Keri Systems NXT-RM3 Reader Interface Module
INSTALLATION GUIDE
1.0 Wiring thiab Layout Diagrams
1. 1 Reader Interface Module (RIM} Diagram
Nco tseg: Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class A cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov llmlts no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo thaum cov cuab yeej ua haujlwm hauv ib puag ncig kev lag luam. Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li phau ntawv qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua.
1.2 MS Reader Wiring Diagram
1.3 Wiegand Reader Wiring Diagram (ib kab LED)
1.4 Wiegand Reader Wiring Diagram (Dual Line LED)
2.0 Kev nyeem ntawv hauv av
Raws li pom nyob rau hauv daim duab nyeem ntawv, cov ntaub thaiv npog / ntws hlau ntawm txhua tus nyeem ntawv / peripheral cables
Yuav tsum tau txiav mus rau ib qho ntawm cov ntsiab lus hauv qab no
- lub teeb ntsuab hauv av lug (J6) ntawm tus maub los (daim duab qhia),
- txhua lub kaum ntse ntse txuas tus maub los rau hauv lub thawv,
- Pin 3 of TB10,
- los yog av lug ntawm lub enclosure.
CEEB TOOM: Ua tsis tiav lub ntiaj teb hauv av kom zoo tus nyeem ntawv / peripheral ntws xaim tuaj yeem ua rau kev sib txuas lus tsis txaus ntseeg lossis kev ua haujlwm ntawm qhov txuas txuas.
3.0 Specifications
3.1 Loj
- Thaum mounted ntawm NXT Controller
- 2.50 nti siab los ntawm 2.0 nti dav los ntawm 1.0 nti sib sib zog nqus, tsis suav nrog cov hlua txuas
- 6.4 cm x 5.0 cm x 2.5 cm
3.2 Kev xav tau ntawm lub zog / tam sim no
- 10-14 VDC @ 100 mA (qhov siab tshaj plaws tam sim no kos ntawm 12 VDC)
3.3 Cov xwm txheej ua haujlwm
- 32 ° F txog 150 ° F (0 ° C txog 60 ° C) - 0% txog 90% txheeb ze humidity, tsis-condensing
3.4 Cable Requirements
Tag nrho RIM rau tus nyeem ntawv cable ntev yuav tsum tsawg dua 500 ko taw.
Nco tseg: Nyob rau hauv ntev cable khiav, cable kuj ua rau poob hauv voltage thaum kawg ntawm txoj kab khiav. Xyuas kom tseeb tias lub zog tsim nyog thiab tam sim no rau koj lub cuab yeej muaj nyob rau ntawm lub cuab yeej thaum kawg ntawm kev khiav cable.
a. Cov ntsuas hnyav dua li cov npe teev tseg ib txwm ua tau.
4.0 RIM Configuration
RIM tso cai rau Kari MS lossis Wiegand cov neeg nyeem / ntawv pov thawj kom lees paub thiab nyeem los ntawm NXT cov tswj hwm. Lub neej ntawd RIM configuration yog rau MS-Series Reader siv ob kab LED tswj (ntau xim). Ua cov kauj ruam hauv qab no los teeb tsa RIM rau koj daim ntawv thov. Xa mus rau Daim Duab 1 ntawm nplooj ntawv 3 rau kev hloov thiab LED qhov chaw, thiab cov lus ntawm nplooj ntawv XNUMX rau kev hloov thiab cov ntsiab lus LED.
4.1 Nkag mus Programming hom
1. Tuav ob lub SW1 thiab SW2 li ntawm ob feeb.
2. Tag nrho xya LEDs ntawm RIM yuav flash peb zaug.
3. Tso tawm ob qho tib si SW1 thiab SW2, thiab chav tsev tam sim no nyob rau hauv hom kev teeb tsa.
4. Ib zaug nyob rau hauv configuration hom, SW1 cov kauj ruam ntawm kev xaiv - SW2 xaiv qhov kev xaiv uas tam sim no tso tawm.
4.2 Xaiv Koj Hom Nyeem Ntawv
Cov Keri MS (D4 ), Wiegand (D5), Keri Keypad (D6), thiab Wiegand Keypad/Reader Combo (D7) hom tau txais kev txhawb nqa tam sim no.
1. Nias SW1 mus rau kauj ruam los ntawm cov hom nyeem ntawv txhawb nqa. Txhua qhov xovxwm ntawm SW1 yuav nqis mus rau hom nyeem ntawv tom ntej.
2. Thaum tus nyeem ntawv xav tau hom LED yog illuminated, nias SW2. Hom nyeem ntawv tau teeb tsa tam sim no.
3. Yog tias koj tau xaiv Wiegand (D5), Keri Keypad (D6), lossis Wiegand Combo (D7) nyeem ntawv, chav tsev tam sim no tau npaj los teeb tsa RIM's LED kab tswj hom.
Hla mus rau ntu 3.3 rau cov lus qhia kev teeb tsa.
4. Yog tias koj tau xaiv Keri MS (D4) nyeem ntawv hom, nias SW2 ob zaug. Tam sim no RIM tau teeb tsa thiab lub tsev reboots kom lees txais cov kev txwv tshiab. Tag nrho xya LEDs yuav nyem peb zaug thaum lub tsev reboots nrog cov kev teeb tsa tshiab. Thaum cov LEDs nres flashing, chav tsev ua haujlwm.
Nco tseg: Tsis txhob tshem lub zog ntawm RIM thaum lub sijhawm rov pib dua. Poob lub zog thaum rebooting yuav invalidate tej configuration hloov koj tau ua.
4.3 Xaiv Koj Wiegand Reader LED Kab teeb tsa
Dual-line tswj yog lub neej ntawd RIM teeb tsa rau LED kab teeb tsa. Qhov no yog qhov xav tau teeb tsa rau Keri Keypad nyeem ntawv. Ua cov kauj ruam hauv qab no los hloov ntawm ib kab thiab dual-kab LED tswj.
1. Nias SW1 mus rau kauj ruam los ntawm kev txhawb nqa LED kab teeb tsa hom. Txhua qhov xovxwm ntawm SW1 yuav nqis mus rau hom kab LED tom ntej.
2. Thaum xav tau LED kab tswj hom LED yog illuminated, nias SW2. LED kab tswj hom tau teeb tsa tam sim no.
3. Nias SW2 ob zaug thiab tam sim no RIM tau teeb tsa thiab lub tsev reboots kom lees txais cov kev txwv tshiab.
4. Lub RI M's LEDs yuav tawm li ntawm 10 vib nas this raws li lub tsev reset nws tus kheej. Tag nrho xya LEDs yuav nyem thaum lub tsev tab tom rov pib dua nrog cov kev teeb tsa tshiab. Thaum cov LEDs nres flashing, chav tsev ua haujlwm.
Nco tseg: Tsis txhob tshem lub hwj chim ntawm RIM thaum lub sij hawm reboot txheej txheem. Poob lub zog thaum rebooting yuav invalidate tej configuration hloov koj tau ua.
4.4 Txheeb xyuas RIM Configuration
Cov ntawv nyeem sib xws thiab kab tswj hom LEDs tau teeb pom kev thaum lub sijhawm ua haujlwm. Txhawm rau kom paub meej tias koj qhov kev teeb tsa, xa mus rau cov duab kos thaum pib ntawm daim ntawv rau kev hloov thiab LED qhov chaw, thiab cov lus hauv qab no rau kev hloov thiab LED txhais.
a. Cov lus siv tau rau RI.M Finnware v03.01.06 thiab tom qab ntawd. Thov upgrade koj firmware raws li qhov tsim nyog.
https://help.kefisys.com/portal/en/kb/articles/rm3-installation#10Wiring_and_Layout_Diagrams
Cov ntaub ntawv / Cov ntaub ntawv
 |
Keri Systems NXT-RM3 Reader Interface Module [ua pdf] Daim ntawv qhia kev teeb tsa NXT-RM3 Nyeem Ntawv Interface Module, Nyeem Ntawv Interface Module, Interface Module, Module |
