EDA ED-HMI3020-070C Embedded Computers

Cov ntaub ntawv khoom

• Specifications
  • Qauv: ED-HMI 3020-070C
  • Chaw tsim tshuaj paus: EDA Technology Co., Ltd
  • Daim ntawv thov: IOT, kev tswj hwm kev lag luam, automation, ntsuab zog, kev txawj ntse
  • Txhawb Kev Nyeem Ntawv: Mechanical Engineer, Hluav Taws Xob Engineering, Software Engineer, System Engineer
  • Kev them nyiaj yug: Siv sab hauv tsev nkaus xwb

Cov lus qhia siv khoom

• Cov lus qhia kev nyab xeeb
  • Siv cov khoom hauv ib puag ncig uas ua tau raws li cov qauv tsim.
  • Zam kev ua haujlwm tsis raug cai uas yuav ua rau muaj kev nyab xeeb ntawm tus kheej lossis kev poob khoom.
  • Tsis txhob hloov cov khoom siv yam tsis tau tso cai.
  • Txhim kho cov cuab yeej ruaj ntseg thaum lub sijhawm teeb tsa kom tsis txhob poob.
  • Khaws qhov deb ntawm yam tsawg kawg 20cm ntawm cov khoom siv yog tias nws muaj lub kav hlau txais xov.
  • Tsis txhob siv cov cuab yeej ua kua thiab kom deb ntawm cov kua thiab cov khoom siv hluav taws xob.
  • Tsuas yog siv cov khoom siv sab hauv tsev.
• Cov ntaub ntawv tiv tauj
  • Yog tias koj xav tau kev pab ntxiv lossis muaj lus nug, koj tuaj yeem tiv tauj EDA Technology Co., LTD:
    • Email: sales@edatec.cn.
    • Xov tooj: + 86-18217351262
    • Webqhov chaw: www.edatec.cn
• Daim ntawv tshaj tawm
  • EDA Technology Co., Ltd Ib qho kev faib tawm lossis kev hloov pauv ntawm daim ntawv no yog txwv tsis pub.
• Cov ntawv qhia ntsig txog
  • Koj tuaj yeem nrhiav cov ntaub ntawv khoom ntxiv xws li cov ntaub ntawv, cov ntaub ntawv siv, thiab cov ntawv qhia kev siv ntawm EDA Technology Co., LTD webqhov chaw.
• Nyeem Ntawv Scope
  • Phau ntawv no yog tsim los rau Mechanical Engineers, Electrical Engineers, Software Engineers, thiab System Engineers uas yuav siv cov khoom.
• Lus qhuab ntuas
  • Cov khoom siv phau ntawv muab cov ntaub ntawv tseem ceeb hais txog kev siv kom raug thiab tuav cov khoom. Thov nyeem phau ntawv ua tib zoo ua ntej siv cov khoom.

FAQs

• Q: Kuv puas tuaj yeem siv cov khoom siv sab nraum zoov?
  • A: Tsis yog, cov khoom tsuas yog txhawb rau kev siv sab hauv tsev.
• Q: Kuv yuav ua li cas yog tias kuv ntsib teeb meem technical?
  • A: Koj tuaj yeem tiv tauj technical support ntawm email ntawm support@edatec.cn. los yog hauv xov tooj ntawm +86-18627838895.

Lus qhuab ntuas

Cov ntawv qhia ntsig txog
Txhua yam khoom siv cov ntaub ntawv uas muaj nyob rau hauv cov khoom yog qhia nyob rau hauv cov lus hauv qab no, thiab cov neeg siv yuav xaiv tau view cov ntaub ntawv sib raug raws li lawv xav tau.

Cov ntaub ntawv	Kev qhia
ED-HMI3020-070C Cov ntaub ntawv	Cov ntaub ntawv no qhia txog cov yam ntxwv ntawm cov khoom, software thiab kho vajtse specifications, qhov ntev thiab kev txiav txim code ntawm ED-HMI3020-070C los pab cov neeg siv nkag siab txog tag nrho cov txheej txheem ntawm cov khoom.
ED-HMI3020-070C Tus neeg siv phau ntawv	Cov ntaub ntawv no qhia txog cov tsos, kev teeb tsa, kev pib thiab kev teeb tsa ntawm ED-HMI3020-070C los pab cov neeg siv khoom siv zoo dua.
ED-HMI3020-070C Daim Ntawv Qhia Daim Ntawv Thov	Cov ntaub ntawv no qhia txog kev rub tawm OS files, flashing rau SD phaib, Firmware Update, thiab Configuring booting los ntawm SSD ntawm ED- HMI3020-070C los pab cov neeg siv cov khoom zoo dua.

Cov neeg siv tuaj yeem mus saib hauv qab no website kom paub ntau ntxiv: https://www.edatec.cn.

Nyeem Ntawv Scope

• Phau ntawv no siv rau cov neeg nyeem hauv qab no:
  • Mechanical Engineer
  • Hluav Taws Xob Engineering
  • Software Engineer
  • System Engineer

Daim ntawv cog lus ntsig txog

Symbolic Convention

Cov lus qhia kev nyab xeeb

Cov khoom no yuav tsum tau siv nyob rau hauv ib puag ncig uas ua tau raws li qhov yuav tsum tau ua ntawm kev tsim tshwj xeeb, txwv tsis pub nws yuav ua rau tsis ua haujlwm, thiab kev ua haujlwm tsis zoo lossis cov khoom puas tsuaj los ntawm kev tsis ua raws li cov kev cai cuam tshuam tsis nyob rau hauv cov khoom lag luam zoo.

• Peb lub tuam txhab yuav tsis ris lub luag haujlwm raug cai rau kev nyab xeeb ntawm tus kheej thiab kev puas tsuaj los ntawm kev ua haujlwm tsis raug cai ntawm cov khoom.
• Thov tsis txhob hloov cov khoom siv yam tsis tau kev tso cai, uas yuav ua rau cov cuab yeej tsis ua haujlwm.
• Thaum txhim kho cov cuab yeej, nws yog ib qho tsim nyog yuav tsum tau kho cov cuab yeej kom tsis txhob poob.
• Yog tias cov cuab yeej tau nruab nrog lub kav hlau txais xov, thov khaws qhov deb tsawg kawg 20cm ntawm cov khoom siv thaum siv.
• Tsis txhob siv cov khoom siv ua kua, thiab kom deb ntawm cov kua thiab cov khoom siv hluav taws xob.
• Cov khoom no tsuas yog txhawb rau kev siv sab hauv tsev.

Txhim kho OS
Tshooj no qhia txog yuav ua li cas rub tawm OS files thiab flash lawv rau SD card.

• Downloading OS File
• Flashing rau SD Card

Downloading OS File

Yog tias lub operating system puas thaum siv, koj yuav tsum rov rub tawm qhov tseeb version ntawm OS file thiab nyem rau ntawm SD daim npav. Txoj kev download yog ED-HMI 3020-070C/raspios.

Flashing rau SD Card

ED-HMI3020-070C pib lub kaw lus los ntawm SD daim npav los ntawm lub neej ntawd. Yog tias koj xav siv OS tshiab, koj yuav tsum nyem OS rau SD daim npav. Nws raug pom zoo kom siv Raspberry Pi cuab tam, thiab txoj kev rub tawm yog raws li hauv qab no:

Raspberry Pi Imager: https://downloads.raspberrypi.org/imager/imager_latest.exe.

Kev npaj:

• Kev rub tawm thiab teeb tsa lub cuab yeej Raspberry Pi Imager rau lub computer tau ua tiav.
• Ib daim npav nyeem tau raug npaj.
• OS file ua tau.
• SD daim npav ED-HMI3020-070C tau txais.

CEEB TOOM: Thov tua lub hwj chim ua ntej ntxig lossis tshem daim npav SD.

• a) Nrhiav qhov chaw ntawm daim npav SD, raws li pom hauv lub cim liab ntawm daim duab hauv qab no.
• b) Tuav daim npav SD thiab rub nws tawm.

Cov kauj ruam:
Cov kauj ruam tau piav qhia siv Windows system ua tus example.

1. Ntxig SD daim npav rau hauv daim npav nyeem ntawv, thiab tom qab ntawd ntxig daim npav nyeem ntawv rau hauv USB chaw nres nkoj ntawm PC.
2. Qhib Raspberry Pi Imager, xaiv "CHOOSE OS" thiab xaiv "Siv Kev Cai" hauv lub pane pop-up.
3. Raws li qhov tshwm sim, xaiv lub downloaded OS file nyob rau hauv tus neeg siv-txhais txoj kev thiab rov qab mus rau nplooj ntawv tseem ceeb.
4. Nyem "CHOOSE STORAGE", xaiv SD daim npav ntawm ED-HMI3020-070C nyob rau hauv "Cia" pane, thiab rov qab mus rau nplooj ntawv tseem ceeb.
5. Nyem "Tom ntej", thiab xaiv "NO" nyob rau hauv lub pop-up "Siv OS customization?" pane.
6. Xaiv "YES" nyob rau hauv lub pop-up "Warning" pane pib sau cov duab.
7. Tom qab OS sau tiav, lub file yuav raug txheeb xyuas.
8. Tom qab qhov kev txheeb xyuas tiav lawm, nyem "CONTINUE" hauv lub pop-up "Sau tiav" lub thawv.
9. Kaw lub Raspberry Pi Imager, thiab tshem tawm daim npav nyeem ntawv.
10. Ntxig SD daim npav rau hauv ED-HMI3020-070C, thiab rov pib dua.

Firmware Update

Tom qab lub kaw lus pib ib txwm, koj tuaj yeem ua raws li cov lus txib hauv qab no hauv cov lus txib pane txhawm rau txhim kho lub firmware thiab txhim kho cov haujlwm software.

• sudo apt hloov tshiab
• sudo apt hloov tshiab

Configuring booting los ntawm SSD (yeem)

Tshooj no qhia txog cov kauj ruam los teeb tsa booting los ntawm SSD.

• Flashing rau SSD
• Teem BOOT_ORDER

Flashing rau SSD

ED-HMI3020-070C txhawb kev xaiv SSD. Yog tias cov neeg siv xav tau khau raj lub kaw lus los ntawm SSD, lawv yuav tsum nyem cov duab rau SSD ua ntej siv nws.
CEEB TOOM: Yog tias muaj daim npav SD hauv ED-HMI3020-070C, lub kaw lus yuav khau raj ntawm SD daim npav los ntawm lub neej ntawd.

Flashing los ntawm SSD lub thawv

• Koj tuaj yeem nyem rau SSD los ntawm lub thawv SSD ntawm lub Windows PC. Nws raug pom zoo kom siv Raspberry Pi cuab tam thiab txoj kev rub tawm yog raws li hauv qab no:
• Raspberry Pi Imager: https://downloads.raspberrypi.org/imager/imager_latest.exe.

Kev npaj:

• Ib lub thawv SSD tau npaj lawm.
• Cov ntaub ntawv ntaus ntawv tau qhib thiab SSD tau raug tshem tawm. Rau cov haujlwm ntxaws ntxaws, thov mus saib Tshooj 2.3 thiab 2.4 ntawm "ED-HMI3020-070C User Manual".
• Kev rub tawm thiab teeb tsa lub cuab yeej Raspberry Pi Imager rau lub computer tau ua tiav.
• OS file tau txais, thiab txoj kev download yog ED-HMI 3020-070C/raspios.

Cov kauj ruam:
Cov kauj ruam tau piav qhia siv Windows system ua tus example.

1. Nruab SSD rau hauv SSD lub thawv.
2. Txuas lub USB chaw nres nkoj ntawm SSD lub thawv rau lub PC, tom qab ntawd xyuas kom tseeb tias SSD tuaj yeem tshwm sim hauv PC.
   • TSWV YIM: Yog tias SSD tsis tuaj yeem tshwm sim hauv PC, koj tuaj yeem tsim SSD ua ntej.
3. Qhib Raspberry Pi Imager, xaiv "CHOOSE OS" thiab xaiv "Siv Kev Cai" hauv lub pane pop-up.
4. Raws li qhov tshwm sim, xaiv lub downloaded OS file nyob rau hauv tus neeg siv-txhais txoj kev thiab rov qab mus rau nplooj ntawv tseem ceeb.
5. Nyem "CHOOSE STORAGE", xaiv SSD ntawm ED-HMI3020-070C hauv "Storage" pane, thiab rov qab mus rau nplooj ntawv tseem ceeb.
6. Nyem "Tom ntej", thiab xaiv "NO" nyob rau hauv lub pop-up "Siv OS customization?" pane.
7. Xaiv "YES" nyob rau hauv lub pop-up "Warning" pane pib sau cov duab.
8. Tom qab OS sau tiav, lub file yuav raug txheeb xyuas.
9. Tom qab qhov kev txheeb xyuas tiav lawm, nyem "CONTINUE" hauv lub pop-up "Sau tiav" lub thawv.
10. Kaw lub Raspberry Pi Imager thiab tshem tawm lub thawv SSD.
11. Tshem tawm SSD los ntawm SSD lub thawv, teeb tsa SSD rau PCBA thiab kaw cov ntaub ntawv ntaus ntawv (Rau cov haujlwm ntxaws, thov mus saib Tshooj 2.5 thiab 2.7 ntawm "ED-HMI3020-070C User Manual").

Flashing ntawm ED-HMI3020-070C

Kev npaj:

• ED-HMI3020-070C tau booted los ntawm SD daim npav, thiab ED-HMI3020-070C muaj SSD.
• OS file tau txais, thiab txoj kev rub tawm yog ED-HMI3020-070C/raspios.

Cov kauj ruam:
Cov kauj ruam tau piav qhia siv Windows system ua tus example.

1. Unzip lub downloaded OS file (“.zip” file), tau txais ".img" file, thiab khaws cia rau hauv cov ntawv teev npe ntawm PC hauv zos, xws li Desktop.
2. Siv cov lus txib SCP ntawm Windows PC los luam tawm OS file (.img) to ED-HMI3020-070C.
   • a) Nkag mus rau Windows + R kom qhib lub pane khiav, nkag mus rau cmd, thiab nias Enter kom qhib qhov hais kom ua pane.
   • b) Ua raws li cov lus txib hauv qab no kom luam tawm OS file (.img) to the pi directory of ED- HMI3020-070C.
   • scp “Desktop\2024-01-10-ed-HMI3020-070C_raspios-bookworm-arm64_stable.img” pi@192.168.168.155:~
   • Desktop\2024-01-10-ed-HMI3020-070C_raspios-bookworm-arm64_stable.img: Qhia qhov chaw cia ntawm ".img" file ntawm windows PC.
   • Pi: Qhia txog txoj kev khaws cia ntawm ".img" file ntawm ED-HMI3020-070C (txoj kev uas ".img" file yog khaws cia tom qab luam ntawv tiav).
   • 192.168.168.155: IP chaw nyob ntawm ED-HMI3020-070C
3. Tom qab daim ntawv luam tiav lawm, view lub ".img" file Hauv phau ntawv qhia pi ntawm ED-HMI3020-070C.
4. Nyem lub icon nyob rau hauv lub ces kaum sab laug ntawm lub desktop, xaiv "Accessories → Imager" hauv cov ntawv qhia zaub mov, thiab qhib lub cuab yeej Raspberry Pi Imager.
5. Nyem "CHOOSE DEVICE", thiab xaiv "Raspberry Pi 5" nyob rau hauv lub pop-up "Raspberry Pi Device" pane.
6. Nyem "Xaiv OS", thiab xaiv "Siv Custom" nyob rau hauv lub pop-up "Operating System" pane.
7. Raws li qhov tshwm sim, xaiv lub downloaded OS file nyob rau hauv tus neeg siv-txhais txoj kev thiab rov qab mus rau nplooj ntawv tseem ceeb.
8. Nyem "CHOOSE STORAGE", xaiv SSD ntawm ED-HMI3020-070C hauv "Storage" pane, thiab rov qab mus rau nplooj ntawv tseem ceeb.
9. Nyem "Tom ntej" thiab xaiv "NO" nyob rau hauv lub pop-up "Siv OS customization?".
10. Xaiv "YES" hauv qhov pop-up "Warning".
11. Sau lo lus zais (raspberry) hauv pop-up "Authenticate", thiab tom qab ntawd nyem "Authenticate" los pib sau OS.
12. Tom qab OS sau tiav, lub file yuav raug txheeb xyuas.
13. Tom qab kev txheeb xyuas tiav, nkag mus rau tus password (raspberry) hauv qhov pop-up "Authenticate", thiab tom qab ntawd nyem "Authenticate".
14. Nyob rau hauv lub pop-up "Sau ua tau zoo" lub thawv tam sim, nyem "KUB", tom qab ntawd kaw Raspberry Pi Imager.

Teem BOOT_ORDER

Yog tias ED-HMI3020-070C muaj daim npav SD, lub kaw lus yuav khau raj ntawm SD daim npav los ntawm lub neej ntawd. Yog tias koj xav teeb tsa khau raj los ntawm SSD, koj yuav tsum teeb tsa BOOT_ORDER cov cuab yeej, uas teeb tsa khau raj los ntawm SSD los ntawm lub neej ntawd thaum tsis muaj SD daim npav tso). Cov tsis muaj BOOT_ORDER cov cuab yeej khaws cia hauv "rpi-eeprom-config" file.

Kev npaj:

• Nws tau lees paub tias ED-HMI3020-070C muaj SSD.
• ED-HMI3020-070C tau raug booted los ntawm SD card thiab lub desktop yog tso tawm kom pom ib txwm.

Cov kauj ruam:

1. Ua raws li cov lus txib hauv qab no hauv qhov hais kom ua pane rau view BOOT_ORDER cov cuab yeej hauv "rpi-eeprom-config" file.
   • "BOOT_ORDER" nyob rau hauv daim duab qhia cov kab ke parameter rau booting, thiab teem lub parameter tus nqi rau 0xf41 qhia booting los ntawm SD card.
2. Ua raws li cov lus txib hauv qab no los qhib "rpi-eeprom-config" file, thiab teeb tus nqi ntawm "BOOT_ORDER" rau 0xf461 (0xf461 txhais tau hais tias yog tias daim npav SD tsis tso, nws yuav khau raj los ntawm SSD; yog tias daim npav SD raug tso, nws yuav khau raj ntawm SD card.), tom qab ntawd ntxiv qhov parameter " PCIE_PROBE = 1 ". sudo -E RPI-eeprom-config -edit
   • CEEB TOOM: Yog tias koj xav khau raj los ntawm SSD, nws raug nquahu kom teeb tsa BOOT_ORDER rau 0xf461.
3. Nkag mus Ctrl + X kom tawm hauv hom hloov kho.
4. Nkag mus Y kom txuag tau qhov file, ces nias Enter kom tawm ntawm nplooj ntawv tseem ceeb ntawm lub pane hais kom ua.
5. Fais fab tuag ED-HMI3020-070C thiab rub tawm SD daim npav.
6. Fais fab ntawm ED-HMI3020-070C kom rov pib lub cuab yeej.

EDA Technology Co., LTD Lub Peb Hlis 2024

Tiv tauj peb

Ua tsaug ntau rau kev yuav khoom thiab siv peb cov khoom, thiab peb yuav pab koj tag nrho. Raws li ib qho ntawm cov koom tes tsim thoob ntiaj teb ntawm Raspberry Pi, peb tau cog lus los muab cov kev daws teeb meem kho vajtse rau IOT, kev tswj hwm kev lag luam, automation, ntsuab zog thiab kev txawj ntse tsim raws li Raspberry Pi thev naus laus zis platform.

Koj tuaj yeem tiv tauj peb raws li hauv qab no:

• EDA Technology Co., Ltd
• Chaw nyob: Tsev 29, No.1661 Jialuo Txoj Kev, Jiading District, Shanghai
• Xa ntawv: sales@edatec.cn.
• Xov tooj: + 86-18217351262
• Webqhov chaw: https://www.edatec.cn.

Kev pab txhawb nqa:

• Xa ntawv: support@edatec.cn.
• Xov tooj: + 86-18627838895
• Wechat: tzw_1998-

Daim ntawv tshaj tawm

• EDA Technology Co., Ltd
• EDA Technology Co., LTD yog tus tswv ntawm cov ntaub ntawv no thiab tuav txhua txoj cai. Yog tias tsis muaj ntawv tso cai los ntawm EDA Technology Co., LTD, tsis muaj ib feem ntawm daim ntawv no yuav raug hloov kho, faib lossis theej rau txhua txoj kev lossis daim ntawv.

Tsis lees paub

EDA Technology Co., LTD tsis tau lees tias cov ntaub ntawv hauv phau ntawv no yog hloov tshiab, raug, ua tiav lossis zoo. EDA Technology Co., LTD kuj tsis lees paub qhov kev siv cov ntaub ntawv no ntxiv. Yog tias cov khoom siv lossis cov khoom tsis raug cuam tshuam yog tshwm sim los ntawm kev siv lossis tsis siv cov ntaub ntawv hauv phau ntawv no, lossis siv cov ntaub ntawv tsis raug lossis tsis tiav, tsuav nws tsis muaj pov thawj tias nws yog lub hom phiaj lossis tsis saib xyuas ntawm EDA Technology Co., LTD, kev lav phib xaub rau EDA Technology Co., LTD tuaj yeem raug zam. EDA Technology Co., LTD nthuav tawm txoj cai los hloov kho lossis ntxiv cov ntsiab lus lossis ib feem ntawm phau ntawv no yam tsis muaj ntawv ceeb toom tshwj xeeb.

Cov ntaub ntawv / Cov ntaub ntawv

EDA ED-HMI3020-070C Embedded Computers [ua pdf] Cov neeg siv phau ntawv qhia ED-HMI3020-070C Embedded Computers, ED-HMI3020-070C, Embedded Computers, Khoos phib tawj

Cov ntaub ntawv

• Cov neeg siv phau ntawv