Extron Occupancy Sensor OCS 100C

• OCS 100C yog ob lub thev naus laus zis nyob hauv sensor uas tuaj yeem siv los ua kom lub rooj sib tham thiab nthuav qhia qhov chaw thaum siv nrog Extron tswj cov khoom. Lub OCS tau nruab nrog ultrasonic (US), infrared (PIR), thiab photocell sensors uas tuaj yeem siv ua ke los qhia txog lub teeb pom kev zoo thiab chav nyob. Cov sensors tuaj yeem xa ncaj qha mus rau Extron cov khoom lag luam nruab nrog Digital I / Os cov chaw nres nkoj lossis ntawm eBUS, thaum siv cov khoom xaiv eBUS interface.
• OCS xav tau 24 VDC rau kev ua haujlwm. Yog tias lub zog 24 V hauv zos tsis muaj, siv qhov suav nrog 12 V rau 24 V, USB 5 V rau 24 V lub zog hloov pauv.
• CEEB TOOM: OCS 100C yog tsim los xyuas cov neeg nyob siv ob qho tib si PIR thiab US sensors nrog lawv cov kev teeb tsa ua ntej kom tsis txhob muaj qhov yuam kev.

Pem hauv ntej vaj huam sib luag nta thiab tswj

• Ultrasonic sensors (4) - Tshawb nrhiav kev txav mus los hauv chav, raws li cov suab nrov ultrasonic. Teb Chaws Asmeskas sensor emits ultrasonic suab nthwv dej rau hauv ib cheeb tsam thiab ntsuas qhov ceev ntawm lawv rov qab los kuaj pom cov neeg. Kev hloov pauv ntau zaus yog tshwm sim los ntawm kev txav ntawm tib neeg, uas tau kuaj pom los ntawm US nthwv dej.
• Ultrasonic (US) Ntsuab LED xwm txheej ntsuas (2) — Flash thaum lub ultrasonic sensors ntes neeg nyob.
• Infrared/Photocell (Fresnel) lens — Difracs lub teeb tawm thiab coj lub teeb mus rau lub sensor infrared.
• Ntiv nplhaib Retainer - Tuav lub ntsej muag IR xaiv nyob rau hauv qhov chaw. Tshem tawm kom nkag mus rau tag nrho cov tswj thiab DIP keyboards. Ntxig lub tiaj tus kawg ntawm ib tug me me ntswj ntsia hlau rau hauv lub notch nyob rau hauv lub retainer nplhaib kom lever nws nce thiab tawm.
• Infrared (PIR) Liab LED qhia txog xwm txheej — Nyob tom qab Fresnel lens, cov LEDs flash thaum lub infrared sensor pom muaj nyob.
• Infrared Sensor — Lub infrared (PIR) sensor kuaj pom cov neeg nyob ntawm qhov sib txawv ntawm cov cua sov tsim los ntawm kev txav tib neeg piv rau qhov chaw nyob hauv chav tsev kub.

DIP Hloov A

A	Hloov ua haujlwm	OFF	ON	Nco tseg
1	Tsis siv	* Tsis siv	Tsis siv	Lub tshuab hluav taws xob tsis siv.
2	Tus cwj pwm nrhiav neeg nyob - Dual technology	* Kev sib koom ua ke (xav tau ob qho tib si PIR thiab US raug kaw	Independent (los yog PIR or US nrhiav tau)	Yog tias A2 tau teeb tsa OFF, ob qho tib si PIR thiab US sensors yuav tsum tau ua (ib txhij) ua ntej OCS tshaj tawm cov teeb liab nyob. Yog tias A2 tau teeb tsa ON, OCS qhia txog kev nyob raws li ib qho ntawm cov sensors xwb ua rau. Thaum tsuas yog ib qho sensor xav tau, teeb A2 rau ON thiab kho cov dials kom haum. Yog A2 ON, nrhiav tsis tseeb thaum chav tsev tsis nyob nce.
3	Sensor xwm txheej ntsuas	* LEDs tau qhib	LEDs tsis ua haujlwm	Teem A3 rau OFF muab kev ceeb toom pom thaum twg PIR lossis US sensors tshwm sim. Thaum lub teeb pom kev pom LED yog qhov cuam tshuam los yog koj xav lov tes taw lub flashing LEDs, A3 yuav tsum tau teeb tsa. ON.
4	Hloov kho pib dua	* Khaws cov ntaub ntawv hloov kho sensor	Tshem tawm tag nrho cov kev kawm tau kawm (toggle ON, ces OFF)	Tsuas yog siv tau thaum Timer (B3) lossis Kev Hloov Siab (B4) lossis ob qho tib si raug teeb tsa rau Hom Tsis Siv Neeg (OFF). Toggling A4 ON ces OFF yuav rov pib dua ib qho kev hloov kho uas khaws cia.

Default thiab pom zoo nqis

DIP Hloov B

B	Hloov ua haujlwm	OFF	ON	Nco tseg
1	High Airflow compensator	* Ua tsis taus pa	Pab tau	Yog tias enabled ( teem rau ON) lub sensor yuav tsis pom me me hloov thiab txav. Qhov no tuaj yeem ua rau tsis pom kev, nrog rau qhov pib qis qis.
2	Qhov rooj mount	* Ua tsis taus pa	Pab tau
3	Timer kho	Tsis siv neeg	* Phau ntawv	Siv rau Timer (dub), Infrared rhiab heev (liab), thiab Ultrasonic rhiab heev (ntsuab) hloov dials. • Kev teeb tsa rau hom kev tuav cia tso cai rau kev kwv yees tus cwj pwm ntau dua thiab zoo dua rau kev siv AV automating. • Kev teeb tsa rau hom Tsis siv neeg tso cai rau lub sensor kom paub lub sijhawm zoo tshaj plaws timer thiab rhiab heev hloov kho rau qhov chaw thiab kev siv tiam sis. Qhov no yog qhov zoo dua rau kev siv lub teeb pom kev zoo. • Txhua qhov kev hloov kho dials raug kaw thaum teem rau Automatic (OFF).
4	rhiab heev kho	Tsis siv neeg	* Phau ntawv

Default thiab pom zoo nqis

• CEEB TOOM: B3 thiab B4 yuav tsum tau teem rau ON rau phau ntawv hom, thiaj li yuav kho lub timer, infrared rhiab heev, thiab US rhiab heev dials manually.
• Dub Timer Dial - Tus neeg nyob sensor muaj lub sijhawm ua haujlwm ua haujlwm. Siv lub timer dub dial los teeb lub sijhawm ua ntej lub sensor ua rau OFF. Lub Hoobkas pib teeb tsa yog 8 feeb.
• Timer range - 8 feeb mus rau 42 feeb.
• Full counterclockwise (CCW) = 8 feeb
• Tag nrho clockwise (CW) = 42 feeb

Kev ua haujlwm timer

• Thaum lub sensor pom kev txav, nws tam sim ntawd ua rau ON.
• Thaum nyob tsis pom lawm, lub timer pib. Yog tias tsis muaj kev txav mus los thiab lub sijhawm timer tas sij hawm, ces lub sensor ua rau OFF.
• CEEB TOOM: Yog tias nws siv sijhawm ntev dhau rau OCS kom tua thaum lub chav tsis nyob, kho lub sijhawm rau 8 feeb thiab txuas lub sijhawm ncua sijhawm los ntawm kev teeb tsa ntawm kev sib txuas tswj processor. Qhov kev teeb tsa no txo ​​qhov kev tshawb pom tsis tseeb.
• Test hom (8-second timer):

1. Qhib lub nplhaib retainer.
2. Tig lub timer dub rau ntawm ib nrab (50% lossis 12 teev).
3. Rov qab mus rau qhov chaw tsawg kawg nkaus (tag nrho CCW).
4. Lub timer yuav nyob twj ywm hauv 8-thib ob qhov kev sim rau 1 teev, tom qab ntawd rov pib dua rau 8 feeb.
5. Txhawm rau manually yuam lub timer tawm ntawm 8-thib ob qhov kev sim hom, tig lub sijhawm hloov pauv kwv yees li 1/16 nti clockwise. Qhov chaw yog me ntsis siab tshaj qhov tsawg kawg nkaus (tsuas yog saum toj no 8-feeb chaw).

• Liab Infrared Sensitivity Dial - Kho lub xov tooj no kom nce lossis txo qis infrared rhiab heev.
• Tig clockwise (CW) kom rhiab heev. Cov kev txav me me raug kuaj pom tias muaj nyob.
• Tig counterclockwise (CCW) kom txo rhiab heev. Cov kev txav tseem ceeb yog xav tau txhawm rau txheeb xyuas cov neeg nyob.
• Lub Hoobkas pib teeb tsa yog ntawm 75%.
• Ntsuab Ultrasonic Sensitivity Dial - Kho lub xov tooj no kom nce lossis txo qhov rhiab heev ntawm ultrasonic.
• Tig clockwise (CW) kom rhiab heev. Cov kev txav me me raug kuaj pom tias muaj nyob.
• Tig counterclockwise (CCW) kom txo rhiab heev. Cov kev txav tseem ceeb yog xav tau txhawm rau txheeb xyuas cov neeg nyob.
• Lub Hoobkas pib teeb tsa yog ntawm 50%.
• Blue Photocell Sensitivity Dial - Lub photocell tiv thaiv lub sensor los ntawm kev tshwm sim thaum thaj chaw muaj teeb txaus nrog lub teeb pom kev zoo thiab kuaj pom.
• Lub sensor yuav tsum tau mounted ncaj qha nyob rau hauv ib cheeb tsam uas yog sawv cev ntawm qhov nruab nrab, ntuj teeb pom kev zoo. Ua ntej teeb tsa lub photocell tswj, tos kom txog thaum lub teeb ntuj ci tshaj plaws (yeem).
• Kho lub xov tooj no kom nce lossis txo cov photocell rhiab heev.
• Tig counterclockwise kom txo cov photocell rhiab heev, ua rau nws qhib nrog lub teeb tsawg.
• Tig clockwise kom photocell rhiab heev, xav tau lub teeb ci dua los qhib lub sensor.
• Factory default yog 100% (tag nrho clockwise) - Photocell sensor yog neeg xiam.
• Ntau yam - 10-1000 LUX

Pom zoo teeb

• Nrog OCS nyob rau hauv lub neej ntawd los yog recom ngs (A2 OFF), OCS yuav tsum tau ob qho tib si IR sensor THIAB US sensor kom ntes neeg nyob kom tig ON. Tsuas yog nyob rau hauv peb lub tebchaws United States) yuav tsum tau ua kom rov pib dua lub sijhawm rau OCS kom nyob twj ywm ON thaum chav tsev tseem nyob.
• Thaum OCS nyob hauv lub xeev OFF, tsis pom muaj neeg nyob.
• Ua raws li cov kauj ruam no los teeb tsa OCS txhawm rau txheeb xyuas cov neeg nyob nrog qhov tsis tseeb tsawg:
• CEEB TOOM: Peb pom zoo kom siv OCS 100C hauv qhov chaw pib thaum pib teeb tsa lossis hom kev sim. Yog xav tau, kho me ntsis ntawm ib lub sij hawm los ntawm qhov teeb tsa rhiab heev.

1. Khaws tag nrho cov DIP keyboards thiab rotary dials nyob rau hauv lub neej ntawd txoj hauj lwm.
2. Teem OCS hauv Test Mode.
3. Nkag mus rau hauv chav ob peb zaug kom paub tseeb tias tus IR ntes ntes tau txav mus los (liab LEDs nyem).
   • Yog hais tias cov LEDs liab flash thaum nkag mus rau hauv chav tsev, lub default red infrared rhiab heev dial yog teem kom raug.
   • Tshawb xyuas cov LEDs liab nrog kev txav mus thoob hauv chav.
   • Tig lub xov tooj liab infrared rhiab heev kom txo qis lossis nce IR rhiab heev, kom txog thaum cov LEDs liab tsuas yog nyem thaum nkag mus hauv chav lossis ua kom txav mus thoob hauv chav.
   • Txhawm rau kom tsis txhob muaj kev kuaj pom tsis tseeb thaum chav tsis nyob, tsis txhob ua rau lub sensor rhiab heev.
4. Nkag mus rau hauv chav tsev thiab txheeb xyuas yog tias US lub tshuab kuaj pom kev txav mus los (ntsuab LEDs nyem).
   • Yog hais tias cov LEDs ntsuab flash thaum nkag mus rau hauv chav tsev, lub default ntsuab ultrasonic range dial yog teem kom raug. Qhov no sensor yog rhiab heev.
   • Txheeb xyuas cov LEDs ntsuab flash nrog txav mus thoob plaws hauv chav.
   • Tig lub ntsuab ultrasonic ntau dial kom txo los yog nce US rhiab heev, kom txog rau thaum lub ntsuab LEDs tsuas flash thaum nkag mus rau hauv chav tsev los yog ua kom txav thoob plaws hauv chav.
   • Txhawm rau kom tsis txhob muaj kev kuaj pom tsis tseeb thaum chav tsis nyob, tsis txhob ua rau lub sensor rhiab heev.
5. Tawm hauv chav thiab kaw qhov rooj. Tos kom txog thaum lub xeev cov zis Digital, relay lossis liab thiab ntsuab LEDs nyob OFF. Tos ob peb feeb kom ntseeg tau tias tsis muaj kev tshawb pom cuav.
   • Yog tias lub qhov rooj tseem qhib, US sensor tuaj yeem pom cov kev hloov pauv.
     Yog tias ua tau, tos ntev dua, kom paub meej tias tsis muaj IR lossis US hloov pauv tau sau npe.
6. Nkag mus rau hauv chav dua, kom paub meej tias Digital input state relay, thiab LEDs liab thiab ntsuab tig ON.

CEEB TOOM: Tom qab dhau los ntawm cov kauj ruam no thiab txheeb xyuas OCS tau teeb tsa kom haum rau chav, tsis txhob kho DIP keyboards lossis dials.
Tsis siv neeg hom
Tawm ntawm lub thawv, OCS 100C tuaj yeem teeb tsa hauv Hom Tsis Siv Neeg, qhov twg tsis muaj kev hloov pauv hloov pauv tau xav tau thiab kev kawm paub thiab kev hloov kho tau ua tiav. Rau kev teeb tsa yooj yim, peb pom zoo kom khaws OCS hauv qhov chaw pib thiab tig B4 Dip hloov mus rau OFF (Auto) txoj haujlwm. Lub OCS yog npaj rau mount.

Mask Patterns thiab Sensor Coverage
Ib lub npog ntsej muag infrared tuaj yeem xav tau kom ua tiav qhov kev xav tau kev pab cuam. Txhua qhov chaw npog ntsej muag yuav thaiv PIR sensor los ntawm kev ntes cov lus tsa suab hauv cheeb tsam ntawd.
CEEB TOOM: Mount lub OCS 6 mus rau 8 ko taw (1.8 mus rau 2.4 m) deb ntawm HVAC vents thiab cov cua ntws siab

CEEB TOOM: Qhov kev pab them nqi no tau ua tiav thaum OCS 100C tau teeb tsa 10 ko taw (3 m) saum toj ntawm thaj chaw them nyiaj.

Kev teeb tsa

• CEEB TOOM: * Tsuas yog siv lub npog ntsej muag yog tias PIR sensor xav tau los thaiv. Tsuas yog ib lub npog ntsej muag yuav tsum tau nruab rau txhua lub sijhawm.

CEEB TOOM:

• Tag nrho cov txheej txheem txheej txheem thiab kev teeb tsa hluav taws xob yuav tsum tau ua los ntawm cov neeg ua haujlwm tsim nyog raws li cov cai hauv zos thiab hauv lub tebchaws thiab cov lej hluav taws xob.
• Tsuas yog txuas rau Class III SELV systems.

Txoj Kev Txhim Kho 1

Txoj Kev Txhim Kho 2

PC 1224 Kev sib txuas

CEEB TOOM:

• Tsis txhob txuas lub zog rau lub cuab yeej kom txog thaum koj tau nyeem cov ntawv.
• CEEB TOOM: Daim ntawv ceeb toom ntawm nplooj ntawv tom ntej.
• Tshem tawm lub hwj chim ntawm lub system ua ntej ua kev sib txuas.
• Tus maub los thiab OCS 100C yuav tsum sib koom kev sib txuas hauv av kom tsis txhob muaj cov voj voog hauv av thiab qhov sib txawv ntawm qhov muaj peev xwm hauv av.
• OCS 100C xav tau 24 VDC rau lub zog. Yog tias lub ntsuas hluav taws xob txuas nrog lub cuab yeej tsis muab 24 VDC, siv qhov suav nrog

PC 1224 fais fab mov module:

1. Txuas lub zog 12 VDC mus rau 12 VDC cov tswv yim ntawm lub PC 1224 lub zog hloov pauv (saib daim duab 6), lossis lub zog ntawm USB hom-C 5 V input (saib daim duab 7).
2. Xaim PC 1224 24 VDC, 75 mA max connector rau cov xov hlau dub thiab liab ntawm OCS 100C.

• CEEB TOOM: Thaum lub PC 1224 tau siv los ntawm USB 5 V input, 24 V tso zis yog nyob ntawm 35 mA.
• A 12 VDC, 1.25 A max pass-dhau yog muaj rau lub hwj chim ntxiv 12 VDC li, tsuas yog powered los ntawm 12 V input.

OCS 100C Wiring Diagram

Hlau Xim	Kev sib txuas	Nco tseg
Hwj chim
Dub	Hauv av	Sib koom nrog tag nrho cov txiaj ntsig.
Liab	+ 24 VDC	Lub zog nkag.
Occupancy Control Outputs
Xiav	Muaj nyob tswj cov zis	Thaum xaim xiav xaim ntawm OCS rau Extron cov khoom lag luam nrog Digital lossis FLEX Input ports, teeb tsa cov chaw nres nkoj li Input yam tsis rub. Lub sensor muab kwv yees li 21 VDC hauv lub xeev ON thiab 0 VDC hauv lub xeev OFF. Siv cov xov hlau hauv av sib koom
Xiav / Dawb	Feem ntau	Relay hu tuaj yeem siv los ua rau cov khoom siv thib peb, xws li HVAC, raws li kev nyob.
Dub / Dawb	Nquag kaw thaum tsis muaj neeg nyob
Daj / Dawb	Nquag qhib thaum tsis muaj neeg nyob
Nyob thiab teeb pom kev zoo
Grey	Nyob thiab photocell tswj cov zis	Feem ntau siv rau kev siv teeb pom kev zoo. Thaum xaim cov xov hlau grey ntawm OCS rau Extron cov khoom lag luam nrog Digital lossis FLEX Input ports, teeb tsa cov chaw nres nkoj li Input yam tsis rub. Lub xeev cov zis yuav nyob twj ywm OFF 0 VDC thaum kuaj pom muaj neeg nyob tab sis muaj cov teeb pom kev zoo los yog ntuj nyob hauv chav. Tsuas yog thaum muaj qis lossis tsis muaj ambient lossis lub teeb ntuj nyob hauv chav thiab kuaj pom tus neeg nyob yuav ua rau lub xeev tso zis ON 21 VDC. Siv cov xov hlau hauv av sib koom.

Kev daws teeb meem

Teeb meem	Ua Tau	Kuaj	Kev daws
Sensor tseem ON.	Lub suab nrov tsis tu ncua.	Txo cov pob khawm ntsuab thiab liab los ntawm 1/8 (15%) tig los yog tshem tawm cov suab nrov.	Txav lub sensor mus rau qhov chaw tsis muaj suab nrov hauv chav.
Sensor tseem OFF	rhiab heev yog teem tsawg heev.	Nce ob lub pob ntsuab thiab liab los ntawm 1/8 (15%) tig.	Txav lub sensor. Yog tias A2 DIP hloov mus rau OFF, teeb ntsuab thiab liab pob qhov rooj mus rau qib qub.
Sensor tseem nyob ntev dhau lawm.	Lub sijhawm teem sijhawm siab dhau lawm.	Tshawb xyuas DIP hloov chaw.	Txo lub sijhawm teem sijhawm.
Hallway tsheb tig sensor rau.	Infrared sensor tuaj yeem pom hauv tsev.	Muab lub sensor tso rau hauv timer test hom thiab taug kev hauv tsev.	Tsiv sensor, yog li nws tsis tuaj yeem pom mus rau hauv txoj hauv kev lossis nruab IR qhov ncauj qhov ntswg.

Cov lus qhia kev nyab xeeb

Yog xav paub txog cov lus qhia txog kev nyab xeeb, kev ua raws cai, EMI / EMF kev sib raug zoo, kev nkag mus tau, thiab cov ncauj lus muaj feem xyuam, saib Extron Kev Nyab Xeeb thiab Kev Tswj Xyuas Kev Ua Raws Cai ntawm Extron webqhov chaw.

FCC

Daim Ntawv Ceeb Toom Qib A

Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class A cov cuab yeej digital, ua raws li ntu 15 ntawm FCC cov cai. Cov kev txwv Class A muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo thaum cov cuab yeej ua haujlwm hauv ib puag ncig kev lag luam. Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li phau ntawv qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Kev ua haujlwm ntawm cov khoom siv no hauv thaj chaw nyob yuav ua rau muaj kev cuam tshuam. Qhov kev cuam tshuam no yuav tsum raug kho ntawm tus neeg siv nyiaj.
CEEB TOOM: Yog xav paub ntxiv txog cov lus qhia txog kev nyab xeeb, kev ua raws cai, EMI / EMF kev sib raug zoo, kev nkag mus tau, thiab cov ncauj lus muaj feem xyuam, saib Extron Kev Nyab Xeeb thiab Kev Tswj Xyuas Kev Ua Raws Cai ntawm Extron webqhov chaw

Hwj chim saib xyuas

CEEB TOOM:

• Cov khoom no yog tsim los siv nrog UL Listed LPS hom fais fab.
• Kev siv cov khoom siv tsis yog LPS lossis cov khoom siv tsis tau teev npe yuav ua rau tag nrho cov ntawv pov thawj kev ua raws cai.
• Tshwj tsis yog hais tias lwm yam, AC / DC adapters tsis haum rau siv nyob rau hauv cov huab cua tuav qhov chaw los yog nyob rau hauv phab ntsa kab noj hniav. Lub zog hluav taws xob yuav tsum nyob rau hauv ib puag ncig ib puag ncig xws li Extron AV cov cuab yeej ua haujlwm nyob rau hauv ib qho chaw zoo tib yam, Pollution Degree 2, ruaj ntseg rau cov khoom khib nyiab nyob rau hauv lub txee dai khaub ncaws, podium, lossis rooj.
• Kev teeb tsa yuav tsum tau ua raws li cov kev cai ntawm National Electrical Code ANSI/NFPA 70, tsab xov xwm 725 thiab Canadian Electrical Code Part 1
• Lub hwj huam mov yuav tsum tsis txhob raug kho mus tas li rau lub tsev tsim lossis cov qauv zoo sib xws.
• Yog xav paub txog cov lus qhia txog kev nyab xeeb, kev ua raws cai, EMI/EMF compatibility, nkag mus tau, thiab lwm yam, saib cov
• Extron Kev Nyab Xeeb Kev Nyab Xeeb thiab Kev Tswj Xyuas Kev Ua Raws Cai Qhia ntawm Extron webqhov chaw.
• © 2017-2022 Extron Txhua txoj cai. www.extron.com
• Tag nrho cov cim lag luam hais txog yog cov cuab yeej ntawm lawv cov tswv.
• Lub hauv paus loj thoob ntiaj teb: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

Cov ntaub ntawv / Cov ntaub ntawv

Extron Occupancy Sensor OCS 100C [ua pdf] Cov neeg siv phau ntawv qhia 68-3155-51_G, Occupancy Sensor OCS 100C, Neeg nyob Sensor, OCS 100C Sensor, 100C Sensor, Sensor

Cov ntaub ntawv

• Cov neeg siv phau ntawv