INSTRUo Dail Eurorack Quantiser thiab MIDI Interface Module

Specifications:

• Dav: 4 HP
• Lub hwj chim: + 12V (rov qab polarity tiv thaiv)
• Interface: CV Input, Signal Throughput, Output, Output Indicator, Trigger Output, Moos Input, Gate Output, Interface Selection Toggle
• Kev sib txuas: USB 2.0 Hom A Chaw nres nkoj, TRS MIDI Input

Cov ntaub ntawv khoom

Lub Quantiser yog ntau yam module uas ua haujlwm ob qho tib si raws li quantiser thiab qhov tseeb adder. Nws tso cai rau kev txhais cov nplai hauv zos lossis ntawm MIDI cov tswv yim. USB Host chaw nres nkoj ua rau muaj kev sib koom ua ke nrog cov khoom siv hauv chav kawm kom haum rau cov suab paj nruag tam sim thiab kev tsim ua ntu zus. Lub precision adder feature muab qhov tseeb teeb liab offsetting los ntawm lub chromatic intervals, ua rau nws yog ib tug zoo heev khub rau sequencers los yog 1V / octave qhov chaw.

Kev teeb tsa:

1. Xyuas kom tseeb tias Eurorack synthesizer system raug kaw.
2. Muab 4 HP ntawm qhov chaw hauv koj rooj plaub Eurorack.
3. Txuas lub hwj chim cable, xyuas kom meej polarity.

Nco tseg: Rov qab polarity tiv thaiv yog suav nrog.

Cov lus qhia siv

CV Input (CV):
CV Input lees txais kev tswj hwm bipolar voltage rau quantisation.

Kev Tshaj Tawm Tshaj Tawm (hauv):
Lub Signal Throughput input tso cai rau kev tswj hwm ntxiv voltage tswv yim.

Output (Tawm):
Cov Output generates summed teeb liab ntawm quantized CV Input thiab Signal Throughput nrog rau cov Precision Adder tso zis.

Qhov taw qhia tso zis:
LED Output Indicator illuminates lub teeb liab tam sim no ntawm cov Output.

Cov zis tso zis: |
Lub Trigger Output generates ib lub teeb liab tshwm sim nrog txhua quantised voltage hloov tshiab.

Clock Input (Clk):
Lub Clock Input ua haujlwm raws li lub moos sab nraud rau kev xaiv sample og stages.

Rooj vag tso zis:

Lub Gate Output ua rau lub rooj vag teeb liab raws li MIDI cov lus ceeb toom tau txais ntawm USB 2.0 Hom A Chaw nres nkoj lossis TRS MIDI Input.

Interface Xaiv Toggle:

Lub Interface Xaiv Toggle hloov ntawm cov nplooj ntawv ua haujlwm cuam tshuam rau kev ua haujlwm thiab kev tswj hwm.

FAQ:

• Q: Kuv puas tuaj yeem txhais cov nplai sab nraud ntawm MIDI?
  A: Yog lawm, Quantiser tso cai rau kev txheeb xyuas cov nplais hauv zos thiab ntawm MIDI cov tswv yim ntxiv rau kev hloov pauv hauv kev sib xyaw.
• Q: Yuav ua li cas lub precision adder feature txhim khu lub teeb liab ua?
  A: Lub precision adder enables qhov tseeb teeb liab offsetting los ntawm lub chromatic intervals, ua rau nws yog ib qho tseem ceeb cov cuab yeej rau meej transposition nyob rau hauv koj lub cev.

Kev piav qhia

• Instruō dàil yog qhov kev daws teeb meem siab tshaj plaws, qhov tseeb adder, MIDI-rau-CV interface, thiab USB MIDI Host nrog rau daim ntawv me me uas haum rau
  txhua qhov system.
• Raws li quantiser, cov nplai tuaj yeem txhais hauv zos thiab sab nraud ntawm MIDI. Qhov chaw nres nkoj USB Host yuav lees txais thiab cov khoom siv hluav taws xob raws li chav kawm muab kev yooj yim thiab nrawm rau cov suab paj nruag thiab cov kab ke.
• Raws li qhov tseeb adder, cov teeb liab uas twb muaj lawm tuaj yeem raug offset los ntawm txhua lub sijhawm chromatic. Hloov ib yam dab tsi nrog qhov tseeb siv lub calibrated buffered throughput uas khiav parallel mus rau lub cav quantiser. Qhov no ib leeg ua rau tus khub zoo rau txhua qhov sib txuas lossis 1V / octave qhov chaw nyob hauv ib qho system.
• Tsis yog ib qho rov ua dua octave ntawm quantised sau ntawv ib qho kev txwv. dàil nta ib lub cav bipolar quantiser tag nrho los ntawm qhov uas txhua qhov ntau-octave spanning nplai / chord / arpeggio tuaj yeem koom nrog tam sim ntawm koj lub MIDI keyboard. Cov qauv kuj tseem tuaj yeem raug programmed onboard nrog precision nrog lub peev xwm los pib sau los ntawm ntau yam ntawm cov ntsiab lus tseem ceeb thiab me.
• Daim ntawv me me, loj feature teeb! dàil yuav haum txhua qhov ntsuas ntawm qhov system ntxiv qhov yooj yim thiab nrawm rau koj cov kev xav tau melodic.

Nta

• Multi-octave qauv quantiser
• On-board thiab MIDI controllable scale programming
• Chromatic interval precision adder
• MIDI-rau-CV interface
• USB MIDI host rau chav kawm raws li kev tswj hwm
• Xws li 2 HP MIDI Expander
• Xws li 5-pin DIN rau TRS MIDI Hom A adapter
• TRS MIDI Hom A thiab Hom B sib raug zoo

Kev teeb tsa

1. Paub meej tias Eurorack synthesizer system raug kaw.
2. Nrhiav 4 HP ntawm qhov chaw hauv koj rooj plaub Eurorack synthesizer. Nrhiav ib qho ntxiv, tab sis xaiv tau, 2 HP ntawm qhov chaw hauv koj cov ntaub ntawv Eurorack synthesizer rau qhov suav nrog.
3. Yog tias qhov kev xaiv nthuav dav yog qhov xav tau, txuas rau 8 tus pin sab ntawm IDC nthuav dav cable mus rau 2 × 4 tus pin headers nyob rau sab nraum qab ntawm lub ntsiab module, paub meej tias cov kab liab liab ntawm cov kab txuas ntxiv nrog rau qhov taw qhia ntawm lub ntsiab module. .
4. Yog tias qhov kev xaiv nthuav dav yog qhov xav tau, txuas rau 8 tus pin sab ntawm IDC nthuav dav cable mus rau 2 × 4 tus pin headers nyob rau sab nraum qab ntawm qhov nthuav dav module, lees paub tias cov kab liab liab ntawm cov kab txuas ntxiv nrog rau qhov taw qhia ntawm qhov nthuav dav module. .
5. Yog tias qhov kev xaiv nthuav dav yog qhov xav tau, txuas rau Expansion Back Jacks nyob rau sab nraum qab ntawm lub ntsiab module thiab nthuav dav ua ke nrog rau 3.5mm TRS Cable.
6. Txuas 10 tus pin sab ntawm IDC fais fab cable mus rau 2 × 5 tus pin header nyob rau sab nraum qab ntawm lub module, paub meej tias cov kab liab liab ntawm lub hwj chim cable txuas nrog -12V.
7. Txuas 16 tus pin sab ntawm IDC fais fab cable mus rau 2 × 8 tus pin header ntawm koj lub zog hluav taws xob Eurorack, lees tias cov kab liab liab ntawm lub hwj chim cable txuas nrog -12V.
8. Mount Instruō dàil hauv koj rooj plaub Eurorack synthesizer.
9. Fais fab koj lub Eurorack synthesizer rau.

Nco tseg:

• Cov module no muaj kev tiv thaiv rov qab polarity.
• Inverted installation ntawm lub hwj chim cable yuav tsis ua puas lub module.

Specifications

• Dav: 4 HP + 2 HP MIDI Expansion Module
• Qhov tob: 32mm
• + 12V: 100mA *
• -12V: 8mA

Tam sim no kos rau ntawm +12V yuav nce thaum lub hwj chim ntawm USB ntaus ntawv.
dàil (verb) faib ib yam dab tsi ua ntu. (noun) ib feem ntawm tag nrho.

Ntsiab

1. CV Input (CV)
2. Teeb liab hla dhau (hauv)
3. Tso zis (Out)
4. Qhov taw qhia tso zis
5. Kev Tawm Tsim Tawm
6. Lub moos nkag (Clk)
7. Rooj vag tso zis
8. Interface Xaiv Toggle
9. Slider
10. Khawm 1
11. Khawm 2
12. Voltage Indicators
13. Expansion Back Jack
14. TRS MIDI Input
15. USB 2.0 Hom A Chaw nres nkoj (USB)
16. Expansion Back Jack
17. A|B Hloov
18. USB Hom B Mini Chaw nres nkoj

DELAY

• CV Input (CV): CV Input yog kev tswj hwm bipolar voltage input rau quantiser.
  • Tswj voltage tam sim no ntawm CV Input yuav quantised rau qhov programmed scale (Saib qhov Programming Interface rau cov lus qhia ntxiv).
  • Input Range: -/ + 10V
• Teeb liab hla dhau (Nyob rau hauv): The Signal Throughput is a bipolar control voltage tswv yim.
  • Cov teeb liab tam sim no ntawm Kev Tshaj Tawm Tshaj Tawm yuav suav nrog voltage tsim los ntawm quatiser thiab tuaj yeem siv rau kev hloov pauv.
  • Qhov Precision Adder kev tsis ncaj ncees yuav suav nrog ntawm Cov Tso Tawm.
  • Input Range: -/ + 10V
• Output (Out): Cov Output yog ib tug bipolar tswj voltage tso zis uas ua rau lub summed teeb liab ntawm lub quantised CV Input, lub Signal Throughput thiab lub Precision Adder.
  • Cov zis ntau: -/ + 10V
• Output Indicator: Qhov taw qhia tso zis muab LED illumination ntawm lub teeb liab tam sim no ntawm cov zis.
  • Raws li lub teeb liab nce los ntawm 0V mus rau qhov zoo, qhov ntsuas qhov tso zis teeb pom kev dawb thiab nce hauv qhov ci.
  • Raws li lub teeb liab nce los ntawm 0V mus rau qhov tsis zoo, qhov ntsuas qhov tso zis teeb pom kev zoo amber thiab nce hauv qhov ci.
• Trigger Output: Lub Trigger Output generates lub teeb liab nrog txhua qhov hloov tshiab hauv quantised voltage.
  • Tso zis Voltagib: 5v
• Clock Input (Clk): Lub Clock Input yog lub moos sab nraud rau lub cav quantiser qhov kev xaiv sample og stage.
  • Ib qho teeb meem sab nraud nce-ntug tam sim no ntawm Clock Input tso cai rau sab nraud clocking ntawm liample thiab tuav siv tom qab lub cav quantiser, ua ntej slew yog thov. THIAB logic yog siv yog hais tias tus quantiser muaj ib daim ntawv tshiab thiab ib tug nce ntug tau txais ntawm lub moos Input, ib tug trigger teeb liab yuav raug tsim nyob rau hauv lub Trigger Output thiab cov zis yuav hloov tshiab.
• Gate Output: Lub Gate Output tsim lub rooj vag teeb liab rau lub sijhawm ntawm ib qho kev txhawb nqa MIDI cov lus ceeb toom tam sim no ntawm USB 2.0 Hom A Chaw nres nkoj lossis TRS MIDI Input ntawm MIDI Expander (Saib MIDI-rau-CV Interface / USB MIDI Host ntu rau ntaub ntawv ntxiv).
• Interface Xaiv Toggle: Qhov Kev Xaiv Interface Toggle xaiv cov nplooj ntawv ua haujlwm ua haujlwm (Saib qhov Programming Interface, Quantiser Interface, thiab Precision Adder Interface seem kom paub ntau ntxiv).
  • Yog hais tias lub toggle nyob rau hauv nws txoj hauj lwm sab laug, Programming hom yog xaiv.
  • Yog hais tias lub toggle nyob rau hauv nws txoj hauj lwm hauv nruab nrab, Quantiser hom raug xaiv.
  • Yog hais tias lub toggle nyob rau hauv nws txoj hauj lwm, Precision Adder hom raug xaiv.
• Slider: Lub Slider yog ntau hom kev tuav tswj.
  • Khawm 1: Khawm 1 yog ntau lub hom phiaj tswj kev tswj hwm (Saib hom Programming, Quantiser Hom, thiab Precision Adder Mode seem kom paub ntau ntxiv).
  • Khawm 2: Khawm 2 yog ntau lub hom phiaj tswj kev tswj hwm (Saib hom Programming, Quantiser Hom, thiab Precision Adder Mode seem kom paub ntau ntxiv).
  • Voltage Indicators: The Voltage Indicators muab LED illumination ntawm voltage qhov tseem ceeb muaj nyob rau hauv Quantiser thiab Precision Adder Hom (Saib hom Programming, Quantiser Hom, thiab Precision Adder Mode seem rau cov lus qhia ntxiv).
  • Expansion Back Jack: Lub Expansion Back Jack yog 3.5mm TRS jack siv rau kev sib txuas nrog MIDI Expander rau lub ntsiab module.
• MIDI nthuav dav
  • TRS MIDI Input (MIDI): TRS MIDI Input tso cai rau MIDI-rau-CV hloov dua siab tshiab ntawm DAW lossis MIDI maub los.
    (Saib tshooj MIDI-rau-CV Interface kom paub ntau ntxiv). USB 2.0 Hom A Chaw nres nkoj (USB): USB 2.0 Hom A Chaw nres nkoj tso cai rau USB MIDI hosting ntawm MIDI Controller. (Saib USB MIDI Host seem kom paub ntau ntxiv).
  • Nws raug nquahu kom siv MIDI controllers uas yog lub tsheb npav tsav tsheb thiab ua raws li chav kawm.
  • Nws yuav tsum tau muab sau tseg tias tam sim no kos rau ntawm +12V rail yuav txawv nyob ntawm seb qhov yuav tsum tau tam sim no ntawm cov cuab yeej txuas.
• Expansion Back Jack: Lub Expansion Back Jack yog 3.5mm TRS jack siv rau kev sib txuas nrog MIDI Expander rau lub ntsiab module.
• A|B Hloov: A|B Hloov hloov qhov sib txuam ntawm dàil ua haujlwm nrog TRS MIDI Hom A adapters (nrog) lossis TRS MIDI Hom B adapters.
  • Qhov hloov pauv tau teem rau Hom A kev sib raug zoo los ntawm lub neej ntawd.

Lub cajmeem kev sib tshuam

Programming hom tso cai rau kev ua kom thiab deactivation ntawm chromatic intervals rau quantiser thiab precision adder. Nws kuj tso cai rau kev xaiv ntawm preset teev

Voltage Qhia

• Lub activated quantiser chromatic interval yog qhia los ntawm amber LED illumination ntawm cov Vol.tage Qhov taw qhia, thiab khawm 1 yuav hloov pauv los ntawm lub teeb pom kev tsaus nti amber mus rau lub teeb pom kev zoo nkauj amber thaum lub Slider tau mus rau nws qhov chaw.
• Ib qho activated precision adder chromatic interval yog qhia los ntawm dawb LED illumination ntawm cov Vol.tage Qhov Taw Qhia, thiab Khawm 2 yuav hloov ntawm lub teeb pom kev zoo dull mus rau lub teeb pom kev zoo nkauj thaum lub Slider tau mus rau qhov chaw sib thooj.
• Yog tias daim ntawv chromatic tau qhib rau ob qho tib si quantiser thiab precision adder, nws yog qhia los ntawm "mos dawb" (ua ke ntawm ob qho tib si amber thiab dawb LEDs) illumination ntawm cov Vol.tage Qhov taw qhia. Khawm 1 thiab Khawm 2 kuj tseem yuav hloov pauv los ntawm lub teeb pom kev tsis zoo rau lub teeb ci ntsa iab thaum lub Slider tau mus rau qhov chaw chromatic sib thooj.
• Yog tias daim ntawv chromatic deactivated rau ob qho tib si quantiser thiab precision adder, nws yog qhia los ntawm tsis muaj illumination ntawm qhov sib thooj Voltage Qhov taw qhia thiab khawm 1 thiab khawm 2 yuav hloov los ntawm lub teeb ci ntsa iab mus rau lub teeb pom kev tsaus ntuj thaum lub Slider tau mus rau qhov chaw sib thooj.

Programming Chromatic Intervals

• Teem lub Interface Xaiv Toggle rau nws txoj hauj lwm sab laug.
• Saib qhov Voltage Indicators raws li ib tug chromatic keyboard.
• Siv lub Slider los taw qhia qhov xav tau chromatic daim ntawv thiab nias khawm 1 kom qhib thiab kaw nws rau quantiser thiab nias khawm 2 kom qhib thiab kaw nws rau qhov tseeb adder.

Luag thiab sau ua kom muaj chromatic intervals

• Teem lub Interface Xaiv Toggle rau nws txoj hauj lwm sab laug.
• Siv lub Slider los mus rau qhov xav tau chromatic daim ntawv thiab xyuas kom meej tias daim ntawv yog deactivated.
• Yog tias nws tau qhib, nias khawm 1 kom deactivate nws rau lub quantiser lossis nias khawm 2 kom deactivate nws rau qhov tseeb adder.
• Nias thiab tuav khawm 1 thiab txav lub Slider nce thiab / lossis nqis los qhib cov ntawv chromatic uas nyob ib sab rau cov quantiser.
• Nias thiab tuav khawm 2 thiab txav lub Slider nce thiab / lossis nqis los qhib cov ntawv chromatic uas nyob ib sab rau qhov tseeb adder.
• Tso Khawm 1 thiab/lossis Khawm 2.

Luag thiab sau Deactivation ntawm Chromatic Intervals

• Teem lub Interface Xaiv Toggle rau nws txoj hauj lwm sab laug.
• Siv lub Slider mus rau qhov tsis xav tau chromatic daim ntawv thiab xyuas kom meej tias daim ntawv qhib.
• Yog tias nws tsis ua haujlwm, nias khawm 1 kom qhib nws rau quantiseror nias khawm 2 kom qhib nws rau qhov tseeb adder.
• Nias thiab tuav khawm 1 thiab txav lub Slider nce thiab / lossis nqis kom tsis txhob muaj cov ntawv chromatic uas nyob ib sab rau quantiser.
• Nias thiab tuav khawm 2 thiab txav lub Slider nce thiab / lossis nqis los qhib cov ntawv chromatic uas nyob ib sab rau qhov tseeb adder.
• Tso Khawm 1 thiab/lossis Khawm 2.

Programming Voltages via MIDI

• Txuas lub MIDI maub los rau dàil ntawm USB Hom A Chaw nres nkoj lossis theTRS MIDI Input ntawm MIDI Expander.
• Siv MIDI maub los xaiv thiab tshem tawm cov ntawv los ntawm kev ua si chords.
• Nias thiab tuav txhua daim ntawv ua ke kom qhib qhov sib thooj voltage.
• Nrog cov ntawv tuav cia, toggle ib daim ntawv los ntawm kev ntxiv nws rau lub suab nrov (cov ntawv yuav tsum tau txhawb nqa rau> 200ms rau latchon). Txhawm rau deactivate tus coj voltage ua si daim ntawv staccato (cov ntawv ceeb toom yuav tsum yog <200ms).

Xaiv Preset Major Scales

• Teem lub Interface Xaiv Toggle rau nws txoj hauj lwm sab laug.
• Teem lub Slider rau nws qhov chaw qis tshaj.
• Nias thiab tuav khawm 1 rau lub quantiser thiab/lossis Khawm 2 rau qhov kev txiav txim siab ntxiv thiab txav lub Slider mus rau nws txoj haujlwm siab tshaj plaws, tom qab ntawd txoj haujlwm qis tshaj, tom qab ntawd txoj haujlwm siab tshaj dua.
• Ib tug loj triad yuav illuminated ntawm lub Voltage Indicators.
• Nrog lub pob tseem nias cia, txav lub Slider mus rau nws qhov qis tshaj plaws, tom qab ntawd txoj haujlwm siab tshaj plaws rau autofill qhov ntsuas qhov loj tom ntej.
• Ua kom rov ua qhov taw qhia no kom txog thaum xaiv qhov loj loj uas xav tau.
• Tso lub khawm.

Preset loj scale yog:

• Major Triad
• Major Pentatonic
• Major 7
• Ionian (zeeg)
• Lydian
• Mixolydian
• Ionian #5 (Augmented Major)
• Lub Tone

Xaiv Preset Minor Scales

• Teem lub Interface Xaiv Toggle rau nws txoj hauj lwm sab laug.
• Teem lub Slider rau nws qhov chaw siab tshaj.
• Nias thiab tuav khawm 1 rau lub quantiser thiab/los yog khawm 2 rau qhov precision adder thiab txav lub Slider mus rau nws qis tshaj txoj hauj lwm, ces siab tshaj txoj hauj lwm, ces qis tshaj txoj hauj lwm, ces siab tshaj txoj hauj lwm dua.
• Ib tug me triad yuav illuminated ntawm Voltage Indicators.
• Nrog lub pob tseem nias cia, txav lub Slider mus rau nws qhov qis tshaj plaws, tom qab ntawd txoj haujlwm siab tshaj plaws rau autofill lub preset me me teev tom ntej.
• Ua kom rov ua qhov taw qhia no kom txog thaum xaiv qhov me me uas xav tau.
• Tso lub khawm.

Preset loj scale yog:

• Minor Triad
• Me nyuam yaus 7
• Me Me Pentatonic
• Txom nyem
• Aeolian (Natural Minor)
• Harmonic Me
• Dorian
• Phrygian
• Super-Locrian (Hloov Diminished)
• Phrygian Dominant nrog Chromatic Leading Tones
• Melodic Minor (Ascending Pattern)

Quantiser Interface
Hom Quantiser tso cai rau quantisation ntawm lub teeb liab tam sim no ntawm CV Input.

• Txhua qhov kev hloov pauv hauv Programming Hom yuav tsis raug cog lus kom txog thaum dàil nkag mus rau Quantser Hom.
• Hauv hom Quantiser, Slider teeb tsa lub ntiaj teb slewamount rau quantiser.
• Lub slider's LED yuav ci ntsa iab dawb thiab nce inbrightness li slew npaum li cas.

Octave-Offsetting Quantised Voltage

• Hauv hom Quantiser, Khawm 1 thiab Khawm 2 yog siv los ua kom thoob ntiaj teb offset quantised vol.tage tam sim no ntawm cov zis los ntawm octaves zoo meej.
• Khawm 1 yuav offset quantised voltage tsis zoo los ntawm 9V (9 octaves). Lub pob yuav teeb dawb thaum siv octave offset.
• Khawm 2 yuav offset quantised voltage zoo txog li 9V (9 octaves). Lub pob yuav teeb dawb thaum siv octave offset.
• Nias ob lub pob kom rov pib dua octave offset voltage ua 0v.

Precision Adder Interface
Precision Adder Interface tso cai rau chromatic offset ntawm lub teeb liab tam sim no ntawm cov zis.

• Txhua qhov kev hloov pauv hauv Programming Interface yuav tsis raug cog lus kom txog thaum dàil nkag mus rau Precision Adder Interface.
• Hauv Precision Adder Interface, Slider teeb tsa lub ntiaj teb slew tus nqi rau cov quantiser.
• Lub slider's LED yuav ci ntsa iab dawb thiab nce qhov ci ntsa iab raws li qhov ntau ntxiv.
• Lub slew yog siv rau Quantiser Interface teeb liab nkaus xwb. Precision Adder Interface offsets yuav raug siv tam sim ntawd

Chromatic-Offsetting Quantised Voltage

• Hauv Precision Adder Interface, Khawm 1 thiab Khawm 2 yog siv los ua kom thoob ntiaj teb offset voltage tam sim no ntawm cov zis los ntawm cov kev faib chromatic.
• Khawm 1 yuav muab qhov tsis zoo voltage offset txog -9V (9 octaves).
• Lub pob yuav teeb dawb thaum lub octave offset voltage siv.
• Khawm 2 yuav muab qhov zoo voltage offset mus txog +9V (9 octaves).
• Lub pob yuav teeb dawb thaum lub octave offset voltage siv.
• Nias ob lub nyees khawm kom rov pib dua qhov offset voltage ua 0v.

MIDI-rau-CV hom
MIDI-rau-CV hom hloov dàil mus rau hauv MIDI-rau-CV Interface.Nyob rau hauv MIDI-rau-CV hom, nias thiab tuav ob lub nyees khawm rau 2 vib nas this. Txhawm rau tawm MIDI-rau-CV hom, nias thiab tuav ob lub pob rau 2 vib nas this. MIDI Interfacing

• Raws li USB MIDI Host, dàil tuaj yeem txuas nrog MIDI maub los ntawm USB Hom A Chaw nres nkoj.
• Cov khoom siv raws li chav kawm yuav txuas ncaj qha mus rau dàilexpander rau USB MIDI tswj. (chav kawm ua raws li tus qauv, tab sis tsuas muaj ntau lub npe / cov khoom siv uas peb tuaj yeem sim hauv tsev!
• Qhov zoo tshaj tam sim no noj ntawm USB MIDI ntaus ntawv yog mus txog 500mA.
• Tam sim no kos rau ntawm +12V rail yuav nce thaum poweringa USB ntaus ntawv. Thov npaj raws li.
• dàil tuaj yeem txuas nrog MIDI maub los lossis MIDI interface viaits suav nrog TRS MIDI Hom A adapter. Los ntawm no adapter legacy5-pin DIN MIDI kev twb kev txuas yuav siv tau.
• Los ntawm lub neej ntawd, MIDI tuaj yeem siv los ua haujlwm dynamically program Quantserengine's scale. Nyob rau hauv MIDI-rau-CV hom dàil ua haujlwm raws li ib qho piv txwv monophonic MIDI interface ua 1V / octave (xws li suab khoov), rooj vag thiab cov cim qhia txog MIDInote cov tswv yim.

Firmware Update

• Fais fab tuag
• Unmount ob lub ntsiab module thiab MIDI expander los ntawm qhov system
• Xyuas kom meej tias MIDI expander yog tag nrho txuas nrog lub ntsiab module.
• Txuas USB Hom B Mini Chaw nres nkoj nyob tom qab ntawm MIDI Expanderto lub computer.
• Nias thiab tuav lub Firmware Hloov Kho Khawm thaum lub hwj chim dàil rau, kom ntseeg tau tias tsis muaj dab tsi tuaj yeem ua rau luv luv Circuit Court module thaum lub zog rau.
• dàil yuav tshwm sim raws li ib tug cia khoom nyob rau hauv lub computer.
• Luag lub firmware file mus rau hauv paus directory ntawm dàil.
• Thaum lub firmware hloov tshiab file yog theej, dàil yuav unmount los ntawm lub computer thiab reboot.
• Lub firmware tau hloov kho tam sim no.
• Fais fab dàil tawm thiab mount nws rov qab rau hauv lub system.

Phau Ntawv Sau: Collin Russell
Phau Ntawv Tsim: Dominic D'Sylva
Cov cuab yeej no ua tau raws li cov qauv hauv qab no: EN55032, EN55103-2, EN61000-3-2, EN61000-3-3, EN62311

Cov ntaub ntawv / Cov ntaub ntawv

INSTRUo Dail Eurorack Quantiser thiab MIDI Interface Module [ua pdf] Tus neeg siv phau ntawv Dail Eurorack Quantiser thiab MIDI Interface Module, Eurorack Quantiser thiab MIDI Interface Module, Quantiser thiab MIDI Interface Module, MIDI Interface Module, Interface Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv