KLLISRE DDR4 Desktop Memory

Tus neeg siv phau ntawv qhia thiab kev teeb tsa
Download li Word Document

Khoom Tshajview

KLLISRE Desktop DDR4 Memory modules yog tsim los rau kev ua haujlwm siab, muab kev ceev thiab kev ntseeg tau zoo rau kev ua si, kev tsim cov ntsiab lus, thiab kev ua haujlwm niaj hnub. Cov modules no muaj cov khoom siv hluav taws xob zoo nkauj rau kev txhim kho thermal kev ua haujlwm thiab kev ruaj ntseg.

Specifications

• Specification Paub meej
• Memory Type DDR4 Desktop Memory (Unbuffered)
• Available Capacities 16GB (Single Module)
• Available Frequencies 3200MHz, 3600MHz
• Voltage1.2 wb
• Pin Configuration 288-pin
• Error Correction Non-ECC
• Registered Unbuffered
• CAS Latency CL21 (depending on frequency)
• Form Factor DIMM (Dual In-line Memory Module)
• Heat Spreader Yes, aluminum heat spreader
• Compatibility Desktop motherboards with DDR4 slots

Cov Khoom Siv Tau Zoo

Pom zoo Motherboards
KLLISRE Desktop DDR4 Memory yog sib xws nrog ntau yam ntawm desktop motherboards:

• Intel 600, 500, thiab 400 series chipsets (Z690, B660, H610, Z590, B560, thiab lwm yam)
• AMD 500 and 400 series chipsets (X570, B550, X470, B450, etc.)
• Cov chipsets qub uas txhawb nqa DDR4 nco

Cov txheej txheem pom zoo

Lub cim xeeb no ua haujlwm nrog Intel thiab AMD platforms:

• Intel Core i3, i5, i7, i9 processors (10th, 11th, 12th, 13th Gen)
• AMD Ryzen 3, 5, 7, 9 processors (3000, 4000, 5000 series)

Memory Configuration

Rau kev ua haujlwm zoo:

• Txhim kho lub cim xeeb hauv khub rau kev ua haujlwm dual-channel (xyuas cov phau ntawv motherboard kom raug qhov qhib)
• Txhawm rau kom tau txais txiaj ntsig zoo tshaj plaws, siv cov cim nco zoo ib yam nrog tib lub peev xwm thiab zaus
• Qhib XMP / DOCP hauv BIOS kom ua tiav kev tshaj tawm ceev

Nco tseg: Ntau zaus nco (3600MHz) yuav xav tau lub CPU thiab motherboard tsis ntev los no kom ua tiav qhov nrawm. Nco ntsoov xyuas koj lub motherboard's QVL (Qualified Vendor List) kom sib haum.

Daim ntawv qhia kev teeb tsa

Ceeb toom: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components.

1. Power Down the System
   Shut down the computer completely and disconnect all power cables from the power supply.
2. Open the Computer Case
   Remove the side panel of your computer case to access the motherboard.
3. Locate Memory Slots
   Identify the memory slots on your motherboard. Consult your motherboard manual for optimal slot population order (usually slots 2 and 4 for dual channel).
4. Release Retention Clips
   Open the retention clips at both ends of the memory slot by pushing them outward.
5. Align the Memory Module
   Align the notch in the memory module with the key in the memory slot to ensure proper orientation.
6. Nruab lub Memory
   Firmly press down on the memory module until the retention clips snap
   into place automatically.
7. Repeat for Additional Modules
   If installing multiple modules, repeat the process for each module, following the motherboard’s recommended population sequence.
8. Close the System
   Replace the computer case panel, reconnect all cables, and power on the system.

Nco tseg: Tom qab txhim kho lub cim xeeb tshiab, nkag mus rau lub system BIOS / UEFI kom paub tseeb tias txhua lub cim xeeb raug kuaj pom thiab pab kom XMP / DOCP kom ua tiav qhov kev tshaj tawm ceev.

Kev daws teeb meem

System yuav tsis khau raj tom qab installation
Tej yam ua tau: lub cim xeeb tsis zoo, lub cim xeeb tsis sib haum, BIOS xav tau hloov tshiab.
Cov kev daws teeb meem: Rov kho lub cim xeeb modules, tshem tawm CMOS, hloov kho motherboard BIOS rau qhov tseeb version.

Tsuas pom ib nrab nco xwb
Tej yam ua tau: lub cim xeeb tsis zoo, cov neeg nco tsis sib xws, lub cim xeeb tsis raug.
Cov kev daws teeb meem: Rov pib lub cim xeeb modules, sab laj phau ntawv qhia motherboard rau cov pej xeem kom raug, sim cov modules hauv ntau qhov sib txawv.

Nco tsis khiav ntawm Advertised ceev (3200/3600MHz)
Vim li cas qhov no tshwm sim: Los ntawm lub neej ntawd, DDR4 nco khiav ntawm kev ceev ceev JEDEC tus qauv (feem ntau 2133MHz lossis 2400MHz). Txhawm rau ua tiav qhov kev tshaj tawm nrawm dua, koj yuav tsum ua kom XMP (Extreme Memory Profile) rau Intel systems lossis DOCP (Direct Overclock Profile) rau AMD systems hauv BIOS.
Lwm yam laj thawj: Qee cov CPUs qub lossis cov motherboards yuav tsis txhawb lub cim xeeb siab dua. Lub cim xeeb tswj hauv koj lub CPU muaj kev txwv, thiab motherboard topology tuaj yeem cuam tshuam qhov ua tau zoo tshaj plaws.

Kev daws:

1. Enter BIOS/UEFI settings during boot (usually by pressing DEL or F2)
2. Find memory settings (often under “Advanced” or “Overclocking” menu)
3. Enable XMP (Intel) or D.O.C.P. (AMD)
4. Xaiv tus tsim nyog profile rau koj lub cim xeeb ceev
5. Save changes and exit BIOS
6. If system becomes unstable, update BIOS to latest version
7. If problems persist, you may need to manually set speed and timings

System Instability lossis Crashes

Tej yam ua tau: Kev teeb tsa lub cim xeeb tsis sib xws, overheating, lub zog tsis txaus.
Cov kev daws teeb meem: Load BIOS optimized defaults, xyuas kom zoo system txias, xyuas kom meej lub hwj chim txaus, sim nrog ib tug module ntawm ib lub sij hawm.

Blue Screen yuam kev

• Tej yam ua tau: Memory compatibility issues,Processor incompatibility, incorrect timings.
• Kev daws teeb meem: Test each module individually, run memory diagnostic tools (Windows Memory Diagnostic or MemTest86), adjust BIOS memory settings.

Nco tseg: If problems persist, test each memory module individually to identify potential faulty modules. Contact KLLISRE support if you suspect a defective product

Warranty Information

• KLLISRE Desktop DDR4 Memory modules raug them los ntawm ib xyoos lav. Lub warranty npog qhov tsis xws luag hauv cov ntaub ntawv thiab kev ua haujlwm raws li kev siv ib txwm. Cov ntaub ntawv pov thawj ntawm kev yuav khoom yog xav tau rau kev pabcuam warranty.
• Rau kev lees paub lossis kev txhawb nqa kev pabcuam, thov hu rau KLLISRE kev txhawb nqa nrog koj cov ntaub ntawv yuav khoom thiab cov lus piav qhia ntawm qhov teeb meem.
• This warranty does not cover damage resulting from accident, misuse, abuse, improper installation, or unauthorized modifications. 2023 KLLISRE. All rights reserved.
• KLLISRE is a registered trademark. Specifications are subject to change without notice.

Cov lus nug nquag

What should I do if my system does not boot after installing KLLISRE Desktop DDR4 Memory?

Ensure that the modules are correctly seated in the memory slots. Try reseating the modules or testing them one at a time to identify any faulty module. Check compatibility with your motherboard and ensure BIOS settings are configured correctly.

Cov ntaub ntawv / Cov ntaub ntawv

KLLISRE DDR4 Desktop Memory [ua pdf] Tus neeg siv phau ntawv 16GB 3200MHz, 16GB 3600MHz, DDR4 Desktop Memory, DDR4, Desktop Memory, Nco

Cov ntaub ntawv

• Cov neeg siv phau ntawv