IDEC MQTT Sparkplug B nrog Lgnition User Guide

Txhawm rau pab kom MQTT/SparkPlug functionality, nruab qhov tsim nyog modules ntawm Config -> SYSTEM -> Modules.
Xaiv thiab nruab qhov rub tawm module los koom ua ke MQTT kev txhawb nqa.

Hloov OPC-UA Server Configuration

Tom qab txhim kho MQTT modules, teeb tsa OPC-UA server los ntawm kev mus rau Config -> OPC UA -> Server Settings.
Kos lub 'Show advanced properties' checkbox thiab pab 'Expose Tag Cov kws kho mob 'kom ua tiav qhov teeb tsa.

Ignition Installation & Teeb tsa

Download tau thiab nruab Ignition

Rub tawm Ignition executable ntawm no.
https://inductiveautomation.com/downloads/ignition
Download tau file rau lub platform koj siv.
Saib ntawm no rau cov lus qhia installation.
https://docs.inductiveautomation.com/display/DOC81/Installing+and+Upgrading+Ignition
Rau cov uas tsis yog-Windows operating systems, muaj cov lus qhia txuas rau Linux thiab macos, feem.

Nruab Ignition

Download tau tus installer los ntawm peb nplooj ntawv Downloads.
Khiav lub installer thiab ua raws li cov kauj ruam hauv lub installation wizard.
- Nyem qhov no yog tias koj tab tom txhim kho Linux…
- Nyem qhov no yog tias koj tab tom txhim kho ntawm macOS…

Teeb Cov Lus Qhia rau kev siv

MQTT / Sparkplug B nrog Ignition

Nkag mus rau hauv Ignition

Tom qab installation, nkag mus rau qhov no URL hauv qhov browser kom nkag mus rau qhov chaw nres nkoj 8088 ntawm lub computer khiav Ignition.
http://localhost:8088/

Ua raws li cov kauj ruam thiab nyem "Finish Setup".
Tom ntej no, qhov no yuav coj mus rau qhov pib Ignition screen raws li qhia hauv qab no.
Thaum thawj qhov screen tshwm, nyem rau ntawm "Log In" khawm nyob rau sab xis sab xis kom nkag mus.

Tus username thiab password siv los nkag rau hauv yog tib yam li thaum lub sijhawm Ignition installation.

Siv MQTT/Sparkplug B nrog Ignition

Ignition tsis txhawb MQTT los yog SparkPlug nyob rau hauv nws thawj lub xeev (tam sim ntawd tom qab installation).

MQTT/SparkPlug tuaj yeem txhawb nqa los ntawm kev txhim kho MQTT module ntxiv. - Lub MQTT module tuaj yeem rub tawm ntawm no.
- https://inductiveautomation.com/downloads/third-party-modules/
- Muaj plaub MQTT modules muab los ntawm Ignition.
  - Cov Distributor Module thiab Cav Module yuav tsum tau nruab.
- (Yuav tsum tau) MQTT Distributor Module
  - Ntxiv MQTT broker functionality rau Ignition.
- (Yuav tsum tau) MQTT Cav Module
  - Ntxiv lub peev xwm los txuas MQTT broker (Distributor Module) thiab Ignition
- (Yeem) MQTT Transmission Module
  - Ntxiv MQTT node (Publisher/Subscriber) functionality.
  - Yog tias Ignition siv los ua SCADA, nws yuav ua haujlwm yam tsis muaj nws (yuav tsum tau yog nyob rau sab ntaus ntawv)
- (Yeem) MQTT Recorder Module
  - Nruab yog tias koj xav tsim keeb kwm ntawm cov ntaub ntawv sib txuas lus los ntawm MQTT Sparkplug.
Rau MQTT module, qhib Ignition's "Config" -> "SYSTEM" -> "Modules".

Nyem "Nruab lossis Txhim Kho Module ...". Nyem "Nruab lossis Txhim Kho Module ...".
Xaiv lub downloaded module thiab nias rau "Nruab" khawm kom pib installation.

Thaum lub installation tiav lawm, Module Configuration screen qhia cov teeb tsa modules.
Tom qab txhim kho MQTT-txog modules, OPC-UA server configuration yuav tsum tau hloov thiab rov pib dua. (vim MQTT raug kho raws li ib yam khoom ntawm OPC-UA)

Txhawm rau rov pib dua OPC-UA neeg rau zaub mov, xaiv "Config", "OPC UA", "Server Settings" thiab kos lub thawv "Show advanced properties" checkbox.
Tom ntej no, qhib lub "Expose Tag Cov neeg muab kev pabcuam” checkbox
Pib dua OPC-UA server tom qab hloov cov chaw. Txhawm rau pib dua, qhib "Config" -> "SYSTEM" -> "Modules

Nias lub pob "restart" rau sab xis ntawm "OPC-UA.
Thaum xub thawj, cov ntaub ntawv tuaj yeem raug xa los ntawm MQTT node (sab ntaus ntawv) mus rau Ignition, tab sis tsis nyob rau hauv kev taw qhia (Ignition rau MQTT node).
Qhov no tuaj yeem raug kaw los ntawm kev teeb tsa Ua qhov no, qhib "Config"-> "MQTT ENGINE"-> "Settings" thiab uncheck "Block Node Commands" (rau Nodes) thiab "Block Device Commands" (rau Devices) hauv "Command Settings.
MQTT Distributor module ua lub luag haujlwm ntawm MQTT broker, tab sis thaum nkag los ntawm MQTT node (device), authentication yog ua nrog tus neeg siv lub npe thiab tus password.
Cov neeg siv lub npe thiab tus password no tau teeb tsa los ntawm "Config" -> "MQTT DISTRIBUTOR" -> "Settings" -> "Cov neeg siv".
Txhawm rau tsim tus neeg siv tshiab, nyem "Tsim MQTT Cov Neeg Siv Tshiab ..." ntawm qhov screen no. Nyem "Tsim MQTT Cov Neeg Siv Tshiab ..." ntawm qhov screen no los tsim ib tus neeg siv tshiab.
Thaum koj tsim ib tus neeg siv tshiab, koj teev tus username thiab password, tab sis koj kuj tau teeb tsa cov cai (ACLs) rau tus neeg siv no.
Txhawm rau tso cai nyeem / sau nkag mus rau txhua lub ntsiab lus rau tus neeg siv tus lej koj tab tom teeb tsa, teeb "RW #".

Yuav ua li cas txheeb xyuas MQTT kev sib txuas lus

Tom qab kev teeb tsa ntawm MQTT-txog modules thiab kev teeb tsa ntawm OPC-UA tiav, koj tuaj yeem tshawb xyuas MQTT-kawm tsis raws li cov khoom ntawm OPCUA.
Qhib "Config" -> "OPC Client" -> "OPC Quick Client",
Nthuav tsob ntoo hauv qhov kev txiav txim ntawm "Ignition OPC UA Server" > "Tag Cov chaw muab kev pab”> “MQTT Cav”.
Cov nodes txuas nrog Sparkplug tau tso tawm hauv qab "MQTT Cav"

Cov lus nug nquag

Q: Kuv tuaj yeem nkag mus rau Ignition interface li cas tom qab kev teeb tsa?
A: Tsuas yog sau http://localhost:8088/ hauv a web browser nkag mus thiab nkag mus rau Ignition.

Q: Dab tsi yog qhov yuav tsum tau MQTT modules rau Ignition?
A: Cov modules yuav tsum muaj xws li MQTT Distributor thiab MQTT Cav, nrog rau kev xaiv modules xws li MQTT Transmission thiab MQTT Recorder.

Cov ntaub ntawv / Cov ntaub ntawv

IDEC MQTT Sparkplug B nrog Lgnition [ua pdf] Cov neeg siv phau ntawv qhia
MQTT Sparkplug B nrog Lgnition, MQTT, Sparkplug B nrog Lgnition, nrog Lgnition, Lgnition

Cov ntaub ntawv

Cov neeg siv phau ntawv

IDEC MQTT Sparkplug B nrog Lgnition

Cov ntaub ntawv khoom

Cov lus qhia siv khoom