ENGINEERING
Tag kis
Daim ntawv qhia kev teeb tsa
Case controller
Hom EKC 223

Kev txheeb xyuas

Daim ntawv thov

Qhov ntev

Mounting

Cov kab kos duab

Daim ntawv thov	Cov kab kos duab
1
2
3
4

Nco tseg: Fais fab txuas: hlau loj = 0.5 - 1.5 hli 2, max. nruj torque = 0.4 Nm Low voltage teeb liab connectors: hlau loj = 0.15 - 1.5 hli 2, max. zawm torque = 0.2 Nm 2L thiab 3L yuav tsum tau txuas rau tib theem.

Cov ntaub ntawv sib txuas lus

Kev teeb tsa	Kev xaim
EKC 22x maub los tuaj yeem koom ua ke rau hauv Modbus network ntawm RS-485 adapter (EKA 206) siv lub interface cable (080N0327). Yog xav paub ntxiv txog kev teeb tsa thov xa mus rau daim ntawv qhia kev teeb tsa rau EKA 206 - RS485 adapter.

Cov ntaub ntawv technical

Nta	Kev piav qhia
Lub hom phiaj ntawm kev tswj hwm	Kev khiav hauj lwm kub sensing tswj haum rau kev koom ua ke rau hauv kev lag luam cua txias thiab daim ntawv thov tub yees
Kev tsim kho ntawm kev tswj	Incorporated tswj
Fais fab mov	084B4055 - 115 V AC / 084B4056 - 230 V AC 50 / 60 Hz, galvanic cais tawm tsis tshua muaj hluav taws xobtage tswj fais fab mov
Rated zog	Tsawg dua 0.7 W
Cov tswv yim	Sensor inputs, Digital inputs, Programming key Txuas rau SELV txwv zog <15 W
Tso cai hom sensor	NTC 5000 Ohm ntawm 25 ° C, (Beta tus nqi = 3980 ntawm 25/100 ° C - EKS 211) NTC 10000 Ohm ntawm 25 ° C, (Beta tus nqi = 3435 ntawm 25/85 ° C - EKS 221) PTC 990 Ohm ntawm 25 ° C, (EKS 111) Pt1000 (AKS 11, AKS 12, AKS 21)
Qhov tseeb	Kev ntsuas kub: -40 - 105 ° C (-40 - 221 ° F)
	Controller raug: ± 1 K hauv qab -35 ° C, ± 0.5 K ntawm -35 - 25 ° C, ± 1 K siab tshaj 25 ° C
Hom kev ua	1B (relay)
Tso zis	DO1 - Relay 1: 16 A, 16 (16) A, EN 60730-1 10 FLA / 60 LRA ntawm 230 V, UL60730-1 16 FLA / 72 LRA ntawm 115 V, UL60730-1
	DO2 - Relay 2: 8 A, 2 FLA / 12 LRA, UL60730-1 8 A, 2 (2 A), EN60730-1
	DO3 - Relay 3: 3 A, 2 FLA / 12 LRA, UL60730-1 3 A, 2 (2 A), EN60730-1
	DO4 – Relay 4:2 A
Zaub	LED zaub, 3 tus lej, tus lej lej thiab ntau lub cim ua haujlwm, ° C + ° F nplai
Cov xwm txheej ua haujlwm	-10 - 55 ° C (14 - 131 ° F), 90% Rh
Cia tej yam kev mob	-40 - 70 ° C (-40 - + 158 ° F), 90% Rh
Kev tiv thaiv	Pem hauv ntej: IP65 (Gasket integrated) Tom ntej: IP00
Ib puag ncig	Pollution degree II, non-condensing
Overvoltagqeb e	II - 230 V mov version - (ENEC, UL lees paub) III - 115 V mov version - (UL lees paub)
Tiv thaiv kom sov thiab hluav taws	Qeb D (UL94-V0) Kev ntsuas kub rau pob ntsuas ntsuas ntsuas raws li Annex G (EN 60730-1)
EMC qeb	Qeb I
Kev pom zoo	Kev lees paub UL (US & Canada) (UL 60730-1) CE (LVD & EMC Cov Lus Qhia) EAC (GHOST) UKCA UA CMIM ROHS 2.0 Kev pom zoo Hazloc rau cov tub yees hluav taws kub (R290 / R600a). R290 / R600a daim ntawv thov siv kawg ua haujlwm raws li IEC60079-15 cov cai.

Qhia ua haujlwm

Cov nyees khawm nyob rau pem hauv ntej ntawm cov zaub tuaj yeem ua haujlwm nrog luv thiab ntev (3s) nias.

A	Cov xwm txheej qhia: LEDs teeb ntawm ECO / Hmo ntuj hom, txias, defrost thiab kiv cua khiav.
B	Alarm indication: Tswb icon flashes thaum lub tswb.
C	Xovxwm luv =Nrhiav rov qab Ntev nias = pib lub voj voog rub tawm. Zaub yuav qhia "Pod" kom paub meej tias pib.
D	Xovxwm luv = Navigate up Ntev nias = Hloov maub los ON / OFF (teeb r12 Lub ntsiab hloov hauv ON / OFF txoj hauj lwm)
E	Xovxwm luv = Navigate down Ntev nias = Pib defrosting voj voog. Zaub yuav qhia tus lej "-d-" kom paub meej tias pib.
F	Short press = Hloov teeb taw tes Ntev nias = Mus rau cov ntawv qhia zaub mov

Hoobkas rov pib dua

Tus maub los tuaj yeem rov qab mus rau lub Hoobkas teeb tsa los ntawm kev siv cov txheej txheem hauv qab no:

1. Fais fab OFF maub los
2. Khaws "∧" thiab nqis "∨" khawm xub nias thaum rov txuas cov khoom voltage
3. Thaum tus lej "Face" tshwm nyob rau hauv cov zaub, xaiv "yog"

Nco tseg: Kev teeb tsa OEM Hoobkas yuav yog Danfoss Hoobkas chaw lossis tus neeg siv lub Hoobkas teeb tsa yog tias ib qho tau ua. Tus neeg siv tuaj yeem txuag nws qhov chaw raws li OEM Hoobkas teeb tsa ntawm qhov ntsuas o67.

Tso cov lej

Display code	Kev piav qhia
-d-	Lub voj voog defrost tab tom ua tiav
Pod	Lub voj voog kub rub tawm tau pib
Err	Qhov ntsuas kub tsis tuaj yeem tshwm sim vim qhov yuam kev sensor
—	Qhia rau saum cov zaub: Tus nqi parameter tau mus txog max. Txwv
—	Qhia hauv qab ntawm cov zaub: Tus nqi parameter tau mus txog min. txwv
Xauv	Cov zaub keyboard raug kaw
Null	Cov zaub keyboard tau xauv lawm
PS	Tus lej nkag yuav tsum tau nkag mus rau hauv parameter zaub mov
Ax/Ext	Tswb lossis yuam kev code flashing nrog ib txwm temp. nyeem ntawv
OFF	Kev tswj tau nres raws li r12 Main hloov pauv tau teeb tsa OFF
On	Kev tswj tau pib raws li r12 Main hloov pauv tau teeb tsa ON (code qhia hauv 3 vib nas this)
ntsej muag	Tus maub los yog rov pib dua rau lub Hoobkas

Kev taw qhia

Cov ntawv qhia zaub mov parameter yog nkag los ntawm nias qhov "SET" yuam sij rau 3 vib nas this. Yog hais tias ib qho kev tiv thaiv kev tiv thaiv "o05" tau raug txhais cov zaub yuav nug txog kev nkag mus los ntawm kev qhia tus lej "PS". Thaum tus lej nkag tau muab los ntawm tus neeg siv, cov npe parameter yuav nkag mus.

Tau pib zoo

Nrog rau cov txheej txheem hauv qab no koj tuaj yeem pib txoj cai sai heev:

1. Nias lub pob "SET" rau 3 vib nas this thiab nkag mus rau cov ntawv qhia zaub mov (duab yuav qhia "hauv")
2. Nias lub pob "∨" mus rau "tcfg" ntawv qhia zaub mov (duab yuav qhia "tcfg")
3. Nias txoj cai / ">" tus yuam sij qhib cov ntawv qhia zaub mov teeb tsa (duab yuav qhia r12)
4. Qhib "r12 Main hloov" parameter thiab nres tswj los ntawm kev teeb tsa OFF (Xovxwm SET)
5. Qhib "o61 daim ntawv thov hom" thiab xaiv hom ntawv thov xav tau (Nias SET)
6. Qhib "o06 Sensor hom" thiab xaiv qhov kub sensor hom siv (n5 = NTC 5 K, n10 = NTC 10 K, Pct.=PTC, Pt1 = Pt1000) - (Nias "SET").
7. Qhib "o02 DI1 Configuration" thiab xaiv cov haujlwm cuam tshuam nrog cov tswv yim digital 1 (Thov xa mus rau daim ntawv teev npe) - (Nias "SET").
8. Qhib "o37 DI2 Configuration" thiab xaiv cov haujlwm cuam tshuam nrog cov tswv yim digital 2 (Thov xa mus rau daim ntawv teev npe) - (Nias "SET").
9. Qhib qhov "o62 Quick setting" parameter thiab xaiv qhov presetting uas haum nrog daim ntawv thov hauv kev siv (thov xa mus rau lub rooj preset hauv qab no) - (Nias "SET").
10. Qhib "o03 Network chaw nyob" thiab teeb tsa Modbus chaw nyob yog xav tau.
11. Rov qab mus rau qhov ntsuas "r12 Main hloov" thiab teeb tsa hauv "ON" txoj haujlwm pib tswj.
12. Mus los ntawm tag nrho cov npe parameter thiab hloov lub Hoobkas chaw nyob qhov xav tau.

Kev xaiv cov chaw ceev

Kev teeb tsa ceev	1	2	3	4	5	6	7
	Txawb MT Ntuj def. Nres raws sij hawm	Txawb MT El. def. Nres raws sij hawm	Txawb MT El. def. Nres ntawm temp	Txawb LT El. def. Nres ntawm temp	Room MT El. def. Nres raws sij hawm	Room MT El. def. Nres ntawm temp	Room LT El. def. Nres ntawm temp
r00 kev	4 ° C	2 ° C	2 ° C	-24 ° C	6 ° C	3 ° C	-22 ° C
r02 Max txiav tawm	6 ° C	4 ° C	4 ° C	-22 ° C	8 ° C	5 ° C	-20 ° C
r03 Min Txiav tawm	2 ° C	0 ° C	0 ° C	-26 ° C	4 ° C	1 ° C	-24 ° C
A13 Huab cua siab heev	10 ° C	8 ° C	8 ° C	-15 ° C	10 ° C	8 ° C	-15 ° C
Al 4 Lowly Air	-5 ° C	-5 ° C	-5 ° C	-30 ° C	0 ° C	0 ° C	-30 ° C
d01 npe. Txoj kev	Ntuj	Hluav taws xob	Hluav taws xob	Hluav taws xob	Hluav taws xob	Hluav taws xob	Hluav taws xob
d03 Def.lnterval	6 hnu	6 hnu	6 hnu	12 hnu	8 hnu	8 hnu	12 hnu
d10 DefStopSens.	Sijhawm	Sijhawm	S5 Sensor	55 Sensor	Sijhawm	S5 Sensor	S5 Sensor
o02 DI1 Config.					Qhov rooj fct.	Qhov rooj fct.	Qhov rooj fct.

Programming key

Programming controller nrog Mass Programming Key (EKA 201)

1. Fais fab rau tus maub los. Xyuas kom tseeb tias cov controllers txuas nrog lub mains.
2. Txuas lub EKA 201 mus rau tus maub los uas siv cov kev tswj hwm kev sib txuas ntawm cable.
3. EKA 201 yuav cia li pib cov txheej txheem programming.

Daim ntawv teev npe

Code	Phau ntawv luv luv	Min.	Max.	2	Chav tsev	R/W	EKC 224 UAS.
							1	2	3	4
CFg	Kev teeb tsa
r12 ua	Lub ntsiab hloov (-1 = kev pabcuam / 0 = OFF / 1 = 0N)	-1	1	0		R/W	*	*	*	*
o61¹)	Xaiv hom kev thov (1) API: Cmp / Def / Ntxuam / Teeb (2) AP2: Cmp / Def / Ntxuam / Tswb (3) AP3: Cmp / Al / F ib qho / Teeb (4) AP4: Kub / Tswb / Teeb	1	4			R/W	*	*	*	*
o06¹)	Sensor hom xaiv (0) n5= NTC 5k, (1) n10 = NTC 10k, (2)Pt = Pt1003, (3) Pct. = PTC 1000	0	3	2		R/W	*	*	*	*
o02¹)	Dell configuration (0) ntawm = tsis siv (1) SD = xwm txheej, (2) doo-qhov rooj muaj nuj nqi, (3) do = qhov rooj tswb, (4) SCH = lub ntsiab hloov, (5) nigh = hnub / hmo ntuj hom, (6) rd = reference displacement (7) EAL = sab nraud tswb, (8) def.= defrost, (9) Pod = rub kuv nqis, (10) Sc = condenser sensor	0	10	0		R/W	*	*	*	*
037¹	DI2 configuration (0) ntawm = tsis siv (1) SD = xwm txheej, (2) doo-qhov rooj muaj nuj nqi, (3) do = qhov rooj tswb, (4) SCH = lub ntsiab hloov, (5) nigh = hnub / hmo ntuj hom, (6) sled = refence hloov chaw (7) EAL = sab nraud tswb, (8) def.= defrost, (9) Pod = rub down	0	9	0		R/W	*	*	*	*
o62¹)	Ceev presetting ntawm thawj parameters 0 = Tsis siv 1 = MT, Ntuj defrost, nres raws sijhawm 2 = MT, El defrost, nres ntawm lub sijhawm 3 = MT, El defrost, nres ntawm temp. 4 = LT, El defrost nres ntawm temp. 5 = Chav, MT, El defrost, nres ntawm lub sij hawm 6 = Chav, MT, El defrost, nres ntawm temp. 7 = Chav, LT, El defrost, nres ntawm temp.	0	7	0		RIW	*	*	*
o03¹)	Network chaw nyob	0	247	0		R/W	*	*	*	*
r-	Thermostat
r00 ua	Qhov ntsuas kub	r03 ua	r02 ua	2.0	°C	R/W	*	*	*	*
r01 ua	Sib txawv	0.1	20.0	2.0	K	R/W	*	*	*	*
r02 ua	Max. kev txwv ntawm kev teeb tsa	r03 ua	105.0	50.0	°C	R/W	*	*	*	*
r03 ua	Min. kev txwv ntawm kev teeb tsa	—40.0	r02 ua	—35.0	°C	R/W	*	*	*	*
r04 ua	Kev kho ntawm cov zaub qhov ntsuas kub nyeem ntawv	—10.0	10.0	0.0	K	R/W	*	*	*	*
r05 ua	Chav ntsuas kub rC / ° F)	0/C	1 / F	0/C		R/W	*	*	*	*
r09 ua	Kho lub teeb liab los ntawm Sair sensor	—20.0	20.0	0.0	°C	R/W	*	*	*	*
r12 ua	Lub ntsiab hloov (-1 = kev pabcuam / 0 = OFF / 1 = 0N)	-1	1	0		R/W	*	*	*	*
r13 ua	Kev xaav ntawm kev siv thaum hmo ntuj	—50.0	50.0	0.0	K	R/W	*	*		*
r40 ua	Thermostat reference displacement	—50.0	20.0	0.0	K	R/W	*	*	*	*
r96 ua	Lub sijhawm rub-down	0	960	0	min	R/W	*	*	*
r97 ua	Rub-down txwv kub	—40.0	105.0	0.0	°C	R/W	*	*	*
A-	Tswb nqis
A03	Ncua rau kub tswb (luv)	0	240	30	min	R/W	*	*	*	*
Al2	Ncua rau kub tswb thaum rub down (ntev)	0	240	60	min	R/W	*	*	*	*
A13	Lub tswb txwv siab	—40.0	105.0	8.0	°C	R/W	*	*	*	*
A14	Tsawg tswb txwv	—40.0	105.0	—30.0	°C	R/W	*	*	*	*
A27	Alarm ncua Dll	0	240	30	min	R/W	*	*	*	*
A28	Tswb ncua DI2	0	240	30	min	R/W	*	*	*	*
A37	Tswb txwv rau condenser kub tswb	0.0	200.0	80.0	°C	R/W	*	*	*
A54	Txwv rau condenser thaiv lub tswb thiab comp. Nres	0.0	200.0	85.0	°C	R/W	*	*	*
A72	Voltage kev tiv thaiv pab	0 / Nr	1/Yog	0 / Nr		R/W	*	*	*
A73	Yam tsawg kawg nkaus txiav-hauv voltage	0	270	0	Volt	R/W	*	*	*
A74	Yam tsawg kawg nkaus txiav tawm voltage	0	270	0	Volt	R/W	*	*	*
A75	Maximum txiav-hauv voltage	0	270	270	Volt	R/W	*	*	*
d—	Luas
d 01 ua	Txoj kev Defrost (0) tsis yog = Tsis yog, (1) tsis = Ntuj, (2) E1 = Hluav taws xob, (3) gas = Kub gas	0	3	2		R/W	*	*	*
d 02 ua	Defrost nres kub	0.0	50.0	6.0	°C	R/W	*	*	*
d 03 ua	Lub sijhawm nruab nrab ntawm defrost pib	0	240	8	teev	R/W	*	*	*
d 04 ua	Max. lub sij hawm defrost	0	480	30	min	R/W	*	*	*
d 05 ua	txiv qaub offset rau pib ntawm thawj defrost thaum pib	0	240	0	min	R/W	*	*	*
d 06 ua	Tshem tawm lub sijhawm	0	60	0	min	R/W	*	*	*
d 07 ua	Ncua rau kiv cua pib tom qab defrost	0	60	0	min	R/W	*	*	*
d 08 ua	Ntxuam pib kub	- 40.0 Nws	50.0	- 5.0 Nws	°C	R/W	*	*	*
d 09 ua	Ntxuam ua haujlwm thaum defrost	0 / Tawm	1/ Nws	1/Nws		R/W	*	*	*
d 10″	Defrost sensor (0 = sij hawm, 1 = Sair, 2 = 55)	0	2	0		R/W	*	*	*
d 18 ua	Max. comp. runtime ntawm ob defrosts	0	96	0	teev	R/W	*	*	*
d 19 ua	Defrost ntawm kev thov - 55 qhov kub thiab txias tso cai hloov pauv thaum lub caij Frost build-up. Ntawm cov nroj tsuag hauv nruab nrab xaiv 20 K (= tawm)	0.0	20.0	20.0	K	R/W	*	*	*
d 30 ua	Defrost ncua tom qab rub-down (0 = OFF)	0	960	0	min	R/W	*	*	*
F—	Ntxuam
F1	Ntxuam ntawm nres ntawm compressor (0) FFC = Ua raws li comp., (1) Foo = ON, (2) FPL = Ntxuam Pulsing	0	2	1		R/W	*	*	*
F4	Ntxuam nres kub (55)	- 40.0 Nws	50.0	50.0	°C	R/W	*	*	*
F7	Ntxuam pulsing ON cycle	0	180	2	min	R/W		*	*
F8	Ntxuam pulsing OFF voj voog	0	180	2	min	R/W	*	*	*
c—	Compressor
c01 ua	Min. ON-lub sijhawm	0	30	1	min	R/W	*	*	*
c02 ua	Min. OFF-lub sijhawm	0	30	2	min	R/W	*	*	*
c04 ua	Compressor OFF ncua ntawm lub qhov rooj qhib	0	900	0	sec	R/W	*	*	*
c70 ua	Zero hla kev xaiv	0 / Nr	1/Yog	1/Yog		R/W	*	*	*
o—	Lwm yam
o01 ua	Kev ncua ntawm cov zis thaum pib	0	600	10	sec	R/W	*	*	*	*
o2"	DI1 configuration (0) oFF = tsis siv (1) Sdc = xwm txheej, (2) doo = qhov rooj muaj nuj nqi, (3) doA = qhov rooj tswb, (4) SCH = lub ntsiab hloov (5) nig=hnub/hmo mode, (6) rFd=reference displacement, (7) EAL=external tswb, (8) dEF=clefrost, (9) Pud = rub down, (10) Sc = condenser sensor	0	10	0		R/W	*	*	*	*
o3"	Network chaw nyob	0	247	0		R/W	*	*	*	*
5	Nkag mus code	0	999	0		R/W	*	*	*	*
006 "	Sensor hom xaiv (0) n5 = NTC 5k, (1) n10 = NTC 10k, (2) Pt = Pt1000, (3) Ptc = PTC 1000	0	3	2		R/W	*	*	*	*
o15 ua	Zaub daws teeb meem (0) 0.1, (1) 0.5, (2) 1.0	0	2	0		R/W	*	*	*	*
o16 ua	Max. standby txiv qaub tom qab kev sib koom ua ke defrost	0	360	20	min	R/W	*	*	*
o37 ib.	Dl? kev teeb tsa (0) ntawm = tsis siv (1) Sack = xwm txheej, (2) doo = qhov rooj muaj nuj nqi, (3) do = qhov rooj tswb, (4) SCH = lub ntsiab hloov, (5) nigh = hnub / hmo ntuj hom, (6) rd = ref Terence hloov chaw, (7) EAL = sab nraud tswb, (8) def.=def ran, (9) Pod = rub kuv down	0	9	0		R/W	*	*	*	*
o38 ua	Configuration ntawm lub teeb muaj nuj nqi (0) on = ib txwm nyob rau, (1) Dan = hnub / hmo (2) doo=raws li qhov rooj ua, (3) nets = Network	0	3	1		R/W	*		*	*
o39 ua	Lub teeb tswj ntawm lub network (tsuas yog o38 = 3.NET))	0 / Tawm	1/ Nws	1/Nws		R/W	*		*	*
061 "	Xaiv hom kev thov (1) API: Cmp / Def / Ntxuam / Teeb (2) AP2: Cmp/Def/Fan/A 6 rim (3) AP3: Cmp / Al / Ntxuam / Teeb (4) AP4: Kub / Tswb / Teeb	1	4	1		R/W	*	*	*	*
o62 ua	Ceev presetting ntawm thawj tsis 0 = Tsis siv 1 = MT, Ntuj defrost, nres ntawm lub sij hawm 2 = MT, El defrost, nres ntawm lub sij hawm 3 = MT, El defrost, nres ntawm temp. 4 = LT, El defrost nres ntawm temp 5 = Chav, MT, El defrost, nres ntawm lub sij hawm 6 = Chav, MT, El defrost, nres ntawm temp. 7 = Chav, LT, El defrost, nres ntawm temp.	0	7	0		R/W	*	*	*
67	Hloov cov controllers Hoobkas nqis nrog rau cov chaw tam sim no	0 / Nr	1/Yog	0 / Nr		R/W	*	*	*	*
91	Tso rau ntawm defrost (0) Cua = Sari kub / (1) Fret = khov kub / (2) -drvds yog tso tawm	0	2	2		R/W	*	*	*
P—	Polarity
P75	Invert tswb relay (1) = Invert relay nkaus	0	1	0		R/W	*	*	*
P76	Keyboard xauv qhib	0 / Nr	1/Yog	0 / Nr		R/W	*	*	*	*
ua-	Kev pabcuam
ua 00	Tswj lub xeev 50: Ib txwm, 51: Wart tom qab defrosting. 52: Min ON timer, 53: Min OFF timer, 54: Drip oft 510: r12 Main switch set OFF, 511: Thermostat cut-out 514: Defrosting, $15: Ntxuam ncua, 517: Qhov rooj qhib, 520: Thaum muaj xwm ceev txias, 525 : Manual control, 530: Pulldown cycle, 532: Fais fab mus ncua, S33: Cua sov	0	33	0		R	*	*	*	*
ua 01	Sari Cua kub	- 100.0 Nws	200.0	0.0	°C	R	*	*	*	*
ua 09	S5 Evaporator kub	- 100.0 Nws	200.0	0.0	°C	R	*	*	*	*
ua 10	Status ntawm DI1 input	0 / Tawm	1/ Nws	0 / Tawm		R	*	*	*	*
ua 13	Hmo ntuj mob	0 / Tawm	1/ Nws	0 / Tawm		R	*	*	*	*
ua 37	Status ntawm DI2 input	0 / Tawm	1/ Nws	0 / Tawm		R	*	*	*	*
ua 28	Kev siv ntsuas kub tiag tiag	- 100.0 Nws	200.0	0.0		R	*	*	*	*
ua 58	Compressor / Kua kab solenoid valve	0 / Tawm	1/ Nws	0 / Tawm		R	*	*	*
ua 59	Ntxuam relay	0 / Tawm	1/ Nws	0 / Tawm		R	*	*	*
ua 60	Defrost relay	0 / Tawm	1/ Nws	0 / Tawm		R	*	*
ua 62	Tswb relay	0 / Tawm	1/ Nws	0 / Tawm		R		*	*	*
ua 63	Lub teeb relay	0 / Tawm	1/ Nws	0 / Tawm		R	*		*	*
LSO	Firmware version readout					R	*	*	*	*
ua 82	Controller code no.					R	*	*	*	*
ua 84	Thaum tshav kub kub relay	0 / Tawm	1/ Nws	0 / Tawm		R				*
U09	Sc Condenser kub	- 100.0 Nws	200.0	0.0		R	*	*	*

1) Parameter tsuas yog hloov tau thaum lub parameter r12 Main hloov nyob rau hauv OFF txoj hauj lwm.

tswb codes

Nyob rau hauv ib qho xwm txheej ntawm lub tswb, cov zaub yuav hloov pauv ntawm kev nyeem ntawv ntawm qhov ntsuas huab cua tiag tiag thiab nyeem tawm ntawm lub tswb cim ntawm lub tswb nrov.

Code	Tswb	Kev piav qhia	Network tswb
E29	Sari sensor yuam kev	Cua kub sensor yog qhov tsis xws luag lossis kev sib txuas hluav taws xob poob	- Sari yuam kev
E27	Def sensor yuam kev	S5 Evaporator sensor yog qhov tsis xws luag lossis kev sib txuas hluav taws xob poob	- S5 yuam kev
E30	SC sensor yuam kev	Sac Condenser sensor yog qhov tsis xws luag lossis kev sib txuas hluav taws xob poob	- Sac yuam kev
A01	Kub tswb tswb	Cua kub hauv txee siab dhau lawm	- Lub tswb nrov
A02	Tsawg temp tswb	Huab cua kub hauv txee yog tsawg dhau	—Low t. Tswb
A99	High Volt tswb	Muab voltage siab dhau (kev tiv thaiv compressor)	—High Voltage
TIAB SA 1	Tsawg Volt tswb	Muab voltage tsawg dhau (kev tiv thaiv compressor)	— Low Voltage
A61	Condenser tswb	Condenser temp. siab dhau lawm – xyuas cov cua ntws	— Cond Alarm
A80	Cond. thaiv lub tswb	Condenser temp. siab dhau lawm – Phau ntawv rov pib lub tswb xav tau	- Cond Thaiv
A04	Qhov rooj tswb	Qhov rooj tau qhib ntev dhau lawm	-Qhov rooj tswb
A15	DI Tswb	Lub tswb sab nraud los ntawm DI input	- DI tswb
A45	Standby tswb	Kev tswj tau raug nres los ntawm "r12 Main hloov"	- Standby hom

1) Lub condenser thaiv lub tswb tuaj yeem rov pib dua los ntawm kev teeb tsa r12 Main hloov OFF thiab ON dua lossis los ntawm kev tso lub hwj chim ntawm tus maub los.

Danfoss A/S
Climate Solutions « danfoss.com « +45 7488 2222

Txhua yam ntaub ntawv, suav nrog, tab sis tsis txwv rau cov ntaub ntawv ntawm kev xaiv cov khoom, nws daim ntawv thov lossis kev siv, cov khoom tsim, qhov hnyav, qhov ntev, muaj peev xwm lossis lwm yam ntaub ntawv hauv cov khoom siv hauv phau ntawv, cov lus piav qhia, kev tshaj tawm, thiab lwm yam thiab seb puas muaj nyob rau hauv kev sau ntawv , hais lus, hauv tshuab hluav taws xob, hauv online lossis los ntawm kev rub tawm, yuav tsum suav hais tias yog cov ntaub ntawv, thiab tsuas yog khi tau yog tias thiab rau qhov twg, cov ntaub ntawv qhia meej yog ua nyob rau hauv cov lus hais lossis kev txiav txim pom zoo. Danfoss tsis tuaj yeem lees txais ib lub luag haujlwm rau qhov ua yuam kev hauv phau ntawv teev npe, daim ntawv qhia, yeeb yaj kiab thiab lwm yam khoom siv.
Danfoss tseg txoj cai los hloov nws cov khoom yam tsis muaj ntawv ceeb toom. Qhov no kuj siv tau rau cov khoom xaj tab sis tsis xa tawm yog tias cov kev hloov pauv no tuaj yeem ua yam tsis muaj kev hloov pauv rau daim ntawv, haum lossis ua haujlwm ntawm cov khoom.
Tag nrho cov cim lag luam hauv cov khoom no yog cov cuab yeej ntawm Danfoss A/S lossis Danfoss pawg tuam txhab. Danfoss thiab Danfoss logo yog cov cim lag luam ntawm Danfoss A / S. Txhua txoj cai.

AN432635050585en-000201
© Danfoss | Huab cua daws | 2023.05 Nws

Cov ntaub ntawv / Cov ntaub ntawv

	Danfoss EKC 223 Case Controller [ua pdf] Daim ntawv qhia kev teeb tsa EKC 223, 084B4053, 084B4054, Case Controller, EKC 223 Case Controller
	Danfoss EKC 223 Case Controller [ua pdf] Daim ntawv qhia kev teeb tsa EKC 223 Case Controller, EKC 223, Case Controller, Tus Tswj

Cov ntaub ntawv

• Cov neeg siv phau ntawv