iBoot Huab Service: Tswj tag nrho koj iBoots los ntawm ib leeg
kos npe rau, tshem tawm qhov chaw nres nkoj xa mus thiab teeb meem kev nyab xeeb
Telnet: Teeb tsa thiab tswj tag nrho cov haujlwm, ua kom yooj yim
sau ntawv

Network Hloov: Ua-hauv 2 Chaw nres nkoj 10/100 Network Hloov
(iBoot-G2S nkaus xwb), tshem tawm qhov xav tau rau qhov chaw nres nkoj router ntxiv thiab
yooj yim installation
Kev nthuav dav: Ntxiv cov nqi qis iBoot-EXP rau txog li peb qhov hluav taws xob
tswj

I/O Tswj: Tswj lossis saib xyuas koj tus kheej cov tswv yim digital thiab
outputs, siv inputs los tswj lub zos AC qhov hluav taws xob
AutoPing: Tsis siv neeg saib xyuas thiab ua rau ua tsis tiav
khoom siv
Kev Ua Zoo Zoo: Sim kaw qhov muag muag lossis rov pib dua ua ntej
tswj hwj chim

Disable Off: Tiv thaiv kev tsis sib haum xeeb ntawm lub qhov hluav taws xob
Lub Sijhawm Teem Sijhawm: Lub zog ua haujlwm ntawm lub sijhawm tsis tu ncua (14
xwm txheej)
Management Utility: Kev teeb tsa yooj yim, hloov kho firmware, thiab rov pib dua
Hoobkas default
Ib qho yooj yim Software Integration: Siv DxP raws tu qauv los tsim koj
tus kheej kev cai thov

Tswj Software: Tsim batch files lossis shortcuts los tswj
zog
URL Tswj: Tsim koj tus kheej website txuas los tswj fais fab

API Control: Tswj thiab teeb tsa siv huab sau npe
(API raws tu qauv tau piav qhia hauv ib daim ntawv cais)

Khoom siv

1. Kev teeb tsa kho vajtse

Txhawm rau nruab iBoot-G2+ lossis iBoot-G2S, ua raws li cov kauj ruam no:

Xyuas kom lub hwj chim hloov yog unplugged ntawm phab ntsa qhov hluav taws xob.

Xaiv qhov chaw tsim nyog rau lub hwj chim hloov nyob ze koj
khoom siv network.
Txuas lub zog hloov mus rau lub network siv Ethernet
kab.

Txuas ib qho khoom siv ntxiv, xws li iBoot-EXP units, yog tias
xav tau.
Txuas lub hwj chim hloov mus rau hauv lub qhov hluav taws xob phab ntsa.

2. Kev teeb tsa thawj zaug

Txhawm rau teeb tsa iBoot-G2+ lossis iBoot-G2S thawj zaug,
ua raws li cov kauj ruam no:

Xyuas kom lub hwj chim hloov yog powered on thiab txuas nrog lub
network.
Qhib a web browser thiab nkag mus rau IP chaw nyob ntawm lub hwj chim
hloov.

Ua raws li cov lus qhia ntawm lub vijtsam los teeb tsa lub network,
cov neeg siv nyiaj, thiab lwm yam kev teeb tsa.

3. Web Kev ua haujlwm browser

Txhawm rau tswj lub hwj chim hloov siv a web browser, ua raws li cov no
cov kauj ruam:

Qhib a web browser thiab nkag mus rau IP chaw nyob ntawm lub hwj chim
hloov.
Nkag mus siv koj tus neeg siv cov ntaub ntawv pov thawj.
Siv qhov browser interface los ua cov haujlwm xws li rebooting
Cov khoom siv hluav taws xob, kev teeb tsa, thiab teem caij lub zog ua haujlwm.

4. iBoot Cloud Service

Lub iBoot Cloud Service tso cai rau koj los tswj tag nrho koj cov iBoots
los ntawm ib tug kos npe rau. Txhawm rau siv qhov kev pabcuam no:

Tsim ib tus account ntawm iBoot Cloud Service webqhov chaw.
Sau npe koj iBoots rau koj tus account siv qhov muab
cov lus qhia.

Nkag mus rau iBoot Cloud Service website tswj thiab tswj
koj iBoots remotely.

FAQ

Q: Kuv puas tuaj yeem siv iBoot-G2S sab nraum zoov lossis ze dej?

A: Tsis yog, iBoot-G2S yuav tsum tsis txhob siv rau sab nraum zoov
ib puag ncig los yog ze qhov chaw dej xws li da dej, dab dej, lossis
pas dej da.

Q: Muaj pes tsawg lub sijhawm kuv tuaj yeem teem caij nrog lub hwj chim hloov?

A: Koj tuaj yeem teem sijhawm txog 14 lub sijhawm nrog lub zog hloov.

Q: Kuv yuav ua li cas hloov kho firmware?

A: Ua raws li cov lus qhia hauv Kev Tswj Xyuas Kev Tswj Xyuas
ntu ntawm cov neeg siv phau ntawv los ua ib qho kev hloov kho firmware.

Q: Kuv puas tuaj yeem tswj lub hwj chim hloov siv kuv tus kheej kev cai
daim ntawv thov?

A: Yog lawm, koj tuaj yeem siv DxP raws tu qauv los tsim koj tus kheej kev cai
daim ntawv thov rau kev tswj lub hwj chim hloov.

Q: Puas muaj kev txhawb nqa rau cov khoom?

A: Yog, kev txhawb nqa thiab cov ntaub ntawv pov thawj tuaj yeem pom
nyob rau hauv seem Kev Pab Txhawb thiab Warranty ntawm tus neeg siv
phau ntawv.

View Fullscreen

Web Enabled Power Switch
Qauv: iBoot-G2S iBoot-G2+ Lub Peb Hlis 2021

Zoo siab nrog rau kev yuav qhov zoo tshaj plaws network tswj fais fab hloov muaj. Phau ntawv no suav nrog ob tus qauv, iBoot-G2+ thiab iBoot-G2S. Phau ntawv no hais txog iBoot-G2+ thiab sau cov kev hloov pauv rau iBoot-G2S.
Web Teeb thiab Tswj: Yooj yim browser interface rau ib nias reboot thiab tag nrho cov configuration.
iBoot Huab Service: Tswj tag nrho koj iBoots los ntawm ib qho kev kos npe rau. Tshem tawm qhov chaw nres nkoj xa mus thiab teeb meem kev nyab xeeb.
Telnet: teeb tsa thiab tswj tag nrho cov fuctions. Tso cai rau kev sau ntawv yooj yim.
Network Hloov: Ua-hauv 2 Chaw nres nkoj 10/100 Network Hloov (iBoot-G2S nkaus xwb). Tshem tawm qhov xav tau rau qhov chaw nres nkoj router ntxiv thiab ua kom yooj yim rau kev teeb tsa.
Expansion: Ntxiv tus nqi qis iBoot-EXP chav nyob rau txog li peb qhov hluav taws xob tswj.
I/O Tswj: Tswj lossis saib xyuas koj tus kheej cov khoom siv thiab cov khoom tawm. Siv cov khoom siv los tswj lub qhov hluav taws xob hauv zos AC.
AutoPing: Tsis siv neeg saib xyuas thiab ua haujlwm rau cov cuab yeej ua tsis tiav.
Graceful Shutdown: sim kaw qhov muag muag lossis reboot ua ntej tswj fais fab.
Disable Off: Txhawm rau tiv thaiv qhov xwm txheej tawm ntawm lub qhov hluav taws xob.
Lub Sijhawm Teem Sijhawm: Lub zog ua haujlwm ntawm lub sijhawm tsis tu ncua. (14 txheej xwm)
Kev Tswj Xyuas Kev Pabcuam: Kev teeb tsa yooj yim, hloov kho firmware thiab rov pib dua rau lub Hoobkas Default
Ib qho yooj yim Software Integration: Siv DxP raws tu qauv los tsim koj tus kheej daim ntawv thov kev cai.
Tswj Software: Tsim batch files lossis Shortcuts los tswj lub zog.
URL tswj: Tsim koj tus kheej website txuas los tswj fais fab.
API tswj: Tswj thiab teeb tsa Kev siv huab sau npe * API raws tu qauv tau piav qhia hauv ib daim ntawv cais

iBoot-G2+ iBoot-G2S

1. Cov Ntsiab Lus

1. Table of Contents………………………………………1 2. Cov Lus Qhia Txog Kev Nyab Xeeb Tseem Ceeb ………………… 2 3. Cov Lus Qhia General………………………….. 3 4. Kho vajtse Installation ………………………… 5 5. Initial Configuration ……………………………………… 9 6. Web Browser ua haujlwm…………………………11 7. Web Kev teeb tsa …………………………………………… 15

8. iBoot Cloud Service ……………………………… 27 9. Command Line Interface…………………………..29 10. DxP Protocol ……………………………………….. 38 11. Firmware Upgrades………………………….38 12. Kev daws teeb meem ………………………………………39 13. Specifications………………………………………. 40 14. Technical Support thiab Warranty ……….41

2. Cov lus qhia txog kev nyab xeeb tseem ceeb

Thaum siv cov khoom no, kev ceev faj txog kev nyab xeeb yuav tsum ib txwm ua kom txo qis kev pheej hmoo ntawm hluav taws kub, hluav taws xob poob siab, thiab raug mob rau tib neeg, suav nrog cov hauv qab no:

Nyeem thiab nkag siab tag nrho cov lus qhia.

Ua raws li tag nrho cov lus ceeb toom thiab cim rau ntawm cov khoom.

Tshem cov khoom no los ntawm lub qhov hluav taws xob phab ntsa ua ntej ntxuav. Tsis txhob siv cov tshuaj ntxuav kua los yog tshuaj aerosol. Siv adamp daim ntaub

kev tu.

Tsis txhob siv cov khoom no nyob rau hauv ib qho chaw sab nraum zoov lossis ze dej, piv txwv liample, ze ntawm lub dab da dej, lub tais ntxuav tais diav, chav ua noj dab dej, los yog

ntxhua khaub ncaws, hauv qab daus ntub dej, lossis ze ntawm lub pas dej da dej.

Tsis txhob muab cov khoom no tso rau ntawm lub laub tsis ruaj khov, sawv ntsug, lossis rooj. Cov khoom yuav poob, ua rau muaj kev puas tsuaj loj rau lub

khoom.

Cov qhov qhib thiab qhov qhib hauv cov khoom no thiab sab nraub qaum lossis hauv qab yog muab tso rau qhov cua kom tiv thaiv nws los ntawm overheating; cov no

qhov qhib yuav tsum tsis txhob thaiv lossis npog. Qhov qhib yuav tsum tsis txhob thaiv los ntawm kev tso cov khoom ntawm lub txaj, rooj zaum,

ntaub pua plag, lossis lwm yam zoo sib xws. Cov khoom no yuav tsum tsis txhob muab tso rau ze lossis dhau lub tshuab hluav taws xob lossis cov ntawv tso cua sov. Cov khoom no

yuav tsum tsis txhob muab tso rau hauv ib lub built-in installation tshwj tsis yog tias muaj qhov cua kom zoo.

Cov khoom no yuav tsum tau ua haujlwm tsuas yog los ntawm hom hluav taws xob uas tau teev nyob rau ntawm daim ntawv cim. Yog koj tsis paub meej

hom fais fab mov rau koj lub tsev, sab laj nrog koj tus neeg muag khoom lossis lub tuam txhab fais fab hauv zos.

Cov khoom no yog txawm peem rau nrog ib tug peb hlau grounding plug, ib tug plug muaj ib tug thib peb (grounding) tus pin. Lub plug no tsuas haum

nyob rau hauv ib tug grounding hom fais fab qhov hluav taws xob. Qhov no yog ib qho kev nyab xeeb. Yog tias koj tsis tuaj yeem ntxig lub ntsaws rau hauv lub qhov hluav taws xob, tiv tauj koj

hluav taws xob los hloov koj lub qhov hluav taws xob uas siv tsis tau. Tsis txhob kov yeej lub hom phiaj kev nyab xeeb ntawm lub hom phiaj grounding plug. Tsis txhob siv 3-rau-

2 prong adapter ntawm lub txais; siv hom adapter no yuav ua rau muaj kev pheej hmoo ntawm hluav taws xob poob siab thiab / lossis kev puas tsuaj rau qhov no

khoom.

Tsis txhob cia ib yam dab tsi los so ntawm lub hwj chim qaum. Tsis txhob nrhiav cov khoom no qhov twg cov hlua yuav raug tsim txom los ntawm tib neeg

taug kev ntawm nws.

10.

Tsis txhob overload phab ntsa qhov hluav taws xob thiab cov hlua txuas ntxiv vim qhov no tuaj yeem ua rau muaj kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob poob.

11.

Tsis txhob thawb cov khoom ntawm txhua yam rau hauv cov khoom no los ntawm cov slots vim tias lawv tuaj yeem kov cov voltage cov ntsiab lus los yog luv luv

qhov chaw uas yuav ua rau muaj kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob poob siab. Tsis txhob nchuav kua ntawm txhua yam ntawm cov khoom.

12.

Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws xob poob siab, tsis txhob disassemble cov khoom no, tab sis coj mus rau ib tus neeg ua haujlwm tsim nyog thaum qee qhov

yuav tsum muaj kev pab lossis kho ua haujlwm. Kev qhib lossis tshem cov npog yuav ua rau koj muaj kev phom sij voltages lossis lwm yam kev pheej hmoo.

Kev sib sau ua ke tsis raug tuaj yeem ua rau hluav taws xob poob thaum cov khoom siv tom qab siv.

13.

Tshem tawm cov khoom no los ntawm lub qhov hluav taws xob phab ntsa thiab xa mus rau kev pabcuam rau cov neeg ua haujlwm tsim nyog raws li cov hauv qab no:

Thaum lub hwj huam mov qaum los yog ntsaws yog puas los yog frayed.

Yog tias cov kua tau nchuav rau hauv cov khoom.

Yog tias cov khoom tau raug los nag lossis dej.

Yog tias cov khoom tsis ua haujlwm ib txwm ua raws li cov lus qhia ua haujlwm. Kho tsuas yog cov tswj uas

raug them los ntawm kev khiav hauj lwm cov lus qhia vim hais tias kev hloov tsis raug ntawm lwm yam kev tswj yuav ua rau muaj kev puas tsuaj

thiab feem ntau yuav xav tau kev ua haujlwm ntau los ntawm tus kws tshaj lij uas tsim nyog los kho cov khoom kom ua haujlwm zoo.

Yog tias cov khoom tau poob los yog puas lawm.

Yog tias cov khoom muaj qhov txawv txav ntawm kev ua haujlwm.

14.

Tsis txhob siv xov tooj (tshwj tsis yog hom cordless) thaum muaj cua daj cua dub. Tej zaum yuav muaj kev pheej hmoo ntawm hluav taws xob

ceeb los ntawm xob laim.

15.

Tsis txhob siv lub xov tooj los tshaj tawm cov pa xau hauv ib puag ncig ntawm qhov xau.

16.

Tsis txhob tshaj qhov tso zis ntau tshaj plaws ntawm cov khoom siv fais fab.

Txuag cov lus qhia no

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 2

3. Cov lus piav qhia dav dav
Lub iBoot-G2+ yog lub network txuas, IP chaw nyob, web tswj AC fais fab hloov. Leej twg nrog a web browser tuaj yeem nkag mus rau iBoot-G2+ los ua lub zog On, Off lossis Fais Fab Cycle (Reboot lossis Power Burst). iBoot-G2+ nkag mus yog lo lus zais tiv thaiv nrog cov neeg siv thiab cov thawj coj kev nyab xeeb qib.
iBoot-G2+ nta thoob ntiaj teb tus qauv IEC320 kev sib txuas thiab tau sib xws nrog lub zog hluav taws xob thoob ntiaj teb. Ib qho yooj yim Web browser interface ua rau nws yooj yim los tswj lub zog los ntawm txhua qhov chaw hauv ntiaj teb nrog nias ntawm tus nas. iBoot-G2+ kuj txhawb Telnet rau cov lus txib nrog rau Dataprobe's Exchange Protocol (DxP) rau kev cuam tshuam rau ntau yam khoom siv Dataprobe thiab kev tsim kho software.

3.1. Siv rau iBoot
· Cov chaw taws teeb reboot ntawm ib lub cuab yeej, routers, servers, kiosks, thiab lwm yam. Lub cuab yeej yuav tsum tau rebooted tsis tas yuav txuas nrog lub network.
· Tiv thaiv cov cuab yeej rhiab los ntawm kev ua kom lawv lub hwj chim tawm thaum tsis siv. Qhov no tiv thaiv hackers tsis pom lawv txhua lub sijhawm.
· Cov khoom siv hluav taws xob qis thaum tsis xav tau kev txuag hluav taws xob thiab txuag kev hnav thiab tsim kua muag. · Txhawb cov khoom siv ceeb toom xws li sirens, lamps, lus; los yog tswj ib puag ncig zoo xws li cua sov, cua txias
twj, etc.
3.2. Ntau yam kev xaiv tswj
Ntxiv rau qhov Web tswj kev muaj peev xwm, iBoot-G2+ nta ob peb lwm yam txhais tau tias ua haujlwm tau los yog nyob rau hauv lub computer tswj.
URL Tswj: Koj tuaj yeem xa ib qho URL mus rau iBoot-G2+ uas muaj tag nrho cov ntaub ntawv tsim nyog los nug lossis hloov lub zog. Qhov no ua rau nws yooj yim los tsim ib lub pob ntawm koj lub desktop lossis kos rau hauv ib pawg file los yog tsab ntawv.
AutoPing thiab Heartbeat: Lub AutoPing feature tso cai rau iBoot-G2+ kom pom cov cuab yeej ua tsis tiav thiab ua lub sijhawm reboot lossis lwm yam kev tswj fais fab (xws li tig rau qhov taw qhia lossis lub siren). Koj teeb tsa mus txog plaub qhov chaw nyob IP yuav tsum tau pinged ib ntus. Thaum iBoot-G2+ tsis pom cov lus teb los ntawm qhov chaw nyob (es), qhov programmed fais fab tswj muaj nuj nqi yog actuated.
Lub plawv dhia ua haujlwm ua haujlwm rov qab; nws saib rau cov lus los ntawm ib lub cuab yeej thiab ua haujlwm thaum cov lus ntawd tsis tau txais lawm. Lub plawv dhia tshuab hluav taws xob app nruab rau hauv koj lub server thiab tso cai rau iBoot-G2+ kom pib rov pib dua thaum lub server poob.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 3

Telnet: iBoot's Command Line Interface (CLI) tso cai ncaj qha tswj thiab teeb tsa los ntawm Telnet.
USB: iBoot's Command Line Interface (CLI) tso cai ncaj qha tswj thiab teeb tsa los ntawm USB chaw nres nkoj.
Dataprobe Exchange Protocol: iBoot-G2+ txhawb nqa Dataprobe Exchange Protocol (DxP) Cov txheej txheem no tso cai rau cov khoom siv Dataprobe sib txuas lus thoob plaws hauv tes hauj lwm, thiab tso cai rau cov neeg tsim khoom tsim cov ntawv thov kev cai los koom ua ke iBoot-G2+ rau hauv cov ntawv thov kev cai. Yog xav paub ntxiv txog DxP, hu rau Dataprobe Applications Engineering thiab Support.
API: thaum iBoot-G2+ txuas nrog huab account, muaj API xa cov ntaub ntawv tswj thiab teeb tsa ntawm huab thiab lub cuab yeej. API raws tu qauv tau piav qhia hauv ib daim ntawv cais.

3.3. Expansion rau Peb Qhov Chaw
iBoot-G2+ tuaj yeem txuas rau ob chav txuas ntxiv, iBoot-Exp los tswj peb qhov hluav taws xob. Tag nrho peb qhov hluav taws xob yog tswj thiab tswj los ntawm iBoot-G2+ web page thiab CLI. Txhua qhov hluav taws xob yog tswj hwm tus kheej. AutoPing thiab Heartbeat tuaj yeem siv los tswj lub ntsiab thiab nthuav dav ntawm nws tus kheej thiab.

3.4. Kev nthuav dav rau GPIO

Nthuav mus rau 3 qhov hluav taws xob nrog iBoot-Exp

Thaum tsis siv rau kev nthuav dav rau iBoot-Exp, Expansion Ports ntawm iBoot-G2+ tuaj yeem siv los ua lub hom phiaj dav dav I/O (GPIO) los saib xyuas thiab tswj cov khoom siv ntxiv. Cov tswv yim ntawm cov chaw nres nkoj nthuav dav tuaj yeem siv los saib xyuas lub tswb hu, ib puag ncig sensors, relays thiab hloov kaw. Cov zis tawm tuaj yeem tsav cov relays rau cov txheej txheem tswj, kev ruaj ntseg thiab kev tswj ib puag ncig.

Cov inputs kuj tuaj yeem siv los tswj lub zog ntawm lub zog loj. Ntau hom kev ua haujlwm tso cai rau cov khoom siv txuas nrog lub cev hloov pauv lossis lwm yam kev tswj hwm uas tsim kom muaj kev sib cuag kaw los tswj lub zog. Cov tswv yim 1 thiab 2 tuaj yeem teeb tsa rau ntau yam kev xaiv tswj fais fab, suav nrog kev xauv lub qhov hluav taws xob rau On lossis Off kom lov tes taw lwm txoj hauv kev tswj hwm thiab ruaj ntseg lub cuab yeej.

iBoot-G2+ siv Dataprobe Exchange Protocol (DxP) los sib txuas lus nrog lwm cov Dataprobe pab kiag li lawm kom tso cai thauj cov ntaub ntawv GPIO hla lub network. DxP raws tu qauv muaj los ntawm Dataprobe's website, tso cai rau koj los tsim cov kev pab cuam los saib xyuas thiab tswj ib qho Dataprobe DxP enabled ntaus ntawv, lossis pauv cov xwm txheej thiab tswj ntawm cov khoom siv thoob plaws lub network.

2 Inputs thiab 2 Outputs li GPIO

Thauj Cov Txheej Txheem Digital hla lub Network

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 4

4. Kev teeb tsa kho vajtse
4.1. Kev sib txuas Ethernet
iBoot-G2+ txhawb nqa ib qho 10/100 Ethernet kev sib txuas siv cov khoom siv cable, lossis lwm yam tsim nyog tsis muaj kev sib tw twisted khub (Cat 5) cabling. Kev ua (ntsuab) thiab 100Mb (amber) LEDs ntawm lub network connector qhia thaum lub network kev twb kev txuas raug tsim kom raug thiab thaum qhov kev sib txuas yog 100 Mbit / s.
iBoot-G2S txhawb nqa ob qhov kev sib txuas 10/100 Ethernet. Qhov tsim hauv ob qhov chaw nres nkoj tsis tswj tau tso cai rau uplink thiab downlink kev sib txuas los ntawm iBoot-G2S kom muab tso rau hauv ib lub cable uas twb muaj lawm tsis tas yuav muaj qhov hloov pauv.
Ob qhov chaw nres nkoj tuaj yeem txuas rau uplink (network) lossis downlink (device). Siv lub cable muab los yog lwm yam tsim nyog unshielded twisted khub (Cat 5) cabling. Kev ua (ntsuab) thiab 100Mb (amber) LEDs ntawm lub network connector qhia thaum lub network kev twb kev txuas raug tsim kom raug thiab thaum qhov kev sib txuas yog 100 Mbit / s.
4.2. AC fais fab kev sib txuas
Txuas lub cuab yeej kom muaj zog ON thiab OFF rau IEC receptacle cim A / C tso zis. Ib qho IEC 320 rau North American (NEMA 5-15) fais fab qaum yog suav nrog rau kev txuas lub iBoot-G2+ qhov hluav taws xob rau lub cuab yeej kom tswj tau.
Yog tias xav tau ib txoj hlua nrog lwm qhov kev txiav tawm, nco ntsoov tias nws raug ntsuas kom raug thiab ua tau raws li tag nrho cov qauv hluav taws xob hauv zos uas yuav tsum tau ua. Yog tias lub cuab yeej yuav tsum tau siv hluav taws xob siv IEC320 receptacle thiab detachable power cord, IEC rau IEC extension qaum yuav siv tau.
Lub iBoot-G2+ tuaj yeem txuas nrog lub zog sawb kom tso cai rau kev tswj hwm ib txhij ntawm ntau yam khoom siv. Nco ntsoov tias qhov sib xyaw ua ke ntawm tag nrho cov khoom siv tswj tsis pub dhau 12 Amps rau 105-125VAC los yog 10 Amps rau 210-240VAC.
Qhov taw qhia LED nyob ib sab ntawm lub qhov hluav taws xob Switched yuav nyob rau kom qhia tias lub hwj chim yog On ntawm lub qhov hluav taws xob. Qhov LED no yuav tua kom pom tias lub hwj chim tawm mus rau qhov hluav taws xob.
Txuas cov khoom siv fais fab txuas mus rau lub connector sau AC Input, thiab lwm qhov kawg rau koj qhov AC. Yog tias xav tau ib lub hwj chim txuas nrog lwm qhov txuas txuas, nco ntsoov tias nws raug ntsuas kom raug thiab ua tau raws li tag nrho cov qauv hluav taws xob hauv zos uas yuav tsum tau ua.

iBoot-G2+
iBoot-G2S
Txuas 10/100 Ethernet
IEC rau NEMA 5-15 Qhov hluav taws xob Cord rau North America
suav nrog
Tau qhov twg los Ntxiv qhov hluav taws xob Cables Hauv zos

v210312 wb

Fais fab Cord rau North America suav nrog

iBoot-G2+ / iBoot-G2S

Tau qhov twg los Ntxiv Hwj Chim Hauv Zos

Page 5

4.3. Kev sib txuas
iBoot-G2+ muaj ob qhov chaw nres nkoj nthuav dav, Exp1 thiab Exp2 rau kev sib txuas rau iBoot-Exp, lossis siv raws li Lub Hom Phiaj Lub Hom Phiaj thiab Tshaj Tawm (GPIO). Hom teeb tsa ntawm iBoot-G2+ txiav txim siab seb qhov chaw nres nkoj nthuav dav ua haujlwm li cas.
Kev sib txuas rau iBoot-Exp yog tsim los siv cov ntsia hlau davhlau ya nyob twg thaiv. Cov ntsia hlau davhlau ya nyob twg blocks yog nyob rau hauv tshem tau connectors rau yooj yim cable fabrication.
Xyuas kom tseeb tias cov ntsia hlau terminals raug kaw kom ruaj ntseg thiab tsis muaj cov kab xoob xoob xoob xoob, lossis cov xaim ntau dhau.

Zoo Ntsia Hlau Terminal Connections

Tsis zoo Screw Terminal Connections.
Nco ntsoov Loose Wires thiab Tshaj Tawm Tshaj Tawm

Txuas rau iBoot-Exp
Terminal blocks txuas nrog tus pin-rau-tus pin nrog iBoot-Exp raws li qhia:

Txuas: Muaj nuj nqi Fais fab tswv yim av hais kom ua

iBoot-G2+ V+ Fais fab Out I Input G Ground O Output

iBoot-Exp V + Fais fab hauv O Output G Ground I Input

Expansion units (iBoot-Exp) raug xa nrog ib lub cable kom yooj yim txuas rau iBoot-G2+ . Qhov siab tshaj plaws cable ntev yog 1000 ft (305 m) siv 22 AWG hlau.

v210312 wb

iBoot-G2+ rau iBoot-EXP Kev Sib Txuas iBoot-G2+ / iBoot-G2S

Page 6

Kev sib txuas rau lub cev hloov pauv rau kev tswj fais fab
Kev sib txuas rau I / O connector rau kev tswj fais fab siv tus pins 2 thiab 3 raws li qhia hauv daim duab txuas. Kev ua haujlwm ntawm qhov hloov pauv yog txiav txim siab los ntawm kev teeb tsa. saib Expansion Settings seem 7.2

Cov kev sib txuas nkag mus rau cov hloov pauv rau kev tswj fais fab

Kev sib txuas rau General Purpose I/O

Muaj nuj nqi zog

iBoot-G2+ V+ Fais fab tawm

Cov lus teb kuv nkag

Ground Ground Command O Output

Kev piav qhia
Qhov no yog +12 VDC lub zog tawm ntawm iBoot-G2 + Qhov siab tshaj plaws tam sim no 100 mA
Input rau cov xwm txheej teeb liab. Qhuav Tiv tauj tswv yim los yog Qhib Sau.
Teeb liab av rau cov tswv yim thiab tso zis
2N3904 NPN Transistor 100. XNUMX mA siab tshaj

4.4. Kev sib txuas USB
Lub iBoot-G2+ muaj ib tug USB kev twb kev txuas uas yuav siv tau rau:
Kev sib txuas rau lub PC rau kev teeb tsa thiab tswj Kev Txuas rau PC rau kev saib xyuas lub plawv dhia

Schematic ntawm Input thiab Output Connections siv raws li General Purpose I/O

Txhawm rau siv USB chaw nres nkoj, txuas mus rau Windows PC, thiab kev teeb tsa yuav tsum tsis siv neeg. Yog tias koj xav tau nruab tus tsav tsheb ua ntej koj tuaj yeem rub tawm tus tsav tsheb ntawm http://dataprobe.com/support-iboot-g2-plus

Installation USB Driver
Khiav ibootG2Driver.exe ua ntej txuas lub iBoot-G2+ rau USB chaw nres nkoj ntawm lub PC. Txuas USB iBoot-G2+ mus rau USB chaw nres nkoj ntawm lub PC. Lub PC yuav nrhiav tau iBoot-G2+ thiab muab COM chaw nres nkoj. Txhawm rau nrhiav COM chaw nres nkoj mus rau Tswj Vaj Huam Sib Luag> Qhov System> Tus Thawj Tswj Ntaus Ntawv> Chaw nres nkoj (COM & LPT) Lub chaw nres nkoj com muab yuav yog USB
Serial Chaw nres nkoj (COMn)
Tam sim no USB chaw nres nkoj tuaj yeem siv nrog tus qauv Terminal Client (zoo li HyperTerminal) los sib txuas lus ncaj qha nrog iBoot-G2+. Dataprobe tseem muab qhov kev pab cuam yooj yim davhlau ya nyob twg (EZ Term) ntawm http://dataprobe.com/support-iboot-g2-plus

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 7

4.5. Kev xaiv Mounting

iBoot-G2+ yog haum rau desktop lossis txee mounting. Cov khoom siv mounting rau phab ntsa thiab DIN rail mounting yog muaj. Order part:

1920033

Mounting Kit rau iBoot-G2 + G2 Series

Tshem tawm tag nrho cov cables los ntawm lub tsev ua ntej kev txhim kho lossis tshem tawm cov khoom siv mounting.

1920033 Mounting Kit iBoot G2 Series

Txhim kho Cov Khoom Siv Phab Ntsa Mounting
1. Tshem tawm plaub lub ntswj ntsia hlau los ntawm lub hauv qab ntawm chav tsev.
Tsis txhob disassemble lub unit.
2. Txhim kho lub pob ntseg pob ntseg rau lub tsev siv cov ntsia hlau tshem tawm hauv Kauj Ruam 1

DIN Rail Mounting
1. Nruab Cov Khoom Siv Phab Ntsa Mounting raws li qhia. (siv cov kauj ruam 1-3 rau sab laug)
2. Txhim kho DIN rail clips siv plaub tus ntsia hlau muab.

3. Lub tsev yog npaj txhij rau phab ntsa mounting.

3. Npaj rau DIN rail mounting.

4. Siv M3 los yog #4 screws rau txuas rau qhov chaw haum

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 8

5. Kev teeb tsa thawj zaug
5.1. Auto Configuration
Yog tias koj lub network txhawb nqa Dynamic Host Configuration Protocol (DHCP), iBoot-G2+ yuav tau txais qhov chaw nyob IP thiab npaj siv. Koj tuaj yeem tshawb pom IP Chaw Nyob los ntawm koj lub server / Router, lossis siv Dataprobe's Device Management Utility (DMU).

5.2. Device Management Utility
Lub Device Management Utility (DMU), qhov kev pab cuam muaj nyob online ntawm http://dataprobe.com/support-iboot-g2-plus, muab txoj kev yooj yim tshaj plaws los nrhiav thiab teeb tsa koj iBoot-G2+ rau kev siv. Nws tuaj yeem tshawb pom tag nrho cov iBoots ntawm koj lub network, tso saib qhov chaw nyob IP tam sim no ntawm txhua tus, thiab tso cai rau qhov chaw nyob IP uas siv tau.

Nruab thiab khiav DMU

Download setup_dmu.exe

Khiav setup_dmu.exe

Khiav DMU

Nco tseg: DMU tsuas tuaj yeem teeb tsa tus IP chaw nyob hauv thawj ob feeb ntawm lub zog lossis rov pib dua iBoot. Lub DMU tsuas yog ua haujlwm nrog iBoots ntawm tib lub cev subnet li PC.

DMU Program Icon tom qab nruab

Thaum khiav, nyem rau ntawm Ntaus | Tshawb nrhiav kom pom tag nrho cov iBoots ntawm koj lub network. Lub DMU yuav tso saib Lub Npe Chaw, ID khoom nrog Version, qhov chaw nyob IP tam sim no, thiab MAC Chaw Nyob. Factory defaulted iBoots yuav tso tawm nrog lub npe iBoot-G2P-xxxx (xxxx yog 4 ntu kawg ntawm MAC chaw nyob). Factory default yog DHCP, yog li lub tsev yuav muaj DHCP chaw nyob. Yog tias muab los ntawm DHCP ces tsis muaj kev hloov pauv rau IP Chaw nyob yuav tsum tau. Yog tias tsis muaj DHCP server, qhov chaw nyob yuav yog 192.168.1.254

IP chaw nyob teb kuj qhia qhov chaw nres nkoj rau web nkag mus uas yog siv los ntawm iBoot. Qhov chaw nres nkoj txheem rau web browser tswj yog Hoobkas default Port 80.

DMU Discovers Dataprobe Devices on Local Network

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 9

Hloov tus IP chaw nyob
1. Nyem rau ntawm kab uas muaj cov iBoot-G2+ los teeb. Cov kab yuav ua kom pom tseeb.
2. Los ntawm cov ntawv qhia zaub mov xaiv Teem | Network Settings 3. Nkag mus rau IP hom Static thiab xaiv qhov xav tau
network teeb tsa, lossis Nkag mus rau IP hom DHCP thiab tso cai rau Network los muab cov ntaub ntawv network. Nyem OK thaum ua tiav. 4. Lub thawv ntawv lees paub tau tshwm sim. Nyem OK kom tshem lub thawv.
Thaum tus IP chaw nyob tau teeb tsa, lwm yam kev ua haujlwm ntawm iBoot-G2+ tuaj yeem teeb tsa. Nyem rau Discover dua kom rov ua dua cov zaub, taw qhia qhov xav tau iBoot-G2+ thiab nyem rau Tswj | Tua tawm Browser. saib Web Teeb ntu 7 kom teeb tsa lub iBoot.
Lub DMU tseem tuaj yeem siv los xa rov qab iBoot-G2 + rau nws lub Hoobkas Default, lossis rov pib dua iBoot-G2+ admin lo lus zais nkaus xwb. Highlight ib iBoot-G2+ los ntawm cov zaub thiab xaiv Teem | Factory Defaults, los yog teem | Admin Password. Nyob ntawm seb koj xav rov pib dua. Cov no kuj yuav tsum tau ua nyob rau hauv thawj ob feeb ntawm lub zog los yog reboot ntawm iBoot.

Nkag mus IP Chaw Nyob Tshiab rau iBoot IP Chaw Ua Haujlwm tiav

5.3. Lwm txoj hauv kev los teeb tsa tus IP chaw nyob
1. Web Browser ntawm nplooj ntawv teeb tsa saib Network Chaw seem 7.3 2. Hais kom kab Interface saib iBoot-G2+ CLI Syntax seem 9.2

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 10

6. Web Kev ua haujlwm browser

6.1. Kev Tiv Thaiv Lo Lus zais
iBoot-G2+ siv ob lub npe siv / lo lus zais cov ntaub ntawv pov thawj, ib qho rau kev tswj hwm lub zog ib txwm (User) thiab ib qho uas tseem muab kev nkag mus rau kev teeb tsa ua haujlwm (Admin). Qhov kev teeb tsa no tuaj yeem hloov pauv kom xav tau cov ntaub ntawv pov thawj Administrator txhua lub sijhawm lossis tso cai rau tus neeg siv tsis muaj kev tswj hwm qib. saib Passwords / User Settings seem 7.13.

Default Credentials:

Lub luag haujlwm

Tus neeg siv lub npe (tso)

Tus thawj tswj hwm

admin

Cov neeg siv

neeg siv

Password (settable) admin neeg siv

Cov passwords yog qhov tshwj xeeb thiab raws li 3 ntu kawg ntawm MAC chaw nyob ntawm chav tsev. Qhov chaw nyob MAC tuaj yeem pom ntawm daim ntawv nplaum nyob hauv qab ntawm chav tsev. Yam 00-0D-AD-xx-xx-xx. Example: Yog tias koj qhov chaw nyob MAC yog 00-0d-ad-aa-bb-cc ces tus password admin yog adminaabbcc thiab tus user password yog useraabbcc.

Qhib koj tus browser thiab nkag mus rau tus IP chaw nyob ntawm iBoot-G2+ rau hauv qhov chaw nyob bar. Yog tias koj tau hloov qhov chaw nyob IP los ntawm ib qho ntawm cov kev piav qhia, nkag mus rau qhov chaw nyob, txwv tsis pub, siv qhov chaw nyob IP 192.168.1.254.

Sau tus username thiab password thaum raug ceeb toom. Thaum tus username/password zoo tau txais lub Control thiab Status Page yog tshwm sim.

iBoot-G2+ siv lub sijhawm tsis ua haujlwm rau kev nyab xeeb. Lub sijhawm no yog cov neeg siv xaiv los ntawm 0 txog 99 feeb. Kev teeb tsa rau xoom disables lub timeout feature. Thaum tsis muaj kev ua ub no rau lub sijhawm teem sijhawm hauv feeb, tus neeg siv yuav raug txiav tawm thiab tus username thiab password yuav tsum tau nkag dua rau kev nkag. Qhov no yog los tiv thaiv kev raug kaw los ntawm kev tawm hauv tus neeg siv nkag mus.

Raws li iBoot-G2+ tso cai tsuas yog ib qho Web cov neeg siv nkag rau hauv txhua lub sijhawm, siv ceev faj thaum tsis siv lub sijhawm ua haujlwm, vim tias nws muaj peev xwm kaw tawm lwm tus neeg siv los ntawm tsis nco qab nkag mus. Kaw lub browser yuav tsis teev tus neeg siv tawm thiab yuav kaw tawm web nkag mus. Yog tias koj tau raug kaw, nkag mus rau iBoot-G2+ ntawm Telnet thiab rov pib lub tsev, lossis nias lub pob pib dua (saib Tshooj 11)

Thaum nkag mus thiab siv iBoot-G2+ ntawm a web browser, qhov browser kev sib ntsib yuav nyob twj ywm authenticated txawm tias tom qab txiav tawm. Txhawm rau kom muaj kev ruaj ntseg kawg, thov kaw qhov browser kom tshem tawm cov khoom pov thawj pov thawj tom qab txiav tawm ntawm chav tsev.

6.2. Kev them nyiaj yug Mobile Browser
Cov web nplooj ntawv tso tawm rau sab xis yog rau qhov screen loj 700 pixels dav thiab tsawg dua. Lub iBoot-G2+ cia li kuaj pom qhov screen loj thiab kho cov nplooj ntawv kom zoo rau qhov browser mobile. Cov kev xaiv teeb tsa muaj, txawm li cas los xij qee qhov kev teeb tsa yuav xav kom lub xov tooj nyob rau hauv hom portrait kom tau programmed.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 11

6.3. Tswj thiab xwm txheej nplooj
Thaum tus neeg siv tau txais kev pom zoo, Kev Tswj thiab xwm txheej tau tshwm sim. (Tsuas yog ib tus neeg tuaj yeem txuas nrog iBoot-G2+ ib zaug.)
Qhov zoo ntawm nplooj ntawv Tswj thiab xwm txheej yuav raug txiav txim los ntawm cov kev xaiv twg raug xaiv rau Kev nthuav dav, AutoPing thiab Heartbeat.
Yog tias iBoot-G2+ txuas nrog lub sijhawm server (saib Lub Sijhawm Teeb Ntu 7.4), Lub Tsev Haujlwm tseem yuav qhia tsib qhov xwm txheej keeb kwm tsis ntev los no, suav nrog Cov Hluav Taws Xob, Kev Ua Haujlwm, Tus Neeg Siv thiab Lub Sijhawm / Hnub ntawm txhua qhov xwm txheej. Lub iBootG2+ tuav 32 txheej xwm kawg hauv kev nco. Tus neeg siv tuaj yeem nkag mus rau keeb kwm tiav webnplooj ntawv, download tau keeb kwm hauv a .csv file, los yog tshem cov keeb kwm.
6.4. Fais fab xwm txheej
Lub Hwj chim Status seem qhia txog cov xwm txheej tam sim no, thiab tso cai rau kev tswj cov hluav taws xob hluav taws xob. Qhov zoo ntawm Lub Hwj Huam Txheej Txheem Tshooj yog txiav txim siab los ntawm kev teeb tsa ntawm Expansion feature.
Expansion Set rau iBoot-Expansion:
Lub Hwj chim Status seem qhia txog On lossis Off txheej xwm ntawm txhua qhov ntawm peb qhov chaw tswj tau, Main, Exp1 thiab Exp2.
Txhawm rau tswj lub zog, xaiv cov khoom siv uas xav tau thiab nyem rau ntawm lub pob tsim nyog. Yog hais tias lub qhov hluav taws xob txuas mus rau lub qhov hluav taws xob loj, qhov txuas mus rau Cov Lus Tseem Ceeb yuav hloov lub checkbox (raws li qhia rau Exp1) thiab nws yuav raug tswj nyob rau hauv sync nrog Main Outlet.
Lub moos icon yuav qhia tias lub qhov hluav taws xob muaj lub sijhawm ua haujlwm rau kev tswj fais fab.
Expansion Set rau Fais Fab Tswjhwm
Yog hais tias cov chaw nres nkoj nthuav dav tau teeb tsa rau hom tswj fais fab, thiab cov khoom siv tam sim no tswj lub zog, lub xauv lub cim yuav tshwm sim, qhia tias lub qhov hluav taws xob raug kaw los ntawm kev tswj hwm sab nraud. Thaum cov inputs tswj fais fab, tag nrho lwm yam kev tswj tau raug kaw. Qhov no tso cai rau ib lub zos hloov mus xauv lub qhov hluav taws xob On lossis Off.
Thaum lub zog caij tsheb kauj vab, lub zog xwm txheej bar yuav qhia qhov xwm txheej ib ntus, nrog rau keeb kwm xiav. Thaum lub voj voog ua tiav, qhov xwm txheej bar yuav rov qab mus rau nws qhov qub. Txhawm rau rho tawm lub voj voog hluav taws xob, xaiv lub qhov hluav taws xob xav tau thiab nyem rau ntawm Power On lossis Power Off khawm. iBoot-G2+ yuav xav tias qhov xwm txheej xaiv
Expansion Set rau Independent I/O Hom:
Lub Hwj chim Status seem qhia ib qho xwm txheej rau lub qhov hluav taws xob loj. Expansion ports 1 thiab 2 yog tso tawm hauv qab no nyob rau sab nraud I/O seem nrog rau cov xwm txheej ntawm Qhib lossis kaw rau cov tswv yim thiab cov zis ntawm txhua tus. Ib lub pob toggles cov xwm txheej ntawm cov zis rau Exp1 thiab Exp2.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 12

AutoPing Enabled:
Yog tias siv AutoPing feature, nplooj ntawv tseem yuav tso saib cov xwm txheej tam sim no, OK lossis Tsis Ua Haujlwm, rau txhua qhov AutoPing siv, nrog lub txee qhia tias muaj pes tsawg zaus qhov Kev Ua Haujlwm tau tshwm sim. Rov pib dua khawm rau lub Trigger counters tau muab.
Heartbeat Enabled:
Yog tias lub Heartbeat feature tau qhib, nplooj ntawv yuav tso saib cov xwm txheej tam sim no, OK lossis Fail of Heartbeat, nrog rau lub txee qhia tias muaj pes tsawg zaus qhov Kev Ua Haujlwm tau tshwm sim. Rov pib dua khawm rau Trigger counter yog muab.
Navigation Khawm:
Refresh: Siv lub pob Refresh kom tau txais cov xwm txheej tshiab ntawm iBoot. Siv koj tus browser lub khawm refresh tuaj yeem ua rau tsis muaj zog hloov pauv. Yog hais tias lub sij hawm neeg rau zaub mov yog enabled, lub sij hawm ntawm lub xeem refresh yuav pom nyob rau hauv lub sab xis ces kaum.
Logout: Thaum koj ua tiav nrog iBoot, nyem rau ntawm Logout. Ib nplooj ntawv Goodbye yuav tshwm sim. Nplooj ntawv no muaj ib URL txuas rau rov txuas nrog iBoot. Qhov linkback URL yog neeg siv settable. Yog tias tsis muaj qhov txuas rov qab tau teeb tsa, qhov hyperlink yuav yog chav tsev tus IP chaw nyob.
Kev teeb tsa: Txhawm rau nkag mus rau nplooj ntawv teeb tsa, yuav tsum muaj daim ntawv pov thawj tus thawj tswj hwm. Thaum nkag rau hauv raws li Tus Neeg Siv, qhov kev sib tw rau Administrator daim ntawv pov thawj yuav raug muab.

6.5. URL Tswj
iBoot-G2+ tuaj yeem tswj tau ncaj qha los ntawm kev xa cov tsim tiav URL los ntawm lub qhov rais browser lossis HTTP hais kom ua. Cov URL syntax rau kev tswj yog:

http://<address>?c=<channel>&s=<status>&t=<time>&u=<user>&p=<password>

Qhov twg:

Tus IP Chaw Nyob ntawm lub cuab yeej, lossis lub npe DNS uas daws rau IP Chaw Nyob, suav nrog HTTP Chaw nres nkoj yog tias tsis yog tus qauv 80

Channel los yog qhov hluav taws xob tswj 1 = Main ; 2 = Exp1; 3 = np2

Cov xwm txheej hloov qhov hluav taws xob mus rau: 0 = Off ; 1 = Nws; 2 = Lus nug nkaus xwb, tsis muaj qhov hluav taws xob hloov pauv

Lub sijhawm mus ncig

tus neeg siv lossis admin nyob ntawm tus password siv

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 13

password txuam nrog tus neeg siv

Syntax sau ntawv:

Qhov kev txiav txim ntawm cov variables tsis tseem ceeb.

Tus neeg siv thiab tus password tsis tas yuav tsum tau thaum nws pib-Login feature qhib

(saib Passwords / User Settings seem 7.13 rau kev xaiv kev nyab xeeb.)

Tsis muaj channel yuav tsum tau thaum thov raws li txoj cai (xws li yog OK)

Examples:

http://192.168.1.254?c=1&s=1&u=user&p=user

Tig lub qhov hluav taws xob tseem ceeb rau tus neeg siv lub neej ntawd.

http://192.168.1.254?c=1&s=0&t=5

Reboot Main rau 5 vib nas this nrog Auto-Login

http://192.168.1.254:8080?s=2&u=admin&p=admin Return status using http port 8080

URL Cov lus teb
iBoot-G2+ yuav rov qab teb rau a URL txib raws li nram no:
Tau txais lus txib
Tag nrho http teb yog
iBoot Status iBoot-G3-Plus Tau txais lus txib
iBoot-G2+ yuav rov qab teb rau a URL Status Request command raws li nram no:
, ,
Tag nrho http teb yog
iBoot Status iBoot-G3-Plus ON, ON, ON

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 14

7. Web Teeb tsa
iBoot-G2+ teeb tsa seem muaj ob peb nplooj ntawv. Nkag mus rau ib nplooj ntawv los ntawm cov nyees khawm ntawm sab laug ntawm nplooj ntawv. Txhua zaus qhov chaw hloov pauv nyem rau ntawm lub pob Txuag rau nplooj ntawv ntawd kom txuag tau cov kev hloov pauv ua ntej tsiv mus rau nplooj ntawv tom ntej.
7.1. Ntaus Chaw
Qhov chaw ID: Teem 20 lub cim npe kom pom nyob rau sab saum toj ntawm lub tsev. Qhov no pab txheeb xyuas qhov twg iBoot-G2 + tau nkag mus. Lub npe no yog siv rau LLMNR. saib Local Link Multicast Name Resolution (LLMNR) seem 7.15. Lub npe tseem raug xa mus rau huab ntawm kev sau npe mus rau huab account. saib iBoot Cloud Service seem 8.
Lub sij hawm ncua sij hawm: 0 txog 999 vib nas this ncua sij hawm. Thaum fais fab tuag ntau yam khoom siv, ncua sij hawm tuaj yeem teem caij nruab nrab ntawm txhua qhov hluav taws xob.
Lub Npe Lub Npe: Teem ib qho kev ywj pheej 20 lub cim npe los tso tawm rau txhua qhov Main, Exp1 thiab Exp2 Outlets.
Lub Sij Hawm Lub Sij Hawm: 0 txog 999 vib nas this lub zog lub sijhawm. Qhov no yog lub sij hawm ntev lub hwj chim yuav tawm thaum lub sij hawm reboot, los yog nyob rau thaum lub hwj chim tawg. Lub sijhawm lub voj voog tshwj xeeb tuaj yeem teem caij rau Main, Exp1 thiab Exp2.
Initial State: Txhua qhov hluav taws xob tuaj yeem raug teeb tsa rau lub xeev nws yuav xav tias thaum iBoot-G2 + tau qhib lossis rov pib dua. Cov kev xaiv yog: On, Off thiab Last, txhais tau tias lub xeev nws nyob rau hauv thaum lub hwj chim raug tshem tawm los yog pib dua pib.
Hloov Kho Kom Zoo: Kos lub npov no kom tso cai rau cov chaw taws teeb firmware hloov khoom dua tshiab ntawm iBoot-G2+. Thaum lub thawv no tsis tau kuaj xyuas, kev hloov kho firmware yuav tsis tso cai. Thaum kuaj xyuas, hloov kho yuav tsum tshwm sim tsis pub dhau 2 feeb ntawm lub zog los yog tom qab reboot tiav.
Auto Logout: Qhov teeb tsa no teeb tsa lub tsis siv neeg logout rau inactivity ntawm ob qho tib si web thiab cov neeg siv telnet. Nws tuaj yeem teem caij los ntawm 0 mus rau 99 feeb. 0 disables Auto Logout feature.
Raws li iBoot-G2+ tso cai tsuas yog ib qho Web cov neeg siv nkag rau hauv txhua lub sijhawm, siv ceev faj thaum tsis siv lub sijhawm ua haujlwm, vim tias nws muaj peev xwm kaw tawm lwm tus neeg siv los ntawm tsis nco qab nkag mus. Kaw lub browser yuav tsis teev tus neeg siv tawm thiab yuav kaw tawm web nkag mus. Yog tias koj tau raug kaw, nkag mus rau iBootG2+ ntawm Telnet thiab rov pib lub tsev, lossis nias lub pob pib dua.

7.2. Expansion Settings
Hom: iBoot-G2+ muaj peb hom kev ua haujlwm rau kev nthuav dav, txhua tus nrog nws tus kheej teeb tsa. iBoot Expansion Units: Rau siv nrog iBoot-EXP expansion units. Independent I/O: Inputs thiab outputs yog siv raws li txoj cai thiab tswj tsis cuam tshuam nrog lub hwj chim qhov hluav taws xob. Fais fab Control: Rau siv nrog lwm cov keyboards los muab kev tswj fais fab.
Nta yog nyob ntawm seb hom twg yog xaiv

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 15

iBoot Expansion Units
Hom no yog lub neej ntawd thiab siv nrog iBoot-EXP li. Nplooj ntawv tseem ceeb yuav qhia cov xwm txheej thiab tso cai rau kev tswj hwm rau Main, Exp1 thiab Exp2 qhov hluav taws xob.
Nkaum los ntawm Status thiab Tswj: Independantly nkaum cov xwm txheej ntawm Exp1 thiab Exp2 los ntawm Main Status thiab Contol webnplooj. Kos lub thawv kom zais cov xwm txheej yog muaj raws li kev xaiv yog tias koj tsis siv lub peev xwm nthuav dav ntawm iBoot-G2+ ntaus ntawv. Kev zais cov xwm txheej tsis tiv thaiv kev ua haujlwm ntawm Expansion units yuav tsum tau txuas nrog. qhov no tso cai rau cov khoom txuas txuas tau muab zais, tab sis tseem ua haujlwm.
Txuas mus rau Main: Kos lub thawv rau Txuas mus rau Main yuav nws tus kheej ua rau cov xwm txheej ntawm Expansion unit yuav zoo ib yam rau lub Main qhov hluav taws xob ntawm iBoot-G2+. Qhov no yog qhov yooj yim yog tias hloov ob qho khoom siv hluav taws xob ntawm ob lub zog siv hluav taws xob dual. Lub sijhawm ncua sijhawm yuav siv tau.
Kev ywj pheej I/O
Hom no yuav tso saib cov tswv yim thiab tso tawm cov xwm txheej rau Exp1 thiab Exp2 ntawm nplooj ntawv xwm txheej thiab tswj. Kev qhib cov khoom tsim tawm ntawm cov khoom sib txuas tuaj yeem siv los tswj cov khoom siv tsis yog Dataprobe, lossis txuas nrog Dataprobe sab nraud relay module kom tso cai rau kev tswj hwm ntawm cov khoom siv. Cov txheej txheem tawm tswv yim kuj tuaj yeem siv los tswj cov khoom siv Dataprobe uas txhawb nqa DxP raws tu qauv. Tso cai rau kev hloov pauv txuas nrog Exp txuas los tswj cov chaw taws teeb hluav taws xob hluav taws xob lossis txuas rau ntawm ib qho khoom siv tswj hwm DxP.
Nkaum los ntawm Status thiab Tswj: Independantly nkaum cov xwm txheej ntawm Exp1 thiab Exp2 los ntawm Main Status thiab Contol webnplooj. Kos lub thawv kom zais cov xwm txheej yog muaj raws li kev xaiv yog tias koj tsis siv lub peev xwm nthuav dav ntawm iBoot-G2+ ntaus ntawv. Kev zais cov xwm txheej tsis tiv thaiv kev ua haujlwm ntawm I / O yuav tsum tau txuas nrog lossis programmed.
Txhawm rau tso cai rau cov khoom siv ntawm Exp1 thiab Exp2 los tswj cov khoom siv ntxiv ntawm DxP raws tu qauv, nkag mus rau IP chaw nyob, tus lej xov tooj, tus neeg siv lub npe thiab tus lej zais rau cov cuab yeej tswj tau.
Saib Expansion Connections seem 4.3 kom paub meej ntawm Exp connectors thiab qhib cov khoom tso tawm.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 16

Tswj fais fab
Hauv hom no, txhua qhov ntawm ob lub tswv yim tau teeb tsa ntawm nws tus kheej. Xaiv lub hom phiaj qhov hluav taws xob, Main, Exp1 lossis Exp2 thiab qhov kev txiav txim siab xav tau nrog cov tswv yim raug kaw. Cov kev xaiv rau kev ua yog:

Tig lub hwj chim On

Tawm

Tig lub hwj chim tawm

Cycle Hloov lub zog rau lub voj voog

Kev teem sijhawm

Toggle Hloov lub xeev ntawm lub hwj chim.

Los ntawm Off rau On lossis On rau Off,

nyob ntawm lub xeev tam sim no.

Nkaum los ntawm Status thiab Tswj: Independantly nkaum cov xwm txheej ntawm Exp1 thiab Exp2 los ntawm Main Status thiab Contol webnplooj. Kos lub thawv kom zais cov xwm txheej yog muaj raws li kev xaiv yog tias koj tsis siv lub peev xwm nthuav dav ntawm iBoot-G2+ ntaus ntawv. Txij li thaum Lub Hwj Chim Tswjhwm tsuas yog siv cov khoom nkag ntawm Exp connectors, iBoot-EXP expansion qhov hluav taws xob tseem tuaj yeem txuas thiab tswj tau. Kev zais cov xwm txheej tsis tiv thaiv kev ua haujlwm ntawm cov khoom siv lossis cov khoom tawm yuav tsum tau txuas nrog lossis programmed.

Lub hwj chim tswj tau thaum lub tswv yim txuas nrog hauv av. Qhov no ua rau lub sijhawm hloov pauv nyiam rau kev tswj fais fab. Tawm ntawm qhov kev sib txuas kaw thaum siv Cycle lossis Toggle tswj yuav tsis cuam tshuam rau kev ua haujlwm ntawm lub qhov hluav taws xob lossis ua mob rau lub cuab yeej, tab sis nws yuav xav kom koj qhib qhov hloov pauv thiab rov kaw rau qhov kev tshwm sim ntawm kev tswj fais fab tom ntej. Thaum programmed los siv On lossis Off tswj, tuav cov tswv yim rau hauv av yuav kaw lub hwj chim hauv txoj haujlwm xaiv uas tso cai rau kev tuav pov hwm ntawm tag nrho lwm cov kev xaiv tswj. Yog li qhov kev hloov tsis hloov tam sim no yuav xav tau yog tias xauv lub qhov hluav taws xob raws li qhov yuav tsum tau ua. Thaum lub qhov hluav taws xob raug kaw los ntawm cov tswv yim, cov xwm txheej thiab kev tswj hwm yuav pom lub cim xauv ntawm lub qhov hluav taws xob.

Los ntawm kev siv ob lub tswv yim, ib qho teeb tsa rau On thiab lwm qhov rau Off, koj tuaj yeem siv peb txoj haujlwm hloov los tsim ib qho chaw taws teeb txuas rau On - Off hloov. Tso cai rau kev tswj hwm hauv zos nrog rau cov chaw taws teeb tswj txoj hauv kev.

v210312 wb

Cov kev sib txuas nkag mus rau cov hloov pauv rau kev tswj fais fab
iBoot-G2+ / iBoot-G2S

Page 17

7.3 Nws. Network Settings
IP Hom: Xaiv Static los teeb tsa tus IP chaw siv cov teb hauv qab no, lossis DHCP kom tso cai rau DHCP server los teeb tus IP chaw nyob.
IP chaw nyob: Sau tus IP chaw nyob zoo li qub. Qhov no yuav raug teeb tsa yog tias siv DHCP.
Subnet Mask: Nkag mus rau Subnet Mask. Qhov no yuav raug teeb tsa yog tias siv DHCP.
Gateway: Nkag mus rau qhov rooj vag. Qhov no yuav raug teeb tsa yog tias siv DHCP.
DNS: Nkag mus rau Domain Name Server. Qhov no yuav raug teeb tsa yog tias siv DHCP.
7.4 ib. Advanced Network Settings
HTTP Chaw nres nkoj: Qhov kev teeb tsa no yog siv los tso cai nkag mus rau iBoot-G2+ ntawm qhov chaw nres nkoj uas tsis yog lub Web standard Port 80. Yog hais tias qhov chaw nres nkoj hloov, koj yuav tau txheeb xyuas tus txheej txheem thiab chaw nres nkoj naj npawb thaum koj nkag mus rau iBoot tus IP chaw nyob rau hauv koj tus browser. Yog tias qhov chaw nres nkoj tshiab yog 8080 ces siv lub URL yog http://192.168.1.254:8080.
Linkback URL: Qhov kev teeb tsa no tso cai rau kev tswj hwm ntawm hotlink tso tawm ntawm nplooj ntawv Goodbye. Nws tso cai rau siv cov pej xeem IP chaw nyob lossis DNS lub npe hloov chaw nyob IP sab hauv ntawm iBoot-G2+, uas yog qhov chaw teeb tsa. Yog tias qhov teeb tsa no raug tso tseg, qhov hotlink yuav yog IP Chaw Nyob ntawm chav tsev.
Nco tseg: Koj yuav tsum tsis txhob suav nrog http:// ib feem ntawm lub URL. Yog tias koj teeb tsa HTTP Chaw nres nkoj lwm yam tsis yog Web tus qauv 80, koj yuav tsum ntxiv rau qhov URL. examples:[ myiboot.com ][ myiboot.com:8080 ] Telnet Port: Qhov teeb tsa no yog siv los tso cai nkag mus rau iBoot-G2+ ntawm telnet los ntawm cov chaw nres nkoj uas tsis yog tus qauv 23.
DxP Chaw nres nkoj: Qhov chaw teeb tsa no yog siv los tso cai nkag mus rau iBoot-G2+ ntawm Dataprobe Exchange Protocol (DxP) siv cov chaw nres nkoj uas tsis yog tus qauv 9100. saib DxP raws tu qauv ntu 10.
Pab kom DxP Control: Qhov teeb tsa no tso cai rau cov khoom siv sab nraud los tswj iBoot-G2+ ntawm DxP raws tu qauv.
Pab kom DxP Query: Qhov teeb tsa no ua rau cov khoom siv sab nraud los nug cov xwm txheej ntawm iBoot-G2+ ntawm DxP raws tu qauv.
Qhib Cov Kev Pabcuam Huab: Qhov kev teeb tsa no ua rau iBoot-G2+ rau iBoot Cloud Services (iBCS). iBCS tso cai rau iBoot los saib xyuas thiab tswj los ntawm a web portal los ntawm txhua qhov browser. Nws tso cai rau ntau lub iBoots los tswj hwm los ntawm ib lub portal yam tsis tas yuav tsum muaj qhov chaw nres nkoj redirection lossis qhov chaw nyob staic pej xeem ip. Rau cov lus piav qhia ua tiav ntawm iBCS thiab teeb tsa cov lus qhia, saib iBoot Cloud Service ntu 8.
Nco tseg: Tag nrho cov TCP/IP Chaw yuav tsum tau reboot ntawm iBoot-G2+. Tom qab nias Txuag, lub khawm Reboot yuav tshwm sim ib sab ntawm Reset thiab Txuag khawm nyob ze rau sab saum toj ntawm nplooj ntawv. Cov chaw tshiab yuav tsis siv kom txog thaum lub tsev rebooted. Reboot yuav tsis cuam tshuam rau lub zog txoj haujlwm ntawm iBoot-G2+. Thaum Nyem Reboot, nplooj ntawv goodbye tshwm nrog qhov txuas rau rov nkag mus.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 18

Lub Sijhawm Teeb
Cov kev teeb tsa no ua rau iBoot-G2+ kom tau txais lub sijhawm siv tau thiab hnub tim los ntawm lub sijhawm server. Lub sijhawm siv tau thiab Hnub Tim yuav tsum muaj rau keeb kwm keeb kwm thiab teem caij ua kom raug. Chav tsev yuav xav tau kev sib txuas kom zoo kom tso cai rau kev siv internet thiab nkag mus rau lub sijhawm ua haujlwm ntawm lub sijhawm time.nist.gov
Enable: Lub checkbox no thaum kuaj xyuas yuav qhib lub sijhawm server.
Lub Sijhawm Server: Daim teb no yog rau lub sijhawm xav tau Server nkag mus. time.nist.gov yog lub neej ntawd. Koj tuaj yeem sau npe Lub Npe lossis ip hauv daim teb no.
Lub Sijhawm Zone: Daim teb no yog rau Lub Sijhawm Zone ntawm chav tsev. ( siv tau yog -12 txog 12) Default yog -5 EST.
DST Enable: Lub checkbox no thaum kuaj xyuas yuav ua rau lub hnub ci txuag lub sij hawm. (South Hemisphere DST tau txais kev txhawb nqa) DST Pib: Cov kev teeb tsa no yuav qhia lub sijhawm pib rau Hnub Teeb Txuag Sijhawm
Default yog hnub Sunday thib 2 ntawm lub Peb Hlis ntawm 02:00
DST Nres: Cov kev teeb tsa no yuav qhia lub sijhawm nres rau Hnub Teeb Txuag Lub Sijhawm Default yog 1st Hnub Sunday ntawm Kaum Ib Hlis thaum 02:00

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 19

7.5. Kev Ua Zoo Zoo
Lub iBoot-G2+ muaj peev xwm sim ua qhov zoo nkauj kaw ntawm Windows raws li PCs thiab servers (XP thiab tom qab) ua ntej ua qhov nyuaj reboot lossis fais fab tuag. Qhib thiab tswj qhov kev ua tau zoo ntawm qhov tshwj xeeb ntawm nplooj ntawv no. Kev siv lub kaw lus zoo yuav tsum tau teeb tsa ntawm iBoot Utility, uas tuaj yeem pom ntawm dataprobe.com/support-iboot-g2-plus.
Graceful Shutdown cuam tshuam rau txhua hom kev tswj hwm ntawm iBoot-G2+, suav nrog kev hloov pauv phau ntawv, thaum siv cov chaw nres nkoj nthuav dav siv hauv Power Control hom.
Rau txhua qhov ntawm peb qhov hluav taws xob tswj tau teeb tsa;
Enabled lossis Disabled Checked yog enabled.
IP Chaw Nyob. Nkag mus rau IP Chaw Nyob ntawm lub hom phiaj system. (PC khiav iBoot Utilty)
Username thiab Password. Sau tus username thiab password raws nraim li lawv tau nkag rau hauv iBoot Utility ntawm lub hom phiaj system.
Hard shutdown ncua. Thaum xaiv Off los ntawm txhua txoj kev tswj hwm, qhov no yog lub sijhawm, hauv vib nas this rau iBoot-G2 + tos rau qhov kev kaw zoo nkauj kom ua tiav thiab ua tiav. Tom qab lub sijhawm no, ua tiav lossis tsis ua tiav, iBoot-G2+ yuav ua kom lub zog qis rau qhov hluav taws xob xaiv.
Hard Reboot Delay. Thaum lub qhov hluav taws xob yog On, thiab koj xaiv lub voj voog los ntawm txhua txoj kev tswj hwm, qhov no yog lub sijhawm, hauv vib nas this rau iBoot tos rau qhov zoo nkauj reboot kom tiav. Yog hais tias qhov zoo nkauj reboot ua tiav nyob rau hauv lub sij hawm no, lub iBoot Utility yuav pib ntawm lub hom phiaj PC, thiab qhia rau iBoot-G2 + tias lub reboot tiav lawm. Cov lus no yuav ua rau iBoot TSIS ua ib qho nyuaj reboot ntawm lub qhov hluav taws xob xaiv. Yog tias iBoot-G2+ tsis tau txais cov lus rov pib ua tiav los ntawm iBoot Utilty, iBoot-G2+ yuav ua lub zog nyuaj ntawm lub qhov hluav taws xob. (Siv lub sij hawm voj voog raws li programmed hauv ntu Ntaus)
7.6. AutoPing
Lub AutoPing feature tso cai rau iBoot-G2+ tuaj yeem ntes cov cuab yeej ua tsis tiav thiab ua lub sijhawm reboot lossis lwm yam kev tswj fais fab (xws li tig rau qhov taw qhia lossis lub siren). Koj tuaj yeem ua haujlwm txog li plaub tus IP chaw nyob yuav tsum tau pinged ib ntus. Thaum iBoot-G2+ tsis pom cov lus teb los ntawm cov chaw nyob no lawm, lub programmed fais fab tswj muaj nuj nqi yog actuated.
Peb cais AutoPing ua haujlwm tau muab thiab ua haujlwm ntawm ib leeg. AutoPing 1 tuaj yeem siv ob qhov chaw nyob, uas tuaj yeem yog THIAB lossis LOSSIS txuas kom ob qho tib si (AND) lossis ib qho (los yog) yuav tsum tsis ua haujlwm txhawm rau ua qhov kev xaiv.
AutoPing 2 thiab AutoPing 3 yog ib qho chaw nyob ywj pheej.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 20

Examples:
Siv AutoPing ua tus saib xyuas neeg rau zaub mov: iBoot-G2+ tau teeb tsa nrog lub cuab yeej nws saib thiab rov pib dua yog tias tsis muaj lus teb. Zoo tagnrho rau: Kiosks & Servers
Siv Auto-Ping raws li kev pabcuam saib xyuas: iBoot-G2+ tau teeb tsa nrog lub cuab yeej kom rov pib dua, tab sis pings tus tswv tsev chaw taws teeb los sim cov kev sib txuas lus. Zoo tagnrho rau: DSL & Cable Modem Verification
iBoot-G2+ saib xyuas lub network ntaus ntawv thiab ua kom lub tswb nrov lossis rov ua haujlwm dua thaum tsis muaj lus teb Zoo tagnrho rau: Kub Standby Servers, Kev Tswj Ib puag ncig, ceeb toom rau txhua qhov Network tsis ua haujlwm
iBoot-G2+ txhawb nqa peb txoj kev ywj pheej AutoPing, txhua qhov kev tswj hwm lub zog loj, lossis ob qho chaw nthuav dav. Thawj AutoPing channel tuaj yeem ua haujlwm nrog ob qhov sib cais IP Chaw nyob nrog cov laj thawj THIAB / LOSSIS sib piv los txiav txim siab qhov kawg nkaus.

7.7. AutoPing nqis
Chaw Nyob: Sau qhov chaw nyob ntawm lub cuab yeej yuav tsum tau pinged. Qhov no tuaj yeem yog lub npe Domain lossis IP Chaw Nyob
Ping zaus: Sau 1 txog 999 vib nas this. Lub ping yuav tawm mus rau cov khoom xaiv no feem ntau.
Fail Count: Nkag mus rau 1-999 lub sij hawm tus ping xav tau ua tsis tiav ua ntej qhov kev xaiv tau ua. Thaum suav tsis tau tiav lawm, AutoPing qhov kev txiav txim yuav tshwm sim.
Hom: (AutoPing 1 nkaus xwb) Xaiv los ntawm A nkaus xwb, A Thiab B, A lossis B. Nrog Thiab, ob qho tib si AutoPings yuav tsum dhau lawv qhov tsis suav kom ua rau Kev Ua. Nrog Los Yog, Qhov Kev Ua Haujlwm yuav tshwm sim yog tias AutoPing ua tsis tiav.
Tswj: Xaiv Main rau lub qhov hluav taws xob sab hauv, lossis Exp1, Exp2 rau ib qho ntawm ob qhov chaw txuas ntxiv.

Kev Ua: Xaiv los ntawm Tsis Muaj Ntawm Latch
Ntawm Follow
Tawm Latch
Tawm Ua raws
Lub voj voog (Cycle) Sijhawm

AutoPing yuav tsis ua dab tsi thaum Fail.
Thaum tshwm sim, iBoot-G2+ yuav siv zog rau thiab nyob twj ywm kom txog thaum hloov pauv ntawm web, telnet, DxP, thiab lwm yam.
Thaum ua tiav, iBoot-G2+ yuav qhib. Thaum cov lus teb ping rov qab los, iBoot-G2+ yuav raug kaw.
Thaum tshwm sim, iBoot-G2+ yuav tua hluav taws thiab nyob twj ywm kom txog thaum hloov ntawm lub web, telnet, DxP, thiab lwm yam.
Thaum ua tiav, iBoot-G2+ yuav raug kaw. Thaum cov lus teb ping rov qab, iBoot-G2+ yuav siv zog rau.
Thaum tshwm sim, iBoot-G2+ yuav voj voog lub zog. Yog tias lub voj voog fais fab tsis ua rau cov lus teb ping lub iBoot-G2+ tuaj yeem rov ua dua. Tus naj npawb ntawm lub sij hawm iBoot-G2+ yuav voj voog yog teem los ntawm lub sij hawm teem. Txhawm rau kom muaj lub voj voog iBoot lub zog 3 zaug kom tau txais lub kaw lus teb dua, teem caij rau 3.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 21

Rov pib dua: Tom qab autoping Fail, thiab ib qho kev txiav txim tshwm sim, lub sij hawm rov pib dua yog lub sij hawm ntev iBoot-G2+ yuav tos ua ntej rov pib dua ping dua.
Nrog AutoPing ua haujlwm, nplooj ntawv tseem ceeb iBoot-G2+ yuav tso saib cov xwm txheej tam sim no ntawm cov yam ntxwv no. Cov xwm txheej yuav OK los qhia tias iBoot-G2+ tau txais cov lus teb rau ping, lossis tias lub txee tsis tau dhau los.
Yog tias qhov suav tsis tau dhau lawm, cov xwm txheej yuav hloov mus rau FAIL. Lub Trigger Counter qhia cov naj npawb ntawm lub sijhawm AutoPing qhov kev txiav txim tau tshwm sim. Lub txee rov pib dua khawm yog muab.

7.8. Lub plawv dhia
Zoo li AutoPing, lub plawv dhia saib tso cai rau iBoot-G2+ kom pom qhov ua tsis tiav hauv cov khoom siv tseem ceeb. Nrog lub Heartbeat saib enabled, iBoot-G2+ yuav cia siab tias yuav muaj lus, xws li los ntawm USB chaw nres nkoj los yog network ntawm ib ntus.

Thaum nws tsis nco txog tus neeg siv cov lej ntawm lub sijhawm, nws yuav ua nws qhov programmed.

Siv lub plawv dhia kom paub tseeb tias koj lub server khiav. Thaum lub server poob, nws yuav raug rebooted.

Lub plawv dhia tuaj yeem tsim los ntawm ntau txoj hauv kev;

Siv iBoot Utility. Ib Windows .dll file kuj muaj rau
siv los ntawm Windows applications. Lub Heartbeat Protocol yuav tso cai
developers kom imbed qhov muaj peev xwm ncaj qha rau hauv lawv cov khoom software.

Lub plawv dhia

Tag nrho cov saum toj no muaj nyob rau ntawm dataprobe.com/support-iboot-g2-plus

Teb

7.9 ib. Heartbeat Settings

Source: Xaiv lub hauv paus ntawm lub plawv dhia, xws li USB, Network lossis Tsis muaj (lub plawv dhia tsis siv). Thaum siv Network, nkag mus rau Chaw nres nkoj kom cia siab tias lub plawv dhia. Lub neej ntawd yog 9100. (Yog tias Lub Sijhawm Server qhib, chaw nres nkoj 9100 tsis tuaj yeem ua
hloov, thiab 9100 yog siv)
Zaus: Sau 1 txog 999 vib nas this. Yog hais tias lub plawv dhia tsis tau txais nyob rau hauv lub sij hawm no nws yuav increment lub txee.
Fail Counter: Sau tus naj npawb ntawm lub sij hawm (1-99) lub plawv dhia yuav tsum ua tsis tau ua ntej qhov kev xaiv ua. Thaum lub ntsuas qhov poob mus txog, lub plawv dhia yuav tshwm sim.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 22

Kev Ua: xaiv los ntawm Tsis Muaj Ntawm Latch
Ntawm Follow
Tawm Latch
Tawm Ua raws
Lub voj voog (Cycle) Sijhawm

Lub plawv dhia yuav tsis ua dab tsi thaum Fail.
Thaum tshwm sim, iBoot-G2+ yuav siv zog rau thiab nyob twj ywm kom txog thaum hloov pauv ntawm web, telnet, DxP, thiab lwm yam.
Thaum ua tiav, iBoot-G2+ yuav qhib. Thaum cov lus teb ping rov qab los, iBoot-G2+ yuav raug kaw.
Thaum tshwm sim, iBoot-G2+ yuav tua hluav taws thiab nyob twj ywm kom txog thaum hloov ntawm lub web, telnet, DxP, thiab lwm yam.
Thaum ua tiav, iBoot-G2+ yuav raug kaw. Thaum cov lus teb ping rov qab, iBoot-G2+ yuav siv zog rau.
Thaum tshwm sim, iBoot-G2+ yuav voj voog lub zog. Yog tias lub voj voog fais fab tsis ua rau cov lus teb ping lub iBoot-G2+ tuaj yeem rov ua dua. Tus naj npawb ntawm lub sij hawm iBoot-G2+ yuav voj voog yog teem los ntawm lub sij hawm teem. Txhawm rau kom muaj lub voj voog iBoot lub zog 3 zaug kom tau txais lub kaw lus teb dua, teem caij rau 3.

Qhov hluav taws xob: Xaiv Main rau lub qhov hluav taws xob sab hauv, lossis Exp1, Exp2 rau ob qho chaw txuas ntxiv.

7.10 Nws. Siv Heartbeat Monitor
Nrog Heartbeat ua haujlwm, lub ntsiab iBoot-G2+ nplooj ntawv yuav tso saib cov xwm txheej tam sim no ntawm cov yam ntxwv no. Cov xwm txheej yuav OK los qhia tias iBoot-G2+ tau txais lub plawv dhia, lossis tias qhov ntsuas tsis tau dhau los.
Yog tias qhov suav tsis tau dhau lawm, cov xwm txheej yuav hloov mus rau Triggered. Lub Tuam Txhab Trigger qhia cov naj npawb ntawm lub sijhawm Heartbeat feature tau tshwm sim. Lub txee rov pib dua khawm yog muab thaum nkag rau hauv nrog System password.

7.11 ib. Siv iBoot Utility
Lub plawv dhia tsim yog ib qho feature biuilt uinto iBoot Utility program thiab cov lus qhia muaj nyob rau ntawm dataprobe.com/support-iboot-g2-plus

7.12 ib. Kev teem sijhawm
iBoot-G2+ tuaj yeem teem sijhawm txog kaum plaub lub sijhawm rov muaj zog dua. Teem lub hnub pib thiab lub sijhawm, txhua lub voj voog rov ua dua, qhov yuav tsum tau ua thiab qhov hluav taws xob siv rau txhua qhov.
Txhawm rau pab kom lub sijhawm teem sijhawm ua haujlwm: Saib Advanced Network Time Setup section 7.4.
Thaum lub sij hawm neeg rau zaub mov ua haujlwm, cov xwm txheej tau teem tseg tuaj yeem tshwm sim. Txog li kaum plaub lub sijhawm teem caij ywj pheej tuaj yeem tsim tau.
Hnub tim: Teem lub hnub pib rau qhov kev tshwm sim. Cov hom ntawv rau hnub tim yog mm/dd/yyyy.
Sijhawm: Teem lub sijhawm pib rau qhov kev tshwm sim. Hom ntawv rau lub sij hawm yog hh:mm nrog cov sij hawm hauv 24 teev hom.
Rov ua dua: Teem tus lej rov ua dua, yog tias xav tau. Teem tus naj npawb ntawm 0 txog 999 thiab Hnub, Teev, lossis feeb. Txhawm rau kom lub sijhawm rov ua dua txhua ob hnub, muab tus lej no rau 2. Txhawm rau khiav ib zaug xwb, muab qhov no rau 0.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 23

Action: Teeb qhov kev tshwm sim Action; On, Off lossis Cycle.
Qhov hluav taws xob: Teeb lub qhov hluav taws xob kom tswj tau los ntawm qhov xwm txheej. Yog tias Expansion units txuas nrog Main, tswj Main tseem yuav tswj tau qhov txuas txuas ntxiv.
Enable: Thaum kuaj xyuas qhov xwm txheej tau qhib. Unchecked qhov kev tshwm sim yog neeg xiam. Ib qho kev tshwm sim tsis taus yuav tsis tswj hwm lub hwj chim, tab sis yuav suav rov qab sim dua yog tias Hnub thiab Lub Sijhawm dhau mus thaum nws yuav tshwm sim.
Clear: Ncua qhov kev tshwm sim tau teem tseg. (Rho tawm programmed parameter los ntawm cov npe)
Nyem Txuag kom txuag tau qhov chaw tam sim no. Nyem Pib dua los rho tawm cov kev hloov pauv tsis xav tau.

7.13. Passwords / User Settings
Lub iBoot-G2+ txhawb peb hom kev siv thiab tus password ua haujlwm.

Yuav tsum tau nkag mus: hom no txhawb ob tus neeg siv thiab Admin cov neeg siv. Txhua tus neeg siv muaj tus password settable.

Auto Login: Hom no tsis tas yuav tsum muaj tus neeg siv lub npe lossis tus password rau tus neeg siv qib ua haujlwm. Tsis muaj kev sib tw nkag mus yuav tsum tau ua rau txhua hom kev ua haujlwm, kom txog thaum thov kev teeb tsa. Tus Admin username thiab password yuav tsum muaj rau txhua qhov haujlwm ntawm admin.

User Disabled: Tsis muaj tus neeg siv tus account. Tus Admin username thiab password yuav tsum tau ua haujlwm thiab teeb tsa lub luag haujlwm thoob plaws txhua hom kev ua haujlwm. Qhov no yog lub Hoobkas default hom.

Ob tug passwords yog siv los ntawm iBoot. Nyob rau hauv tus ID nkag mus xav tau hom, Tus Neeg Siv Password tso cai rau nkag mus rau kev tswj ntawm iBoot, tab sis tsis mus rau lub teeb functions. Nyem rau ntawm lub pob teeb tso cai rau tus thawj tswj hwm nkag rau hauv. Cov passwords tuaj yeem ntev txog 20 tus cim ntev thiab yog qhov tseem ceeb.

Sau tus password tam sim no ces tus password tshiab ob zaug kom paub meej.
Default Credentials

Role Administrator User

Tus neeg siv lub npe (tso) tus neeg siv admin

Password (neeg siv teeb) *adminxxxxxx *userxxxxxx

* Cov passwords yog tshwj xeeb thiab raws li MAC chaw nyob ntawm chav tsev. (tus xxxxxx yog 3 ntu kawg) Qhov chaw nyob MAC tuaj yeem pom ntawm daim ntawv nplaum nyob hauv qab ntawm chav tsev. Yam 00-0D-AD-XX-XX-XX. Example: Yog tias koj qhov chaw nyob MAC yog 00-0d-ad-aa-bb-cc ces tus password admin yog adminaabbcc thiab tus user password yog useraabbcc.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 24

7.14 ib. Disable OFF
Cov yam ntxwv tshiab no hauv iBoot-G2+ version 1.40 thiab saum toj no tau lees paub tias lub zog rau lub cuab yeej tswj hwm yuav ib txwm nyob rau thaum twg ua tau. Tsis muaj teeb meem tig los yog tawm lub hwj chim tawm yog ua tau.
Txhawm rau siv "Disable Off" feature
WEB Ntawm Kev Teeb> Ntaus nplooj ntawv kos lub thawv qhib ib sab ntawm Disable Off: kev xaiv thiab Txuag.
CLI - telnet mus rau chav tsev thiab muab qhov Command Line Interface hais kom ua.
teem disable tawm yog
Siv cov hauv qab no los txiav txim qhov xwm txheej tam sim no ntawm tus yam ntxwv.
tau lov tes taw
Cov lus teb yuav yog Disable Off: Yog lossis Disable Off: Tsis yog
Yog yuav qhia tias nws yog enabled thiab Tsis yog yuav qhia tias nws yog neeg xiam. Los ntawm lub neej ntawd, lub feature yog neeg xiam.
Txhawm rau kom tsis txhob siv qhov tshwj xeeb no teeb tsa cov lus txib
teem disable off no
Thaum lub feature qhib, cov hauv qab no yuav tshwm sim:
Yog tias lub qhov hluav taws xob raug kaw thaum lub sijhawm ua haujlwm, lub qhov hluav taws xob yuav qhib On Initial state yuav raug programmed rau On
Thawj lub xeev yuav tsis tso cai rau kev ua haujlwm rau Off lossis Xeem Yog tias AutoPing qhov kev txiav txim siab rau On-Follow, Off-Latch lossis Off-Follow, qhov kev txiav txim siab yuav yog
reprogrammed li Tsis muaj AutoPing qhov kev txiav txim yuav tsis tso cai rau kev ua haujlwm rau On-Follow, Off-Latch lossis Off-Latch Yog tias Lub Sijhawm Teem Sijhawm Teeb Meem muaj kev ua haujlwm rau Off, nws yuav raug reprogrammed rau On Schedule Settings yuav tsis tso cai rau kev ua haujlwm tawm Web nplooj ntawv yuav tsis qhia lub "Power OFF" khawm Web Nplooj ntawv yuav tsis ua HTTP POST rau Off. URL kev tswj hwm yuav tsis ua tiav qhov kev thov tsis raug cai (s=0) Ib daim ntawv thov raug lees paub nrog a
lub sij hawm teem (s=0&t=1) ntawm 1 lossis ntau dua yuav raug ua tiav tso cai rau URL tswj kom voj voog tawm, ces rov qab rau URL kev tswj hwm yuav tsis ua tiav qhov tsim nyog ntawm kev thov raws li txoj cai nrog lub sijhawm teem sijhawm (s=1&t=1) ntawm 1 lossis ntau dua
(kev ua tsis taus URL tswj kom lub voj voog ntawm ces tawm) DxP tswj yuav tsis ua haujlwm Off command DxP tswj yuav tsis ua cov mem tes ntawm cov lus txib. pulse ntawm cov lus txib xaus nrog qhov hluav taws xob tawm DxP tswj Pulse Off cov lus txib, thaum ua tiav, yuav tsis tso cai rau lub voj voog cov lus txib kom dhau lawv.
(tsis txhob muaj peev xwm muaj lub voj voog ua tiav raws li tawm) Cycle commands, thaum tab tom ua tiav, yuav tsis tso cai rau lub voj voog tshiab los hla lawv.
(tsis txhob muaj peev xwm ua kom tiav lub voj voog xaus raws li tawm) Command Line Interface (CLI) tswj yuav tsis ua haujlwm "tawm qhov hluav taws xob" Yog tias huab tswj tau qhib, cov lus txib Off yuav tsis ua tiav.
Disabled Thaum lub feature yog neeg xiam oob qhab, tag nrho cov hom uas tuaj yeem tig lub hwj chim tawm yuav muaj thiab ua haujlwm.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 25

7.15 Nws. Local Link Multicast Name Resolution (LLMNR)
Qhov Link-Local Multicast Name Resolution (LLMNR) yog cov txheej txheem raws li Domain Name System (DNS) pob ntawv hom uas tso cai rau cov tswv ua lub npe daws teeb meem ntawm tib qhov txuas hauv zos.
Ntawm cov tes hauj lwm feem ntau koj yuav tuaj yeem nkag mus rau iBoot-G2+ los ntawm nws lub npe ntaus ntawv thaum nyob hauv lub network hauv zos.
Los ntawm lub neej ntawd lub npe yog iBoot-G2-xxxx qhov twg xxxx yog kawg 4 ntu ntawm MAC chaw nyob rau koj iBootG2. Thaum koj reprogram lub npe ntawm lub cuab yeej, reboot yuav tsum tau siv lub npe tshiab li LLMNR rau lub cuab yeej.
Lub npe LLMNR tsis tso cai rau qhov chaw. Yog tias siv LLMNR feature kom nkag mus rau iBoot-G2, tsis txhob siv qhov chaw hauv lub npe. Thaum nkag mus rau lub cuab yeej ntaus ntawv ua tiav URL suav nrog http:// yog tias koj xav tau kom tsis txhob tshawb hauv internet rau lub npe. (http://iBoot-G2-xxxx)
Thaum qhov chaw ID hloov pauv, lub cuab yeej yuav xav kom rov pib dua los sau npe tshiab rau koj lub network llmnr server. Qhov no txhais tau tias kev nkag mus siv http://iboot-g2p-fa80 yuav tsum ua haujlwm, lossis lub npe hloov pauv myiboot yuav siv tau li http://myiboot . Txhawm rau siv llmnr, koj yuav tsum xaiv lub npe tsis muaj qhov chaw lossis cov cim tshwj xeeb. (tso cai dashes)

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 26

8. iBoot Cloud Service
iBoot Cloud Service (iBCS) tso cai rau cov neeg siv khoom nrog iBoot-G2 Series cov khoom siv nkag mus thiab tswj ntau iBoots hauv ntau qhov chaw los ntawm ib lub portal nrog ib qho kev kos npe rau.

iBCS yuav tsis tsuas yog ua kom siv iBoots yooj yim dua, los ntawm kev sib sau tag nrho cov chav nyob rau hauv ib qho kev kos npe thiab sib cuam tshuam, nws tseem yuav txhim kho cov xwm txheej uas iBoot tuaj yeem xa mus.
Cov neeg siv khoom nrog Dynamic IP chaw nyob yuav ib txwm tuaj yeem nkag mus rau lawv iBoot los ntawm txhua qhov chaw. Cov neeg siv khoom uas tsis tso cai rau hauv kev sib txuas tuaj yeem nkag mus rau lawv cov iBoots. Cov chaw muab kev pabcuam tuaj yeem tswj hwm ntau tus neeg siv nyiaj nrog ntau hom kev ruaj ntseg
iBoot Cloud Service yog tsim muaj rau peb cov neeg siv tam sim no dawb xwb, thiab tab tom hloov zuj zus. Cov duab thaij duab hauv qab no tuaj yeem txhim kho raws li lub sijhawm dhau los txij li kev txhim kho phau ntawv no. Tag nrho cov ntsiab lus ntawm Kev Pabcuam ntawm iBoot Cloud Service muaj nyob ntawm no.

8.1. iBCS Teeb & Kev Ua Haujlwm
Kev siv iBoot Cloud Services xav kom iBoot teeb tsa kom nkag mus rau Is Taws Nem. Thov rovview lub installation thiab configuration txheej txheem los xyuas kom meej kev teeb tsa.
Hardware Installation section 4 and Initial configuration section 5
a. Tsim tus account nrog iBoot Cloud Server
Mus ntsib https://iboot.co los ntawm koj tus browser Nyem rau Sau Npe Ua kom tiav cov ntaub ntawv lees paub sau npe los ntawm txhaj
ntawm qhov txuas tau muab hauv email.

b. Pab kom Cloud Services ntawm iBoot
Nkag mus rau hauv iBoot nrog tus thawj tswj txoj cai Mus rau nplooj ntawv Advanced Network teeb tsa Tshawb xyuas Kev Pabcuam Huab Cua, thiab Txuag: Tsis pub dhau 30 vib nas this, 8 lub cim ua kom
code yuav tshwm. Cov cai no kuj yog qhov hotlink rau Cloud Service.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 27

c. Sau npe iBoot nrog Cloud Account Nyem rau ntawm Kev Ua Haujlwm code txhawm rau sau npe iBoot nrog Kev Pabcuam.
Koj yuav raug xa rov qab mus rau Kev Pabcuam. ID nkag mus nrog koj tus account thiab iBoot yuav cia li sau npe nrog koj tus account.
Xwb, koj tuaj yeem nkag mus rau Kev Pabcuam thiab nyem rau ntawm Ntxiv | Ntaus thiab nkag mus rau tus lej ua kom ua haujlwm hauv thaj teb tau muab.
d. iBCS Main Page Lub iBCS lub ntsiab web nplooj ntawv muab ib qho Icon rau Accout Settings Tus Accounts Settings Icon. yuav qhia: Kev Ceeb Toom Chaw: Qhov twg thiab Thaum twg xa tawm offline thiab online stats hloov pauv Cov Nqi Them Nqi: Cov ntaub ntawv nkag mus rau tus lej suav nrog Multiuser Hom thiab LDAP chaw Logout: Tshem tawm ntawm Interface
Lub iBCS yuav alos muab Navivation Bar thiab nws yuav qhia cov hauv qab no:
Nrhiav: Nrhiav rau Cov khoom siv lossis qhov chaw View: Chaw, Keeb Kwm lossis Kev Txhawb Nqa
Qhov chaw: Pab pawg iBoots los ntawm qhov chaw. Keeb Kwm: Qhia keeb kwm ntawm kev nkag mus rau tus account. Kev them nyiaj yug: Yuav qhib ib lub tab tshiab rau cov nplooj ntawv txhawb Ntxiv: Cov cuab yeej thiab cov npe chaw tuaj yeem ntxiv Cov Ntaus: Nkag mus rau Qhov Chaw Ua Haujlwm Code: Tsim ib qho chaw huab tshiab nthuav dav: Txhua qhov chaw pom yuav nthuav dav Collapse Tag nrho: Txhua qhov chaw pom wqill yuav collapsed # los yog Tsis muaj xaiv: tus naj npawb ntawm cov qhov hluav taws xob xaiv Clear All: De-Xaiv tag nrho cov qhov hluav taws xob
e. Tswj Lub Hwj Chim los ntawm Huab Qhov screen xwm txheej yuav nthuav dav muaj iBoots sau npe nrog huab. Koj tuaj yeem ntxiv qhov chaw thiab pab pawg iBoots los ntawm qhov chaw.
Txhua iBoot qhia nws cov xwm txheej fais fab thiab thaum nthuav dav, AutoPing xwm txheej yog teeb tsa.
Xaiv thiab qhov hluav taws xob thiab tom qab ntawd khawm On, Off lossis Cycle uas yuav tshwm sim hauv Navigation bar.
f. Muab Cov Npe thiab Chaw Nyob Koj tuaj yeem tsim ntau qhov chaw thiab muab ntau lub iBoots rau ib qho chaw. Txhawm rau ntxiv qhov chaw, nyem Ntxiv Chaw los ntawm Navigation bar. Lub npe qhov chaw thiab Ntxiv qhov chaw khawm. Txhawm rau hloov npe lossis hloov chaw ntawm iBoot, Nyem qhov Kho kom raug icon rau iBoot.
g. Siv Website rau kev pab ntxiv Mus rau nplooj ntawv no kom pab tau cov yeeb yaj duab thiab lwm yam kev qhia. https://dataprobe.com/iboot-cloud-service/

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 28

Command Line Interface Lub iBoot-G2 + Command Line Interface (CLI) muab cov ntawv nyeem raws li kev sib txuas lus nrog iBoot-G2+. Cov syntax ntawm CLI siv cov txheej txheem yooj yim (hloov qhov sib txawv) thiab Tau (rov qab tau qhov sib txawv). CLI tau nkag mus los ntawm Telnet raws tu qauv, uas yuav tsum muaj Telnet tus thov kev pab cuam, lossis ntawm USB uas yuav tsum muaj kev sib txuas lus sib txuas. Windows 10 tsis suav nrog telnet pre-installed lossis serial client. Koj yuav tsum ua kom lawv nyob hauv Windows, lossis siv lwm cov kev pab cuam.
Dataprobe tau tsim ib qho dawb telnet thiab serial utility hu ua EZ Terminal. Download tau muaj nyob ntawm no: dataprobe.com/support/shared/ezterm.exe
8.2. CLI Access
Ntawm Telnet
Qhib koj tus neeg siv Telnet thiab txuas mus rau qhov chaw nyob IP teem rau iBoot-G2+.
Ntawm USB
Qhib tus neeg siv console thiab txuas mus rau COM chaw nres nkoj muab rau iBoot-G2+. Cov kev sib txuas lus tsis yog: 9600bps. 8 ib data. Tsis muaj parity. 1 Nres me ntsis. Tsis muaj Flow Control. Thaum qhov kev sib txuas tau ua tiav, xa Enter.
CLI siv tib txoj kev xaiv kev nyab xeeb raws li qhov web browser. Saib Passwords/User Settings seem 7.13 rau kev piav qhia ntawm cov kev xaiv rau cov neeg siv teeb tsa thiab kev ruaj ntseg.
Tom qab kev sib txuas ua tiav, Tus Neeg Siv> tam sim no tshwm sim. Sau tus username: user lossis admin thiab nias Enter. Cov lus qhia yuav hloov mus rau Password>. Sau tus neeg siv lossis admin password thiab nias Enter. Cov lus qhia yuav hloov mus rau iBoot>. Qhov no qhia tias kev nkag mus tau zoo. Sau cov lus txib raws li xav tau. (saib cov npe muaj nyob hauv iBoot-G2+ CLI Syntax ntu 9.2 hauv qab no. Thaum ua tiav, nkag mus rau cov lus txib tawm.
Nco tseg: Kev sib tham telnet yuav pib txiav tawm yog tias tsis muaj haujlwm. Qhov siab tshaj plaws auto-disconnect lub sij hawm yog 8 feeb. Yog tias qhov teeb tsa Auto-Logout luv dua 8 feeb, qhov teeb tsa yuav siv tau. Txhawm rau zam qhov no thiab siv lub sijhawm pib txiav tawm ntev dua, siv tus neeg siv telnet uas xa mus rau Tsis Muaj Kev Ua Haujlwm (NOP) cov lus txib, zoo li Dtelnet.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 29

8.3. iBoot-G2+ CLI Syntax
txib
Tswj cov lus txib
teeb < main | qhov hluav taws xob | exp1 | exp2 | lub npe ntawm qhov muag >
tau qhov hluav taws xob tau txais xwm txheej

Kev piav qhia

Factory Default

Cov lus txib no yog siv los saib xyuas thiab tswj lub qhov hluav taws xob.

Cov lus txib no tswj hwm lub xeev lub zog. "main" lossis "qhov hluav taws xob" los tswj lub qhov hluav taws xob loj. "Exp1" lossis "Exp2" los tswj cov qhov hluav taws xob nthuav dav. los yog siv lub npe qhov hluav taws xob programmed.
Hauv I / O hom Exp1 ib qho Exp2 tuaj yeem siv qhib thiab kaw

Cov lus txib no rov qab cov xwm txheej tam sim no ntawm lub ntsiab thiab nthuav tawm qhov hluav taws xob. Cov lus teb rau cov lus txib no yog txiav txim siab los ntawm kev nthuav dav hom teeb tsa. Cov txiaj ntsig yuav siv cov npe ntawm qhov hluav taws xob.

Yog iBoot-Exp lossis Fais Fab Tswj hom:

Main Qhov hluav taws xob: On

Exp 1:

Nyob rau L (L qhia Xauv rau Main)

Exp 2:

Tawm

Yog Independent I/O hom:

Main Qhov hluav taws xob: On

Exp1: Input: Output:

Qhib Kaw

Exp2: Input: Output:

Qhib qhib

Device Commands
teeb qhov chaw <20 char. max >
tau qhov chaw teeb < main | qhov hluav taws xob | exp1 | exp2 | lub npe qhov hluav taws xob> lub sij hawm voj voog <1-999> tau lub voj voog teem ncua <0-999>
tau ncua sij hawm teem caij <0-99> tau teem caij ncua < lub ntsiab | qhov hluav taws xob | exp1 | exp2 | qhov hluav taws xob lub npe> thawj lub xeev tau pib lub xeev teeb npe <1 char. Max>

Teem cov lus txib muaj rau tus thawj tswj hwm nkaus xwb

Cov lus txib no yog siv los teeb tsa iBoot-G2 qhov chaw ID. qhov no yog siv rau LLMNR thiab Cloud Registration
Qhia lub npe qhov chaw tam sim no
Cov lus txib no teem caij lub voj voog nyob hauv vib nas this ntawm ib lub qhov hluav taws xob.
Qhia lub sij hawm lub voj voog tam sim no rau txhua qhov hluav taws xob
Qhov kev hais kom ua no teem sijhawm ncua sijhawm hauv vib nas this siv thaum ntau qhov kev tawm tsam raug tswj
Qhia lub sij hawm ncua sij hawm siv ntawm qhov hluav taws xob
Qhov kev hais kom ua no teev lub sijhawm pib logout hauv feeb
Qhia txog lub sijhawm tam sim no
Cov lus txib no tau teeb tsa thawj lub xeev ntawm ib tus neeg qhov hluav taws xob thaum iBoot-G2 + tau qhib lossis rov pib dua.
Qhia thawj lub xeev rau txhua qhov hluav taws xob
Qhov no yuav qhia cov npe ntawm tus kheej

iBoot-G2P-xxxx 5 1 2 Xeem

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 30

Device Commands (txuas ntxiv)
teem upgrade enable
tau upgrade set disable off tau lov tes taw login logout reboot

Teem cov lus txib muaj rau tus thawj tswj hwm nkaus xwb

Cov lus txib no enables los yog disables lub peev xwm upload

tsis muaj

tshiab firmware

Qhia upload firmware enabled raws li txoj cai.

Qhov no yuav pab kom diable off feature. Saib tshooj 7.14

tsis muaj

Qhia lov tes taw qhov xwm txheej.

Kev ceeb toom rau cov ntaub ntawv pov thawj admin thaum nkag rau hauv raws li tus neeg siv

Terminates lub rooj sib tham

Cov lus txib no reboots iBoot-G2+.

Cov Lus Qhia Zoo Tshaj Plaws

Teem cov lus txib muaj rau tus thawj tswj hwm nkaus xwb

qib gsd

Cov lus txib no rov qab tag nrho cov chaw tam sim no rau Graceful Shutdown

Main: Enabled: IP Chaw Nyob: Username: Password: Hard Shutdown Delay: Hard Reboot Delay:

Nr 0.0.0.0
120

Exp1: Enabled: IP Chaw Nyob: Username: Password: Hard Shutdown Delay: Hard Reboot Delay:

Nr 0.0.0.0
120

Exp2: Enabled: IP Chaw Nyob: Username: Password: Hard Shutdown Delay: Hard Reboot Delay:

Nr 0.0.0.0
120

teeb gsd < main | exp1 | exp2> enabled

Cov lus txib no enables los yog disables lub shutdown ncua

tsis muaj

txheej txheem.

teev gsd ipaddress

Cov lus txib no yog siv los teeb tsa IP chaw nyob ntawm lub hom phiaj rau kev kaw zoo nkauj.

teev gsd username <1 char. max >

Cov lus txib no teev username ntawm lub hom phiaj system

teev gsd password <1 char. max >

Cov lus txib no teev tus password ntawm lub hom phiaj system

teev gsd shutdowndelay <1-2>

Qhov kev hais kom ua no teeb tsa lub sijhawm kaw hauv vib nas this

teev gsd rebootdelay Qhov kev hais kom ua no teeb tsa lub reboot qeeb hauv vib nas this <1-2>

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 31

Expansion Commands
tau expansion

Cov lus txib no tsuas yog muaj rau tus thawj tswj hwm.

Cov lus txib no qhia txog cov chaw tam sim no ntawm cov chaw nres nkoj nthuav dav. Cov lus teb rau cov lus txib no yog txiav txim siab los ntawm kev nthuav dav hom teeb tsa.

Yog iBoot-Exp hom:
Hom: iBoot Expansion Units Txuas: Exp 1: Yog Exp 2: Tsis yog

Yog Lub Zog:
Hom: Fais Fab Tswj Tswv Yim 1: Lub Ntsiab Ntawm Cov Tswv Yim 2: Lub Ntsiab Tawm

Yog Independent I/O hom:

Hom: Independent I/O

Cov zis:

Exp1:

IP Chaw Nyob: 192.168.1.200

Tshaj tawm:

Exp2:

IP Chaw Nyob: 192.168.1.205

Tshaj tawm:

teeb zais
teeb tsa hom kev nthuav dav
teem expansion txuas
teem expansion ipaddress
teem expansion relay <1-2>
teem expansion username <1 cim>
teem expansion password <1 cim>

Qhov kev hais kom ua no yuav zais Exp1 otr Exp2 xwm txheej los ntawm nplooj ntawv xwm txheej thiab tau txais cov lus teb.
Cov lus txib no teev cov hom rau cov chaw nres nkoj nthuav dav rau iBoot-Expansion lossis Sab Nraud I / O lossis Fais Fab Tswj
Cov lus txib no tau teeb tsa Exp1 lossis Exp2 kom txuas rau lub qhov hluav taws xob tseem ceeb rau kev tswj hwm ib txhij. Cov lus txib no siv tau tsuas yog thaum nthuav hom yog iBoot Expansion Units.
Cov lus txib no tau teeb tsa tus IP chaw nyob xa cov ntaub ntawv tawm tswv yim ntawm DxP raws tu qauv rau. Cov lus txib no yuav siv tau tsuas yog thaum nthuav hom yog ywj siab I/O.
Cov lus txib no tau teeb tsa DxP tus lej relay kom tswj tau los ntawm kev hloov pauv ntawm Exp1 lossis Exp2. Cov lus txib no yuav siv tau tsuas yog thaum nthuav hom yog ywj siab I/O.
Cov lus txib no tau teeb tsa DxP tus neeg siv lub npe. Cov lus txib no yuav siv tau tsuas yog thaum nthuav hom yog ywj siab I/O.
Cov lus txib no tau teeb tsa DxP hais kom ua tus password. Cov lus txib no yuav siv tau tsuas yog thaum nthuav hom yog ywj siab I/O.

no exp nr
Exp 1:2 Qhia 2:3

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 32

Cov lus txib Network
tau network
teeb ipmode teeb ipaddress teeb subnet teeb rooj vag set dns teeb http chaw nres nkoj <0-65535> teeb telnet chaw nres nkoj <0-65535> teeb lub plawv dhia chaw nres nkoj <0-65535> teeb dxp chaw nres nkoj <0-65535>
teeb dxp tswj teeb dxp lus nug teeb linkbackurl> teem sij hawm <0-999>

Tag nrho cov lus txib yuav tsum tau reboot ua ntej lawv pib siv. Cov lus txib no tsuas yog muaj rau tus thawj tswj hwm.

Cov lus txib no qhia tag nrho cov kev teeb tsa network raws li qhia hauv qab no:

Hom:

Static

IP chaw nyob:

192.168.1.190

Subnet:

255.255.255.0

Rooj vag:

192.168.1.1

DNS:

8.8.8.8

HTTP Chaw nres nkoj:

Linkback URL:

Telnet Chaw nres nkoj: 23

Lub plawv dhia chaw nres nkoj: 9100

DxP Chaw nres nkoj:

9100

DxP Control: Enabled

DxP lus nug:

Pab tau

Sijhawm:

Cov lus txib no tau teeb tsa tus IP chaw teeb tsa hom. Hom zoo li qub xauv qhov chaw nyob raws li teeb tsa, dhcp hom tso cai rau DHCP server los muab chaw nyob.

Cov lus txib no yog siv los teeb tsa iBoot-G2 tus IP chaw nyob.

dhcp 192.168.1.254 ib

Cov lus txib no yog siv los teeb tsa iBoot-G2's subnet mask.
Cov lus txib no yog siv los teeb tsa Gateway
Cov lus txib no yog siv los teeb tsa dns server
Cov lus txib no teev cov chaw nres nkoj uas iBoot-G2's web neeg rau zaub mov mloog rau kev sib txuas tuaj rau ntawm. Thaum teem rau 0 lub web server yog neeg xiam.
Cov lus txib no teev cov chaw nres nkoj uas iBoot-G2's Telnet server mloog rau kev sib txuas nkag. Thaum teem rau 0 Telnet server yog neeg xiam
Cov lus txib no teev qhov chaw nres nkoj rau lub plawv dhia raws tu qauv. Lub plawv dhia siv UDP thiab tuaj yeem ua tus lej chaw nres nkoj tib yam li DxP, uas siv TCP. Yog tias Lub Sijhawm server tau qhib chaw nres nkoj 9100 tsuas yog qhov chaw tso cai.
Cov lus txib no tau teeb tsa lub chaw nres nkoj uas iBoot-G2's DxP raws tu qauv kev pabcuam mloog rau kev sib txuas nkag. Thaum teem rau 0 Cov Kev Pabcuam Raws Cai raug kaw. Lus Cim: Yam tsawg kawg yog ib qho ntawm cov saum toj no YUAV TSUM tsis yog 0. CLI yuav tiv thaiv tag nrho 3 los ntawm kev teeb tsa rau 0.
Cov lus txib no tso cai rau cov chaw nres nkoj loj thiab nthuav dav tswj tau siv Dataprobe Exchange Protocol (DxP) cov lus txib.
Cov lus txib no tso cai rau cov xwm txheej ntawm cov chaw nres nkoj loj thiab nthuav dav kom raug nug siv DxP
Cov lus txib no teev cov linkback URL tso tawm rau ntawm nplooj ntawv tawm. (Tsis txhob ntxiv http:// rau lub url.)
Cov lus txib no teev lub sijhawm tsis siv neeg lub network hauv feeb.

255.255.255.0 192.168.1.1 8.8.8.8 80 23 9100 ib
9100
Xiam oob qhab xiam oob qhab
2

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 33

Autoping Commands

Cov lus txib no yuav tsum tau reboot ua ntej lawv yuav siv. Cov lus txib no muaj rau tus thawj tswj hwm nkaus xwb.

tau autoping
teeb autoping <1a | 1b | 2 | 3> chaw nyob

Cov lus txib no rov qab tag nrho cov teeb tsa AutoPing raws li qhia hauv qab no.

Autoping 1 A

Chaw nyob: iboot.co

Zaus: 10

Fail Count: 3

Logic:

Ib Xwb

Kev Ua:

Lub voj voog

Lub voj voog:

Tshaj tawm:

Main

Tos:

Rov pib dua:

xwm txheej:

Trig suav: 0

Autoping 2 Chaw Nyob: Zaus: Fail Count: Action: Cycle: Outlet: Tos: Restart: Status: Trig Count:

10 3 None 1 Exp1 2 0 OK 0

Autoping 3 Chaw Nyob: Zaus: Fail Count: Action: Cycle: Outlet: Tos: Restart: Status: Trig Count:

10 3 None 1 Exp1 2 0 OK 0

Cov lus txib no yog siv los teeb tsa qhov chaw nyob ntawm AutoPing. 0.0.0.0 Domain name lossis ipaddress.

teeb autoping <1a | 1b | 2 | 3> zaus <1-999>

Cov lus txib no yog siv los teeb tsa qhov zaus, hauv

vib nas this (feem ntau lub iBoot-G2+ xa cov ping) rau

txhua yam ntawm AutoPings.

teeb autoping <1a | 1b | 2 | 3> Failcount <1999>
teeb autoping 1 logic

Cov lus txib no yog siv los teeb tsa tus naj npawb ntawm kev ua tsis tiav sib law liag AutoPings yuav tsum kuaj ua ntej AutoPing txiav txim siab lub pinged ntaus ntawv ua tsis tiav.
Teem logic rau AutoPing 1. A = A nkaus xwb, thiab = A thiab B, lossis = A lossis B.

3 A thiab B

teeb autoping <1 | 2 | 3> qhov hluav taws xob

| exp2 >

ua rau.

Main

teeb autoping <1 | 2 | 3> kev ua

Cov lus txib no yog siv los teeb tsa qhov kev txiav txim uas iBootG2 + yuav ua thaum AutoPing tshwm sim.

Tsis muaj

teeb autoping <1 | 2 | 3> voj voog <0-999>

Cov lus txib no tau teeb tsa lub zog siab tshaj plaws

cycles thaum AutoPing ua rau. 0 = Unlimited

teeb autoping <1 | 2 | 3> tos <1-999> teeb autoping <1 | 2 | 3> rov pib dua <1-999>

Cov lus txib no teem sijhawm, hauv vib nas this rau lub cuab yeej 2 los teb rau ping.

Tom qab ib qho autoping tau tshwm sim, cov lus txib no

teem lub sij hawm, nyob rau hauv vib nas this ua ntej lub autoping yuav

rov pib dua. (ntxiv ncua tom qab lub voj voog tiav)

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 34

Heartbeat Commands

Cov lus txib no tsuas yog muaj rau tus thawj tswj hwm.

tau lub plawv dhia

Cov lus txib no qhia txog lub plawv dhia

teeb lub plawv dhia qhov chaw teeb lub plawv dhia chaw nres nkoj <1-65535>
teeb lub plawv dhia zaus <1-999>
teeb lub plawv dhia tsis ua haujlwm <1-999>
teeb lub plawv dhia ua haujlwm teeb lub plawv dhia voj voog <1-999> teeb lub plawv dhia qhov hluav taws xob

Source: Zaus: Fail Count: Action: Outlet:

Tsis muaj 10 3 Tsis muaj Main

Status Trigger Count

Cov lus txib no teev lub hauv paus rau lub plawv dhia. Yog USB los yog Network

Cov lus txib no teev qhov chaw nres nkoj rau lub plawv dhia raws tu qauv. Lub plawv dhia siv UDP thiab tuaj yeem ua tus lej chaw nres nkoj tib yam li DxP, uas siv TCP. Thaum Lub Sijhawm server qhib, chaw nres nkoj 9100 yog tib txoj kev xaiv, yog li cov lus txib no raug kaw.

Cov lus txib no yog siv los teeb tsa qhov zaus, hauv vib nas this. Ntau npaum li cas iBoot-G2+ cia siab tias lub plawv dhia

Qhov kev hais kom ua no yog siv los teeb tsa tus naj npawb ntawm qhov tsis ua haujlwm sib law liag lub plawv dhia yuav tsum kuaj ua ntej iBoot-G2+ txiav txim siab lub cuab yeej ua tsis tiav.

Cov lus txib no yog siv los teeb tsa qhov kev txiav txim uas iBootG2 + yuav ua thaum lub plawv dhia ntes ua rau.

Cov lus txib no tau teeb tsa lub zog ntau tshaj plaws thaum lub plawv dhia ua rau

Cov lus txib no teev lub qhov hluav taws xob uas lub plawv dhia yuav ua rau yuav tswj tau.

Tsis muaj 9100
10 None 3 Main

Cov lus txib

Cov lus txib no tsuas yog muaj rau tus thawj tswj hwm.

teeb tus neeg siv tus account

Cov lus txib no teeb tsa seb puas siv lossis tsis siv tus account. Yog tias tsis yog, tsuas yog tus thawj tswj hwm tus account ua haujlwm

teem tus ID nkag mus yuav tsum tau

Cov lus txib no teev seb puas yuav tsum tau nkag mus rau tus neeg siv qib kev ua haujlwm. Kev nkag mus yog ib txwm xav tau rau kev ua haujlwm ntawm admin. Yog tsis muaj ces Auto Login enabled.

Auto Login yuav tsis requie tej username los yog password rau cov neeg siv functions.

teeb tus password Cov lus txib no yog siv los teeb tsa tus password ntawm ob qho tib si

tus neeg siv lossis tus thawj tswj hwm.

tsis yog
tus neeg siv admin

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 35

Lub Sijhawm thiab Txheej Txheem Commands

Cov lus txib no tsuas yog muaj rau tus thawj tswj hwm.

tau sijhawm

Qhia lub sijhawm tam sim no thiab lub sijhawm server (thaum qhib)

teem sij hawm pab

Lub sij hawm tam sim no: 12/10/2015 16:10:41

Sijhawm:

-5

DST:

Pab tau

Pib hnub Sunday thib 2 ntawm lub Peb Hlis ntawm 2:00

Nres hnub Sunday thib 1 ntawm lub Peb Hlis thaum 2:00

Server:

nist.time.gov

Cov lus txib no ua rau lossis tsis siv lub sijhawm tsis muaj neeg rau zaub mov thiab cov xwm txheej tau teem tseg. Nco tseg: Thaum Ntxiv cov xwm txheej tshiab los ntawm CLI. Teem qhov no kom tsis txhob tiv thaiv kev hloov hluav taws xob tsis xav tau

teem sijhawm server

Cov lus txib no yog siv los teeb tsa Chaw Nyob ntawm lub sijhawm network server. Domain name los yog ipaddress

time.nist.gov

teem sij hawm zone <-12 12>

Qhov kev hais kom ua no teem sijhawm thaj tsam offset rau iBoot

-5

qhov chaw. (East ntug dej hiav txwv yog -5)

teem sij hawm dst pab

Cov lus txib no yuav pab kom muaj hnub ci txuag sij hawm

tsis muaj

teem sij hawm dst pib -

Cov lus txib no teem caij pib rau Hnub Teeb Txuag. Hnub Sunday thib ob ntawm lub Peb Hlis thaum 2:00 teev sawv ntxov yog qhov tsis raug

2/1/3-02:00

teem sij hawm dst nres -

Cov lus txib no teem sijhawm nres rau Hnub Teeb Txuag. Thawj hnub Sunday ntawm lub Kaum Ib Hlis thaum 2:00 teev sawv ntxov yog default

1/1/11-02:00

Rau lub hnub txuag nyiaj pib thiab nres cov lus txib saum toj no siv cov ntsiab lus hauv qab no: [lub lim tiam yog 1-5] [hnub yog 1 = Hnub Sunday; 2 = Monday; 3 = Tuesday; 4 = Wednesday; 5 = Thursday; 6 = Friday; 7 = Hnub Saturday] [ hli yog 1-12 ] [lub sij hawm yog HH:MM (siv hom 24 teev)]

tau cov xwm txheej
teeb qhov xwm txheej <1-14>
teem caij <1-14> hnub teem caij <1-14> sijhawm teeb qhov xwm txheej <1-14> rov ua < feeb | teev | hnub> teeb qhov xwm txheej <1-14> ntau <0-999> teeb meem <1-14> kev ua teeb qhov xwm txheej <1-14> qhov hluav taws xob del xwm <1-2>

Cov lus txib no qhia tag nrho 14 lub sijhawm teem tseg raws li qhia hauv qab no.

Example:

Hnub tim

Sijhawm rov ua dua

Action Outlet

1. 12/17/2015 16:30 every 2 Day(s) Off

Main

Khiav

2. 12/18/2015 04:00 every 1 Day(s) Cycle Exp1

Tuav

txhua 0 Hnub Rau

Main

Khiav

txhua 0 Hnub Rau

Main

Khiav

-clip-

13.

txhua 0 Hnub Rau

Main

Khiav

14.

txhua 0 Hnub Rau

Main

Khiav

Cov lus txib no yog siv rau txhua qhov kev tshwm sim los khiav, lossis muab qhov kev tshwm sim khiav tuav. Koj tuaj yeem tuav thaum lub programming los tiv thaiv kev sib tsoo.

Cov lus txib no yog siv los teeb tsa lub sijhawm teem sijhawm pib hnub.

Cov lus txib no yog siv los teem sijhawm lub sijhawm teem tseg yuav tshwm sim hauv 24 teev hom.

Cov lus txib no yog siv los teeb tsa qhov nce ntxiv rau kev rov ua cov haujlwm tau teem tseg

Qhov kev hais kom ua no teev ntau npaum li cas qhov xwm txheej yuav rov ua dua, (raws li teev saum toj no) ua ntej qhov kev tshwm sim tom ntej. 0 yuav lov tes taw rov ua dua.

Cov lus txib no yog siv los teeb tsa lub sijhawm ua haujlwm.

Cov lus txib no xaiv lub qhov hluav taws xob twg yuav tshwm sim

Cov lus txib no tshem tawm qhov kev txiav txim tau teem tseg.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 36

Kev ceeb toom
Tus neeg siv> Password> iBoot> iBoot Reboot Yuav tsum tau>

CLI yuav siv cov lus qhia hauv qab no:
Qhov no ua rau tus neeg siv nkag mus rau nws lub npe siv (tus neeg siv lossis admin).
Qhov no ua rau tus neeg siv nkag mus rau nws tus password.
Qhov no yog qhov kev ceeb toom uas yuav tshwm sim tom qab tus neeg siv tau ua tiav nkag rau hauv.
Qhov no yog qhov kev ceeb toom uas yuav tshwm sim thaum twg muaj kev hloov pauv uas yuav tsum tau rov pib dua. Qhov kev ceeb toom no yuav nyob twj ywm qhov kev ua haujlwm kom txog thaum iBoot-G2+ tau rov pib dua.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 37

9. DxP raws tu qauv
iBoot-G2+ txhawb nqa Dataprobe Txauv raws tu qauv (DxP) rau kev sib txuas lus ntawm cov cuab yeej thiab tso cai rau cov neeg tsim khoom siv cov khoom siv Dataprobe rau hauv cov ntawv thov kev cai. Siv DxP raws tu qauv, tus tsim tawm tuaj yeem:
Tig lub hwj chim rau lub Main thiab Expansion Outlets los yog External Outputs Pulse lub hwj chim rau los yog tawm mus rau tej qhov hluav taws xob, rau ib tug npaum li cas ntawm lub sij hawm Nyeem cov xwm txheej ntawm lub Main thiab Expansion Outlets los yog sab nraud inputs
DxP raws tu qauv, as well as example code thiab scripts hauv ntau hom lus muaj nyob ntawm http://dataprobe.com/support-iboot-g2-plus
10. Txhim kho firmware
Lub iBoot-G2+ tuaj yeem hloov kho dua tshiab. Nrhiav qhov tseeb version lossis lub hom phiaj tshwj xeeb ntawm http://dataprobe.com/support-iboot-g2-plus
Kev hloov kho lub firmware nrog kev hloov kho me me (piv txwv li 1.01.xx rau 1.01.yy) yuav tsis hloov cov neeg siv kev teeb tsa. Kev hloov kho loj tuaj yeem lossis tsis tuaj yeem rov pib dua iBoot-G2+ rau lub Hoobkas ua ntej. Txheeb xyuas cov ntawv tso tawm rau kev hloov kho ua ntej hloov pauv rau koj iBoot-G2+.
1) Xyuas kom paub tseeb tias qhov Kev Txhim Kho Kom Zoo Tshaj Plaws tau txheeb xyuas hauv Network Teeb web nplooj ntawv ntawm iBoot-G2+
2) Khiav lub Device Management Utility, muaj nyob rau ntawm qhov txuas saum toj no. Yog tias iBoot-G2+ koj xav hloov kho tsis pom nyob rau hauv lub thawv ntawv, ib yam nkaus
Xaiv Ntaus | Tshawb nrhiav los ntawm cov ntawv qhia zaub mov kom pom iBoot-G2+ units ntawm lub network hauv zos, lossis Xaiv Cov Ntaus | Ntxiv los ntawm cov ntawv qhia zaub mov ntxiv qhov chaw nyob IP ntawm iBoot-G2+.
Thaum lub cuab yeej tso tawm kom pom hauv daim ntawv teev npe, taw qhia nws
3) Xaiv Tswj | Txhim kho firmware
Nkag mus rau Tus Neeg Siv Lub Npe admin thiab tus password rau tus thawj tswj hwm.
Nkag mus rau filelub npe ntawm lub firmware, los yog nyem Xauj thiab nrhiav cov file ntawm lub firmware file siv tau. iBoot-G2+ firmware siv qhov txuas ntxiv .g2u Yog tias koj tsis pom muaj files ntawm hom ntawd, xyuas kom meej tias 'Files ntawm hom' lub thawv yog teem rau iBoot-G2 los yog Tag nrho Files.
Nyem OK thaum tag nrho cov ntsiab lus nkag.
4) Lub upload yuav pib, thiab ib qho kev nce qib yuav tshwm sim.
5) Thaum lub firmware upload tiav lawm, iBoot-G2+ yuav rov pib dua thiab npaj siv.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 38

11. Kev daws teeb meem

Lub iBoot-G2+ muaj lub pob nyem recessed nyob rau hauv qhov xwm txheej lub tsev tsis ua haujlwm raws li qhov xav tau. Siv lub laub khawm raws li hauv qab no:

Action Momentary
5 vib nas this thawb
Tuav lub sijhawm thiab lub zog rau iBoot

Kev tshwm sim
Soft Reset. Yuav tsis hloov qhov hluav taws xob raws li txoj cai.
Rov qab mus rau Factory Defaults. Tuav lub pob kom txog thaum lub qhov hluav taws xob LED ntsais, ces tso tawm.
Hom rov qab. Tso cai upload cov firmware tshiab rau qhov chaw nyob IP tam sim no. Yuav rov qab mus rau lub Hoobkas default IP Chaw Nyob 192.168.1.254 yog tias cov ntaub ntawv tau raug corrupted.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 39

12. Cov lus qhia tshwj xeeb

12.1. Lub cev
Qhov siab dav qhov tob

2.0 "60mm 3.2" 82mm 4.2" 107 hli

Qhov hnyav MTBF Kub

8.6 oz 244g 320,000 teev 0 50 ° C

12.2. AC
Lub tswv yim Input Cord Voltage Range Switched Receptacle Capacity

IEC 320 C14 16AWGX3C 10A 250 UL / CSA / VDE Rated (1.25mm2X3C) Nws pib Sensing 105-240 VAC IEC 320 C13 12 A Max ntawm 105-125 VAC, 10 A Max ntawm 210 VAC

12.3. Cov chaw nres nkoj nthuav dav

Hwj chim

V + Fais fab tuag

Tawm tswv yim

Kuv Input

Av Command

G av O tso zis

Qhov no yog +12 VDC lub zog tawm ntawm iBoot-G2 + Qhov siab tshaj plaws tam sim no 100 mA
Input rau cov xwm txheej teeb liab. Qhuav Tiv tauj tswv yim los yog Qhib Sau.
Teeb liab av rau cov tswv yim thiab tso zis
2N3904 NPN Transistor 100. XNUMX mA siab tshaj

12.4. Kev ua raws cai
CE / UL
FCC

UL60950 Daim ntawv teev npe ITE File Tsis yog E225914
Cov Lus Qhia 89/336/EEC, 92/31/EEC thiab 93/68/EEC EN 60950: 3rd Edition EN 55022: 1998 Class B
Tshooj 15 Chav B

12.5. Kev sib txuas lus
Dual 10/100 Unshielded Twisted Pair Ethernet Jacks. IP Chaw Nyob, DHCP muab lossis Static Internal HTTP Web Server Telnet Server USB: Com port 9600bps. 8 ib data. Tsis muaj parity. 1 Nres me ntsis. Tsis muaj Flow Control.

v210312 wb

iBoot-G2+ / iBoot-G2S

Page 40

13. Kev them nyiaj yug thiab Warranty
Tus neeg muag khoom lav cov khoom no, yog tias siv raws li tag nrho cov lus qhia siv, kom tsis txhob muaj qhov tsis xws luag hauv cov khoom thiab kev ua haujlwm rau lub sijhawm Peb Xyoo txij li hnub pib yuav khoom. Yog tias cov khoom yuav tsum ua pov thawj tsis raug nyob rau lub sijhawm ntawd, Tus Neeg Muag Khoom yuav kho lossis hloov cov khoom, ntawm nws qhov kev txiav txim siab ib leeg. Kev kho yuav raug ua nrog cov khoom tshiab lossis kho dua tshiab thiab kev hloov pauv yuav tshiab lossis kho dua tshiab ntawm Cov Neeg Muag Khoom tsuas yog kev txiav txim siab. Kho lossis hloov units yuav tsum tau lav rau qhov sib npaug ntawm qhov qub warranty, lossis 90 hnub, qhov twg ntau dua.
Yog Yuav los ntawm Dataprobe Inc.; Kev pabcuam raws li qhov Warranty no tau txais los ntawm kev xa khoom (nrog rau tag nrho cov nqi them ua ntej) mus rau qhov chaw nyob hauv qab no. Tus neeg muag khoom yuav them tus nqi xa rov qab hauv Tebchaws Meskas. Hu rau Dataprobe Technical Service kom tau txais Daim Ntawv Tso Cai Xa Khoom Rov Qab (RMA) Tus Naj Npawb ua ntej xa cov khoom siv rov qab los kho. suav nrog tag nrho cov cables, cov khoom siv fais fab, cov khoom siv thiab cov ntaub ntawv pov thawj ntawm kev yuav khoom nrog cov khoom xa tuaj.
Yog tias yuav los ntawm Kev Tso Cai Dataprobe Reseller; Kev pabcuam raws li qhov Warranty no tau txais los ntawm kev tiv tauj koj Tus Neeg Muag Khoom Tso Cai Dataprobe.
Qhov kev lav phib xaub no tsis siv rau kev hnav khaub ncaws ib txwm muaj lossis ua rau muaj kev puas tsuaj los ntawm kev sib tsoo, yuam kev, kev tsim txom lossis tsis saib xyuas. SELLER TSIS TXAUS SIAB TEEB MEEM LEEJ TWG THIAJ LI YUAV TSUM TAU TXAIS NTAWM NO. TAB SIS YUAV TSUM TAU TXAIS TXOJ CAI, TXHUA YAM YUAV TSUM PAUB TXOG, suav nrog txhua qhov kev lav phib xaub ntawm cov tub lag luam muaj peev xwm lossis kev tsim nyog rau txhua lub hom phiaj yog txwv rau lub sijhawm lav; Thiab qhov kev lav phib xaub no nthuav dav tsis suav nrog txhua yam kev puas tsuaj tshwm sim thiab tsim nyog.
Qee lub xeev tsis pub muaj kev txwv ntev npaum li cas qhov kev lees paub uas tau hais tseg yuav kav ntev npaum li cas, thiab qee lub xeev tsis tso cai rau kev cais lossis txwv tsis pub muaj kev puas tsuaj los yog tshwm sim, yog li cov kev txwv saum toj no lossis kev cais tawm yuav tsis siv rau koj. Qhov kev lees paub no muab cov cai tshwj xeeb rau koj, thiab koj tuaj yeem muaj lwm txoj cai uas txawv ntawm kev txiav txim mus rau kev txiav txim.
CEEB TOOM: Tus neeg siv yuav tsum tau saib xyuas los txiav txim siab ua ntej siv seb cov cuab yeej no puas tsim nyog, tsim nyog lossis muaj kev nyab xeeb rau kev siv. Txij li cov ntawv thov ib leeg raug hloov pauv ntau, cov chaw tsim khoom tsis muaj kev sawv cev lossis kev lees paub raws li qhov tsim nyog ntawm kev nyab xeeb rau txhua daim ntawv thov tshwj xeeb.
Dataprobe Inc. Kev them nyiaj yug: 201-934-5111 Ib support@dataprobe.com www.dataprobe.com/support.html

Cov ntaub ntawv / Cov ntaub ntawv

iBoot iBoot-G2+ Network Tswj fais fab hloov [ua pdf] Tus neeg siv phau ntawv
iBoot-G2, iBoot-G2S, iBoot-G2 Network Tswj fais fab hloov, Network tswj fais fab hloov, Tswj fais fab hloov, fais fab hloov

Cov ntaub ntawv

Cov neeg siv phau ntawv

iBoot-G2+ Network tswj fais fab hloov

Cov ntaub ntawv khoom

Specifications

Khoom siv

1. Kev teeb tsa kho vajtse

2. Kev teeb tsa thawj zaug

3. Web Kev ua haujlwm browser

4. iBoot Cloud Service

FAQ

Q: Kuv puas tuaj yeem siv iBoot-G2S sab nraum zoov lossis ze dej?

Q: Muaj pes tsawg lub sijhawm kuv tuaj yeem teem caij nrog lub hwj chim hloov?

Q: Kuv yuav ua li cas hloov kho firmware?

Q: Kuv puas tuaj yeem tswj lub hwj chim hloov siv kuv tus kheej kev cai
daim ntawv thov?

Q: Puas muaj kev txhawb nqa rau cov khoom?

Cov ntaub ntawv / Cov ntaub ntawv

Cov ntaub ntawv

Cia ib saib

Ncua tseg teb

iBoot-G2+ Network tswj fais fab hloov

Cov ntaub ntawv khoom

Specifications

Khoom siv

1. Kev teeb tsa kho vajtse

2. Kev teeb tsa thawj zaug

3. Web Kev ua haujlwm browser

4. iBoot Cloud Service

FAQ

Q: Kuv puas tuaj yeem siv iBoot-G2S sab nraum zoov lossis ze dej?

Q: Muaj pes tsawg lub sijhawm kuv tuaj yeem teem caij nrog lub hwj chim hloov?

Q: Kuv yuav ua li cas hloov kho firmware?

Q: Kuv puas tuaj yeem tswj lub hwj chim hloov siv kuv tus kheej kev cai daim ntawv thov?

Q: Puas muaj kev txhawb nqa rau cov khoom?

Cov ntaub ntawv / Cov ntaub ntawv

Cov ntaub ntawv

Related Posts

Cia ib saib

Ncua tseg teb

Q: Kuv puas tuaj yeem tswj lub hwj chim hloov siv kuv tus kheej kev cai
daim ntawv thov?