ColoRAdo SIJ HAWM SYSTEMS Wireless Handheld Segment Timer Controller Tus Neeg Siv Qhia

Cov ntsiab lus zais

1 ColorRado SIJ HAWM SYSTEMS Wireless Handheld Segment Timer Controller

2 Product Description

3 Pib nrawm

4 Ntawv qhia zaub mov

5 Lub Sijhawm Caij Nyoog

6 Teeb liab poob teeb meem

7 Cov ntaub ntawv / Cov ntaub ntawv

7.1 Cov ntaub ntawv

8 Related Posts

ColorRado SIJ HAWM SYSTEMS Wireless Handheld Segment Timer Controller

Product Description

Segment Timer Handheld Controller tuaj yeem tswj Colorado Lub Sijhawm Systems ntau yam kev ua si nawv uas muaj plaub tus lej sijhawm.

4-tus lej slim pace moos qhia cov feeb thiab vib nas this ntawm tus rep (01: 12 hauv examples show).
6 tus lej slim pace moos, lawj moos thiab portable scoreboards qhia cov feeb thiab vib nas this ntawm tus rep nrog rau tus lej rep (2 hauv examples show).

Lub sijhawm ncua sij hawm tuaj yeem raug programmed los tswj txog li 10 programmable teev txog li 50 Reps.
Chav tsev khiav ntawm 2 AA roj teeb; CTS pom zoo cov roj teeb rov qab. Lub neej cia siab rau ob lub roj teeb yog 8 teev.

Pib nrawm

Hwj chim On thiab Off
Tig lub maub los los ntawm nias thiab tuav lub "-" yuam sij. Chav tsev yuav qhia lub logo CTS thiab tom qab ntawd tso saib Rep screen.

Tig lub maub los los ntawm kev nkag mus rau cov ntawv qhia zaub mov thiab xaiv Off.
Navigation, Arrow Keys thiab Enter Key
Txhawm rau nkag mus rau ntawm qhov screen siv tus xub yuam sij thiab tus yuam sij Enter
nyob rau hauv nruab nrab ntawm cov xub tuav.

Ntawv qhia zaub mov

Nyob rau sab saum toj ntawm qhov screen yog lo lus "MENU". Koj tuaj yeem tso saib cov ntawv qhia zaub mov los ntawm kev siv cov pob xub los qhia cov lus MENU (yog tias nws tseem tsis tau taw qhia) thiab tom qab ntawd nias tus yuam sij nkag.
Nco tseg: Koj tsis tuaj yeem nkag mus rau qhov screen zaub mov thaum lub moos ua haujlwm. Nres lub moos nrog tus yuam sij liab yog tias koj xav nkag mus rau hauv cov ntawv qhia zaub mov.
Cov ntawv qhia zaub mov tseem ceeb muaj peb yam khoom sib txawv. Siv cov xub xub los qhia txog qhov nyiam ua haujlwm thiab nias tus yuam sij nkag rau hauv nruab nrab.

Sijhawm Hnub : Qhov kev ua haujlwm no tso cai rau koj teev lub sijhawm ntawm hnub ntawm lub sijhawm tswj hwm. Thaum lub moos pace yog nyob rau thaum nws cov maub los raug kaw, lub moos pace yuav pom lub sijhawm ntawm hnub. Txhawm rau teeb tsa, tsuas yog ua kom pom qhov ua haujlwm no nrog cov xub tuav. Tom ntej no, siv tus xub tuav los ua kom pom tseeb
Hom - Nias nkag alternates ntawm 12-teev hom thiab 24-teev hom.
Sijhawm - Txhawm rau hloov lub sijhawm ntawm hnub, siv tus xub yuam sij los qhia lub sijhawm thiab siv cov yuam sij "+" thiab "-" kho cov teev lossis feeb.
QUB / CANCEL - Qhia qhov "SET" thiab nias Nkag mus yuav txuag tej kev hloov. Highlight Exit nyob rau sab saum toj ntawm lub vijtsam thiab nias nkag mus rov qab mus rau Rep screen. Highlighting "CANCEL" thiab nias Nkag mus yuav xa rov qab koj mus rau cov ntawv qhia zaub mov tseem ceeb thaum tsis quav ntsej txog kev hloov pauv ntawm Lub Sijhawm Hnub.
Kev sib txuas - Txoj haujlwm no coj koj mus rau lub vijtsam sub-screen uas koj tuaj yeem hloov kho cov kev sib txuas wireless. Tus tswj tuav tuav yuav tsum phim lub channel, PAN ID, thiab module ntawm lub moos pace nws tswj, raws li tso tawm ntawm lub moos pace ntawm lub hwj chim. Lub moos nrawm yuav kuaj cov ntu LED, thiab tom qab ntawd mus rau lub voj voog ntawm Channel (qhia nrog "C"), PAN (qhia nrog "P") thiab Module Chaw Nyob (qhia nrog "A").
Yog tias tsim nyog los hloov cov kev teeb tsa no, siv cov yuam sij xub kom highlight qhov xav tau parameter thiab ces nias Nkag mus scroll los ntawm cov kev xaiv sib txawv. Koj tuaj yeem teeb tsa cov khoom hauv qab no los ntawm qhov tseem ceeb ntawm cov khoom nrog cov xub xub thiab hloov cov txiaj ntsig nrog tus yuam sij nkag:

PAN ID: Los ntawm 0 txog 15
Channel: Los ntawm 0 txog 11
Module: Los ntawm 1 txog 6

CEEB TOOM: Yog tias tus tswj tuav tuav tau teeb tsa rau qhov chaw sib txawv dua li lub moos nrawm, lub rooj tsavxwm yuav tsis tau txais cov ntaub ntawv.

RSSI - Nkag mus rau Kev Sib Txuas sub-screen yuav qhib rau RSSI feature. Thaum On, "tau txais lub teeb liab lub zog" yog tshwm sim nyob rau hauv lub scoreboard. Tus lej yuav nyob nruab nrab ntawm 24 thiab 64 hexadecimal, yog li koj tuaj yeem pom ob tus lej thiab cov ntawv A txog F. Tus lej qis dua, lub teeb liab muaj zog dua. Yog tias tsis muaj tus lej txheeb xyuas cov channel thiab PAN ntawm ob qho tib si WHC thiab cov khoom tau txais. Yog tias tus naj npawb siab yog xa mus rau Kev Kho Teeb Meem Tsis Muaj Teeb Meem ntawm nplooj 7 .
T-Level - Qhia qhov version ntawm xov tooj cua nruab rau hauv lub cev
Version - Qhia cov firmware version
Program hom - muab lub cuab yeej tso rau hauv hom rau wirelessly hloov kho lub firmware (Siv tsuas yog yog qhia los ntawm CTS tus kws tshaj lij.)
Txhawm rau rov qab mus rau Rep screen, siv tus yuam sij xub kom taw qhia "EXIT" nyob rau sab saum toj ntawm lub vijtsam thiab tom qab ntawd nias Enter .
Tawm - Siv cov xub tuav txhawm rau txhawm rau "MENU" thiab tom qab ntawd taw qhia "OFF" thiab tom qab ntawd nias Enter

Lub Sijhawm Caij Nyoog

Cov ntu timer tso cai rau koj los tsim txog li kaum teev ntawm ib txog tsib caug Reps.

Programming lub teeb thiab reps
(Txog 10 programmable teev thiab 50 programmable Reps)

Siv tus xub xiav txoj cai thiab nce xub yuam sij txhawm rau taug qab lub vijtsam thiab qhia lo lus "SET" thiab siv Enter yuam kom xaiv "SET" zaub mov.
Thaum nyob hauv SET ntawv qhia zaub mov:
- Siv cov yuam sij xiav xiav mus navigate ntawm ib thiab kaum teev.
- Txhawm rau luam tawm thiab muab tso rau ib qho kev xaiv, siv Start toggle ntawm daim ntawv / muab tshuaj txhuam ua haujlwm. Txhawm rau tshem tawm cov txheej txheem xaiv, siv Nres los xaiv Clear, thiab tom qab ntawd Pib xaiv Clear. Siv Ncua tseg kom deselect ib txheej
- Siv cov Nkag mus tus yuam sij xaiv ib lub teeb thiab tso saib Rep screen rau cov teeb ntawd.
Hauv Rep screen siv tus yuam sij ob npaug mus scroll nce ib nplooj ntawv thiab tus yuam sij ob down xub scroll down ib nplooj ntawv.

Siv cov yuam sij xiav nce toj mus rau qhov xaiv Rep screen thiab Enter los xaiv tus Rep los kho
Siv xiav sab xis laug xub yuam sij xaiv lub sijhawm Rep qeb. Siv cov "+" thiab "-" yuam sij kom increment/decrement lub sij hawm xaiv..
- Sij hawm tuaj yeem teem caij los ntawm 0-99
- Cov feeb tuaj yeem teem caij los ntawm 0-59
- Seconds tuaj yeem teem caij los ntawm 0-59

Txhua Tus Neeg Sawv Cev tuaj yeem raug teeb tsa los suav sau lossis suav sau los ntawm kev siv cov yuam sij "-" lossis "+". thaum xaiv cov suav / suav nqis toggle cim
Beep tuaj yeem tsim los ntawm 0-9 vib nas this los ntawm kev xaiv tus lej beep thiab siv tus yuam sij "-" lossis "+" .

Txav mus rau Rep nce lossis nqis hauv qhov kev txiav txim los ntawm qhov tseem ceeb ntawm tus neeg sawv cev thiab siv tus yuam sij "-" thiab "+" .
Xaiv tus Rep tom ntej los ntawm kev siv tus xub yuam sij .
Khiav lub teeb
1. Siv tus xub yuam sij xaiv thawj Rep nyob rau hauv lub teeb.
2. Xaiv Pib khiav lub teeb.
3. Xaiv Nres kom nres lub teeb.
4. Xaiv Pib dua rov pib dua Rep.

Teeb liab poob teeb meem

FCC Daim Ntawv Pom Zoo:
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev khiav hauj lwm yog ua raws li ob qho xwm txheej hauv qab no: (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.

Muaj: FCC ID Peb-XBEEPRO lossis MCQ-XBEE3, 2.4GHz transmitter
Muaj: Model xBeePRO Xov tooj cua, IC: 4214-XBEEPRO los yog xBee3 Xov tooj cua, IC: 1846A-XBEE3