DGM02
Phau ntawv qhia ntaus ntawv

NTA

• SERVER GATEWAY
• POWER INput: 12-24-48 Vdc
• ETHERNET BUS: 10/100Mbit
• MODBUS BUS: ntau yam baud tus nqi 9600 - 250000
• DMX BUS: 1 ntug DMX512
• DALI BUS: 1 DALI kab - kev sib xyaw DALI tsheb npav fais fab mov

⇢ Rau phau ntawv qhia ib txwm hloov tshiab, sab laj nrog peb webqhov chaw: www.dalcnet.com lossis QR ntawm cov khoom

https://qr.dalcnet.com/q/DGM02-1248

TECHNICAL SPECIFICATIONS

		DGM02-1248
Muab voltage		12 / 24 / 48 Vdc
Input tam sim no		550mA max
Nominal zog1		ntaus ntawv		max
	@12v	160 mA (1.92 W)		550 mA (6.60 W)
	@24v	80 mA (1.92 W)		260 mA (6.24 W)
	@48v	50 mA (2.40 W)		150 mA (7.20 W)
POE1		yam 2	ntaus ntawv			max
	@48v	40 mA (1.9 W)	100 mA (4.65 W)			170 mA (7.9 W)
CUA XWB		10 / 100 Mbit baseT TUG DUPLEX AUTO NEGOTIATION
MODBUS RTU		RS-485, BAUD RATE ntawm 9600 txog 250000
DMX		512 CHANNEL
DALI		64 ADDRESS Integrated fais fab mov: 200mA / 16Vdc			Guaranteed tsheb npav tam sim no = 200mA
					Max tam sim no = 250mA
Cia kub		Min: -40 ° C ÷ Max + 60 ° C
Ambient kub		Min: -40 ° C ÷ Max + 60 ° C
Casing khoom		Yas
Ntim units (pieces / units)		1 XNUMX npz
Neeg kho tshuab qhov ntev		72 x 92 x 62 mm
Pob qhov ntev		85 x 124 x 71 mm
Qhov hnyav		100 g

REFERENCE STANDARDS

TS EN 55035	Electromagnetic compatibility ntawm cov khoom siv multimedia - Kev tiv thaiv kev tiv thaiv
TS EN 55032	Electromagnetic compatibility ntawm multimedia khoom - Emission Requirements
TS EN IEC 62368-1	Cov khoom siv suab / yees duab, xov xwm thiab kev sib txuas lus - Ntu 1: Cov kev cai nyab xeeb
TS EN IEC 62368-1 / A11	Cov khoom siv suab / yees duab, xov xwm thiab kev sib txuas lus - Ntu 1: Cov kev cai nyab xeeb
TS EN IEC 62368-1 / AC	Cov khoom siv suab / yees duab, xov xwm thiab kev sib txuas lus - Ntu 1: Cov kev cai nyab xeeb
IEC 62386-101 ED.2	TS EN 101-XNUMX Cov chaw nyob tau teeb pom kev zoo - Ntu XNUMX: Kev xav tau dav dav - Cov khoom siv hauv lub cev
IEC 62386-103 ED.2	TS EN 103-XNUMX Digital addressable lighting interface - Ntu XNUMX: Cov kev cai dav dav - Tswj cov khoom siv
IEC 62386-205 ED.23	TS EN ISO 205 Cov teeb pom kev zoo nyob rau hauv lub teeb pom kev zoo - Ntu XNUMX: Cov cai tshwj xeeb rau kev tswj cov iav - Cov khoom siv voltage maub los rau incandescent lamps (khoom siv hom 4)
IEC 62386-207 ED.24	TS EN ISO 207-6 Digital addressable teeb pom kev zoo interface - Ntu XNUMX: Cov kev cai tshwj xeeb rau kev tswj cov iav - LED modules (khoom siv hom XNUMX)
IEC 62386-209 ED.25	TS EN ISO 209-8 Digital addressable teeb pom kev zoo interface - Ntu XNUMX: Cov kev cai tshwj xeeb rau kev tswj cov iav - Kev tswj xim (ntau hom XNUMX)
ANSI E1.11	Kev Lom Zem Technology - USITT DMX512-A Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories
-	MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1b

QHIA DIAGRAM

CEEB TOOM:
Ib txwm tshem tawm cov khoom siv hluav taws xob loj (230Vac) thaum lub sijhawm teeb tsa lossis kev saib xyuas cov khoom. Tsis txhob txuas lossis txiav cov khoom siv hluav taws xob rau DC IN terminals yog tias Lub Hwj Huam Hluav Taws Xob tau qhib.
Yog tias cov khoom siv los ntawm PoE nco ntsoov tias PSE (Power Sourcing Equipment) raug txiav.
Tsis txhob txuas lossis txiav cov khoom siv hluav taws xob los ntawm PoE yog tias PSE tau qhib.

 

PINOUT CONNECTORS

PIN OUT PLUG-IN CONNECTORS
1	DC IB			Vin +
2				Vin-
3				Vin +
4				Vin-
5	HWV 1	C	TSI 1	COM
6		B		D-
7		A		D+
8	HWV 2	C	TSI 2	COM
9		B		D-
10		A		D+
11	DALI			DA +
12				DA-

PIN	RJ45 / A (RJ45 / B hla)	RJ45 / B (RJ45 / A hla)
1	Dawb / Ntsuab	Dawb / Txiv kab ntxwv
2	Ntsuab	Txiv kab ntxwv
3	Dawb / Txiv kab ntxwv	Dawb / Ntsuab
4	Xiav	Xiav
5	Dawb / xiav	Dawb / xiav
6	Txiv kab ntxwv	Ntsuab
7	Dawb / Xim av	Dawb / Xim av
8	Xim av	Xim av

ONBOARD LED 

LED	FUNCTION	ON	BLINK	OFF
LED1 (Thawj ntawm sab laug)	Ethernet	Wired thiab sib txuas lus ntawm ethernet	Txuas nrog ethernet	Tsis muaj kab
LED2	BUS1 (RTU / DMX)	Txuas nrog kev sib txuas lus	Txuas nrog tsis muaj kev sib txuas lus (tsuas yog RTU)	BUS1 tsis tau qhib
LED3	BUS2 (DMX/RTU)	Txuas nrog kev sib txuas lus	Txuas nrog tsis muaj kev sib txuas lus (tsuas yog RTU)	BUS2 tsis tau qhib
LED4 (Thawj ntawm sab xis)	BUS DALI	Txuas nrog kev sib txuas lus	Txuas nrog tsis muaj kev sib txuas lus	DALI BUS tsis qhib. BUS fais fab tuag

RESET BUTTON
Ntaus Restart: Nias lub pob pib dua li 2 vib nas this.
Lub Hoobkas teeb tsa: Nias lub pob pib dua li 2 vib nas this, tag nrho 4 lub teeb liab LEDs yuav tsum teeb tsa los ntawm sab xis mus rau sab laug.
POWER OVER ETHERNET (POE)
Cov cuab yeej muaj peev xwm ua haujlwm nrog PoE fais fab mov.
Txhawm rau ua kom lub zog siv hluav taws xob no, tsuas yog txav mus rau PoE selector upwards.

CEEB TOOM: Ua ntej txuas lub cuab yeej mus rau PoE hloov lossis lub twj tso kua mis, txiav tawm lwm lub zog los ntawm DC IN + thiab DC IN-terminals.

NCO TSEG KAWM NTAWV

INSTALLATION:

• CEEB TOOM: Cov khoom yuav tsuas yog txuas thiab nruab los ntawm cov neeg ua haujlwm tsim nyog. Tag nrho cov kev cai, kev cai lij choj, thiab cov cai hauv tsev uas siv tau hauv cov teb chaws yuav tsum tau ua raws. Kev teeb tsa tsis raug ntawm cov khoom tuaj yeem ua rau kev puas tsuaj rau cov khoom thiab cov LEDs txuas nrog.
• Cov khoom yuav tsum tau muab tso rau hauv lub switchgear / controlgear txee thiab / los yog junction box tiv thaiv overvoltage.
• Cov khoom yuav tsum tau muab ntsia rau hauv txoj hauj lwm ntsug lossis kab rov tav nrog daim ntawv lo / sab saum toj npog sab saum toj lossis ntsug. Lwm txoj haujlwm tsis raug tso cai. Txoj hauj lwm hauv qab yog tsis tso cai (daim ntawv lo / sab saum toj npog ntsej muag).
•  Khaws cais 230Vac (LV) circuits thiab tsis SELV Circuit Court los ntawm kev nyab xeeb ntxiv qis voltage (SELV) Circuit Court thiab los ntawm kev sib txuas nrog cov khoom no. Nws yog txwv tsis pub mus txuas rau txhua qhov laj thawj, ncaj qha lossis tsis ncaj, 230Vac mains voltage rau cov khoom lag luam (terminal block ntawm BUS suav nrog).
• Cov khoom yuav tsum tau dissipated kom raug.
• Kev siv cov khoom nyob rau hauv ib puag ncig hnyav tuaj yeem txwv lub zog tso zis.
• Yog hais tias cov cables ua rau lub suab nrov nrov, nruab ib lub ferrite core ntawm ethernet cable los ntawm kev ua 2 lem. Nws raug nquahu kom siv ferrite nrog cov yam ntxwv hauv qab no: Wurth 74271622.
• Kev saib xyuas yuav tsum tau ua los ntawm ib tus kws tshaj lij hluav taws xob tsim nyog ua raws li cov cai tam sim no.

POWER SUPPLY

• Siv cov khoom siv hluav taws xob SELV nkaus xwb uas muaj qhov txwv tam sim no rau cov khoom siv hluav taws xob, kev tiv thaiv luv luv thiab lub zog yuav tsum tau ua kom raug.
  Nyob rau hauv cov ntaub ntawv ntawm cov khoom siv hluav taws xob nruab nrog hauv av terminals, nws yog qhov yuav tsum tau txuas TAG NRHO cov ntsiab lus tiv thaiv hauv av (PE = Protection Earth) mus rau lub ntiaj teb tiv thaiv kom raug thiab muaj ntawv pov thawj.
• Nws raug nquahu kom siv cov khoom siv hluav taws xob nrog cov khoom siv hluav taws xob tsawg "LPS" <15W. Nws raug nquahu kom siv HDR-15-12 fais fab mov.
• Kev sib txuas cables ntawm qhov tsawg heev voltage lub hwj chim qhov chaw thiab cov khoom yuav tsum tau ua kom zoo dimension thiab yuav tsum tau insulated los ntawm ib qho kev thaiv los yog ib feem ntawm non-SELV voltage. Nws raug nquahu kom tsis txhob tshaj 10m ntawm kev sib txuas ntawm cov khoom siv hluav taws xob thiab cov khoom siv. Siv ob chav insulated cables.
• Dimension lub hwj chim ntawm lub hwj chim mov nyob rau hauv relation mus nqus cov cuab yeej. Nyob rau hauv cov ntaub ntawv lub hwj chim mov yog oversized piv rau lub siab tshaj plaws absorbed tam sim no, ntxig ib tug tiv thaiv tawm tsam tshaj tam sim no ntawm lub hwj chim mov thiab lub ntaus ntawv.
• Ib txwm tshem tawm cov khoom siv hluav taws xob loj (230Vac) thaum lub sijhawm teeb tsa lossis kev saib xyuas cov khoom. Tsis txhob txuas lossis txiav cov khoom siv hluav taws xob rau DC IN terminals yog tias Lub Hwj Huam Hluav Taws Xob tau qhib.
  Yog tias cov khoom siv los ntawm PoE nco ntsoov tias PSE (Power Sourcing Equipment) raug txiav. Tsis txhob txuas lossis txiav cov khoom siv hluav taws xob los ntawm PoE yog tias PSE tau qhib.

Lus txib

•  Qhov ntev ntawm cov cables txuas ntawm cov lus txib hauv zos (NO Push khawm, 0-10V, 1-10V, Potentiometer lossis lwm yam) thiab cov khoom yuav tsum tsawg dua 10m. Cov kab hluav taws xob yuav tsum tau ua kom zoo thiab yuav tsum tau insulated los ntawm ib qho tsis-SELV thaiv lossis voltage. Nws raug nquahu kom siv ob chav insulated cables, yog tias pom tau tias tsim nyog, kuj tiv thaiv.
• Qhov ntev thiab hom cables txuas rau lub tsheb npav (DMX, Modbus, DALI, Ethernet lossis lwm yam) yuav tsum ua raws li cov lus qhia tshwj xeeb ntawm cov kev cai thiab cov kev cai hauv kev quab yuam. Lawv yuav tsum tau insulated los ntawm tej yam uas tsis yog-SELV thaiv los yog voltage ntu. Nws raug nquahu kom siv ob chav insulated cables.
• TAG NRHO cov cuab yeej thiab tswj cov teeb liab txuas nrog cov lus txib hauv zos "NO Push button", lawv yuav tsum tsis txhob muab txhua hom voltage.
• TAG NRHO cov cuab yeej thiab tswj cov teeb liab txuas ntawm BUS (DMX512, Modbus, DALI, Ethernet lossis lwm yam) thiab rau cov lus txib hauv zos (Tsis muaj khawm khawm lossis lwm yam) yuav tsum yog hom SELV (cov cuab yeej txuas yuav tsum yog SELV lossis muab SELV teeb liab).
• Tag nrho cov xaim mus thiab los ntawm cov khoom yuav tsum los ntawm sab hauv lub tsev installation. Nws tsis raug tso cai los txuas cov kab hluav taws xob los ntawm sab nraud lub tsev teeb tsa rau cov khoom.

SERVER GATEWAY

Lub DGM02 ntaus ntawv hloov cov ntaub ntawv ntawm ntau yam kev cai hauv lub sijhawm. Nws tuaj yeem tau txais cov ntaub ntawv los ntawm ethernet network thiab los ntawm ib lossis ntau lub tsheb npav (tsim raws li cov npav txais tos), xa thiab hloov mus rau ethernet network
thiab cov tsheb npav configured li kis tau tus mob.
Lub 512 raws ntawm qhov tsis yog kis tau tag nrho ntawm lub npav DMX512A.
Ntawm DALI tsheb npav thawj 64 channel ntawm qhov tsis yog kis tau raws li 64 qhov chaw nyob luv, lossis thawj 16 channel raws li 16 pawg chaw nyob, lossis 1 channel raws li kev tshaj tawm, tsuas yog mus rau cov nodes uas hloov tus nqi.
Nws tseem tuaj yeem tswj tau DALI DT4 / DT6 / DT8-RGBW / DT8-TW cov khoom siv los ntawm Telnet cov lus txib tshwj xeeb.
Thawj 480 channel ntawm qhov tsis yog kis ntawm MODBUS RTU tsheb npav mus rau 80 Modbus li (ID 1..80) ntawm 6 sau npe txhua.
Los ntawm ib qho chaw tswj hwm uas muaj kev sib txuas Ethernet nws tuaj yeem tswj tau tag nrho ntawm 512 qib ntawm lub teeb siv thiab tswj cov khoom siv sib txawv (DMX512A, DALI, MODBUS) yam tsis tas yuav tsum paub meej txog kev ua haujlwm ntawm cov txheej txheem txheeb ze.

LUB TSEV

NTAUS PEEV XWM
Hauv qhov "HOME" screen nws tuaj yeem ua tau view cov ntaub ntawv ntawm lub cuab yeej siv xws li:
Dashboard version, Firmware version, TCP / IP pawg version.
Ntawm nplooj ntawv no koj tuaj yeem xaiv cov ntu hauv qab no:

• LOGOUT, tawm ntawm qhov Web Server ntawm lub cuab yeej siv.
• MENU ', los ntawm txhaj rau ntawm cov ntawv qhia pop-up koj tuaj yeem nkag mus rau nplooj ntawv teeb tsa lub cuab yeej.
  o BUS seem: seem no muaj cov nplooj ntawv rau kev tswj cov txheej txheem, xws li DALI, DMX thiab MODBUS, thiab tswj cov cuab yeej txuas nrog DALI network;
  o SETTINGS Section: tshooj no muaj cov nplooj ntawv rau kev teeb tsa tus IP chaw nyob thiab teeb tsa lub network thiab BUS raws tu qauv.
  WEB SIB LED INFO
• STEADY GREEN: kev sib txuas lus yog nquag
• BLINKING YELLOW: tsis muaj kev sib txuas lus ntawm BUS lossis BUS tsis qhib

WEB INTERFACE

Rau kev saib xyuas thiab teeb tsa, Gateway muab a web interface nkag tau los ntawm tus browser ntawm tus IP chaw nyob ntawm lub cuab yeej (default IP 192.168.1.4).
Los ntawm txhaj rau cov ntawv qhia zaub mov saum toj kawg nkaus, koj tuaj yeem ua tau view cov kev teeb tsa ntaus ntawv (tsuas yog siv tau rau Admin cov neeg siv):

• Raws: nyob rau hauv nplooj ntawv no nws muaj peev xwm teeb tsa qhov dimming qhov tseem ceeb ntawm cov channel nrog cov txheeb ze fader (tsis pom yog nyob rau hauv DALI CONFIG hom);
• Kev teeb tsa tsheb npav: hauv nplooj ntawv no nws tuaj yeem teeb tsa qhov chaw rau txhua lub tsheb npav ntawm DGM02;
• Dali ntiaj teb no nqis: nyob rau hauv nplooj ntawv no nws muaj peev xwm mus configure cov chaw rau DALI tsheb npav (hloov tau tsuas yog nyob rau hauv DALI CONFIG hom);
• DALI Config: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov khoom siv DALI, nyob rau lawv thiab muab kev koom tes rau pawg (tsis pom yog nyob rau hauv DALI CONTROLLER hom);
• DALI maub los: ntawm nplooj ntawv no tsuas yog ua tau view qhov chaw nyob DALI cov khoom siv thiab lawv cov koom nrog hauv pawg (tsis pom yog nyob hauv DALI CONFIG hom);
• DMX512 Ntiaj Teb Chaw: hauv nplooj ntawv no nws tuaj yeem teeb tsa lub sijhawm teeb tsa DMX512 (tsis pom yog nyob hauv DALI CONFIG hom lossis RS485 Bus tsis qhib);
• RS485: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw xa ntawv ceev ntawm RS485 pob ntawv (tsis pom yog tias hauv DALI CONFIG hom lossis RS485 Bus tsis qhib);
• MODBUS Master: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw xa tus tswv MODBUS RTU pob ntawv (tsis pom yog hauv DALI CONFIG hom lossis yog tus tswv MODBUS RTU BUS tsis qhib);
• MODBUS qhev: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw xa cov MODBUS RTU qhev pob ntawv (tsis pom yog nyob rau hauv DALI CONFIG hom lossis yog tias MODBUS RTU qhev BUS tsis qhib);
• Network: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw hloov pauv thiab tswj tus IP chaw nyob, Netmask thiab view MAC Chaw Nyob;
• Nkag mus Chaw: ntawm nplooj ntawv no nws tuaj yeem teeb tsa cov chaw rau kev hloov kho thiab tswj tus LOGIN USER thiab PASSWORD;
• sACN: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw rau kev qhib lossis kaw qhov kev cai;
• Telnet: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw rau kev qhib lossis kaw cov txheej txheem thiab xa sijhawm;
• ARTNet: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw rau kev qhib lossis kaw qhov kev cai;
• MODBUS TCP qhev: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw rau kev qhib lossis kaw cov txheej txheem;
• Firmware Hloov tshiab: ntawm nplooj ntawv no nws tuaj yeem teeb tsa li cas lub cuab yeej Firmware hloov kho;
• Log: cov khoom cav tau khaws cia rau ntawm nplooj ntawv no;
• Log Configuration: ntawm nplooj ntawv no koj tuaj yeem teeb tsa cov chaw rau kev tswj cov LOGs.

SIAB: CHANNEL 

DGM02 muaj ib WebApp rau kev saib xyuas thiab kev tswj hwm ntawm txhua txoj kev muaj nyob hauv ntau yam DALI, DMX, MODBUS raws tu qauv, uas tuaj yeem siv los ntawm txhua lub cuab yeej nruab nrog lub browser sib xws.
Los ntawm lub neej ntawd, lub qhov rais rau kev tswj hwm 16 channel tau tshwm sim. Siv cov "NUMBER OF SLIDERS" icon koj tuaj yeem xaiv pes tsawg txoj kev pom hauv ib qho screen (tsis ntau tshaj 200) thiab, ua tsaug rau "DISPLAY MODE" icon, npaj cov slides ntawm cov channel.
horizontally los yog vertically.
Nws kuj tseem tuaj yeem txav mus los ntawm txhua 512 cov channel uas muaj los ntawm nyem rau ntawm "GO TO FIRST", "GO TO LAST" khawm lossis los ntawm kev nce qib ib lossis yim txoj hauv ib lub sijhawm los ntawm nias rau ntawm "+1" lossis "+8" icons. Ib yam yog qhov tseeb yog tias koj xav rov qab mus rau ib lossis yim txoj hauv ib lub sijhawm los ntawm txhaj rau lub cim "-1" lossis "-8"
Ua tsaug rau "MASTER" swb nws tuaj yeem teeb tsa tag nrho cov channel rau tib tus nqi dimming.
Daim duab no tso cai rau koj mus view nyob rau hauv txhua lub slider seb nws puas yog los ntawm ib qho ntawm peb lub tsheb npav muaj nrog cov txheeb ze offset thiab teeb tsa ntau yam (yog xav paub ntxiv saib "BUS CONFIGURATION").
CEEB TOOM: Txhawm rau siv cov kev pabcuam muaj thiab cov ntawv thov kom raug, nws yuav tsum siv lub browser sib xws nrog cov thev naus laus zis: CSS-3, JS, XHR, CORS, JSON, ArrayBuffer.
Tau tshaj browsers yog: Microsoft Edge v. 16, Google Chrome v. 66, Mozilla Firefox v. 57, Safari v. 12.1, Opera v. 53 lossis siab dua.

 

QHOV CHAW: TSHUAJ TIV THAIV

BUS 1

BUS 1 muaj feem xyuam rau thawj qhov chaw nres nkoj RS485.

Koj tuaj yeem teeb tsa qhov chaw nres nkoj no hauv cov kev teeb tsa hauv qab no:

• Tsis Teeb
• RS485 MODBUS RTU tswv
• RS485 MODBUS RTU qhev
• DMX512 tswv
• DMX512 qhev

Hauv cov ntawv qhia zaub mov no nws muaj peev xwm muab "OFFSET" thiab "CHANNELS RANGE" rau BUS 1 raws.
OFFSET tso cai rau koj los muab tus lej ntawm qhov pib swb mus rau thawj channel ntawm BUS 1.
CHANGE RANGE tso cai rau koj los teeb tsa tus naj npawb ntawm cov channel uas koj xav siv hauv BUS 1.
Lub tsheb npav tuaj yeem raug kaw los ntawm kev siv tus chij "MUTE" lossis los ntawm kev teeb tsa lub tsheb npav hauv "TSIS SET".

BUS 2

BUS 2 muaj feem xyuam rau qhov chaw nres nkoj RS485 thib ob.

Koj tuaj yeem teeb tsa qhov chaw nres nkoj no hauv cov kev teeb tsa hauv qab no:

•  Tsis Teeb
•  RS485 MODBUS RTU tswv
•  RS485 MODBUS RTU qhev
•  DMX512 tswv
•  DMX512 qhev

Hauv cov ntawv qhia zaub mov no nws muaj peev xwm muab "OFFSET" thiab "CHANNELS RANGE" rau BUS 2 raws.
OFFSET tso cai rau koj los muab tus lej ntawm qhov pib swb mus rau thawj channel ntawm BUS 2.
CHANGE RANGE tso cai rau koj los teeb tsa tus naj npawb ntawm cov channel uas koj xav siv hauv BUS 2.
Lub tsheb npav tuaj yeem raug kaw los ntawm kev siv tus chij "MUTE" lossis los ntawm kev teeb tsa lub tsheb npav hauv "TSIS SET".

BUS 3

Bus 3 muaj feem xyuam rau qhov chaw nres nkoj BUS thib peb ntawm cov khoom. DALI raws tu qauv.

Koj tuaj yeem teeb tsa qhov chaw nres nkoj no hauv cov kev teeb tsa hauv qab no:

•  Tsis Teeb
• DALI tswj
•  DALI config

Hauv cov ntawv qhia zaub mov no nws muaj peev xwm muab "OFFSET" thiab "CHANNELS RANGE" ntawm 64 DALI nodes rau BUS 3 raws.
Qhov "DALI channels offset" tso cai rau koj los muab tus lej ntawm qhov pib swb rau thawj qhov chaw nyob DALI.
Qhov "DALI channels ntau" tso cai rau koj los teeb tsa tus lej ntawm cov channel uas koj xav siv hauv BUS 3.
Lub tsheb npav tuaj yeem raug kaw los ntawm txoj kev "MUTE" chij lossis los ntawm kev teeb tsa lub tsheb npav hauv
“Tsis SET”. Nrog rau cov haujlwm no koj lov tes taw lub npav thiab tua lub hwj chim ntawm lub npav DALI.
CEEB TOOM: thaum hais txog DALI cov khoom siv hauv DALI config hom, nws raug nquahu kom teeb tsa ntau yam rau 64, tus nqi siab tshaj plaws thiab tsuas yog tom qab rov qab mus rau DALI Controller teeb tsa thiab hais txog cov cuab yeej hloov pauv mus rau qhov xav tau.
Tom qab hloov kho cov chaw, nyem rau ntawm "THOV" khawm nyob rau sab xis saum toj, txwv tsis pub cov kev hloov pauv yuav ploj. Ntawm qhov tod tes, nrog rau "CLEAR" khawm cov kev hloov pauv raug muab tso tseg.

QHOV CHAW: DALI GLOBAL SETTINGS – BUS 3

Tsuas yog hauv Dali config hom nws tuaj yeem xa thiab hloov kho cov lus txib ntawm DALI ntiaj teb teeb tsa pop-up zaub mov uas yog:

• "TSIS TXAUS SIAB":
  o “Address”: xa cov lus txib
  o "Group": xa pab pawg lus txib
  o "Tshaj Tawm": xa cov lus txib tshaj tawm
• "Xa cov lus txib OFF hloov DAPC0": xa cov lus txib DALI OFF es tsis txhob DAPC hais kom ua 0;
• "SYSTEM FAILURE LEVEL": xa qhov System Failure Level hais kom ua hauv kev tshaj tawm;
•  "POWER ON LEVEL": xa cov lus txib Power On Level hauv kev tshaj tawm;
•  "FADE TIME": xa cov lus txib Fade Time hauv kev tshaj tawm;
•  "DT8 MANAGEMENT": ua rau kev tswj hwm ntawm DT8s;
•  "SYSTEM FAILURE COLOR": xa qhov System Failure Color commands rau RGBW Cheebtsam;
• "POWER ON COLOR": xa lub zog rau xim hais kom ua rau RGBW cov khoom;

CEEB TOOM:
Tsuas yog nias "THOV" yog cov lus txib DALI xa.
Txhawm rau qhib qhov kev teeb tsa ntawm lwm lub tsheb npav, muab lub npav DALI hauv DALI Controller hom.

SETTINGS: DALI CONFIG – BUS 3 

CEEB TOOM: ua ntej pib nrog qhov chaw nyob thiab teeb tsa ntawm DALI cov khoom siv, nws yog qhov yuav tsum tau teeb tsa BUS 3 inDALI Config hom.
TXOJ CAI
Los ntawm txhaj rau "DALI config" los ntawm cov ntawv qhia zaub mov pop-up, peb nkag mus rau DALI ntaus ntawv chaw nyob interface.

Nyob rau sab xis saum toj yog cov lus txib hauv qab no:

•  "SCAN": ua qhov kev tau txais ntawm DALI nodes twb hais lawm;
•  "TXHAIS TAG NRHO": ua qhov chaw nyob ntawm tag nrho cov DALI nodes, cov chaw nyob cov cuab yeej yuav raug tso tawm hauv ib daim ntawv teev npe;
•  "REMOVE ALL": tshem tawm qhov chaw nyob rau tag nrho DALI nodes.

CEEB TOOM: ua ntej ua tiav qhov chaw nyob ntawm lub kaw lus nws yog ib qho tsim nyog yuav tsum xa "REMOVE ALL" hais kom ua.
Kev txheeb xyuas cov khoom siv nyob hauv
Tom qab hais lus, nws muaj peev xwm nyem qhov node tsuas yog hais, kom nws tuaj yeem pom pom.

CHAW UA HAUJ LWM hloov ntawm cov khoom siv twb tau nyob
Txhawm rau hloov qhov chaw nyob ntawm ib leeg DALI node, yav dhau los hais, nws yog ib qho tsim nyog yuav tsum nkag mus rau tus nqi tshiab ntawm node (piv txwv li los ntawm 0 txog 63) mus rau sab xis ntawm lub flashing khawm ntawm lub node nws tus kheej thiab nias lub pob "APPLY" uas yuav tshwm sim. tam sim ntawd ntawm sab xis.

ASSOCIATING A pab pawg nrog DALI chaw nyob
Los ntawm txhaj rau ib qho ntawm 16 lub thawv uas qhia txog cov pab pawg muaj (piv txwv li los ntawm 0 txog 15) nws tuaj yeem koom nrog qhov chaw nyob xav tau rau DALI Pawg. Tom qab ntawd, los ntawm nias lub pob "THOV" uas tshwm rau saum toj, cov lus txib raug xa mus rau DALI BUS.

Raws li kev pom zoo ntawm qhov chaw nyob rau pawg, lub thawv hloov ntawm liab mus rau xiav

THOV IB QHOV TWG
Los ntawm txhaj rau ib qho ntawm 16 lub thawv uas qhia txog cov pab pawg muaj (piv txwv li los ntawm 0 txog 15) nws muaj peev xwm tshem tawm qhov chaw nyob xav tau los ntawm DALI Pawg. Tom qab ntawd, los ntawm nias lub pob "THOV" uas tshwm nyob rau saum toj, cov lus txib raug xa mus rau DALI BUS.

STATE NTAWM DALI NODE
Cov xwm txheej ntawm DALI node tau tshwm sim nyob rau hauv cov qauv ntawm lub pob uas piav txog tus lej chaw nyob, thiab yog raws li hauv qab no:

•  Dub: ntawm node tam sim no thiab tawm
• Yellow: node tam sim no thiab hloov rau
•  Liab: node tam sim no tab sis tsis teb kom raug (LAMP TSIS TAU)

DALI CONTROLER – IB 3

Hauv DALI Controller hom lub cuab yeej xa cov DALI raws raws li cov txheej txheem uas hloov kho tsuas yog cov nodes uas hloov tus nqi siv.
Nyob rau hauv txoj kev no, tsuas yog qhov kev siv zog hloov cov lus txib raug xa mus rau qhov cuam tshuam DALI node.
Los ntawm kev xaiv cov khoom NODES, nws tuaj yeem pom cov nodes nyob;

Hloov chaw los ntawm kev xaiv GROUPS yam khoom, nws tuaj yeem pom cov pab pawg uas cov nodes koom nrog.

DMX512 GLOBAL SETTINGS & RS485 - DMX MASTER (BUS 1 & BUS 2) 

Teem caij BUS 1 (los yog BUS 2) raws li DMX512 Master nyob rau hauv cov ntawv qhia pop-up qhib lub DMX512 GLOBAL SETTINGS thiab RS485 seem.
Cov teb uas pom nyob rau hauv RS485 seem rau Bus 1 (los yog Bus 2) yog:

• "Baud tus nqi": tsuas yog 250000;
•  "Nres me ntsis" 2 ntsis;
•  "Parity" tsis muaj;

Lub ntug ntawm 512 raws tuaj yeem tau txais ntawm ob lub tsheb npav BUS1 thiab BUS2.

Cov teb uas pom nyob rau hauv DMX512 GLOBAL SETTINGS seem rau Bus 1 (los yog Bus 2) yog:

• "Lub Sijhawm Scan Tsawg";
•  "Lub Sijhawm Scan ntau tshaj";
•  "Qhov tsawg kawg nkaus RX Break Pulse Duration [peb]"
•  "Qhov siab tshaj plaws RX Break Pulse Duration [peb]";

DMX512 GLOBAL SETTINGS & RS485 - DMX qhev (BUS 1 & BUS 2) 

Teem caij BUS 1 (los yog BUS 2) raws li DMX512 qhev nyob rau hauv cov ntawv qhia pop-up qhib lub DMX512 GLOBAL SETTINGS thiab RS485 seem.
Cov teb uas pom nyob rau hauv RS485 seem rau Bus 1 (los yog Bus 2) yog:

•  "Baud tus nqi", tsuas yog 250000;
•  "Stop me ntsis" 2 ntsis;
•  "Parity" tsis muaj leej twg.

Lub ntug ntawm 512 raws tuaj yeem tau txais ntawm ob lub tsheb npav BUS1 thiab BUS2.

Cov teb uas pom nyob rau hauv DMX512 GLOBAL SETTINGS seem rau Bus 1 (los yog Bus 2) yog:

• "Lub Sijhawm Scan Tsawg";
• "Lub Sijhawm Scan ntau tshaj";
• "Qhov tsawg kawg nkaus RX Break Pulse Duration [peb]"
• "Qhov siab tshaj plaws RX Break Pulse Duration [peb]";

MODBUS MASTER & RS485 - MODBUS RTU MASTER (BUS 1 & BUS 2)
Teem caij BUS 1 (los yog BUS 2) raws li MODBUS RTU Master nyob rau hauv cov ntawv qhia pop-up qhib cov ntu RS485 thiab MODBUS RTU Master.
Cov teb uas pom nyob rau hauv RS485 seem rau Bus 1 (los yog Bus 2) yog:

• "Baud nqi";
• "Nres me ntsis";
• "Parity".
  

Cov teb uas pom nyob rau hauv MODBUS RTU Master seem rau Bus 1 (los yog Bus 2) yog:

• "Lub Sijhawm Scan Tsawg";
• "Lub Sijhawm Scan ntau tshaj";
• "RX timeout";
• “TxAs80idOf6”.

Cov ntaub ntawv raug xa mus rau 80 tus qhev (ID 1…80).
Ib pawg ntawm 6 channel raug xa mus rau txhua tus qhev:

• ID1: raws 1 txog 6 raug xa mus rau hauv cov npe 0 txog 5
• ID2: raws 7 txog 12 raug xa mus rau hauv cov npe 0 txog 5
• …
• ID80: raws 475 txog 480 raug xa mus rau hauv cov npe 0 txog 5

MODBUS SLAVE & RS458 - MODBUS RTU SLAVE (BUS 1 & BUS 2)
Teem caij BUS 1 (los yog BUS 2) raws li MODBUS RTU qhev nyob rau hauv cov ntawv qhia pop-up qhib RS485 ntu thiab MODBUS RTU qhev.
Cov teb uas pom nyob rau hauv RS485 seem rau Bus 1 (los yog Bus 2) yog:

• "Baud nqi";
• "Nres me ntsis";
• "Parity".
  

Cov teb uas pom nyob rau hauv MODBUS RTU Slave section rau Bus 1 (los yog Bus 2) yog:

• "Ib tug qhev";

Tus ID yog xaiv tau los ntawm lub web server interface.
Cov ntaub ntawv tau txais ntawm Modbus RTU Slave nplooj ntawv.
Nws muaj peev xwm nyeem thiab sau 512 sau npe nrog tus nqi ntawm 0 txog 255.

QHIA: DIAGNOSTIC – LOG

Hauv seem LOG nws muaj peev xwm ua tiav kev kuaj mob ntawm cov khoom.

QHIA: DIAGNOSTIC – LOG CONFIGURATION

Nyob rau hauv cov ntaub ntawv ntawm kev pab cuam tej thaj chaw deb, nws muaj peev xwm mus xyuas qhov yuam kev uas yuav raug kaw nyob rau hauv lub "LOG" seem.
Nyob rau hauv cov ntaub ntawv no nws yog ib qho tseem ceeb rau configure hom kev kuaj mob los ntawm kev nkag mus rau lub "Log Configuration" seem, nplooj ntawv hauv qab no yuav tshwm sim:

Qhov "SECURITY LEVEL" teeb tsa hom ntaub ntawv koj xav tau view ntawm lub log:

•  "Info" cov ntaub ntawv hais txog qhov system uas tsis qhia txog yam teeb meem;
•  "Kev ceeb toom" cov ntaub ntawv uas qhia txog kev ua haujlwm raug ntawm lub cev tab sis uas yuav cuam tshuam rau nws txoj haujlwm;
•  "Fault" uas ua rau muaj kev cuam tshuam tiag tiag ntawm qhov system.

"VERBOSITY LEVEL" qhia txog qib ntawm cov ntaub ntawv uas peb muaj saum toj no thiab yog: "Low" qis, "Medium" nruab nrab theem thiab "High" theem siab.

NETWORK

DGM02 ntaus ntawv siv qhov chaw nres nkoj ethernet siv IPv4 raws tu qauv.
Lub neej ntawd IP chaw nyob yog: 192.168.1.4.
Hauv seem "Network", koj tuaj yeem hloov qhov chaw nyob IP, Netmask.
MAC Chaw Nyob yog qhov tshwj xeeb rau cov khoom thiab tsis tuaj yeem hloov pauv.
Tom qab hloov kho cov chaw, nyem rau ntawm "THOV" khawm nyob rau sab xis saum toj, txwv tsis pub cov kev hloov pauv yuav ploj. Nrog rau "CLEAR" khawm cov kev hloov pauv raug muab tso tseg.
CEEB TOOM: xyuam xim rau qhov tseeb tias "subnet" yuav tsum coincide rau tag nrho cov khoom siv uas yuav tsum tau sib txuas lus, piv txwv liample nrog "net-mask" 255.255.255.0 tag nrho cov khoom siv yuav tsum muaj qhov chaw nyob 192.168.1.xxx Kom pom.

LOGIN INFO

Kho kom raug daim ntawv pov thawj, txheej txheem:

•  Tom qab qhib qhov browser (peb pom zoo kom siv Google Chrome), nkag mus rau qhov chaw nyob hauv Gateway.
•  Sau tus neeg siv lub npe thiab tus password rau hauv cov teb sib xws.
  Muaj ob hom kev nkag: ADMIN thiab USER.
•  Hauv ADMIN hom, koj muaj kev nkag mus rau tag nrho cov kev teeb tsa thiab cov ntaub ntawv pov thawj yog:
  Username = admin
  Password = admin
•  Hauv USER hom nws tuaj yeem ua tau view tsuas yog tshooj Channels thiab cov ntawv pov thawj default yog:
  Tus neeg siv = username
  Password = user
•  Thaum kawg, nias tus yuam sij LOGIN kom nkag mus.
•  Hauv ADMIN hom nws muaj peev xwm hloov tau tus neeg siv lub npe thiab tus password ntawm ob tus neeg siv los ntawm txhaj rau Nkag Nkag Chaw hauv cov ntawv qhia zaub mov thiab nkag mus rau cov ntawv pov thawj xav tau.

HNUB QUB KAJ NTUG TSHAJ

Ntawm nplooj ntawv no koj tuaj yeem hloov kho lub firmware rau qhov tseeb version muaj.
FIRMWARE UPLOAD, txheej txheem:

1. Los ntawm web nplooj ntawv qhia zaub mov, nkag mus rau ntu "Firmware Update";
2.  Nyem rau "Xaiv File”thiab xaiv cov version ntawm FW kom thauj khoom;
   Cov file yuav tsum uploaded muaj ib hom ntawv .upf;
3. Thaum xaiv, nyem rau ntawm "Hloov Kho Tam Sim No" thiab tos rau qhov file yuav tsum tau loaded kom raug nyob rau hauv lub DGM02;
4. Thaum lub upload tiav, nyem rau ntawm "Reboot" khawm;
5. Tom qab nias lub pob "Reboot", DGM02 yuav rov pib dua.
6. Nyob rau tom ntej no switching rau, 2 sab laug tshaj LEDs yuav flash ib txhij kom qhia tau hais tias lub Reboot tau nqa tawm kom raug;
7. Lub sijhawm no, DGM02 yuav hloov kho rau FW version tshiab. Qhov kev nce qib ntawm kev hloov tshiab tuaj yeem pom tau tias LEDs yuav teeb raws li ntawm sab xis mus rau sab laug.
8.  Thaum qhov hloov tshiab tau ua tiav, DGM02 yuav rov qab mus rau nplooj ntawv home;
9. Yog hais tias, ntawm qhov tod tes, tom qab taw tes 6, cov LEDs rov qab mus rau flash hauv hom qauv, nws txhais tau hais tias qhov hloov tshiab firmware tsis tau ua;

CEEB TOOM: TSIS TXAUS SIAB RAU HAUV DGM02 TAM SIM NO kom txog thaum hloov kho tiav.

SACN (ETHERNET)

DGM02 siv sACN raws tu qauv thiab siv tau raws li sACN → DMX thiab sACN → DALI rooj vag los ntawm lub ntsiab software thiab teeb pom kev zoo tswj systems.
Qhov chaw nres nkoj siv yog UDP 5568.

Tom qab hloov kho cov chaw, nyem rau ntawm "THOV" khawm nyob rau sab xis saum toj, txwv tsis pub cov kev hloov pauv yuav ploj. Nrog rau "CLEAR" khawm cov kev hloov pauv raug muab tso tseg.

TCP TELNET (ETHERNET)

Lub DGM02 muaj Telnet neeg rau zaub mov muaj peev xwm tau txais thiab / lossis xa tawm DMX512A / DALI / MODBUS RTU ntug los ntawm / mus rau lwm yam khoom siv ntawm TCP raws tu qauv. Kev sib txuas lus tshwm sim los ntawm kev tsim kev sib txuas ntawm TCP chaw nres nkoj 23 (Telnet).
Qhov tsawg kawg settable ncua sij hawm rau xa cov lus teb cov hlua yog txhais raws li "min scan time".
Nyob rau hauv qhov kev tshwm sim uas tsis muaj kev hloov pauv, lub ncua sij hawm uas cov hlua raug xa mus ib ntus yog txhais nrog tus nqi teem rau "max scan time". Tus nqi xoom cuam tshuam kev sib kis ntawm lub sijhawm.

Tom qab hloov kho cov chaw, nyem rau ntawm "THOV" khawm nyob rau sab xis saum toj, txwv tsis pub cov kev hloov pauv yuav ploj. Nrog rau "CLEAR" khawm cov kev hloov pauv raug muab tso tseg.
Cov xwm txheej ntawm 512 lub teeb siv ntau ntau lossis tsawg dua tuaj yeem xa mus rau hauv ib txoj hlua ASCII.
DATA LEVEL
Qhov kev thov yog kaw los ntawm thiab tags:
....
- Lub addr teb qhia, nyob rau hauv hexadecimal cim, thawj qhov yuav kis tau tus mob.
- Qhov loj me qhia, nyob rau hauv hexadecimal cim, tus lej qhov yuav kis tau.
Sab hauv tags, cov slots yuav kis tau nrog ib tug ntau ntawm 00 mus rau FF yuav tsum tau muab tso rau hauv hexadecimal cim.
Tus naj npawb ntawm cov cim khub ntawm tus thiab tags yuav tsum sib npaug ntawm cov slots uas yuav kis tau

Chaw example:	Xa:
thawj lamp ntawm qhov siab tshaj plaws thiab tus so tawm	FF0000…0200
ob lamp ntawm qhov siab tshaj plaws thiab tus so tawm	<data addr=’0000′ size=’0200′>00FF0000…00</data>
ob lamp ntawm 50% brightness thiab tus so tawm	0000…0200
thawj lamp feem ntau yam tsis hloov lwm tus	FF
ob lamp feem ntau yam tsis hloov lwm tus	FF
qhov thib ob thiab thib peb ntawm 50% yam tsis hloov lwm tus	0001 0002
Txhawm rau thov cov xwm txheej yam tsis hloov qhov muaj nuj nqis

POWER-ON: DEFAULT Levels
Nrog txoj hlua delimited los ntawm thiab tags nws muaj peev xwm txuag tau nyob rau hauv volatile nco lub neej ntawd qhov tseem ceeb yuav kis tau mus rau lub hwj chim-up.

Cia cov nqi tam sim no raws li Power-On qhov tseem ceeb:

QUERY DALI Device HOM
Cov lus txib no tso cai rau koj paub cov node hom tam sim no nyob rau hauv 512 muaj nyob.
Cov lus txib xa yuav tsum tau muab kaw rau hauv cov no tags: thiab .

Thov xa
Risposta da DGM Ntaus hom (ti): 00: hom node tsis tau txhais 0x01: DALI node, tsuas brightness theem 0x04: DALI node hom DT4 0x06: DALI node hom DT6 0x08: DALI node hom DT8 0x80: DMX configured as master 0x81: DMX configured as qhev 0x90: MODBUS configured as master 0x91: MODBUS configured as qhev 0xBF Ntau lub npav txhais: 0xFF: DALI node, tsis txhais	010800 ib t1|t2|t3|

SET RGBWAF DALI DT8 xim qib
Cov lus txib no yog siv los teeb tsa cov xim. Yog tias cov khoom siv nyob hauv yog hom DT8, DGM yuav teeb tsa cov xim kom raug, raws li tus nqi tshiab, txwv tsis pub cov lus txib yuav tsis muaj txiaj ntsig. Cov lus txib yog enclosed los ntawm tags: thiab .
Qhov loj tshaj plaws yog tsau ntawm 64.
MASK tus nqi 0xFF yog siv los tawm cov xim tam sim no tsis hloov.
Chaw Nyob: Qhov chaw nyob yog hais txog txoj haujlwm tam sim no ntawm cov ntaub ntawv sab hauv, qhov twg Dali node nyob.
Loj: siab tshaj qhov loj = 64.

Teem xim qib (DT8 li xwb)

0000 R|G|B|W|A|F|R|G|B|W|A|F|

R = liab G = ntsuab B = xiav W = dawb A = amber F = dawb xim
CEEB TOOM: Thaum txhua qib xim raug teem rau 0, DALI ballast mus rau hauv "OFF state".
Qhov no txhais tau hais tias txhawm rau teeb tsa xim tshiab nws yog qhov tsim nyog yuav tsum xub xa qhov ci ntsa iab siab tshaj xoom mus rau ntawm qhov thiaj li yuav rov qab "ON xeev".
QUERY RGBWAF DALI DT8 xim qib
Cov lus txib no yog siv los nug cov xim xim.
Yog hais tias qhov chaw nyob ntaus ntawv yog hom DT8, DGM teb nrog cov xim tam sim no / 6 bytes ib lub cuab yeej), txwv tsis pub nws rov qab tag nrho cov ntaub ntawv ntawm 00. Qhov kev thov raug kaw los ntawm cov tags: thiab .
Qhov loj tshaj plaws yog tsau ntawm 64.
Yog hais tias ib lub node tsis yog hom DT8, cov xim codes tag nrho yog teem rau xoom (6 zaug 0x00).

Thov qib xim
Teb los ntawm DGM	808010000000FE0080000000 R|G|B|W|A|F|R|G|B|W|A|F|

R = liab G = ntsuab B = xiav W = dawb A = amber F = dawb xim
SET COLOR TC LEVEL
Cov lus txib no yog siv los teeb tsa qhov sib txheeb xim kub (Tc). Yog tias qhov chaw nyob yog TW (Tunable White) hom DT8, DGM yuav teeb tsa qhov tseeb Tc, raws li tus nqi tshiab, txwv tsis pub cov lus txib yuav tsis cuam tshuam. Cov lus txib yog enclosed los ntawm tags:
thiab .
Qhov loj tshaj plaws yog tsau ntawm 64.
MASK tus nqi 0xFF yog siv los tawm cov xim tam sim no tsis hloov.
Chaw nyob: qhov chaw nyob yog hais txog txoj haujlwm tam sim no ntawm DB, qhov twg Dali node nyob.
Loj: siab tshaj qhov loj = 64

Teem xim qib (DT8 TW li xwb)

FD0000

Txhawm rau xam tus nqi hais kom siv raws li tus nqi CCT hauv Kelvin, koj yuav tsum siv cov txheej txheem hauv qab no: Hloov tus nqi Kelvin CCT rau Mirek:

Tus nqi Mirek yuav tsum tau hloov mus rau hexadecimal: rau exampib, 333 -> 014D
Qhov thib peb thiab plaub tus lej ntawm tus nqi tau los ua thawj thiab thib ob tus lej ntawm cov lus txib
Thawj thiab tus lej thib ob ntawm tus nqi tau dhau los ua tus lej thib peb thiab plaub ntawm cov lus txib

Txhawm rau teeb tsa CCT rau 3000K ntawm qhov chaw nyob A0 koj yuav tsum siv cov lus txib hauv qab no:
0000d0001 ua
Saib cov lus hauv qab no rau kev siv:

CCT (K)	txib	CCT (K)	txib	CCT (K)	txib	CCT (K)	txib	CCT (K)	txib
2200	C701	3000	4d01 ib	3900	0001	4800	D000	5700	TIAB SA 00
2300	B301	3100	4301	4000	TIAB SA 00	4900	CC 00	5800	SIB 00
2400	A101	3200	3901	4100	F400	5000	C800	5900	A900
2500	9001	3300	2f01 ua	4200	EE00	5100	C400	6000	A700
2600	8101	3400	2601	4300	E900	5200	C000	6100	A400
2700	7201	3500	1e01 ua	4400	E300	5300	PAB 00	6200	A100
2800	6501	3600	1601	4500	TIAB SA 00	5400	B900	6300	9f00 ua
2900	5901	3700	0e01 ua	4600	D900	5500	B600	6400	9c 00
2950	5301	3800	0701	4700	D500	5600	B300	6500	9 00aXNUMX

QUERY COLOR TC Qib
Cov lus txib no yog siv los xa cov lus nug rau Tc qib. Yog hais tias qhov chaw nyob ntaus ntawv yog hom DT8 TW, DGM teb nrog cov xim tam sim no (2 bytes ib lub cuab yeej), txwv tsis pub nws rov qab tag nrho cov ntaub ntawv rau 00. Qhov kev thov raug kaw los ntawm lub tags: thiab .
Qhov loj tshaj plaws yog tsau ntawm 64.
Yog tias ib lub node tsis yog hom DT8, Tc cov lej raug teeb tsa rau xoom (2 zaug 0x00).

Nug tc xim theem
DGM teb	FD01

FADE ENGINE
Ib lossis ntau qhov fadings tuaj yeem pib ntawm 512 qhov ci ntsa iab (fades). Qhov kev thov no yog ua nrog ib txoj hlua khi los ntawm lub thiab tags:
....

• Lub sij hawm teb qhia, nyob rau hauv hexadecimal cim, lub sij hawm ploj nyob rau hauv 0.1s units, nrog ib tug ncua sij hawm ntawm 0.1 mus rau 3600 vib nas this
  (1 teev).
  Qhov nqes tsawg kawg yog 25.5 vib nas this ib kauj ruam; Qhov no txhais tau hais tias qhov siab tshaj plaws ploj mus ntawm 0 mus rau 1 qib (los yog los ntawm 35 txog 34 rau example) yog 25.5s, mus ntawm 0 mus rau 2 qib yog 51s. Txoj kab nqes yog txwv sab hauv. Tus nqi "0000" qhia tias yuav tsum tsis txhob fading ntawm tus nqi tiag tiag.
• Lub addr teb qhia, nyob rau hauv hexadecimal cim, thawj qhov yuav kis tau tus mob.
• Qhov luaj li cas ntawm daim teb qhia, nyob rau hauv hexadecimal cim, tus naj npawb ntawm cov slots yuav kis tau.

Cov slots yuav kis tau yuav tsum tau muab tso rau hauv lub tags, nyob rau hauv qhov ntau ntawm 00 rau FF hauv hexadecimal sau.
Tus nqi teev rau "XX" qhia tias qhov ploj mus tsis ua tiav rau cov channel sib xws.
Qhov siab tshaj plaws ntawm 64 qhov tseem ceeb (xws li cov channel) tuaj yeem xa tuaj rau hauv ib pob ntawv, yog li tsawg kawg 8 pob ntawv yuav tsum raug xa mus pib qhov ploj ntawm tag nrho 512 raws.

Rau exampli, set:	Xa:
thawj lamp ntawm qib siab tshaj plaws thiab qhov thib peb tawm, nrog 5 vib nas this ntawm ploj mus	TXF 0032

Thaum cov pob ntawv tau txais los ntawm Ethernet lossis chaw tsheb npav thiab nrog kev tswj kom ploj mus, txhua zaus ib txoj hlua tau txais ib txoj hlua raug xa mus raws li cov lus teb nrog lub sijhawm tsawg kawg nkaus (lub sijhawm scan tsawg kawg nkaus):
010203040506070809 ...
Tshaj tawm cov xwm txheej ntawm tag nrho 512 lub teeb siv theem. Yog tias tsis muaj kev hloov pauv, txoj hlua tseem raug xa nrog lub sijhawm teeb tsa (lub sijhawm scan siab tshaj plaws) yog tias ntau dua xoom.
CEEB TOOM: Qhov sib nrug thiab kev txiav txim ntawm cov teb yuav tsum nruj me ntsis ua raws li. Cov hlua kis tau tus mob yuav tsum raug xa mus nruj me ntsis hauv ib pob TCP; Cov kab lus teb raug xa mus rau hauv ib pob ntawv TC

ART-NET 4 (ETHERNET) 

DGM02 ua raws li Art-Net 4 raws tu qauv thiab siv tau raws li Art-Net → DMX thiab Art-Net → DALI rooj vag los ntawm lub ntsiab software thiab teeb pom kev zoo tswj systems. Qhov chaw nres nkoj siv yog UDP 6454.

TXOJ CAI PACKET 

OpCode	Nco tseg
ArtDmx	Sub-Net thiab Universe raug xa mus rau DGM ntug
ArtPoll

Tom qab hloov kho cov chaw, nyem rau ntawm "THOV" khawm nyob rau sab xis saum toj, txwv tsis pub cov kev hloov pauv yuav ploj. Nrog rau "CLEAR" khawm cov kev hloov pauv raug tso tseg.
MODBUS TCP (ETHERNET)
Lub DGM02 muaj MODBUS TCP / IP neeg rau zaub mov muaj peev xwm tau txais thiab / lossis xa lub ntiaj teb DMX512A mus rau ib lossis ntau dua Modbus li ntawm Ethernet network. 512 cov ntawv sau npe muaj, nrog Modbus chaw nyob ntawm 0 txog 511 thiab tus nqi ntawm 0 txog 255.
Qhov chaw nres nkoj siv yog TCP 502, tus qhev ID tsis suav nrog.
Tom qab hloov kho cov chaw, nyem rau ntawm "THOV" khawm nyob rau sab xis saum toj, txwv tsis pub cov kev hloov pauv yuav ploj. Nrog rau "CLEAR" khawm cov kev hloov pauv raug tso tseg.
TXOJ CAI PACKET

Function Code	Lub Npe Ua Haujlwm
03	Nyeem Holding register
06	Sau npe ib leeg
16	Sau npe ntau

DALCNET Srl
36077 Altavilla Vicentina (VI) – Ltalis
Ntawm Lago di Garda, 22
Xov tooj. +39 0444 1836680
www.dalcnet.com - yog info@dalcnet.com
Hloov kho 20/03/2023

Cov ntaub ntawv / Cov ntaub ntawv

DALC NET DGM02 Server Gateway [ua pdf] Tus neeg siv phau ntawv DGM02 Server Gateway, DGM02, Server Gateway, Rooj vag

Cov ntaub ntawv

• Cov neeg siv phau ntawv