EMKO PROOP Input lossis Output Module
Ua ntej
Proop-I / O Module yog siv nrog Prop ntaus ntawv. Nws kuj tseem siv tau los ua cov ntaub ntawv taug kev rau txhua hom. Cov ntaub ntawv no yuav pab tau tus neeg siv rau nruab thiab txuas Proop-I/O Module.
- Ua ntej pib lub installation ntawm cov khoom no, thov nyeem phau ntawv qhia.
- Cov ntsiab lus ntawm cov ntaub ntawv tuaj yeem hloov kho. Koj tuaj yeem nkag mus rau qhov hloov tshiab tshaj plaws ntawm www.emkoelektronik.com.tr
- Cov cim no yog siv rau kev ceeb toom kev nyab xeeb. Cov neeg siv yuav tsum tau ua tib zoo mloog cov lus ceeb toom no.
Ib puag ncig tej yam kev mob
| Ua haujlwm kub: | 0-50 C |
| Maximum Humidity: | 0-90% RH (tsis muaj condensing) |
| Qhov hnyav: | 238g ua |
| Dimension: | 160 x 90 x 35 mm |
Nta
Proop-I / O modules tau muab faib ua ntau hom raws li cov khoom siv-tso tawm. Cov hom yog raws li nram no.
| Yam khoom
Proop-I/OP |
A |
. |
B |
. |
C |
. |
D |
. |
E |
. |
F |
| 2 | 2 | 1 | 3 | ||||||||
| Module Supply | |||||||||||
| 24 Vdc / Vac (Kev rho tawm) | 2 | |||
| Kev sib txuas lus | ||||
| RS-485 (Kev cais tawm) | 2 | |||
| Digital Inputs | ||||
| 8 x Digital | 1 | |||
| Digital Outputs | ||||
| 8 x 1A Transistor (+V) | 3 | |||
| Cov Lus Qhia Kev Pom Khoom | ||||
| 5 x Pt-100 (-200…650 ° C)
5x 0/4..20mAdc 5x 0…10Vdc 5 x 0mv |
1 | ||
| 2 | |||
| 3 | |||
| 4 | |||
| Analog Outputs | |||
| 2 x 0/4… 20 mAdc
2 x 0 Vdc |
1 | ||
| 2 | |||
Qhov ntev
Mounting ntawm Module ntawm Proop Device
 |
1- Ntxig Prop I/O Module rau hauv lub qhov ntawm Prop ntaus ntawv raws li hauv daim duab.
2- Txheeb xyuas cov khoom xauv yog ntsaws rau hauv Proop-I / O Module ntaus ntawv thiab rub tawm. |
 |
3- Nias lub Proop-I / O Module ntaus ntawv khov kho nyob rau hauv cov lus qhia.
4- Ntxig qhov ntsuas phoo los ntawm kev thawb rau hauv. |
 |
5- Cov duab ntxig ntawm cov khoom siv module yuav tsum zoo li ib qho ntawm sab laug. |
Mounting ntawm Module ntawm DIN-Ray
 |
1- Luag lub Proop-I/O Module ntaus ntawv mus rau DIN-duab tshav raws li qhia.
2- Txheeb xyuas cov khoom xauv yog ntsaws rau hauv Prop- I / O Module ntaus ntawv thiab rub tawm. |
 |
3- Ntxig qhov ntsuas phoo los ntawm kev thawb rau hauv. |
 |
4- Cov duab ntxig ntawm cov khoom siv module yuav tsum zoo li ib qho ntawm sab laug. |
Kev teeb tsa
- Ua ntej pib installation ntawm cov khoom no, thov nyeem phau ntawv qhia thiab cov lus ceeb toom hauv qab no kom zoo zoo.
- Kev soj ntsuam pom ntawm cov khoom no rau kev puas tsuaj tshwm sim thaum lub sij hawm xa khoom yog pom zoo ua ntej kev teeb tsa. Nws yog koj lub luag haujlwm los xyuas kom meej tias cov kws kho tshuab thiab hluav taws xob tsim nyog tau teeb tsa cov khoom no.
- Tsis txhob siv lub tsev nyob rau hauv combustible los yog explosive gaseous atmospheres.
- Tsis txhob tso lub tsev mus rau lub hnub ci ncaj qha lossis lwm qhov chaw tshav kub.
- Tsis txhob tso lub tsev nyob hauv ib cheeb tsam ntawm cov khoom siv sib nqus xws li transformers, motors lossis cov khoom siv uas tsim kev cuam tshuam (vuam tshuab, thiab lwm yam).
- Txhawm rau txo qhov cuam tshuam ntawm hluav taws xob nrov ntawm lub cuab yeej, Low voltage kab (tshwj xeeb tshaj yog sensor input cable) thaiv yuav tsum tau sib cais los ntawm high tam sim no thiab voltage kab.
- Thaum lub sij hawm installation ntawm cov khoom siv nyob rau hauv lub vaj huam sib luag, cov npoo ntse ntawm cov hlau yuav ua rau muaj kev txiav ntawm tes, thov siv ceev faj.
- Mounting ntawm cov khoom yuav tsum tau ua nrog nws tus kheej mounting clamps.
- Tsis txhob mount lub cuab yeej nrog tsis tsim nyog clamps. Tsis txhob tso lub cuab yeej thaum lub sijhawm teeb tsa.
- Yog tias ua tau, siv cov kab thaiv kev tiv thaiv. Txhawm rau tiv thaiv av loops lub thaiv yuav tsum tau grounded ntawm ib kawg nkaus xwb.
- Txhawm rau tiv thaiv hluav taws xob los yog kev puas tsuaj rau lub cuab yeej, tsis txhob siv lub zog rau lub cuab yeej kom txog thaum tag nrho cov xaim xaim tiav.
- Cov txiaj ntsig digital thiab cov khoom siv sib txuas yog tsim los sib cais los ntawm ib leeg.
- Ua ntej commissioning lub cuab yeej, tsis yuav tsum tau teem nyob rau hauv raws li xav siv.
- Kev teeb tsa tsis tiav lossis tsis raug tuaj yeem ua rau muaj kev phom sij.
- Chav tsev yog ib txwm muab tsis muaj lub hwj chim hloov, fuse, lossis Circuit Court breaker. Siv lub zog hloov hluav taws xob, fuse, thiab hluav taws xob hluav taws xob raws li kev cai hauv zos.
- Thov tsuas yog qhov ntsuas fais fab mov voltage mus rau chav tsev, tiv thaiv cov khoom puas.
- Yog tias muaj kev phom sij txaus ntshai uas tshwm sim los ntawm qhov tsis ua haujlwm lossis kev ua haujlwm tsis zoo hauv chav tsev no, tshem tawm lub kaw lus thiab txiav lub cuab yeej los ntawm qhov system.
- Tsis txhob sim disassemble, hloov kho lossis kho chav tsev no. TampKev sib txuas nrog lub tsev yuav ua rau muaj kev ua haujlwm tsis zoo, hluav taws xob poob siab, lossis hluav taws kub.
- Thov hu rau peb nrog cov lus nug ntsig txog kev ua haujlwm nyab xeeb ntawm chav tsev no.
- Cov cuab yeej no yuav tsum tau siv raws li tau teev tseg hauv phau ntawv qhia no.
Kev sib txuas
Fais fab mov
 |
Terminal |
| + | |
|
- |
Kev sib txuas lus txuas nrog HMI Device
 |
Terminal |
| A | |
| B | |
| GND |
Digital Inputs
|
|
Terminal | Saib | Kev sib txuas Sheme |
| DI 8 |
Digital Inputs |
 |
|
| DI 7 | |||
| DI 6 | |||
| DI 5 | |||
| DI 4 | |||
| DI 3 | |||
| DI 2 | |||
| DI 1 | |||
|
+/- |
NPE / PNP
Kev xaiv cov khoom siv digital |
Digital Outputs
|
|
Terminal | Saib | Kev sib txuas lus |
| Ua 1 |
Digital Outputs |
 |
|
| Ua 2 | |||
| Ua 3 | |||
| Ua 4 | |||
| Ua 5 | |||
| Ua 6 | |||
| Ua 7 | |||
| Ua 8 |
Cov Lus Qhia Kev Pom Khoom
|
Terminal | Saib | Kev sib txuas lus |
| AI 5- |
Analog tswv yim 5 |
 |
|
| AI 5+ | |||
| AI 4- |
Analog tswv yim 4 |
||
| AI 4+ | |||
| AI 3- |
Analog tswv yim 3 |
||
| AI 3+ | |||
| AI 2- |
Analog tswv yim 2 |
||
| AI 2+ | |||
| AI 1- |
Analog tswv yim 1 |
||
| AI 1+ |
Analog Outputs
|
|
Terminal | Saib | Kev sib txuas lus |
|
AO + |
Analog Output Supply |
 |
|
|
AW- |
|||
|
TIAB SA 1 |
Analog Outputs |
||
|
TIAB SA 2 |
Technical nta
Fais fab mov
| Fais fab mov | : | 24 VDC ua |
| Permissible Range | : | 20.4-27.6 VDC |
| Kev siv fais fab | : | 3W |
Digital Inputs
| Digital Inputs | : | 8 Cov tswv yim | |
| Nominal Tswv Yim Voltage | : | 24 VDC | |
|
Cov lus qhia Voltage |
: |
Rau Logic 0 | Rau Logic 1 |
| <5 VDC | > 10 VDC | ||
| Input Tam sim no | : | 6mA qhov kawg. | |
| Input Impedance | : | 5.9 k k o ua | |
| Teb Sijhawm | : | '0' rau '1' 50ms | |
| Galvanic cais | : | 500 VAC rau 1 feeb | |
High Speed Counter Inputs
| HSC Inputs | : | 2 Input (HSC1: DI1 thiab DI2, HSC2: DI3 thiab DI4) | |
| Nominal Tswv Yim Voltage | : | 24 VDC | |
|
Cov lus qhia Voltage |
: |
Rau Logic 0 | Rau Logic 1 |
| <10 VDC | > 20 VDC | ||
| Input Tam sim no | : | 6mA qhov kawg. | |
| Input Impedance | : | 5.6 k k o ua | |
| Ntau zaus | : | 15KHz max. rau ib theem 10KHz max. rau ob theem | |
| Galvanic cais | : | 500 VAC rau 1 feeb | |
Digital Outputs
| Digital Outputs | 8 Tso Tawm | |
| Outputs Tam sim no | : | 1 A max. (Tag nrho tam sim no 8 A max.) |
| Galvanic cais | : | 500 VAC rau 1 feeb |
| Kev tiv thaiv luv luv | : | Yog lawm |
Cov Lus Qhia Kev Pom Khoom
| Cov Lus Qhia Kev Pom Khoom | : | 5 Cov tswv yim | |||
|
Input Impedance |
: |
PT- Kev100 | 0/4-20 mA | 0-10V | 0-50mV |
| - 200 NwsoC-650oC | 100 Ω | > 6.6kΩ | > 10MΩ | ||
| Galvanic cais | : | Tsis muaj | |||
| Kev daws teeb meem | : | 14 Bits | |||
| Qhov tseeb | : | ± 0,25% | |||
| SampLub sijhawm | : | 250ms ib | |||
| Qhov taw qhia xwm txheej | : | Yog lawm | |||
Analog Outputs
|
Analog tso zis |
: |
2 Tso Tawm | |
| 0/4-20mA | 0-10V | ||
| Galvanic cais | : | Tsis muaj | |
| Kev daws teeb meem | : | 12 Bits | |
| Qhov tseeb | : | 1% ntawm tag nrho cov nplai | |
Internal Address Definitions
Kev sib txuas lus chaw:
| Tsis muaj | Chaw nyob | Kev xaiv | Default |
| ID | 40001 | 1–255 : kuv | 1 |
| KOOS LOOS | 40002 | 0- 1200 / 1- 2400 / 2- 4000 / 3- 9600 / 4- 19200 / 5- 38400 /
6-57600 /7-115200 |
6 |
| STOP BIT | 40003 | 0-1Bit / 1-2Bit | 0 |
| PARITY | 40004 | 0- Tsis muaj / 1- Txawm / 2- Khib | 0 |
Ntaus chaw nyob:
| Nco | Hom ntawv | Arange | Chaw nyob | Hom |
| Cov tswv yim digital | DIN | n:0 :7 | 10001–10008 : kuv | Nyeem |
| Tsim Tawm Digital | DON | n:0 :7 | 1–8 : kuv | Nyeem-Sau |
| Cov Lus Qhia Kev Koom Tes | AIN | n:0 :7 | 30004–30008 : kuv | Nyeem |
| Analog tso zis | AON | n:0 :1 | 40010–40011 : kuv | Nyeem-Sau |
| Version* | (aabbbbbcccccc)me ntsis | n:0, XNUMX | 30001 | Nyeem |
- Nco tseg:Cov khoom hauv qhov chaw nyob no yog qhov loj, b cov khoom me me yog tus lej version, c cov khoom qhia hom ntaus ntawv.
- Example: Tus nqi nyeem los ntawm 30001 (0x2121)hex = (0010000100100001)bit ,
- a bits (001) ntsis = 1 (tus lej version loj)
- b bits (00001) ntsis = 1 (Me me version naj npawb)
- c bits (00100001) ntsis = 33 (Cov ntaus ntawv hom yog qhia nyob rau hauv lub rooj.) ntaus ntawv version = V1.1
- Ntaus hom = 0-10V Analog Input 0-10V Analog Output
Ntaus hom:
| Ntaus hom | Tus nqi |
| PT100 Analog Input 4-20mA Analog Output | 0 |
| PT100 Analog tswv yim 0-10V Analog Output | 1 |
| 4-20mA Analog Input 4-20mA Analog Output | 16 |
| 4-20mA Analog Input 0-10V Analog Output | 17 |
| 0-10V Analog Input 4-20mA Analog Output | 32 |
| 0-10V Analog Input 0-10V Analog Output | 33 |
| 0-50mV Analog Input 4-20mA Analog Output | 48 |
| 0-50mV Analog Input 0-10V Analog Output | 49 |
Kev hloov dua siab tshiab ntawm qhov tseem ceeb nyeem los ntawm lub module raws li analog input hom yog piav nyob rau hauv cov lus hauv qab no:
| Cov Lus Qhia Kev Koom Tes | Tus nqi Range | Kev hloov dua siab tshiab Qhov xwm txheej | Example ntawm tus nqi qhia hauv PROOP |
|
PT- Kev100 -200 ° - 650° Nws |
-2000-6500 Nws |
x10 ua-1 |
Example-1: Tus nqi nyeem raws li 100 yog hloov mus rau 10oC. |
| Example-2: Tus nqi nyeem raws li 203 yog hloov mus rau 20.3oC. | |||
| 0 - 10v XNUMX | 0–20000 : kuv | 0.5 × 10 hli-3 | Example-1: Tus nqi nyeem raws li 2500 hloov mus rau 1.25V. |
| 0 - 50mV | 0–20000 : kuv | 2.5 × 10 hli-3 | Example-1: Tus nqi nyeem raws li 3000 hloov mus rau 7.25mV. |
|
0/4 - 20 mA |
0–20000 : kuv |
0.1 × 10 hli-3 |
Example-1: Tus nqi nyeem raws li 3500 hloov mus rau 7mA. |
| Example-2: Tus nqi nyeem raws li 1000 hloov mus rau 1mA. |
Kev hloov dua siab tshiab ntawm qhov tseem ceeb sau ntawm lub module raws li hom analog tso zis tau piav qhia hauv cov lus hauv qab no:
| Analog tso zis | Tus nqi Range | Kev hloov dua siab tshiab Tus nqi | Example ntawm Tus Nqi Sau rau hauv Modules |
| 0 - 10v XNUMX | 0–10000 : kuv | x10 ua3 | Example-1: Tus nqi yuav tsum tau sau ua 1.25V yog hloov mus rau 1250. |
| 0/4 - 20 mA | 0–20000 : kuv | x10 ua3 | Example-1: Tus nqi yuav tsum tau sau ua 1.25mA hloov mus rau 1250. |
Analog Input-Specific Chaw Nyob:
| Parameter | AWM 1 | AWM 2 | AWM 3 | AWM 4 | AWM 5 | Default |
| Kev teeb tsa Cov khoom | 40123 | 40133 | 40143 | 40153 | 40163 | 0 |
| Yam tsawg kawg nkaus tus nqi | 40124 | 40134 | 40144 | 40154 | 40164 | 0 |
| Tus nqi siab tshaj plaws | 40125 | 40135 | 40145 | 40155 | 40165 | 0 |
| Scaled tus nqi | 30064 | 30070 | 30076 | 30082 | 30088 | - |
Analog Input Configuration Bits:
| AWM 1 | AWM 2 | AWM 3 | AWM 4 | AWM 5 | Kev piav qhia |
| 40123.0me ntsis | 40133.0me ntsis | 40143.0me ntsis | 40153.0me ntsis | 40163.0me ntsis | 4-20mA / 2-10V Xaiv:
0 - 0 mA / 20-0 V 1 - 4 mA / 20-2 V |
Tus nqi Scaled rau analog inputs yog xam raws li lub xeev ntawm 4-20mA / 2-10V Xaiv configuration ntsis.
Analog Output Tshwj Xeeb Chaw Nyob:
| Parameter | TIAB SA 1 | TIAB SA 2 | Default |
| Yam tsawg kawg nkaus tus nqi rau cov tswv yim | 40173 | 40183 | 0 |
| Maximum Scale tus nqi rau kev nkag | 40174 | 40184 | 20000 |
| Yam tsawg kawg nkaus tus nqi rau cov zis | 40175 | 40185 | 0 |
| Maximum Scale tus nqi rau cov zis | 40176 | 40186 | 10000/20000 |
| Analog tso zis muaj nuj nqi
0: Kev siv phau ntawv 1: Siv qhov ntsuas qhov tseem ceeb saum toj no, nws cuam tshuam cov tswv yim rau cov zis. 2: Nws tsav cov analog tso zis raws li PID tso zis, siv qhov tsawg kawg nkaus thiab siab tshaj qhov ntsuas tsis tau rau cov zis. |
40177 | 40187 | 0 |
- Nyob rau hauv rooj plaub tus analog tso zis muaj nuj nqi parameter yog teem rau 1 los yog 2;
- AI1 yog siv los ua cov tswv yim rau A01 cov zis.
- AI2 yog siv los ua cov tswv yim rau A02 cov zis.
- Tsis yog: Mirroring input to output feature (Analoque Output Function = 1) siv tsis tau rau hauv modules nrog PT100 inputs.
HSC (High-Speed Counter) Chaw
Tib Phase Counter Connection
- High-speed counters suav cov xwm txheej ceev uas tsis tuaj yeem tswj tau ntawm PROOP-IO scan nqi. Qhov siab tshaj plaws suav zaus ntawm lub txee siab ceev yog 10kHz rau Encoder inputs thiab 15kHz rau counter inputs.
- Muaj tsib yam yooj yim ntawm cov txee: ib-theem txee nrog cov kev taw qhia sab hauv, ib-theem txee nrog sab nraud tswj, ob-theem txee nrog 2 moos inputs, A / B theem quadrature txee, thiab zaus ntsuas hom.
- Nco tseg tias txhua hom tsis tau txais kev txhawb nqa los ntawm txhua lub txee. Koj tuaj yeem siv txhua hom tshwj tsis yog hom ntsuas zaus: yam tsis muaj rov pib dua lossis pib nkag, nrog rov pib dua thiab tsis pib, lossis nrog ob qho tib si pib thiab rov pib nkag.
- Thaum koj qhib qhov rov pib dua cov tswv yim, nws tshem tawm tus nqi tam sim no thiab tuav nws meej kom txog thaum koj deactivate rov pib dua.
- Thaum koj qhib qhov pib nkag, nws tso cai rau lub txee suav. Thaum pib yog deactivated, tam sim no tus nqi ntawm lub txee yog nyob tas li thiab clocking txheej xwm tsis quav ntsej.
- Yog tias rov pib dua yog qhib thaum pib tsis ua haujlwm, qhov rov pib dua yog tsis quav ntsej thiab tus nqi tam sim no tsis hloov. Yog hais tias qhov pib input ua active thaum lub reset input yog active, tam sim no tus nqi yog cleared.
| Tsis muaj | Chaw nyob | Default |
| HSC1 Configuration thiab Hom Xaiv * | 40012 | 0 |
| HSC2 Configuration thiab Hom Xaiv * | 40013 | 0 |
| HSC1 Tus nqi tam sim no tshiab (tsawg kawg 16 byte) | 40014 | 0 |
| HSC1 Tus Nqi Tam Sim No Tshiab (Qhov Tseem Ceeb Tshaj 16 byte) | 40015 | 0 |
| HSC2 Tus nqi tam sim no tshiab (tsawg kawg 16 byte) | 40016 | 0 |
| HSC2 Tus Nqi Tam Sim No Tshiab (Qhov Tseem Ceeb Tshaj 16 byte) | 40017 | 0 |
| HSC1 Tus nqi tam sim no (tsawg kawg 16 byte) | 30010 | 0 |
| HSC1 Tus nqi tam sim no (Qhov tseem ceeb tshaj 16 byte) | 30011 | 0 |
| HSC2 Tus nqi tam sim no (tsawg kawg 16 byte) | 30012 | 0 |
| HSC2 Tus nqi tam sim no (Qhov tseem ceeb tshaj 16 byte) | 30013 | 0 |
Nco tseg: Qhov no parameter;
- Qhov tsawg kawg nkaus byte yog hom parameter.
- Qhov tseem ceeb tshaj byte yog Configuration parameter.
HSC Configuration Description:
| NTS1 | NTS2 | Kev piav qhia |
| 40012.8me ntsis | 40013.8me ntsis | Active theem tswj me ntsis rau Reset:
0 = Rov pib dua yog qis qis 1 = Rov pib dua yog ua haujlwm siab |
| 40012.9me ntsis | 40013.9me ntsis | Active theem tswj me ntsis rau Start:
0 = Pib yog nquag qis 1 = Pib yog nquag siab |
| 40012.10me ntsis | 40013.10me ntsis | Suav cov kev taw qhia tswj me ntsis:
0 = suav 1 = suav |
| 40012.11me ntsis | 40013.11me ntsis | Sau tus nqi tam sim no rau HSC:
0 = Tsis hloov tshiab 1 = Hloov tshiab tus nqi tam sim no |
| 40012.12me ntsis | 40013.12me ntsis | Qhib HSC:
0 = Disable HSC 1 = Pab kom HSC |
| 40012.13me ntsis | 40013.13me ntsis | Khaws cia |
| 40012.14me ntsis | 40013.14me ntsis | Khaws cia |
| 40012.15me ntsis | 40013.15me ntsis | Khaws cia |
HSC Hom:
| Hom | Kev piav qhia | Cov tswv yim | |||
| NTS1 | DI 1 | DI 2 | DI 5 | DI 6 | |
| NTS2 | DI 3 | DI 4 | DI 7 | DI 8 | |
| 0 | Tib Phase Counter nrog Internal Direction | moos | |||
| 1 | moos | Rov pib dua | |||
| 2 | moos | Rov pib dua | Pib | ||
| 3 | Tib Phase Counter nrog Sab Nraud Direction | moos | Kev taw qhia | ||
| 4 | moos | Kev taw qhia | Rov pib dua | ||
| 5 | moos | Kev taw qhia | Rov pib dua | Pib | |
| 6 | Ob Phase Counter nrog 2 Clock Input | Lub moos | Moog | ||
| 7 | Lub moos | Moog | Rov pib dua | ||
| 8 | Lub moos | Moog | Rov pib dua | Pib | |
| 9 | A/B Phase Encoder Counter | moos A | moos B | ||
| 10 | moos A | moos B | Rov pib dua | ||
| 11 | moos A | moos B | Rov pib dua | Pib | |
| 12 | Khaws cia | ||||
| 13 | Khaws cia | ||||
| 14 | Kev ntsuas lub sij hawm (nrog 10 μs samplub sijhawm) | Lub sij hawm nkag | |||
| 15 | Counter /
Lub Sijhawm Ölçümü (1ms samplub sijhawm) |
Max. 15 kHz | Max. 15 kHz | Max. 1 kHz | Max. 1 kHz |
Chaw nyob tshwj xeeb rau hom 15:
| Parameter | DI 1 | DI 2 | DI 3 | DI 4 | DI 5 | DI 6 | DI 7 | DI 8 | Default |
| Kev teeb tsa Cov khoom | 40193 | 40201 | 40209 | 40217 | 40225 | 40233 | 40241 | 40249 | 2 |
| Lub Sijhawm Rov Pib Dua Tshiab (1-1000 sn) |
40196 |
40204 |
40212 |
40220 |
40228 |
40236 |
40244 |
40252 |
60 |
| Counter low-order 16-ntsis tus nqi | 30094 | 30102 | 30110 | 30118 | 30126 | 30134 | 30142 | 30150 | - |
| Counter high-order 16-ntsis tus nqi | 30095 | 30103 | 30111 | 30119 | 30127 | 30135 | 30143 | 30151 | - |
| Lub Sijhawm qis-txiav 16-ntsis tus nqi (ms) | 30096 | 30104 | 30112 | 30120 | 30128 | 30136 | 30144 | 30152 | - |
| Lub Sijhawm siab xaj 16-ntsis tus nqi (ms) | 30097 | 30105 | 30113 | 30121 | 30129 | 30137 | 30145 | 30153 | - |
Kev teeb tsa Cov khoom:
| DI 1 | DI 2 | DI 3 | DI 4 | DI 5 | DI 6 | DI 7 | DI 8 | Kev piav qhia |
| 40193.0me ntsis | 40201.0me ntsis | 40209.0me ntsis | 40217.0me ntsis | 40225.0me ntsis | 40233.0me ntsis | 40241.0me ntsis | 40249.0me ntsis | DIx pab me ntsis: 0 = DIx pab 1 = DIx disable |
|
40193.1me ntsis |
40201.1me ntsis |
40209.1me ntsis |
40217.1me ntsis |
40225.1me ntsis |
40233.1me ntsis |
40241.1me ntsis |
40249.1me ntsis |
Suav cov lus qhia me ntsis:
0 = suav 1 = suav |
| 40193.2me ntsis | 40201.2me ntsis | 40209.2me ntsis | 40217.2me ntsis | 40225.2me ntsis | 40233.2me ntsis | 40241.2me ntsis | 40249.2me ntsis | Khaws cia |
| 40193.3me ntsis | 40201.3me ntsis | 40209.3me ntsis | 40217.3me ntsis | 40225.3me ntsis | 40233.3me ntsis | 40241.3me ntsis | 40249.3me ntsis | DIx suav pib dua me ntsis:
1 = Reset DIx txee |
PID Settings
Lub PID lossis On/Off tswj feature tuaj yeem siv los ntawm kev teeb tsa qhov ntsuas tau txiav txim siab rau txhua qhov kev tawm tswv yim analog hauv module. Cov tswv yim analog nrog PID lossis ON / OFF muaj nuj nqi qhib tswj cov khoom tso tawm digital. Cov txiaj ntsig digital cuam tshuam nrog cov channel uas nws PID lossis ON / OFF muaj nuj nqi qhib tsis tuaj yeem tsav manually.
- Analog input AI1 tswj cov zis DO1.
- Analog input AI2 tswj cov zis DO2.
- Analog input AI3 tswj cov zis DO3.
- Analog input AI4 tswj cov zis DO4.
- Analog input AI5 tswj cov zis DO5.
PID Parameters:
| Parameter | Kev piav qhia |
| PID Active | Ua haujlwm PID lossis ON/OFF.
0 = Kev siv phau ntawv 1 = PID nquag 2 = ON/OFF nquag |
| Teeb tus nqi | Nws yog tus nqi teev rau PID lossis ON / OFF ua haujlwm. PT100 qhov tseem ceeb tuaj yeem nyob nruab nrab ntawm -200.0 thiab 650.0 rau kev tawm tswv yim, 0 thiab 20000 rau lwm hom. |
| Teeb Offset | Nws yog siv los ua tus nqi Offset hauv kev ua haujlwm PID. Nws tuaj yeem coj qhov tseem ceeb ntawm -325.0 thiab
325.0 rau PT100 input, -10000 rau 10000 rau lwm hom. |
| Teeb Hysteresis | Nws yog siv raws li Teem Hysteresis tus nqi hauv ON / OFF ua haujlwm. Nws tuaj yeem coj qhov tseem ceeb ntawm
-325.0 thiab 325.0 rau PT100 input, -10000 rau 10000 rau lwm hom. |
| Yam tsawg kawg nkaus tus nqi | Ua haujlwm nplai yog tus nqi qis dua. PT100 qhov tseem ceeb tuaj yeem nyob nruab nrab ntawm -200.0 thiab
650.0 rau cov tswv yim, 0 thiab 20000 rau lwm hom. |
| Tus nqi siab tshaj plaws | Ua hauj lwm nplai yog tus nqi siab tshaj. PT100 qhov tseem ceeb tuaj yeem nyob nruab nrab ntawm -200.0 thiab
650.0 rau cov tswv yim, 0 thiab 20000 rau lwm hom. |
| Cua sov tus nqi | Tus nqi piv rau cua sov. Nws tuaj yeem coj qhov tseem ceeb ntawm 0.0 thiab 100.0. |
| Cua sov Integral tus nqi | Qhov tseem ceeb ntawm cov cua sov. Nws tuaj yeem siv qhov tseem ceeb ntawm 0 thiab 3600 vib nas this. |
| Cua sov Derivative nqi | Derivative nqi rau cua sov. Nws tuaj yeem coj qhov tseem ceeb ntawm 0.0 thiab 999.9. |
| Txias tus nqi | Tus nqi sib npaug rau qhov txias. Nws tuaj yeem coj qhov tseem ceeb ntawm 0.0 thiab 100.0. |
| Txias Integral Tus nqi | Tus nqi tseem ceeb rau kev ua kom txias. Nws tuaj yeem siv qhov tseem ceeb ntawm 0 thiab 3600 vib nas this. |
| Txias Derivative nqi | Derivative nqi rau cua txias. Nws tuaj yeem coj qhov tseem ceeb ntawm 0.0 thiab 999.9. |
| Lub Sijhawm tso zis | Cov zis yog lub sijhawm tswj. Nws tuaj yeem siv qhov tseem ceeb ntawm 1 thiab 150 vib nas this. |
| Cua sov / cua txias xaiv | Qhia meej txog kev ua haujlwm channel rau PID lossis ON / OFF. 0 = Cua sov 1 = Cua txias |
| Nws Pib Qhib | Pib Auto Tune ua haujlwm rau PID.
0 = Auto Tune passive 1 = Nws pib Tune nquag |
- Nco tseg: Rau qhov tseem ceeb hauv cov ntawv sau, 10 npaug ntawm tus nqi tiag tiag ntawm cov kev txwv no yog siv hauv Modbus kev sib txuas lus.
PID Modbus Chaw Nyob:
| Parameter | AWM 1
Chaw nyob |
AWM 2
Chaw nyob |
AWM 3
Chaw nyob |
AWM 4
Chaw nyob |
AWM 5
Chaw nyob |
Default |
| PID Active | 40023 | 40043 | 40063 | 40083 | 40103 | 0 |
| Teeb tus nqi | 40024 | 40044 | 40064 | 40084 | 40104 | 0 |
| Teeb Offset | 40025 | 40045 | 40065 | 40085 | 40105 | 0 |
| Offset Sensor | 40038 | 40058 | 40078 | 40098 | 40118 | 0 |
| Teeb Hysteresis | 40026 | 40046 | 40066 | 40086 | 40106 | 0 |
| Yam tsawg kawg nkaus tus nqi | 40027 | 40047 | 40067 | 40087 | 40107 | 0/-200.0 Nws |
| Tus nqi siab tshaj plaws | 40028 | 40048 | 40068 | 40088 | 40108 | 20000/650.0 |
| Cua sov tus nqi | 40029 | 40049 | 40069 | 40089 | 40109 | 10.0 |
| Cua sov Integral tus nqi | 40030 | 40050 | 40070 | 40090 | 40110 | 100 |
| Cua sov Derivative nqi | 40031 | 40051 | 40071 | 40091 | 40111 | 25.0 |
| Txias tus nqi | 40032 | 40052 | 40072 | 40092 | 40112 | 10.0 |
| Txias Integral Tus nqi | 40033 | 40053 | 40073 | 40093 | 40113 | 100 |
| Txias Derivative nqi | 40034 | 40054 | 40074 | 40094 | 40114 | 25.0 |
| Lub Sijhawm tso zis | 40035 | 40055 | 40075 | 40095 | 40115 | 1 |
| Cua sov / cua txias xaiv | 40036 | 40056 | 40076 | 40096 | 40116 | 0 |
| Nws Pib Qhib | 40037 | 40057 | 40077 | 40097 | 40117 | 0 |
| PID Instant Output Tus Nqi (%) | 30024 | 30032 | 30040 | 30048 | 30056 | - |
| PID Status Bits | 30025 | 30033 | 30041 | 30049 | 30057 | - |
| PID Configuration Bits | 40039 | 40059 | 40079 | 40099 | 40119 | 0 |
| Auto Tune Status Bits | 30026 | 30034 | 30042 | 30050 | 30058 | - |
PID Configuration Bits:
| AI1 Chaw nyob | AI2 Chaw nyob | AI3 Chaw nyob | AI4 Chaw nyob | AI5 Chaw nyob | Kev piav qhia |
| 40039.0me ntsis | 40059.0me ntsis | 40079.0me ntsis | 40099.0me ntsis | 40119.0me ntsis | PID nres:
0 = PID kev ua haujlwm txuas ntxiv mus. 1 = PID raug tso tseg thiab cov zis tau muab tua. |
PID Status Bits:
| AI1 Chaw nyob | AI2 Chaw nyob | AI3 Chaw nyob | AI4 Chaw nyob | AI5 Chaw nyob | Kev piav qhia |
| 30025.0me ntsis | 30033.0me ntsis | 30041.0me ntsis | 30049.0me ntsis | 30057.0me ntsis | PID xam raws li txoj cai:
0 = xam PID 1 = PID tsis xam. |
|
30025.1me ntsis |
30033.1me ntsis |
30041.1me ntsis |
30049.1me ntsis |
30057.1me ntsis |
Integral xam raws li txoj cai:
0 = Kev xam qhov tseem ceeb 1 = Integral tsis suav |
Auto-Tune Status Bits:
| AI1 Chaw nyob | AI2 Chaw nyob | AI3 Chaw nyob | AI4 Chaw nyob | AI5 Chaw nyob | Kev piav qhia |
| 30026.0me ntsis | 30034.0me ntsis | 30042.0me ntsis | 30050.0me ntsis | 30058.0me ntsis | Auto Tune thawj kauj ruam xwm txheej:
1 = Thawj kauj ruam yog nquag. |
| 30026.1me ntsis | 30034.1me ntsis | 30042.1me ntsis | 30050.1me ntsis | 30058.1me ntsis | Auto Tune thib ob kauj ruam xwm txheej:
1 = Qhov thib ob kauj ruam yog nquag. |
| 30026.2me ntsis | 30034.2me ntsis | 30042.2me ntsis | 30050.2me ntsis | 30058.2me ntsis | Auto Tune thib peb kauj ruam xwm txheej:
1 = Qhov thib peb kauj ruam yog active. |
| 30026.3me ntsis | 30034.3me ntsis | 30042.3me ntsis | 30050.3me ntsis | 30058.3me ntsis | Auto Tune kawg kauj ruam xwm txheej:
1 = Auto Tune tiav. |
| 30026.4me ntsis | 30034.4me ntsis | 30042.4me ntsis | 30050.4me ntsis | 30058.4me ntsis | Auto Tune Timeout yuam kev:
1 = Muaj sij hawm. |
Txhim kho kev sib txuas lus los ntawm Default
Rau daim npav nrog version V01;
- Fais fab tua I/O Module ntaus ntawv.
- Nqa lub hau ntawm lub cuab yeej.
- Short circuit pins 2 thiab 4 ntawm lub qhov (socket) qhia hauv daim duab.
- Tos tsawg kawg 2 vib nas this los ntawm energizing. Tom qab 2 vib nas this, cov kev sib txuas lus yuav rov qab mus rau lub neej ntawd.
- Tshem tawm qhov luv luv.
- Kaw lub hau npog.
Rau daim npav nrog version V02;
- Fais fab tua I/O Module ntaus ntawv.
- Nqa lub hau ntawm lub cuab yeej.
- Muab ib lub jumper rau ntawm lub qhov (socket) uas pom hauv daim duab.
- Tos tsawg kawg 2 vib nas this los ntawm energizing. Tom qab 2 vib nas this, cov kev sib txuas lus yuav rov qab mus rau lub neej ntawd.
- Tshem tawm lub jumper.
- Kaw lub hau npog.
Modbus qhev chaw xaiv xaiv
Tus qhev chaw nyob tuaj yeem teem caij los ntawm 1 txog 255 ntawm qhov chaw nyob 40001 ntawm modbus. Tsis tas li ntawd, Dip Hloov ntawm daim npav tuaj yeem siv los teeb tsa tus qhev chaw nyob ntawm daim npav V02.
| DUB SWITCH | ||||
| KHW ID | 1 | 2 | 3 | 4 |
| Tsis yog 1 | ON | ON | ON | ON |
| 1 | OFF | ON | ON | ON |
| 2 | ON | OFF | ON | ON |
| 3 | OFF | OFF | ON | ON |
| 4 | ON | ON | OFF | ON |
| 5 | OFF | ON | OFF | ON |
| 6 | ON | OFF | OFF | ON |
| 7 | OFF | OFF | OFF | ON |
| 8 | ON | ON | ON | OFF |
| 9 | OFF | ON | ON | OFF |
| 10 | ON | OFF | ON | OFF |
| 11 | OFF | OFF | ON | OFF |
| 12 | ON | ON | OFF | OFF |
| 13 | OFF | ON | OFF | OFF |
| 14 | ON | OFF | OFF | OFF |
| 15 | OFF | OFF | OFF | OFF |
- Nco tseg 1: Thaum tag nrho cov Dip Switches ON, tus nqi hauv Modbus sau npe 40001 yog siv los ua tus qhev chaw nyob.
Warranty
Cov khoom no tau lees paub qhov tsis xws luag hauv cov ntaub ntawv thiab kev ua haujlwm rau lub sijhawm ob xyoos txij li hnub xa khoom mus rau Tus Neeg Yuav Khoom. Lub Warranty yog txwv rau kev kho lossis hloov cov khoom tsis raug ntawm qhov kev xaiv ntawm cov chaw tsim khoom. Qhov kev lees paub no tsis muaj pov thawj yog tias cov khoom raug hloov pauv, siv tsis raug, rhuav tshem, lossis lwm yam kev tsim txom.
Kev tu
Kev kho yuav tsum tsuas yog ua los ntawm cov neeg ua haujlwm raug cob qhia thiab tshwj xeeb. Txiav lub hwj chim rau lub cuab yeej ua ntej nkag mus rau hauv qhov chaw. Tsis txhob ntxuav cov ntaub ntawv nrog cov kuab tshuaj hydrocarbon (Petrol, Trichlorethylene, thiab lwm yam). Kev siv cov kuab tshuaj no tuaj yeem txo cov neeg kho tshuab kev ntseeg siab ntawm cov cuab yeej.
Lwm cov ntaub ntawv
- Cov ntaub ntawv tsim khoom:
- Emko Elektronik Sanayi thiab Ticaret A.Ş.
- Bursa Organize Sanayi Bölgesi, (Fethiye OSB Mah.)
- Ali Osman Sönmez Bulvarı, 2. Sokak, No: 3 16215
- BURSA/Turkey
- Xov tooj: (224) 261 1900
- Fax: (224) 261 1912
- Kho thiab tu cov ntaub ntawv kev pab cuam:
- Emko Elektronik Sanayi thiab Ticaret A.Ş.
- Bursa Organize Sanayi Bölgesi, (Fethiye OSB Mah.)
- Ali Osman Sönmez Bulvarı, 2. Sokak, No: 3 16215
- BURSA/Turkey
- Xov tooj: (224) 261 1900
- Fax: (224) 261 1912
Cov ntaub ntawv / Cov ntaub ntawv
 |
EMKO PROOP Input lossis Output Module [ua pdf] Tus neeg siv phau ntawv PROOP, Input lossis Output Module, PROOP Input lossis Output Module, Input Module, Output Module, Module |
