm 9600 txog 76.8K baud)
◆ "E" versions ntxiv BACnet dhau Ethernet, BACnet dhau IP, thiab BACnet dhau IP raws li Cov Khoom Siv Txawv Tebchaws
◆ Ua tau raws li lossis tshaj BACnet AAC cov lus qhia hauv ANSI/ASHRAE BACnet Standard 135-2008
Configurability
I/O
◆ Mus txog 10 analog input khoom (IN1 yog qhov chaw kub, IN2–IN4 thiab IN7–IN9 yog 0–12 VDC inputs, IN5 yog tseg rau cov av noo, IN6 yog tseg rau kev tshawb nrhiav, IN10 yog tseg rau CO2)
◆ Txog li 9 yam khoom siv analog lossis binary tso zis
Tus nqi
◆ 150 analog nqi khoom
◆ 100 binary nqi khoom
◆ 40 ntau lub xeev cov khoom muaj nqis (nrog rau 16 lub xeev txhua)
Program thiab tswj
◆ 20 PID voj khoom
◆ 10 qhov kev pab cuam cov khoom (muaj ib lub tsev qiv ntawv ntawm 5 builtin cov kev pab cuam thiab customized Control Basic programming nyob rau hauv lwm yam 5 yam khoom siv yuav ua tau los ntawm KMC Connect, KMC Converge, los yog TotalControl)
Teem caij thiab tiam sis
◆ 2 lub sijhawm khoom
◆ 1 calendar object
◆ 8 yam khoom sib txawv, txhua tus tuav 256 samples
Tswb thiab xwm txheej
◆ 5 chav qhia ceeb toom ( tswb / xwm txheej) khoom
◆ 10 yam khoom rau npe kawm
Cov qauv
Yog tias koj daim ntawv thov yog:
◆ FCU (Ntxuam Chav Tsev) lossis Chav Tsev, AHU (Air Handling Unit), lossis RTU (Rov Sab Saum Tsev)—saib txhua tus qauv
◆ HPU (Heat Pump Unit)—saib BAC-1xxx63CW qauv nkaus xwb
Yog xav paub ntxiv, saib Daim Ntawv Thov / Qauv Xaiv
Phau ntawv qhia ntawm nplooj 4. Saib cov FlexStat Catalog
Ntxiv thiab Xaiv Phau Ntawv Qhia.
| Qauv* | Cov zis ** | Yeem Sensors *** | Tej kev siv |
| PAB-12xxxx qauv (piv txwv li, BAC-120036CW) yog tus qauv thiab tsis muaj CO2 sensor. BAC-13xxxx qauv muaj CO2 sensors ntxiv rau Kev Tiv Thaiv Qhov Cuab Yeej rau cov ntawv thov hauv qab no. DCV tsuas yog muaj thaum siv AHU, RTU, lossis HPU daim ntawv thov nrog kev xaiv kev lag luam kev lag luam qhib. Saib Specifications, CO2 Qauv Tsuas yog nyob rau nplooj 6 yog xav paub ntxiv. | |||
| BAC-1x0036CW | 3 Relays thiab 6 Analog Outputs |
Tsis muaj | • 1H/1C, kiv cua, thiab 6 universal outputs • 3-ceev kiv cua, 2- los yog 4-pipe FCUs nrog modulating li qub • Central chaw nres tsheb AHUs nrog modulating / 1/2 Thaum tshav kub kub / txias • Hloov pauv-ceev kiv cua tso zis • Ib leeg-stage kev siv |
| BAC-1x0136CW | Humidity *** | • Ib yam li BAC-1x0036CW • Dehumidification ua ntu zus • Humidification sequence (AHU lossis 4-pipe FCU) |
|
| BAC-1x1036CW | Kev txav chaw/nyob | • Ib yam li BAC-1x0036CW • Kev ua haujlwm raws li neeg nyob |
|
| BAC-1x1136CW | Humidity thiab Motion / Nyob **** | • Ib yam li BAC-1x0136CW • Kev ua haujlwm raws li neeg nyob |
|
| BAC-1x0063CW | 6 Relays thiab 3 Analog Outputs | Tsis muaj | • 1 lossis 2 H thiab 1 lossis 2 C, kiv cua • Ntau-stage ntim los yog cais tshuab • Ntau-stage cov twj tso cua sov nrog lossis tsis muaj cov khoom lag luam ntim khoom lag luam • Central chaw nres tsheb AHUs nrog modulating Thaum tshav kub kub / txias • 3-ceev kiv cua, 2- los yog 4-pipe FCUs nrog modulating los yog 2-txoj hauj lwm li qub |
| BAC-1x0163CW | Humidity *** | • Ib yam li BAC-1x0063CW • Dehumidification sequence (AHU, 4-pipe FCU, los yog RTU) |
|
| BAC-1x1063CW | Kev txav chaw/nyob | • Ib yam li BAC-1x0063CW • Kev ua haujlwm raws li neeg nyob |
|
| BAC-1x1163CW | Humidity thiab Motion / Nyob **** | • Ib yam li BAC-1x0163CW • Kev ua haujlwm raws li neeg nyob |
|
| *Cov qauv xim yog dawb. Txhawm rau txiav txim siab lub teeb almond xim, tshem tawm "W" tom kawg ntawm tus qauv naj npawb(eg, BAC-121163C es tsis txhob BAC-121163CW). Txhawm rau xaj tus IP version, ntxiv ib qho E tom qab C (piv txwv li, BAC-121163CEW). Txhua tus qauv muaj lub sijhawm tiag tiag. **Analog tso zis tsim tawm 0-12 VDC @ 20 mA siab tshaj, thiab relays nqa 1 A max. ib relay lossis 1.5 A ib lub txhab nyiaj ntawm 3 relays (relays 1–3, 4–6, thiab 7–9) @ 24 VAC / VDC. ***Txhua tus qauv muaj 32-ntsis processor, lub ntsuas kub sab hauv, thiab 6 analog inputs. Txhua tus qauv muaj kev xaiv tso pa tawm huab cua kub ntsuas / kev sib tw thiab kev saib xyuas kiv cua. Kev xaiv sensors muaj xws li av noo, txav, thiab CO2. **** Hauv cov qauv nrog CO2 sensors, cov av noo sensors tuaj yeem ua qauv. |
|||
Daim Ntawv Thov / Qauv Xaiv Phau Ntawv Qhia
| Cov ntawv thov thiab kev xaiv | FlexStat Cov Qauv | |||||||
| 6 Relays thiab 3 Analog Outputs | 3 Relays thiab 6 Analog Outputs | |||||||
| BAC-1x0063CW | BAC-1x0163CW (+ Humidity) |
BAC-1x1063CW (+Txoj kev) |
BAC-1x1163CW (+ Cov av noo / txav) |
BAC-1x0036CW |
BAC-1x0136CW (+ Humidity) |
BAC-1x1036CW (+Txoj kev) |
BAC-1x1136CW (+ Cov av noo / txav) |
|
| Packaged Unit (Air Handling Unit thiab Roof Top Unit) | ||||||||
| 1 Kub thiab 1 txias |  |
|
|
|
||||
| 1 lossis 2 Kub thiab 1 lossis 2 Txias (hauv BAC-1xxx63 RTU Menu nkaus xwb) | RTU | RTU | RTU | RTU | ||||
| 1 lossis 2 Kub thiab Modulating Txias | |
|
|
|
||||
| Modulating Kub thiab 1 lossis 2 Txias | |
|
|
|
||||
| Modulating Kub thiab Modulating Txias (hauv AHU Menu nkaus xwb) | AHU | AHU | AHU | AHU | |
|
|
|
| Xaiv. Sab nraum Air Dampyog, Modulating | |
|
|
|
|
|
|
|
| Xaiv. Sab nraum Air Damper, 2 Txoj Haujlwm (hauv RTU Menu nkaus xwb) | RTU | RTU | RTU | RTU | |
|
|
|
| Xaiv. Ntxuam Ceev Tswj | |
|
|
|
||||
| Xaiv. Dehumidification | |
|
|
|
||||
| Xaiv. Humidifier | |
|
||||||
| Xaiv. Motion/Occupancy Sensor | |
|
|
|
|
|||
| Xaiv. CO2 Sensor nrog DCV (Xav tau tswj qhov cua) | PAB-13xxxx | |||||||
| Xaiv. IP / Ethernet BACnet Kev Sib Txuas Lus | Ntxiv ib qho E rau tus lej qauv: BAC-1xxxxCEx (saib Model Code) | |||||||
| FCU (Ntxuam Coil Unit) | Nrog 3-ceev kiv cua | |||||||
| 2 Tube, Modulating | |
|
|
|
|
|
|
|
| 2 Tube, 2 txoj haujlwm | |
|
|
|
||||
| 4 Tube, Modulating | |
|
|
|
|
|
|
|
| 4 Tube, 2 txoj haujlwm | |
|
|
|
||||
| Xaiv. Dehumidification (4 yeeb nkab nkaus xwb) | |
|
|
|
||||
| Xaiv. Humidifier (4 yeeb nkab nkaus xwb) | |
|
||||||
| Xaiv. Motion/Occupancy Sensor | |
|
|
|
||||
| Xaiv. CO2 Sensor nrog DCV (Xav tau tswj qhov cua) | DCV N / A rau FCU daim ntawv thov, tab sis CO2 theem tseem pom | |||||||
| Xaiv. IP / Ethernet BACnet Kev Sib Txuas Lus | Ntxiv ib qho E rau tus lej qauv: BAC-1xxxxCEx (saib Model Code) | |||||||
| HPU (Heat Pump Unit) | 1 los yog 2 compressors nrog pab thiab thaum muaj xwm ceev kub | |||||||
| Xaiv. Sab nraum Air Dampyog, Modulating | |
|
|
|
N/A |
|||
| Xaiv. Dehumidification | |
|
||||||
| Xaiv. Motion/Occupancy Sensor | |
|
||||||
| Xaiv. CO2 Sensor nrog DCV (Xav tau tswj qhov cua) | PAB-13xxxx | |||||||
| Xaiv. IP / Ethernet BACnet Kev Sib Txuas Lus | Ntxiv ib qho E rau tus lej qauv: BAC-1xxxxCEx (saib Model Code) | |||||||
| CEEB TOOM: Txhua tus qauv muaj lub sijhawm tiag tiag (saib Model Code). Ntawm cov qauv nrog CO2 sensor, cov av noo sensor yog tus qauv thiab Kev Xav Tau Tswj Qhov Cuab Yeej tsuas yog muaj thaum siv AHU, RTU, lossis HPU daim ntawv thov nrog kev hloov pauv kev lag luam kev xaiv qhib. BAC-12xxxx tsis muaj CO2 sensor. Qauv Code rau BAC-1 xmhra CEW: BAC = BACnet Device 1 = Model Series x = CO2 Sensor (3) lossis Tsis muaj (2) m = Motion Sensor (1) lossis Tsis muaj (0) h = Humidity Sensor (1) lossis Tsis muaj (0) W = Dawb Xim (tsis muaj W = lub teeb almond) r = Tus naj npawb ntawm Relay Outputs (3 lossis 6 tus qauv, lossis 5 relays & 1 triac) a = Number of Analog Outputs (3 lossis 6) C = Real-Time Clock (RTC tus qauv ntawm txhua tus qauv) E = IP / Ethernet Kev Sib Txuas Lus Xaiv (tsis muaj E = MS / TP nkaus xwb) |
||||||||
CEEB TOOM: Saib cov qauv ntawm nplooj 3. Yog xav paub meej txog cov qauv kev xaiv CO2, saib Specifications, CO2 Models Tsuas yog nyob rau nplooj 6. Saib cov FlexStat Catalog Supplement and Selection Guide.
Specifications, General
| Muab Voltage | 24 VAC (+ 20% / – 10%), Chav Kawm 2 nkaus xwb |
| Muab Lub Zog | 13 VA (tsis suav nrog relays) |
| Cov zis (3/6 lossis 6/3) | Binary outputs (NO, SPST, Daim Ntawv "A" relays) nqa 1 A max. ib relay los yog tag nrho ntawm 1.5 A ib lub txhab nyiaj ntawm 3 relays (relays 1-3 thiab 4-6) @ 24 VAC / VDC Analog outputs tsim 0-12 VDC, 20 mA siab tshaj plaws |
| Cov khoom siv sab nraud (6) | Analog 0-12 VDC (active, passive hu, 10K thermistor) |
| Kev sib txuas | Hlau clamp hom terminal blocks; 14-22 AWG, tooj liab Four-pin EIA-485 (Opt.) yim-pin Ethernet jack |
| Zaub | 64 x 128 pixel dot matrix LCD |
| Case Material | Dawb (tus qauv) los yog lub teeb almond nplaim-retardant yas |
| Qhov ntev * | 5.551 x 4.192 x 1.125 nti (141 x 106 x 28.6 hli) |
| Qhov hnyav* | 0.48 lbs. (0.22 kg) |
| Kev pom zoo | |
| UL | UL 916 Cov Khoom Siv Hluav Taws Xob Hluav Taws Xob tau teev tseg |
| BTL | BACnet Testing Laboratory teev ua Advanced Application Controller (B-AAC) |
| FCC | FCC Class B, Part 15, Subpart B thiab ua raws Canadian ICES-003 Class B** |
** Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev khiav hauj lwm yog ua raws li ob qho xwm txheej hauv qab no: (1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.
Humidity Sensor (yeem sab hauv)
| Hom Sensor | CMOS |
| Ntau yam | 0 mus rau 100% RH |
| Qhov tseeb @ 25 ° C | ± 2% RH (10 txog 90% RH) |
| Teb Sijhawm | Tsawg dua lossis sib npaug li 4 vib nas this |
Kub Sensor (tsis muaj humidity sensor)
| Hom Sensor | Thermistor, Type II |
| Qhov tseeb | ± 0.36 ° F (± 0.2 ° C) |
| Kev tiv thaiv | 10,000 ohms ntawm 77 ° F (25 ° C) |
| Kev khiav hauj lwm ntau | 48 txog 96 ° F (8.8 txog 35.5 ° C) |
Kub Sensor (nrog humidity sensor)
| Hom Sensor | CMOS |
| Qhov tseeb | ± 0.9 ° F (± 0.5 ° C) offset ntawm 40 txog 104 ° F (4.4 txog 40 ° C) |
| Kev khiav hauj lwm ntau | 36 txog 120 ° F (2.2 txog 48.8 ° C) |
Environmental txwv*
| Kev khiav haujlwm | 34 txog 125 ° F (1.1 txog 51.6 ° C) |
| Kev xa khoom | -22 txog 140 ° F (-30 txog 60 ° C) |
| Cov av noo | 0-95% RH (tsis-condensing) |
| Warranty | 5 xyoo (los ntawm mfg. hnub code) |
* CEEB TOOM: Tsuas yog cov qauv CO2 sensor-saib nplooj ntawv tom ntej rau cov lus qhia tshwj xeeb.
Specifications, Motion Sensor
Motion Sensor (Opt.) Passive infrared nrog approx. 10 meter (32.8 ko taw) ntau yam (kom paub meej txog kev ua haujlwm ntawm lub suab sensor, saib FlexStat Daim Ntawv Qhia Qhia)
Motion/Occupancy Sensor Detection Performance
Specifications, CO2 Model nkaus xwb
Dimensions hauv Inches (mm)
| Qhov ntev | 5.551 x 5.192 x 1.437 nti (141 x 132 x 36.5 hli) |
| Qhov hnyav | 0.5 lbs. (0.28 kg) |
Ib puag ncig txwv
| Kev khiav haujlwm | 34 txog 122 ° F (1.1 txog 50 ° C) |
| Kev pom zoo | FCC Class A, Part 15, Subpart B thiab ua raws Canadian ICES-003 Class A |
CEEB TOOM: Saib nplooj ntawv dhau los rau cov lus qhia tshwj xeeb uas sib xws nrog lwm cov qauv.
CEEB TOOM: Cov qauv CO2 tsis pom zoo rau cov ntawv thov nyob hauv.
| CO2 Sensor | BAC-13 xxxxxxxxx |
| Daim ntawv thov | Rau cov cheeb tsam nrog lub sijhawm nyob / tsis nyob * |
| Txoj kev | Tsis Dispersive Infrared (NDIR), nrog ABC Logic * |
| Calibration | Self-calibrates ntau lub lis piam * |
| Hom Lub Neej Ntawm Sensor | 15 xyoo |
| Kev ntsuas ntau | 400 mus rau 2000 ppm |
| Qhov tseeb (ntawm nominal kev khiav hauj lwm kub) | ± 35 ppm @ 500 ppm, ± 60 ppm @ 800 ppm, ± 75 ppm @ 1000 ppm, ± 90 ppm @ 1200 ppm |
| Kev kho qhov siab | Configurable los ntawm 0 mus rau 32,000 ko taw |
| Siab Dependence | 0.135 ntawm kev nyeem ib mm Hg |
| Kub Dependence | 0.2% FS (tag nrho teev) ib ° C |
| Kev ruaj ntseg | <2% ntawm FS dhau lub neej ntawm sensor |
| Teb Sijhawm | <2 feeb rau 90% kauj ruam hloov ib txwm |
| Thaum sov sov | <2 feeb (ua haujlwm) thiab 10 feeb (qhov tseeb tshaj plaws) |
BAC-13xxxx series siv Tsis Siv Neeg Background Calibration Logic, lossis ABC Logic, patented selfcalibration txheej txheem tsim los siv rau hauv cov ntawv thov uas cov concentrations yuav poob mus rau sab nraud ambient tej yam kev mob (kwv yees li 400 ppm) tsawg kawg peb zaug nyob rau hauv 14 hnub lub sij hawm, feem ntau thaum lub sij hawm. lub sijhawm tsis muaj neeg nyob. Nrog ABC Logic enabled, lub sensor feem ntau yuav ncav cuag nws qhov kev ua haujlwm raug tom qab 25 teev ntawm kev ua haujlwm tas mus li yog tias nws tau raug rau ambient siv theem ntawm huab cua ntawm 400 ± 10 ppm CO2. Lub sensor yuav tuav qhov tseeb specifications nrog ABC Logic enabled, muab hais tias nws yog tsawg kawg yog plaub zaug nyob rau hauv 21 hnub raug rau tus nqi siv thiab qhov kev siv tus nqi yog qhov qis tshaj concentration uas lub sensor raug. ABC Logic yuav tsum tau ua haujlwm tas li ntawm lub sensor rau lub sijhawm tsawg kawg 24 teev.
CEEB TOOM: BAC-13xxxx series, nrog ABC Logic, tau lees paub ua raws li CA Title 24, Tshooj 121(c), nrog rau cov nqe lus 4.F uas qhia meej txog qhov tseeb yuav raug tswj xyuas nyob rau hauv qhov ntev ntawm 5 xyoos yam tsis muaj recalibration thiab pom tias qhov tsis ua haujlwm sensor yuav ua rau tus maub los ua qhov kev kho kom raug.
CEEB TOOM: Saib ntxiv qhov Kev Xav Tau Tswj Qhov Cuab Yeej (DCV) nyob rau nplooj ntawv tom ntej.
Demand Control Ventilation (DCV)
Thaum siv cov ntawv thov nrog kev xaiv kev lag luam kev lag luam, peb hom kev xav tau tswj qhov cua (DCV) teeb tsa muaj:
◆ Basic—Muab DCV yooj yim, hloov cov huab cua sab nraud damper nyob rau hauv cov lus teb ncaj qha rau qib CO2 tam sim no nrog rau nws qhov chaw teeb tsa. Basic DCV muaj zog ntau dua
muaj txiaj ntsig zoo dua tsis muaj DCV txhua, thaum tswj kom txaus IAQ (Indoor Air Quality). Nws yog txoj kev DCV yooj yim tshaj plaws los teeb tsa. Txawm li cas los xij, qhov twg VOCs, radon, lossis lwm yam kuab paug dhau los thaum lub sijhawm tsis nyob (tsis muaj qhov cua), FlexStat's Standard lossis Advanced DCV configuration yog pom zoo.
◆ Tus Qauv—Thaum qhov kev teeb tsa BAC-13xxxx raug teeb tsa kom raug, qhov no ua raws li CA Title 24, Tshooj 121(c). Qhov no kuj tseem siv tau rau qhov teeb tsa zoo BAC-12xxxx nrog lub chaw taws teeb SAE-10xx CO2 sensor. Stan dard DCV, nyob rau hauv feem ntau cov mob, yog me ntsis zog npaum li Basic, tab sis nws txhim khu IAQ.
◆ Advanced—Thaum cov kev teeb tsa raug teeb tsa kom raug, qhov kev teeb tsa no ua raws li CA Title 24, Tshooj 121(c) thiab ASHRAE Standard 62.1-2007 thiab ua raws li cov lus qhia los ntawm POrtland Energy Conservation, Inc. (PECI).
Txawm hais tias Advanced DCV yog qhov nyuaj tshaj plaws rau kev teeb tsa, nws muaj zog ntau dua li Cov Qauv thaum tseem ua kom zoo dua IAQ.
Txawm hais tias BAC-12xxxx FlexStats tsis muaj qhov ntsuas CO2 builtin, lawv tseem muaj DCV tswj cov kab ke muaj. Thaum DCV qhib rau hauv cov qauv no, IN9 yog xav tias yuav txuas nrog rau sab nraud KMC SAE-10xx CO2 sensor. BAC-13xxxx FlexStats kuj muaj qhov kev xaiv sensor sab nraud, thiab yog tias siv, qhov siab tshaj plaws ntawm ob qhov kev nyeem ntawv (sab hauv vs. sab nraud) yuav raug siv los tswj DCV sequences. Lub CO2 ppm zaub (thaum qhib) kuj qhia qhov siab tshaj ntawm ob theem.
CEEB TOOM: Peb qhov DCV Configuration graphs ntawm sab laug qhia DCV tivthaiv ntawm lub teeb liab mus rau sab nraud huab cua dampua. Nyob ntawm cov xwm txheej thiab kev teeb tsa DCV, lub teeb liab mus rau damper tej zaum yuav raug tswj los ntawm Yam tsawg kawg nkaus Txoj Haujlwm, Economizer Loop, lossis lwm yam khoom. Qhov siab tshaj plaws ntawm cov khoom tseem ceeb no yog siv, tsis yog cov lej ntawm lawv. (Yog tias muaj lub tswb qis qis, txawm li cas los xij, cov teeb liab no tau dhau mus, thiab dampyog kaw.)
CEEB TOOM: DCV tsuas yog muaj thaum siv AHU, RTU, lossis HPU daim ntawv thov nrog kev xaiv kev lag luam kev lag luam qhib. Yog tsis muaj qhov kev teeb tsa, DCV yuav tsis tshwm sim hauv cov ntawv qhia zaub mov, tab sis CO2 ppm nyeem ntawv yuav (tshwj tsis yog muab tso rau hauv User Interface menu) tseem pom nyob rau sab xis ntawm cov zaub.
Daim duab hauv qab no qhia txog tus example ntawm yuav ua li cas ib tug txias setpoint thiab sab nraum cua damper txoj hauj lwm tuaj yeem tswj tau zoo los ntawm FlexStat's built-in ua ke ntawm lub sijhawm, lub suab sensor (txhim kho rau cov neeg nyob tos thiab nyob override), thiab CO2 sensor (configured rau Advanced DCV).
Yog xav paub ntxiv txog DCV configuration thiab kev ua haujlwm, mus saib hauv FlexStat Cov Lus Qhia Ua Haujlwm thiab FlexStat Application Guide.
Cov khoom siv
Damper (OAD/RTD) Actuators (Fail-Safe)
| PEB-4552 | 5.6 ft 2 max. damper area, 45 in-lb., proportional, 19 VA |
| PEB-7552 | 22.5 ft 2 max. damper area, 180 in-lb., proportional, 25 VA |
| PEB-7852 | 40 ft 2 max. damper area, 320 in-lb., proportional, 40 VA |
Mounting Kho vajtse
 |
 |
 |
| HMO-10000 | Kab rov tav los yog 4 x 4 kem kem phab ntsa mounting phaj rau BAC12xxxx qauv (tsis xav tau rau BAC-13xxxx qauv), lub teeb almond (pom) |
| HMO-10000 W | HMO-10000 |
| HPO-1602 | Hloov backplate rau BAC-12xxxx qauv |
| HPO-1603 | Hloov backplate rau BAC-13xxxx qauv (qhia) |
| SP-001 | Screwdriver (KMC branded) nrog cov hniav tiaj tus (rau terminals) thiab hex kawg (rau npog screws) |
Network Communications thiab Firmware
 |
 |
 |
| BAC-5051 E | BACnet router |
| HPO-5551 | Router Technician cable cov khoom siv |
| TSO-1104 | FlexStat firmware upgrade cov khoom siv |
| KWM-5567 | Network surge suppressor |
| KWM-5575 | Network repeater / cais tawm |
| KWM-5624 | PC cov ntaub ntawv chaw nres nkoj (EIA-485) cable (FlexStat rau USB Communicator) - suav nrog KWM-5576 |
Relays (Sab nraud)
| PEB-3112 | (HUM) SPDT, 12/24 VDC tswj relay |
Sensors (Sab nraud)
 |
 |
| CSE-110x | (FST) sib txawv cua siab hloov |
| TSW-1402 | (DAT) duct kub sensor w / 8 "rigid sojntsuam |
| TSW-1416 | (MAT) 12′ (hloov tau) duct nruab nrab temp. sensor |
| TSW-1451 | (OAT) sab nraum huab cua temp. sensor |
| TSW-6011 | Tej thaj chaw deb temp. sensor |
| SAE-10xx | Tej thaj chaw deb CO2 sensor, qhov chaw los yog duct |
| STE-1454/1455 | (W-TMP) 2 ″ pluaj-rau dej temp. sensor (nrog lossis tsis muaj qhov thaiv) |
Transformers 120-24 VAC (TX)
| XEE-6311-050 | 50 VA, dual-hub |
| XEE-6112-050 | 50 VA, dual-hub |
Valves ( Cua sov / txias / Humidification)
| VEB-43xxxBCL | (HUMV / CLV / HTV) Fail-safe tswj valve, w / MEP-4 × 52 proportional ctuator, 20 VA |
| VEB-43xxxBCK | (VLV / CLV / HTV) tswj valve w / MEP4002 proportional actuator, 4 VA |
| VEZ-4xxxxMBx | (VLV / CLV / HTV) tsis muaj kev nyab xeeb tswj valve, 24 VAC, 9.8 VA |
CEEB TOOM: Yog xav paub meej, saib cov ntaub ntawv cov khoom lag luam thiab cov lus qhia kev teeb tsa. Saib cov FlexStat Application Guide.
Dimensions thiab Connectors
CEEB TOOM: Ob-daim qauv tso cai rau thaj tsam ntxhib-hauv thiab txiav tawm ntawm kev xaim xaim mus rau lub nraub qaum yam tsis xav tau FlexStat ntawm qhov chaw-tso cai FlexStats ua ntau-
configured off-site thiab ntsaws rau hauv wired backplates tom qab lub sij hawm yog xav tau.
Cov khoom plig thiab cov ntaub ntawv khoom plig
◆ Cov khoom plig kub hauv Networked / BAS qeb ntawm Kev Sib ThamSpecifying Engineer magazine's Product of the Year kev sib tw (September 2010)
◆ Editors 'Choice khoom nyob rau hauv Commercial Building Products (Lub Kaum Hli 2010)
◆ Tus yeej hauv HVAC & Plumbing qeb ntawm Green Thinker Network's Sustainability 2012 kev sib tw (Lub Plaub Hlis 2012)
◆ FlexStat cov ntaub ntawv txhawb nqa kuj tau txais txiaj ntsig ntawm Kev Ua Haujlwm hauv xyoo 2009-2010 kev sib tw tshaj tawm kev sib tw txhawb nqa los ntawm Chicago Tshooj ntawm Lub Koom Haum rau Kev Sib Txuas Lus (Lub Plaub Hlis 2010)
Samplwm Installation
Txhawb nqa
Cov khoom plig tau txais txiaj ntsig rau kev teeb tsa, teeb tsa, daim ntawv thov, kev ua haujlwm, kev ua haujlwm, kev hloov kho dua tshiab thiab ntau ntxiv muaj nyob rau ntawm KMC Controls web xaib (www.kmccontrols.com). Txhawm rau pom txhua yam muaj files, nkag mus rau hauv KMC Partners site.
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
info@kmccontrols.com ib
© 2023 KMC Controls, Inc.
Cov ntaub ntawv / Cov ntaub ntawv
 |
KMC tswj BAC-12xxxx FlexStat Controllers Sensors [ua pdf] Cov lus qhia BAC-12xxxx FlexStat Controllers Sensors, BAC-12xxxx, FlexStat Controllers Sensors, Tswj Sensors, Sensors |
