Power Control Processor Mk2 Network Termination Kit

Cov ntaub ntawv khoom

Lub Hwj Huam Tswjhwm Txheej Txheem Mk2 (PCP-Mk2) yog cov khoom siv siv hauv Echo Relay Vaj Huam Sib Luag Mains Pub thiab Elaho Relay Vaj Huam Sib Luag Mains Pub (ERP Mains Pub), Echo Relay Panel Feedthrough thiab Elaho Relay Vaj Huam Sib Luag Feedthrough (ERP Feedthrough), thiab Sensor IQ systems . PCP-Mk2 network termination cov khoom suav nrog Cat5 connectors, ib lub npov-mount Cat5, ob daim kab xev, thiab Cat5 thaj cables. Cov khoom siv muaj nyob rau hauv ob qhov sib txawv, 7123K1129 ERP-FT thiab 7131K1029 Sensor IQPCP-Mk2 Network Termination Kits, thiab 7123K1029 ERP PCP-Mk2 Network Termination Kits. Cov khoom yog tsim los pab cov neeg siv xaim cov connectors thiab sib sau ua ke rau hauv cov panels zoo.

Khoom siv

CEEB TOOM: NYIAJ TXIAJ NTSIM NTAWM ELECTRIC SHOCK!
Ua ntej ua haujlwm hauv vaj huam sib luag, xyuas kom meej tias tag nrho lub zog rau lub vaj huam sib luag raug txiav kom tsis txhob raug mob lossis tuag.

Cov cuab yeej xav tau

Cov neeg siv xav tau ETC Retrofit Guide, Fais Fab Tswj Xyuas Txheej Txheem Mk2 Network Termination Kit, thiab cov cuab yeej txheem Cat5.

Txuas lub Connector

Ua raws li cov kauj ruam no kom xa cov Qeb 5 nto-mount connector:

1. Cia qhov ntev li ntawm 25 cm (10 nyob rau hauv) nyob rau hauv lub vaj huam sib luag rau kev sib txuas thiab slack rau yav tom ntej kev xav tau kev pab.
2. Ua raws li cov txheej txheem kev teeb tsa Cat5 kom tshem tawm qhov kawg ntawm lub tsho cable thiab nthuav tawm cov neeg xyuas pib.
3. Untwist lub conductors thiab kab lawv raws li T568B xim-coded markings. Ntxig cov conductors rau hauv lub connector cap. Lub tsho cable yuav tsum tuaj ze rau ntawm ntug ntawm lub connector nrog me ntsis ntawm cov conductors pom li sai tau. Txwv tsis pub, txiav tawm lub cable squarely thiab pib dua.
4. Yog hais tias ib qho kev sib txuas txuas mus dhau ntawm ntug ntawm lub hau txuas, luas qhov ntau tshaj kom qhov kawg ntawm cov neeg xyuas pib ntws nrog ntug ntawm lub hau txuas.
5. Nias lub hau kom ruaj khov rau ntawm lub hauv paus connector kom txog thaum ob daim snaps ua ke. Siv cov pliers sib koom ua ke los siv lub siab sib npaug thoob plaws lub hau thiab kom ruaj ntseg kev sib txuas, tab sis nco ntsoov tsis txhob tawg cov yas thaum siv lub zog.

Txuas lub Connector rau lub thawv thiab sib dhos

Ua raws li cov kauj ruam no kom txuas lub connector rau lub thawv thiab sib sau ua ke:

1. Ntxig rau pem hauv ntej ntawm lub connector mus rau hauv lub mounting lub thawv kom lub qhov nyob rau hauv pem hauv ntej ntug ntawm lub connector dlhos nrog lub tab nyob rau hauv qab seem ntawm lub thawv.
2. Nias rau hauv qab ntawm lub connector kom snap nws mus rau hauv lub thawv.
3. Sab nraub qaum ntawm lub hau muaj ib qho me me U-shaped cutout. Tshem tawm qhov kev txiav tawm no kom cia lub cable hla dhau yam tsis tau pinched. Hla lub cable los ntawm lub thawv ntawv qhia raws li qhia.
4. Teem lub hau nrog rau sab hauv qab thiab snap ob daim ua ke.

Txhim kho lub Connector hauv Vaj Huam Sib Luag

Siv daim kab xev ob sab uas tau muab rau hauv cov khoom siv rov qab los txuas rau hauv qab ntawm lub npov saum npoo ntawm koj lub vaj huam sib luag. Saib cov duab hauv qab no rau kev siv:

Tom qab txuas lub npov-mount lub thawv rau lub vaj huam sib luag, cov khoom tau npaj rau kev siv.

Tshajview

• Lub Hwj Huam Tswjhwm Txheej Txheem Mk2 (PCP-Mk2) yog siv hauv Echo Relay Vaj Huam Sib Luag Mains Pub thiab Elaho Relay Vaj Huam Sib Luag Mains Pub (ERP Mains Pub), Echo Relay Panel Feedthrough thiab Elaho Relay Vaj Huam Sib Luag Feedthrough (ERP Feedthrough), thiab Sensor IQ systems.
• CEEB TOOM: NYIAJ TXIAJ NTSIM NTAWM ELECTRIC SHOCK! Kev tsis txuas tag nrho lub zog rau lub vaj huam sib luag ua ntej ua haujlwm sab hauv tuaj yeem ua rau raug mob hnyav lossis tuag.
• De-energize lub ntsiab pub rau lub vaj huam sib luag thiab ua raws li qhov tsim nyog Lockout /Tagtawm cov txheej txheem raws li tau txib los ntawm NFPA 70E. Nws yog ib qho tseem ceeb uas yuav tsum nco ntsoov tias cov khoom siv hluav taws xob xws li relay panels tuaj yeem ua rau muaj teeb meem arc flash yog tias ua haujlwm tsis raug. Qhov no yog vim muaj qhov siab ntawm qhov luv luv tam sim no muaj nyob rau ntawm cov khoom siv hluav taws xob rau cov khoom siv no. Txhua txoj haujlwm yuav tsum ua raws li OSHA Kev Ua Haujlwm Zoo.

Nrog rau hauv Cov Khoom Siv

7123K1129 ERP-FT thiab 7131K1029 Sensor IQPCP-Mk2 Network Termination Kits

Kev piav qhia	ETC Tshooj Naj Npawb	Ntau
Cat5 connector	N2026	1
Nto-mount Cat5 lub thawv	N2025	1
Ob daim kab xev, 1.5 nti	kuv 342	1
1 ft Cat5 thaj cable	N4036	1

7123K1029 ERP PCP-Mk2 Network Termination Kit

Kev piav qhia	ETC Tshooj Naj Npawb	Ntau
Cat5 connector	N2026	1
Nto-mount Cat5 lub thawv	N2025	1
Ob daim kab xev, 1.5 nti	kuv 342	1
Cable khi nplaum mount	HWV 741	2
Cable khi	HWV 701	2
4 ft Cat5 thaj cable	N4009	1

Cov cuab yeej xav tau

• Phillips ntsia hlau
• Tshem cov pliers
• Sheathing cuab tam los yog cutter rau Cat5 cable tsho

Txuas lub Connector

Qeb 5 nto-mount connector nkag rau hauv cov khoom siv no suav nrog ob daim: ib lub hauv paus thiab lub hau. Lub kaus mom muaj cov cim xim ntawm ib qho kawg los qhia qhov twg los ntxig rau txhua qhov ntawm cov xov hlau xim xim. Ua raws li T568B txoj kev xaim hluav taws xob, raws li tau piav qhia ntawm daim ntawv nplaum, rau kev sib raug zoo nrog ETC network thaiv cov rooj sib tham.

1. Cia qhov ntev li ntawm 25 cm (10 nyob rau hauv) nyob rau hauv lub vaj huam sib luag rau kev sib txuas thiab slack rau yav tom ntej kev xav tau kev pab.
2.  Ua raws li cov txheej txheem kev teeb tsa Cat5 kom tshem tawm qhov kawg ntawm lub tsho cable thiab nthuav tawm cov neeg siv khoom:
   • Tshem tawm li 13 hli (1/2 nyob rau hauv) ntawm qhov kawg ntawm lub tsho sab nrauv siv lub cuab yeej sheathing los yog cutter, xyuas kom tsis txhob puas lub rwb thaiv tsev ntawm cov conductors sab hauv. Yog hais tias ib los yog ntau tshaj ntawm cov conductors puas thaum lub sij hawm tus txheej txheem no, txiav lub cable tawm squarely thiab pib dua.
3. Untwist lub conductors thiab kab lawv raws li T568B xim-coded markings. Ntxig cov conductors rau hauv lub connector cap. Lub tsho cable yuav tsum tuaj ze rau ntawm ntug ntawm lub connector nrog me ntsis ntawm cov conductors pom li sai tau. Txwv tsis pub, txiav tawm lub cable squarely thiab pib dua.
4. Yog hais tias ib qho kev sib txuas txuas mus dhau ntawm ntug ntawm lub hau txuas, luas qhov ntau tshaj kom qhov kawg ntawm cov neeg xyuas pib ntws nrog ntug ntawm lub hau txuas.
5. Nias lub hau kom ruaj khov rau ntawm lub hauv paus connector kom txog thaum ob daim snaps ua ke. Siv cov pliers sib koom ua ke los siv lub siab sib npaug thoob plaws lub hau thiab kom ruaj ntseg kev sib txuas, tab sis nco ntsoov tsis txhob tawg cov yas thaum siv lub zog.

   

Nruab tus Connector nyob rau hauv lub vaj huam sib luag

Siv daim kab xev ob sab uas tau muab rau hauv cov khoom siv rov qab los txuas rau hauv qab ntawm lub npov saum npoo ntawm koj lub vaj huam sib luag. Saib cov duab hauv qab no. Saib cov lus piv txwv hauv qab no.

Txuas lub Patch Cable

ERP Feedthrough lossis Sensor IQ
Txuas lub 1 ft thaj cable (N4036) los ntawm qhov chaw-mount connector mus rau sab nraum qab ntawm tus neeg siv interface.

Nco tseg: Lub Sensor IQ qhia saum toj no yog mounted nyob rau hauv ib tug top-feed orientation

ERP Mains Pub

Sab saum toj-feed

1. Route lub 4 ft network thaj cable (N4009) los ntawm ribbon cable qhib nyob rau hauv qab ntawm tus neeg siv interface enclosure, qab lub relay daim npav mounting vaj huam sib luag rau lub surfacemount box.
   • Cov khoom siv muaj xws li cov hlua khi thiab cov hlua khi hlua khi rau hnav cov hlua khi, raws li xav tau.
2. Txuas lub patch cable mus rau qhov chaw-mount lub thawv.
3. Txuas lub patch cable mus rau sab nraum qab ntawm tus neeg siv interface.

   

Hauv qab pub

1. Route 4 ft network thaj cable (N4009) los ntawm lub npov nto-mount, tom qab ntawm daim npav relay mounting vaj huam sib luag, thiab los ntawm cov ribbon cable qhib nyob rau hauv qab ntawm tus neeg siv interface enclosure.
   • Cov khoom siv muaj xws li cov hlua khi thiab cov hlua khi hlua khi rau hnav cov hlua khi, raws li xav tau.
2. Txuas lub patch cable mus rau sab nraum qab ntawm tus neeg siv interface.
3. Txuas lub patch cable mus rau qhov chaw-mount lub thawv.

Cov ntaub ntawv / Cov ntaub ntawv

ECHO Power Control Processor Mk2 Network Termination Kit [ua pdf] Cov neeg siv phau ntawv qhia Fais fab Control Processor Mk2, Network Termination Kit, Power Control Processor Mk2 Network Termination Kit, Termination Kit, PCP-Mk2

Cov ntaub ntawv

• Cov neeg siv phau ntawv