ROV: 20250317
TIAB SA #111631
EVO Tag Nrho Txhua Hauv Ib Cov Ntaub Ntawv Bypass thiab Interface Module
THAR-SUB4 THARNESS STAND ALONE INSTALLATION
ADDENDUM - SUGGESTED WIRING CONFIGURATION
Lub tsheb
Xyoo
2023-2024 : kuv
SUBARU
Ascent
Push-to-Start
Lub tsheb ua haujlwm txhawb nqa hauv daim duab no (ua haujlwm yog tias muaj)
- Immobilizer bypass
- Xauv
- Xauv
- Caj npab
- Tshem riam phom
- Lub cev (qhib)
- Chaw nres tsheb teeb
- Rooj zaum
AUX.1: - Tsheb Defrost
- RAP shutdown
- Tachometer
- Qhov rooj xwm txheej
- Lub cev Status
- Tes-Brake Status
- Foot-Brake Status
- Ruaj ntseg Take Over
CEEB TOOM MODULE yuav tsum tau:
QR CODE
ON THE LABEL MANUFACTURED AFTER: 2019
FIRMWARE VERSION
93 [01] ib. TSIS MUAJ
Txhawm rau ntxiv cov firmware version thiab cov kev xaiv, siv FLASH LINK UPDATER lossis FLASH LINK MOBILE cov cuab yeej, muag nyias.
Program bypass kev xaiv:
| UNIT OPTION | Kev piav qhia |
| C1 | OEM Tej thaj chaw deb xwm txheej (Xauv / Xauv) saib xyuas |
| D6 | Push-to-Start |
Yog tias lub tsheb tsis tau nruab nrog kev ua haujlwm HOOD PIN:
A11  |
Hood trigger (Output Status). |
Program bypass kev xaiv
(RAP shutdown):
| D5 | Xauv tom qab pib |
CEEB TOOM
MAKE SURE THE KEY IS NOT INSIDE THE CAR WHENREMOTE STARTING.
Qhov yuav tsum tau muaj (Tsis suav)
1 x RF KIT
TSEEM CEEB
HOOD STATUS: LUB HOOD PIN SWITCH yuav tsum tau teeb tsa yog tias lub tsheb tuaj yeem nyob deb tau pib nrog lub hood qhib, teeb tsa ua haujlwm A11 kom tawm.
A11
Daim ntawv ceeb toom: lub installation ntawm kev ruaj ntseg ntsiab yog yuav tsum tau. Lub hood pin yog ib qho tseem ceeb ntawm kev ruaj ntseg thiab yuav tsum tau nruab.
Cov qauv no yuav tsum tau teeb tsa los ntawm ib tus kws tshaj lij. Kev sib txuas tsis raug tuaj yeem ua rau muaj kev puas tsuaj tas mus li rau lub tsheb.
QHOV TSEEB (tsis suav nrog)
TSUM TSEEM CEEB
Program bypass kev xaiv nrog oem tej thaj chaw deb:
| UNIT OPTION | Kev piav qhia |
| C1 | OEM chaw taws teeb saib xyuas |
Program bypass kev xaiv nrog RF KIT kav hlau txais xov:
| UNIT OPTION | Kev piav qhia |
| H1 to H6 | Txhawb RF Cov Khoom Siv thiab xaiv cov khoom siv RF |
REMOTE PIB FUNCTIONNALITY
Lub 3x LOCK tej thaj chaw deb pib ua haujlwm nrog OEM chaw taws teeb tswj tsis pom zoo, lub tsheb qub chaw taws teeb tswj yuav tsis ua haujlwm thaum lub cav khiav.
RF KIT required (sold separately)
REMOTE STARTER DIAGNOSTICS
MODULE liab LED
x2 flash: Nres ON
x3 :no tach
x4 flash: Ignition ua ntej pib
x5 flash: Hood Open
REMOTE STARTER WARNING CARD
Txiav daim npav ceeb toom no thiab muab nws rau ntawm qhov chaw pom: lossis siv pob RSPB, Muag cais.
CEEB TOOM
REMOTE PUB
Lub tsheb tuaj yeem pib los ntawm ib qho: nias lub xauv khawm ntawm OEM chaw taws teeb 3 zaug sib law liag lossis los ntawm SMARTPHONE. TOM QAB SAIB XYUAS SAIB NTAWM LUB DASHBOARD ua ntej ua haujlwm ntawm lub tsheb.
AUTOMATIC TRANSMISSION WIRING CONNECTION
KEY BYPASS PROCEDURE 1/3
Khaws the other OEM remotes away from the vehicle. Minimum 3 meters (10 feet).
- Press and hold the programming button: the 4-Pin (Data-Link) connector. Insert
Cov Xiav, Liab, Daj thiab Xiav & Liab LEDs yuav hloov pauv.
- Tso lub programming khawm thaum lub LED yog BLUE.
Yog hais tias lub LED tsis muaj zog BLUE disconnect lub 4-Pin connector (Data-Link) thiab rov qab mus rau kauj ruam 1.
- Ntxig cov khoom txuas ntxiv uas yuav tsum tau ua.
- Tsis txhob nias lub nres pedal.
Nias lub khawm START/STOP ob zaug kom qhib qhov hluav taws xob.
- Nias thiab tso lub programming khawm ib zaug (1x).
- Nias lub pob START/STOP ib zaug kom tua lub ignition.
- Tshem lub roj teeb ntawm 1 OEM chaw taws teeb.
Khaws lwm cov chaw taws teeb OEM kom deb ntawm lub tsheb. Yam tsawg kawg 3 meters (10 ko taw).
- Muab cov chaw taws teeb OEM (tsis muaj roj teeb) ze rau pem hauv ntej ntawm START/STOP khawm raws li qhia.
- Nias lub footbrake pedal.
Tso lub pedal. - Nias lub pob START/STOP ib zaug kom tua lub ignition.
- Muab cov chaw taws teeb OEM (tsis muaj roj teeb) ze rau pem hauv ntej ntawm START/STOP khawm raws li qhia.
- Nias lub footbrake pedal.
The vehicle ignition will turn ON.
The YELLOW LED will turn ON.
The RED LED will turn OFF.
Tso lub pedal. - Nias lub pob START/STOP ib zaug kom tua lub ignition.
The RED and YELLOW LEDs will alternated.
- Disconnect tag nrho cov connectors thiab tom qab lub Data-Txuas (4-pins) connector.
- Siv lub cuab yeej:
FLASH LINK UPDATER lossis FLASH LINK MOBILE mus saib DCryptor zaub mov.
* Cov khoom yuav tsum tau (tsis suav nrog)
- Tom qab DCRYPTOR programming tiav
Rov qab mus rau lub tsheb thiab rov qab txuas 4-Pin (Data-Link) txuas thiab tom qab ntawd, tag nrho cov khoom txuas ntxiv.
Lub module yog tam sim no programmed.
REMOTE STARTER/ALARM VERIFICATION PROCEDURE
TXOJ CAI
The engine will shutdown when a door is opened if the vehicle is not Unlocked.
Module daim ntawv lo
Daim ntawv ceeb toom: Hloov kho Firmware thiab Installation Guides
Hloov kho firmware thiab cov lus qhia kev teeb tsa tau muab tso rau ntawm peb web qhov chaw tsis tu ncua. Peb pom zoo kom koj hloov kho qhov module no rau qhov tseeb firmware thiab rub tawm cov ntawv qhia kev teeb tsa tshiab kawg ua ntej kev teeb tsa ntawm cov khoom no.
CEEB TOOM
Cov ntaub ntawv ntawm daim ntawv no yog muab los ntawm (raws li yog) hauv paus uas tsis muaj kev sawv cev lossis kev lees paub ntawm qhov raug.
Nws yog lub luag haujlwm nkaus xwb ntawm tus installer los xyuas thiab txheeb xyuas txhua qhov Circuit Court ua ntej txuas mus rau nws. Tsuas yog lub khoos phis tawj muaj kev nyab xeeb logic sojntsuam lossis digital multimeter yuav tsum tau siv. FORTIN ELECTRONIC SYSTEMS xav tias tsis muaj kev lav phib xaub lossis lub luag haujlwm txhua yam uas cuam tshuam txog qhov raug lossis txiaj ntawm cov ntaub ntawv muab. Lub installation nyob rau hauv txhua rooj plaub yog lub luag hauj lwm ntawm tus installer ua hauj lwm thiab FORTIN ELECTRONIC SYSTEMS assumes tsis muaj kev lav phib xaub los yog lub luag hauj lwm dab tsi tshwm sim los ntawm txhua yam kev teeb tsa, txawm tias ua tau zoo, tsis raug lossis lwm txoj kev. Tsis yog cov chaw tsim khoom lossis tus neeg muag khoom ntawm cov qauv no tsis yog lub luag haujlwm ntawm kev puas tsuaj ntawm txhua yam tsis ncaj qha lossis ncaj qha los ntawm cov qauv no, tshwj tsis yog kev hloov pauv ntawm qhov module no thaum tsim khoom tsis raug. Qhov module no yuav tsum tau muab ntsia los ntawm tus kws tshaj lij. Cov ntaub ntawv muab yog ib phau ntawv qhia xwb. Phau ntawv qhia no yuav hloov tsis tau ceeb toom. Mus saib www.fortinbypass.com kom tau qhov tseeb version.
Cov lus qhia no tuaj yeem hloov pauv yam tsis tau ceeb toom. Saib www.fortin.ca rau qhov tseeb version.
TECH SUPPORT
Xovtooj: 514-255-HELP (4357)
1-877-336-7797 Ib
KEV PAB CUAM
www.fortinbypass.com
WEB Hloov tshiab
Cov ntaub ntawv / Cov ntaub ntawv
 |
FORTIN EVO Tag Nrho Txhua Hauv Ib Cov Ntaub Ntawv Bypass thiab Interface Module [ua pdf] Daim ntawv qhia kev teeb tsa THAR-SUB4, EVO-ALL, Subaru Ascent 2023, EVO Tag Nrho Txhua Hauv Ib Cov Ntaub Ntawv Bypass thiab Interface Module, EVO ALL, Txhua Hauv Ib Cov Ntaub Ntawv Bypass thiab Interface Module, ib Cov Ntaub Ntawv Bypass thiab Interface Module, Interface Module, Module |