CISCO CGR 2010 Txuas Daim phiaj Ethernet Hloov Module Interface Card
Khoom Tshajview
Tshooj lus no piav qhia txog Cisco Connected Grid Ethernet Hloov Module Interface Card, tom qab ntawd hu ua qhov hloov pauv. Cov kev hloov pauv tau siv ua ke nrog Cisco 2010 Connected Grid Router (CGR 2010) muaj cov khoom siv hluav taws xob sib txuas sib txuas kom muaj kev ntseeg siab thiab ruaj ntseg ob txoj kev sib txuas lus rau substation automation.
Nco tseg
Cisco CGR 2010 router yuav tsum tau khiav Cisco IOS Release 15.1(4)M lossis siab dua los khiav qhov hloov pauv.
Hloov cov qauv
Table 1-1 Txuas Grid Ethernet Hloov Module Interface Card Qauv
| Hom | Kev piav qhia |
| GRWIC-D-ES-6S (SFP fiber ntau qauv) | 4 100 Mb/s SFP (me me-factor pluggable) module slots, 1 Gigabit Ethernet (GE) dual-purpose chaw nres nkoj (1 10/100/1000BASE-T chaw nres nkoj thiab 1 100/1000 Mb/s SFP module qhov), 1 100/1000 SFP qhov M. |
| GRWIC-D-ES-2S-8PC
(Cov qauv tooj liab) |
8 10/100BASE-T ports, 1 GE dual-purpose chaw nres nkoj
(1 10/100/1000BASE-T chaw nres nkoj thiab 1 100/1000 Mb/s SFP module qhov), 1 100/1000 Mb/s SFP module qhov.
|
| Nco tseg Thawj plaub qhov chaw nres nkoj 10/100BASE-T (FE0/1, FE0/2, FE0/3, FE0/4) yog PoE +1 chaw nres nkoj. |
- PoE + = Fais fab dhau Ethernet ntxiv (muab txog li 30 W ib qhov chaw nres nkoj).
Chaw nres nkoj
- Chaw nres nkoj, nplooj 1-2
- Port Labeling, nplooj 1-3
- 10/100BASE-T Ports, nplooj 1-4
- PoE thiab PoE+ Ports, nplooj 1-4
- 10/100 Mb/s SFP Module Slots, nplooj 1-5
- 100/1000 Mb/s SFP Module Slots, nplooj 1-5
- Dual-Purpose Gigabit Ethernet Ports, nplooj 1-5
- Txhawb SFPs, nplooj 1-6
Chaw nres nkoj chaw
Daim duab 1-1 GRWIC-D-ES-6S (SFP Fiber Model)
| 1 | 10/100 Mb/s SFP modules |
| 2 | Dual-purpose chaw nres nkoj |
| 3 | 100/1000 Mb/s SFP module qhov |
Daim duab 1-2 GRWIC-D-ES-2S-8PC (Copper Model)
| 1 | 10/100BASET-T chaw nres nkoj |
| 2 | Dual-purpose chaw nres nkoj |
| 3 | 100/1000 Mb/s SFP Chaw nres nkoj |
Chaw nres nkoj Labeling
Qhov chaw nres nkoj daim ntawv lo rau cov hloov modules tau piav qhia hauv Table 1-2 thiab Table 1-3.
Table 1-2 GRWIC-D-ES-6S Chaw nres nkoj Labeling
| Chaw nres nkoj | Daim ntawv lo |
| 4 10/100 Mb/s SFP modules | FE0/1, FE0/2, FE0/3, FE0/4 |
| Dual-purpose chaw nres nkoj (10/100/1000BASE-T chaw nres nkoj thiab 100/1000 Mb/s SFP module qhov) | ZPO 0/1 |
| 100/1000 Mb/s SFP module qhov | ZPO 0/2 |
Table 1-3 GRWIC-D-ES-2S-8PC Chaw nres nkoj Labeling
| Chaw nres nkoj | Kev piav qhia |
| 8 10/100BASE-T chaw nres nkoj | FE0/1, FE0/2, FE0/3, FE0/4, FE0/5, FE0/6, FE0/7, FE0/8 |
| Dual-purpose chaw nres nkoj (10/100/1000BASE-T chaw nres nkoj thiab 100/1000 Mb/s SFP module qhov) | ZPO 0/1 |
| 100/1000 Mb/s SFP module qhov | ZPO 0/2 |
10/100BASE-T Ports
Koj tuaj yeem teeb tsa 10/100BASE-T cov chaw nres nkoj ntawm qhov hloov mus ua haujlwm hauv ib nrab duplex, puv duplex, lossis 10 lossis 100 Mb / s. Koj tuaj yeem teeb tsa cov chaw nres nkoj kom ceev thiab duplex pib-kev sib tham. Qhov kev teeb tsa ua ntej yog pib sib tham.
Thaum teem rau nws pib-kev sib tham, qhov hloov pauv txiav txim siab qhov ceev thiab duplex chaw ntawm lub cuab yeej txuas, thiab tshaj tawm nws tus kheej lub peev xwm. Yog tias cov cuab yeej txuas nrog kuj txhawb kev sib tham pib, qhov hloov pauv sib tham txog qhov kev sib txuas zoo tshaj plaws (cov kab ceev tshaj plaws uas ob qho tib si txhawb nqa thiab kev sib kis puv-duplex yog tias cov cuab yeej txuas txuas txhawb nws), thiab teeb tsa nws tus kheej raws li. Nyob rau hauv txhua rooj plaub, cov cuab yeej txuas yuav tsum nyob hauv 328 ko taw (100 meters). 10/100BASE-T cov chaw nres nkoj siv RJ-45 txuas nrog Ethernet pinouts. Qhov siab tshaj plaws cable ntev yog 328 ko taw (100 meters). 100BASE-TX kev tsheb yuav tsum tau Qeb 5, Qeb 5e, lossis Qeb 6 unshielded twisted khub (UTP) cable. 10BASE-T tsheb tuaj yeem siv Qeb 3 lossis Qeb 4 UTP cable.
Nco tseg
Ntawm GRWIC-D-ES-2S-8PC hloov module, thawj plaub 10/100 Fast Ethernet ports (FE0/1, FE0/2, FE0/3, FE0/4) yog PoE + ports.
PoE thiab PoE + Ports
Thawj plaub 10/100 Fast Ethernet ports (FE0/1, FE0/2, FE0/3, FE0/4) ntawm GRWIC-D-ES-2S-8PC hloov module yog PoE + ports.
Ceeb toom
Voltages uas nthuav tawm qhov kev puas tsuaj tshwm sim tuaj yeem tshwm sim ntawm Lub Hwj Chim dhau Ethernet (PoE) circuits yog tias kev sib txuas yog tsim los siv cov hlau tsis muaj hluav taws xob, cov neeg siv hluav taws xob, lossis cov khoom siv hluav taws xob. Tsis txhob siv cov kev sib txuas lus zoo li no, tshwj tsis yog cov khoom siv hlau raug nyob hauv qhov chaw txwv tsis pub nkag mus thiab cov neeg siv thiab cov neeg tau txais kev tso cai nyob rau hauv qhov chaw txwv tsis pub nkag tau paub txog kev phom sij. Ib qho kev txwv tsis pub nkag mus tau tsuas yog los ntawm kev siv lub cuab yeej tshwj xeeb, xauv thiab qhov tseem ceeb lossis lwm yam kev ruaj ntseg. lus 1072
Cov PoE + cov chaw nres nkoj muab:
- Kev them nyiaj yug rau IEEE 802.3af-raws li cov khoom siv hluav taws xob (txog 15.4 W PoE ib qhov chaw nres nkoj) thiab kev txhawb nqa rau IEEE 802.3at-raws li cov khoom siv hluav taws xob (txog 30 W PoE + ib qhov chaw nres nkoj).
- Kev them nyiaj yug rau prestandard Cisco powered li.
- Configurable txhawb rau Cisco ntse hwj chim tswj, suav nrog:
- txhawb zog sib tham
- fais fab kev tshwj tseg
- per-port zog tub ceev xwm
Ntawm GRWIC-D-ES-2S-8PC qauv (Copper qauv), thawj plaub qhov chaw nres nkoj 10/100BASE-T (FE0/1, FE0/2, FE0/3, FE0/4) yog PoE + chaw nres nkoj. Qhov siab tshaj plaws ntawm ob lub PoE + chaw nres nkoj lossis plaub qhov chaw nres nkoj PoE tuaj yeem txhawb nqa ib zaug.
Yog xav paub txog kev teeb tsa thiab saib xyuas PoE / PoE + cov chaw nres nkoj, saib "Interface Configuration" tshooj ntawm Cisco Connected Grid Ethernet Hloov Module Interface Card Software Configuration Guide ntawm Cisco.com.
Yog xav paub ntaub ntawv hais txog kev sib txuas ntawm cov chaw nres nkoj thiab cov chaw nres nkoj tshwj xeeb, saib "Kev Sib Txuas Cov Cuab Yeej rau Hloov Hloov" ntu ntawm nplooj 4-4 thiab "Cable thiab Connectors" cov ntawv ntxiv.
Nco tseg
Cov zis ntawm PoE + Circuit Court tau raug soj ntsuam raws li Limited Power Source (LPS) rau IEC 60950-1.
10/100 Mb/s SFP Module Slots
IEEE 802.3u 100 Mb/s SFP module slots muab tag nrho-duplex 100 Mb/s kev sib txuas ntawm ntau hom (MM) fiber ntau cables lossis ib hom (SM) fiber ntau cables. Cov chaw nres nkoj no siv SFP fiber ntau-optic transceiver module uas lees txais ob lub LC txuas. Txheeb xyuas SFP cov lus qhia tshwj xeeb rau hom kab thiab qhov ntev.
100/1000 Mb/s SFP Module Slots
IEEE 802.3u 1000 Mb/s SFP module slots muab tag nrho-duplex 100 lossis 1000 Mb/s kev sib txuas ntawm ntau hom (MM) fiber ntau cables lossis ib hom (SM) fiber ntau cables. Cov chaw nres nkoj no siv SFP fiber ntau-optic transceiver module uas lees txais ob lub LC txuas. Txheeb xyuas SFP cov lus qhia tshwj xeeb rau hom kab thiab qhov ntev.
Dual-Purpose Gigabit Ethernet Ports
Koj tuaj yeem teeb tsa ob lub hom phiaj chaw nres nkoj ntawm qhov hloov pauv li 10/100/1000 Ethernet ports lossis raws li SFP module ports. Koj tuaj yeem teeb tsa 10/100/1000 Ethernet ports rau autonegotiate, lossis koj tuaj yeem teeb tsa lawv li 10, 100, lossis 1000 Mb / s Ethernet ports.
Los ntawm lub neej ntawd, qhov hloov pauv xaiv qhov nruab nrab rau txhua qhov chaw nres nkoj ob lub hom phiaj (10/100/1000BASE-T lossis SFP). Thaum qhov txuas tau tiav ntawm ib hom xov xwm, qhov hloov pauv yuav cuam tshuam rau lwm hom xov xwm kom txog thaum qhov txuas txuas mus. Yog tias cov kev sib txuas tau ua haujlwm ntawm ob qho kev tshaj tawm, SFP module chaw nres nkoj muaj qhov tseem ceeb, tab sis koj tuaj yeem siv cov xov xwm-hom interface teeb tsa cov lus txib kom manually xaiv qhov chaw nres nkoj raws li RJ-45 chaw nres nkoj lossis SFP chaw nres nkoj.
Koj tuaj yeem teeb tsa qhov ceev thiab duplex chaw raws li hom xov xwm xaiv. Yog xav paub txog kev teeb tsa kev sib txuas, saib "Interface Configuration" tshooj ntawm Cisco Connected Grid Ethernet Hloov Module Interface Card Software Configuration Guide ntawm Cisco.com.
Yog xav paub ntxiv ntawm SFP cov chaw nres nkoj modules saib "Supported SFPs" seem ntawm nplooj 1-6 thiab cov ntaub ntawv ntawm SFP modules connectors thiab cables nyob rau hauv "Cable and Connectors" appendix.
Txhawb SFPs
Table 1-4 piav qhia txog kev txhawb nqa SFP modules.
Nco tseg
Cov nram qab no SFP module slot cov ntsiab lus yuav tsum tau sau tseg:
- Plaub 100 Mb / s FE SFP module slots ntawm Fiber qauv tsuas tuaj yeem txhawb nqa 100FX kev sib txuas.
- 100/1000 Mb/s SFP modules txhawb ob qho tib si 100FX thiab 1000Base-X kev sib txuas.
Table 1-4 Txhawb SFP Cov Qauv
| Hom ntawm SFP Module | Qauv |
| Rugged thiab Industrial SFPs
-40 txog 140 ° F (-40 txog 60 ° C) |
|
| Kev lag luam SFPs
32 txog 113 ° F (0 txog 45 ° C) |
|
| Ntxiv qhov kub thiab txias SFPs 23 txog 140 ° F (-5 txog 60 ° C) |
|
Nco tseg
SFP module GLC-FE-100FX-RGD xav tau Version 2 los ua haujlwm kom raug hauv qhov hloov pauv. Tom qab txhim kho SFP no, koj tuaj yeem tau txais cov lus hauv qab no:
PLATFORM-4-SFP_REVISION_WARNING: Interface muaj ib qho SFP module uas tsis pom zoo rau cov khoom no.
Qhov no yog ib qho software ceeb toom uas tshwm sim thaum kuaj pom ib tug laus version ntawm SFP module GLC-FE-100FX-RGD, uas tau raug hloov nrog ib tug tshiab version (Rev. 2).
Qhov kev pom zoo yog los hloov qhov SFP module nrog qhov tseeb Cisco certified version ntawm no SFP. Qhov hloov pauv yuav tsum tau Rev. 2 lossis siab dua ntawm SFP no rau kev ua haujlwm zoo tshaj plaws ntawm tag nrho cov kev khiav hauj lwm kub. Txhawm rau txheeb xyuas VID rau tus lej hloov kho, siv cov lus qhia cov khoom muag.
LEDs
Tshooj lus no piav qhia qhov chaw thiab kev ua haujlwm ntawm LEDs ntawm qhov hloov module.
Daim duab 1-3 GRWIC-D-ES-6S Hloov Module (SFP Fiber Model) LEDs
Table 1-5 GRWIC-D-ES-6S Hloov Module (SFP Fiber Model) LED lus piav qhia
| LED | Kev piav qhia |
| ZPO 0/1 | Qhia txog lub xeev ntawm Gigabit Ethernet dual lub hom phiaj chaw nres nkoj:
|
| ZPO 0/2 | Qhia txog lub xeev ntawm 1000 Mb/s SFP module qhov:
|
Daim duab 1-4 GRWIC-D-ES-2S-8PC Hloov Module (Copper Model) LEDs
Table 1-6 GRWIC-D-ES-2S-8PC Hloov Module (Copper Model) LED lus piav qhia
| LED | Kev piav qhia |
| POE | Qhia yog tias PoE/PoE + ua haujlwm tau.Cov plaub PoE-muaj peev xwm ports yog FE0/1, FE0/2, FE0/3, thiab FE0/4. |
| SYS | Qhia qhov xwm txheej ntawm qhov hloov module. Yog tias LED yog daj, xyuas Syslog rau cov teeb meem. |
| LED | Kev piav qhia |
| FE0/1 to FE 0/8 | Qhia txog lub xeev ntawm Fast Ethernet ports:
|
| ZPO 0/1 | Qhia txog lub xeev ntawm Gigabit Ethernet dual lub hom phiaj chaw nres nkoj:
|
| ZPO 0/2 | Qhia txog lub xeev ntawm 1000 Mb/s SFP module qhov:
|
Router Compact Flash Memory Cards
Compact flash cards tuaj yeem pab koj teeb tsa tshiab lossis hloov routers, thiab rov qab kho cov teeb tsa ntawm lub router ua tsis tiav. Rau exampYog li, yog tias Kev Sib Txuas Sib Txuas Sib Txuas Tsav Tsav feature tau qhib, koj tuaj yeem hloov cov ntaub ntawv kev teeb tsa tib yam ntawm ib lub router mus rau lwm qhov los ntawm kev siv daim npav flash nco (lossis daim npav compact flash) thaum lub routers ua haujlwm. Qhov no yog ua los ntawm kev ntxig ib qho kev xaiv compact flash card hauv qhov CF1 thiab luam tag nrho cov ntsiab lus ntawm CF0. Tom qab ua tiav daim ntawv theej ua tiav, koj tuaj yeem tshem tawm thiab ntxig qhov compact flash card unit hauv qhov CF0 ntawm ib lub router tshiab lossis hloov router rau chav ua tsis tiav. Thaum tus tshiab los yog hloov router yog rebooted, nws siv lub configuration los ntawm lub compact flash card raws li kev khiav thiab startup configuration. Qhov kev ua haujlwm no tso cai rau koj los teeb tsa cov routers tshiab lossis hloov pauv sai nrog tus qauv teeb tsa nrog me me lossis tsis muaj phau ntawv teeb tsa yuav tsum tau ua.
Yog xav paub ntxiv txog Swap Drive feature, saib:
http://www.cisco.com/en/US/docs/routers/connectedgrid/cgr2010/software/15_2_2_t/cgr2010_15_2_2_t_swcg.html#wp2039791
Lub router txhawb nqa qhov siab tshaj plaws ntawm ob daim npav flash nco. Lub router xa nrog ib daim npav compact flash ntsia hauv Slot CF0 thiab txhawb nqa ib qho thib ob, xaiv daim npav flash uas koj tuaj yeem xaj nrog lub router lossis muab cais.
Daim duab 5 qhia txog qhov chaw ntawm lub compact flash card slots ntawm lub router.
Daim duab 5 Cisco Connected Grid 2010 Router—Compact Flash Memory Card Slots
|
Yam khoom |
Sau npe rau ntawm Router |
Kev piav qhia |
Cisco IOS Interface Name |
| 1 | CF 1 | Qhov no txhawb nqa ib qho kev xaiv compact flash card uas koj tuaj yeem xaj nrog lub router lossis muab cais. Lub Connected Grid Swap Drive feature tsis txaus siab rau ntawm qhov no. | flash1: |
| 2 | CF 0 | Qhov no yog qhov yuav tsum tau muaj rau siv nrog Connected Grid Swap Drive feature. Lub router los nrog daim npav compact flash twb tau teeb tsa hauv qhov no.
Lub Connected Grid Swap Drive feature tau txais kev txhawb nqa ntawm qhov CF no nkaus xwb. |
nyem or
flash 0: |
Yog xav paub ntxiv txog lub router compact flash nco kev them nyiaj yug, xa mus rau router hardware installation qhia ntawm:
http://www.cisco.com/en/US/products/ps10977/prod_installation_guides_list.html
Kev teeb tsa
Tshooj lus no piav qhia txog yuav ua li cas rau nruab qhov hloov pauv hauv Cisco CGR 2010 routers. Qhov hloov module nyob ob ntawm plaub qhov ntawm I / O sab ntawm lub router. Tshooj lus no suav nrog cov ntsiab lus hauv qab no:
- Kev teeb tsa ua ntej
- Kev teeb tsa
- Txuas rau Network
- Tshem tawm qhov Hloov Module
Kev teeb tsa ua ntej
Ua ntej txhim kho qhov hloov pauv, xyuas cov lus qhia no tau ua raws:
- Clearance rau I / O-sab view yog xws li cov LEDs tau yooj yim nyeem
- Cov kab hluav taws xob nyob deb ntawm qhov chaw ntawm lub suab nrov, xws li xov tooj cua, kab hluav taws xob, thiab cov teeb pom kev zoo fluorescent. Xyuas kom tseeb tias cov cabling nyob deb ntawm lwm yam khoom siv uas yuav ua rau cov cables puas.
- Airflow nyob ib ncig ntawm lub hloov module thiab los ntawm cov vents yog unrestricted
- Kub nyob ib ncig ntawm chav tsev tsis tshaj 140 ° F (60 ° C). Yog tias qhov hloov pauv tau nruab rau hauv lub kaw lus kaw lossis multirack sib dhos, qhov kub nyob ib puag ncig nws yuav siab dua li chav tsev kub.
- Tus txheeb ze humidity nyob ib ncig ntawm lub module hloov tsis pub tshaj 95 feem pua (noncondensing)
- Qhov siab ntawm qhov chaw teeb tsa tsis siab tshaj 10,000 ko taw
- Rau 10/100 thiab 10/100/1000 qhov chaw ruaj ruaj, cable ntev los ntawm qhov hloov pauv mus rau cov khoom siv txuas tsis ntev tshaj 328 ko taw (100 meters)
Installation Warning nqe lus
Tshooj lus no suav nrog cov lus ceeb toom kev teeb tsa yooj yim. Kev txhais lus ntawm cov lus ceeb toom no tshwm sim nyob rau hauv Cov Lus Qhia Txog Kev Ua Raws Cai thiab Kev Nyab Xeeb rau Cisco CGS 2520 Hloov thiab Cov Ntaub Ntawv Tswj Xyuas Kev Nyab Xeeb thiab Kev Nyab Xeeb rau Cisco Connected Grid Router 2000 Series Routers cov ntaub ntawv.
- Ceeb Toom Chav tsev no yog npaj rau kev teeb tsa hauv thaj chaw txwv tsis pub nkag. Ib qho kev txwv tsis pub nkag mus tau tsuas yog los ntawm kev siv lub cuab yeej tshwj xeeb, xauv thiab qhov tseem ceeb, lossis lwm yam kev ruaj ntseg. Nqe lus 1017
- Ceeb Toom Tsuas yog cov neeg ua haujlwm tau txais kev cob qhia thiab tsim nyog yuav tsum tau tso cai rau nruab, hloov, lossis muab cov khoom siv no. Nqe 1030
- Ceeb Toom Kom tiv thaiv kom tsis txhob muaj cua sov, tsis txhob ua haujlwm nyob rau hauv qhov chaw uas siab tshaj qhov siab tshaj plaws qhov kub thiab txias: 140 ° F (60 ° C) Nqe Lus Qhia 1047
- Ceeb Toom Cov cuab yeej no yog muab los ua "qhib hom" cov cuab yeej siv. Nws yuav tsum tau muab tso rau hauv ib lub thawv uas tsim nyog rau cov xwm txheej ib puag ncig tshwj xeeb uas yuav muaj thiab tsim nyog tsim los tiv thaiv tus kheej raug mob los ntawm kev nkag mus rau qhov chaw nyob. Sab hauv ntawm lub qhov rooj yuav tsum nkag tau tsuas yog los ntawm kev siv lub cuab yeej.
Lub kaw lus yuav tsum ua kom tau raws li IP 54 lossis NEMA hom 4 yam tsawg kawg nkaus ntawm cov ntawv pov thawj. lus 1063 - Kev Ceeb Toom Cov cuab yeej no yog tsim los ua raws li kev cai emission thiab tiv thaiv kab mob. Xyuas kom meej tias qhov hloov chaw ua haujlwm hauv av txuas nrog lub ntiaj teb hauv av thaum siv ib txwm. lus 1064
- Ceeb Toom Kom tiv thaiv kom tsis txhob muaj kev txwv huab cua, tso cai tshem tawm ib ncig ntawm qhov qhib qhov cua kom tsawg kawg nkaus: 1.75 in. (4.4 cm) Nqe lus 1076
Kev teeb tsa
Ua raws li cov kauj ruam no rau nruab qhov hloov module:
- Kauj Ruam 1 Ua ntej koj nruab (lossis tshem tawm) qhov hloov pauv ntawm tus tswv tsev CGR 2010 router, koj yuav tsum tso hluav taws xob rau lub router raws li tau piav qhia hauv ntu "Shutting Off Power" hauv Tshooj 3 ntawm Cisco Connected Grid Router 2010 Hardware Installation Guide.
- Kauj ruam 2 Taug qab I/O sab ntawm Cisco CGR 2010 router, siv tus lej no. 2 Phillips screwdriver kom tshem tawm qhov sib faib ntawm qhov chaw uas koj npaj siab yuav nruab qhov hloov pauv - ob qho tib si qhov 0 thiab 1 lossis qhov 2 thiab 3 (saib daim duab 2-1).
- Tshem tawm ob lub screws ntawm qhov sib faib.
- Tshem lub qhov sib faib thiab muab tso rau ib sab.
Daim duab 2-1 Tshem tawm qhov sib faib ntawm qhov CGR 2010 Router
Kauj ruam 3 Sawv ntsug qhov hloov pauv ntawm qhov kawg rau nruab rau hauv Cisco CGR 2010 router qhov (saib Daim duab 2-2).
Daim duab 2-2 Kev Tso Cai Hloov Module rau Nruab rau hauv Router
Kauj ruam 4 Muab cov tes tuav thiab ua tib zoo xaub lub module mus rau hauv daim ntawv qhia, tom qab ntawd thawb nrog ob txhais tes kom txog thaum lub module ntws tawm ntawm lub router chassis (saib daim duab 2-3).
Daim duab 2-3 Txhim kho qhov Hloov Module hauv CGR 2010 Router
Kauj Ruam 5 Tighten cov screws:
- Tighten lub taub hau flathead ntsia hlau rau hauv qab qhov nruab nrab qhov.
- Tighten tus thib ob panhead ntsia hlau mus rau sab saum toj qhov chaw.
Kauj ruam 6 Tighten peb captive screws nyob rau hauv pem hauv ntej ntawm lub hloov module:
- Tighten lub captive ntsia hlau nyob rau sab laug ntawm lub module.
- Tighten ib tug captive ntsia hlau nyob rau sab xis ntawm lub module.
- Thaum kawg, nruj nreem ntsia hlau rau sab laug ntawm lub module.
Tam sim no qhov hloov module tau ua tiav hauv lub router (saib daim duab 2-4).
Daim duab 2-4 Hloov Module Nruab hauv CGR 2010 Router
Txuas rau Network
- Txuas lub Copper Switch Module, nplooj 2-5
- Txuas lub Fiber Hloov Module, nplooj 2-6
Txuas lub Copper Hloov Module
Ua raws li cov kauj ruam no txhawm rau txuas qhov hloov pauv tus qauv tooj liab (GRWIC-D-ES-2S-8PC) mus rau lub network:
Kauj ruam 1 Txuas ib kawg ntawm lub cable mus rau ib qho ntawm Fast Ethernet ports ntawm qhov hloov module (saib daim duab 2-5).
Daim duab 2-5 Txuas tus qauv tooj liab rau lub Network
Kauj ruam 2 Txuas lwm kawg ntawm lub cable rau RJ-45 connector ntawm lub hom phiaj ntaus ntawv.
Txuas lub Fiber Hloov Module
Ua raws li cov kauj ruam no txhawm rau txuas qhov hloov pauv ntawm cov qauv fiber ntau (GRWIC-D-ES-6S) rau lub network:
Kauj ruam 1 Txuas ib kawg ntawm lub cable mus rau ib qho ntawm 6 qhov chaw nres nkoj ntawm fiber ntau Ethernet hloov module (saib daim duab 2-6).
Daim duab 2-6 Txuas SFP Fiber Model rau Network
Kauj ruam 2 Txuas lwm qhov kawg ntawm lub cable mus rau tus qauv LC-hom optical connector ntawm lub hom phiaj ntaus ntawv.
Tshem tawm qhov Hloov Module
Ceev faj Cisco CGR 2010 router tsis txhawb kev tshem tawm cov modules thaum lub chassis tau qhib.
Tshem tawm qhov hloov pauv thaum lub router ua haujlwm tuaj yeem ua rau tus cwj pwm tsis zoo, xws li rov pib dua lub router lossis kev puas tsuaj rau lub router.
Ua raws li cov kauj ruam no kom tshem tawm qhov hloov pauv ntawm tus tswv tsev router:
- Kauj Ruam 1 Fais fab rau CGR 2010 router raws li tau piav qhia hauv "Shutting Off Power" hauv Tshooj 3 ntawm Cisco Connected Grid Router 2010 Hardware Installation Guide.
- Kauj Ruam 2 Tshem tawm peb cov ntsia hlau ntsia hlau thiab ob lub ntsia hlau nyob rau sab saum toj thiab hauv qab nruab nrab ntawm lub module.
- Kauj Ruam 3 Muab cov tes tuav ruaj khov nrog ob txhais tes thiab ua tib zoo rub tawm cov hloov pauv.
- Kauj ruam 4 Fais fab lub router thaum npaj ua li ntawd.
Kev teeb tsa Express
Koj nkag mus rau qhov hloov pauv ntawm tus tswv tsev CGR 2010 router. Yog xav paub ntxiv, saib Accessing the Switch Module, nplooj 4-2.
Txhawm rau sib pauv thiab saib xyuas cov lus tswj hwm ntawm qhov hloov pauv thiab lub router, Router Blade Configuration Protocol (RBCP) pawg ua haujlwm ib txhij ntawm IOS ntu ntu uas khiav ntawm ob tus tswv tsev router thiab hloov module. Koj yuav tsum siv Express Setup kom nkag mus rau thawj cov ntaub ntawv IP. Tom qab ntawd koj tuaj yeem nkag mus rau qhov hloov pauv los ntawm qhov chaw nyob IP rau kev teeb tsa ntxiv.
Tshooj lus no muaj cov ncauj lus hauv qab no:
- Cov Kev Xav Tau
- Kev teeb tsa Express
- Troubleshooting Express Setup
- Rov pib dua qhov Hloov Module
Nco tseg
Txhawm rau siv CLI-raws li kev teeb tsa thawj zaug, saib Cov Ntawv Ntxiv A, "Tsim ib qho kev teeb tsa thawj zaug nrog CLI Teeb Kev Pabcuam," hauv Cisco Connected Grid Ethernet Hloov Module Interface Card Software Configuration Guide.
Cov Kev Xav Tau
Koj xav tau cov software hauv qab no thiab cables los khiav Express Setup:
- PC nrog Windows 2000, XP, Vista, Windows Server 2003, lossis Windows 7
- Web browser (Internet Explorer 6.0, 7.0, lossis Firefox 1.5, 2.0, lossis tom qab) nrog JavaScript enabled
- Ncaj-dhau los yog crossover Qeb 5 lossis Qeb 6 cable
Kev teeb tsa Express
Ua raws li cov kauj ruam no los pib Express Setup:
- Kauj ruam 1
Disable tej pop-up blockers los yog proxy chaw ntawm koj web browser, thiab txhua tus neeg siv wireless khiav hauv koj lub computer. - Kauj Ruam 2 Xyuas kom tseeb tias tsis muaj cov cuab yeej txuas nrog rau qhov hloov pauv.
- Kauj ruam 3 Kho koj lub computer ib ntus kom siv DHCP, yog tias nws muaj qhov chaw nyob IP zoo li qub. Hloov module ua raws li DHCP server.
Tswv yim Sau qhov chaw nyob IP zoo li qub, raws li koj xav tau qhov chaw nyob no hauv kauj ruam tom ntej.
- Kauj ruam 4 Fais fab ntawm CGR 2010 router. Thaum tus tswv tsev router yog powered, lub router cia li powers li tus qauv hloov.
Yog xav paub ntxiv, saib "Powering Up the Router" hauv Tshooj 4, "Configuring Router," nyob rau hauv lub
Cisco Connected Grid Routers 2010 Hardware Installation Guide.
Thaum lub zog hloov pauv rau lub zog, nws pib qhov Kev Ntsuas Tus Kheej (POST), uas tuaj yeem siv sijhawm li ob feeb.
- Thaum POST, System LED ntsais ntsuab thiab ces chaw nres nkoj LEDs tig ntsuab
- Thaum POST tiav, System LED tseem ntsuab thiab lwm yam LEDs tua
Nco ntsoov Yog hais tias qhov System LED blinks ntsuab, tsis tig ntsuab los yog lem amber, hloov module ua tsis tau tejyam POST. Hu rau koj tus neeg sawv cev Cisco lossis reseller.
- Kauj ruam 5 Nias lub recessed Express Setup khawm nrog ib tug yooj yim cuab tam, xws li ib daim ntawv clip. Tej zaum koj yuav tau nias lub pob rau 3 vib nas this. Thaum koj nias lub pob, qhov hloov module 10/100 Ethernet chaw nres nkoj LED blinks ntsuab.
Daim duab 3-1 Recessed Express Setup Button
Nco ntsoov Yog tias qhov hloov pauv qhov chaw nres nkoj LED tsis ntsais ntsuab, rov ua cov kauj ruam 1 txog 5. Koj tuaj yeem siv CLI teeb tsa kev pab cuam uas tau piav qhia hauv Daim Ntawv Ntxiv A, "Tsim ib qho Kev Teeb Meem Pib nrog CLI Kev Pabcuam," nyob rau hauv Cisco 2010 Connected Grid Ethernet Hloov Module Interface Card Software Configuration Guide.
- Kauj ruam 6 Xaiv ib qho ntawm cov hauv qab no:
- Rau tus qauv tooj liab (GRWIC-D-ES-2S-8PC), txuas Cat 5 lossis 6 cable rau lub ntsais muag 10/100BASE-T chaw nres nkoj, thiab lub ntsaws rau lwm qhov kawg rau Ethernet chaw nres nkoj ntawm koj lub computer.
- Rau SFP Fiber Model (GRWIC-D-ES-6S), txuas Qeb 5 lossis Qeb 6 cable mus rau 100/1000BASE-T chaw nres nkoj ntawm ob lub hom phiaj chaw nres nkoj (GE0/1), thiab tom qab ntawd ntsaws rau lwm qhov kawg rau qhov
- Ethernet ntsaws rau hauv koj lub computer
Tos kom txog thaum qhov chaw nres nkoj LEDs ntawm qhov hloov pauv thiab koj lub computer yog ntsuab lossis blinking ntsuab (xws li kev sib txuas ua tiav).
Tswv yim Yog tias qhov chaw nres nkoj LEDs tsis ntsuab tom qab 30 vib nas this, xyuas kom meej tias koj siv Cat 5 lossis 6 cable thiab tias lub cable tsis puas. Xyuas kom tseeb tias lwm yam khoom siv tau qhib. Koj tuaj yeem txheeb xyuas qhov kev sib txuas los ntawm pinging IP chaw nyob 169.250.0.1.
Ua raws li cov kauj ruam no los teeb tsa qhov hloov pauv module:
- Kauj ruam 1 Qhib a web browser thiab nkag mus rau qhov hloov module IP chaw nyob.
- Kauj ruam 2 Sau cisco ua lub neej ntawd username thiab password.
Daim duab 3-2 Express Setup Window
Tswv yim Yog tias koj tsis tuaj yeem nkag mus rau Express Setup, xyuas kom meej tias tag nrho cov pop-up blockers lossis cov chaw tso npe raug kaw, thiab txhua tus neeg siv wireless hauv koj lub khoos phis tawj raug kaw.
- Kauj ruam 3 Nkag mus rau Network Settings qhov tseem ceeb:
| Teb | Kev piav qhia |
| Management Interface (VLAN ID) | Siv lub default setting ntawm 1.
Nco tseg Nkag mus rau VLAN ID tshiab tsuas yog yog tias koj xav hloov pauv kev tswj hwm interface rau qhov hloov pauv. VLAN ID ntau yog 1 txog 1001. |
| IP Kev Ua Haujlwm Hom | Siv lub default setting ntawm Static, uas txhais tau hais tias qhov hloov module khaws tus IP chaw nyob.
Nco tseg Siv qhov chaw DHCP thaum koj xav kom hloov module kom tau txais tus IP chaw nyob los ntawm DHCP server. |
| IP Chaw Nyob | Sau tus IP chaw nyob ntawm qhov hloov module |
| SubnetMask | Xaiv ib lub npog ntsej muag subnet los ntawm qhov poob |
| Default Gateway | Nkag mus rau tus IP chaw nyob rau lub rooj vag qub (router) |
| Hloov Password | Sau koj tus password. Tus password tuaj yeem yog los ntawm 1 mus rau 25 tus lej cim, tuaj yeem pib nrog tus lej, yog cov ntaub ntawv nkag siab, tso cai rau qhov chaw kos, tab sis tsis tso cai rau qhov chaw thaum pib lossis xaus. |
| Confirm Hloov Password | Sau koj tus password dua
Nco tseg Koj yuav tsum hloov tus password los ntawm tus password qub cisco. |
- Kauj ruam 4 Nkag mus rau qhov chaw xaiv xaiv tam sim no, lossis nkag mus rau lawv tom qab siv tus Thawj Tswj Ntaus Ntaus interface.
Koj tuaj yeem nkag mus rau lwm qhov chaw tswj hwm hauv Express Setup window. Rau example, cov kev xaiv tswj chaw txheeb xyuas thiab synchronize tus hloov module rau kev txhim kho kev tswj. NTP synchronizes hloov module nrog lub moos network. Koj tseem tuaj yeem teeb tsa lub kaw lus moos teeb tsa manually. - Kauj ruam 5 Nyem Xa mus txuag koj cov kev hloov pauv.
Tam sim no tus hloov module tau teeb tsa thiab tawm ntawm Express Setup. Tus browser nthuav tawm cov lus ceeb toom thiab sim txuas nrog qhov hloov tshiab IP chaw nyob ua ntej. Feem ntau, kev sib txuas ntawm lub khoos phis tawj thiab qhov hloov pauv hloov pauv tau ploj vim tias qhov hloov pauv module IP chaw nyob yog nyob rau hauv ib qho sib txawv subnet rau lub computer IP chaw nyob. - Kauj Ruam 6 Tshem tawm qhov hloov pauv ntawm lub khoos phis tawj, thiab nruab qhov hloov pauv hauv koj lub network (saib Kev teeb tsa, nplooj 2-2).
- Kauj ruam 7 Yog tias koj tsis tau hloov koj tus IP chaw nyob, hla cov kauj ruam no.
Yog tias koj hloov koj tus IP chaw nyob hauv cov txheej txheem dhau los, hloov nws mus rau qhov chaw nyob IP yav dhau los (saib Kauj Ruam 3). - Kauj ruam 8 Tso saib Tus Thawj Tswj Ntaus Ntawv:
- Qhib a web browser thiab nkag mus rau qhov hloov module IP chaw nyob.
- Sau tus username thiab password thiab ces nias Enter.
Yog xav paub ntxiv txog kev teeb tsa thiab tswj qhov hloov pauv, saib Nkag mus rau Hloov Module, nplooj 4-2.
Nco tseg Yog tias Tus Thawj Tswj Ntaus Ntawv tsis tso tawm, kos cov hauv qab no:
- Paub meej tias LED rau qhov hloov module chaw nres nkoj txuas nrog koj lub network yog ntsuab
- Paub meej tias lub khoos phis tawj uas koj siv nkag mus rau qhov hloov pauv module muaj kev sib txuas hauv network los ntawm kev txuas mus rau a web server hauv koj lub network. Yog tias tsis muaj kev sib txuas hauv network, teeb meem kev teeb tsa network hauv koj lub computer.
- Xyuas kom tseeb tias qhov hloov module IP chaw nyob hauv qhov browser yog lawm. Yog tias qhov tseeb, qhov chaw nres nkoj LED yog ntsuab thiab lub computer muaj kev sib txuas hauv network. Txuas ntxiv kev daws teeb meem los ntawm kev txiav tawm thiab tom qab ntawd rov txuas qhov hloov pauv mus rau koj lub computer. Txhim kho qhov chaw nyob IP zoo li qub ntawm lub khoos phis tawj uas nyob hauv tib lub subnet raws li qhov hloov pauv IP chaw nyob.
Thaum lub LED ntawm qhov hloov module chaw nres nkoj uas txuas rau lub computer yog ntsuab, qhib a web browser thiab nkag mus rau qhov hloov pauv IP chaw nyob los tso saib Tus Thawj Tswj Ntaus Ntaus. Thaum Tus Thawj Tswj Ntaus Ntawv nthuav tawm, koj tuaj yeem txuas ntxiv nrog kev teeb tsa.
Troubleshooting Express Setup
Yog tias koj tseem muaj teeb meem khiav Express Setup, ua cov tshev hauv Table 3-1.
Table 3-1 Troubleshooting Express Setup
| Teeb meem | Kev daws teeb meem |
| POST tsis ua tiav ua ntej koj pib Express Setup | Xyuas kom tseeb tias tsuas yog qhov System thiab Chaw nres nkoj LEDs ntsuab ua ntej koj nias lub pob nthuav qhia.
Nco tseg POST yuam kev yog feem ntau tuag taus. Hu rau koj tus neeg sawv cev pabcuam kev pabcuam Cisco yog tias koj qhov hloov pauv tsis ua haujlwm POST. |
| Kev teeb tsa khawm tau nias ua ntej POST tiav | Tos kom txog thaum POST ua tiav, thiab tom qab ntawd rov pib qhov hloov pauv. Tos kom txog thaum POST ua tiav dua, thiab tom qab ntawd paub meej tias System thiab Chaw nres nkoj LEDs ntsuab. Nias lub Kev teeb tsa Express khawm. |
| Lub computer muaj qhov chaw nyob IP zoo li qub | Hloov cov chaw hauv koj lub computer kom siv DHCP ib ntus |
| Ethernet txuas nrog lub console chaw nres nkoj | Tshem tawm cov cable los ntawm Console chaw nres nkoj ntawm qhov hloov module. Txuas lub cable mus rau lub ntsais muag 10/100 Ethernet chaw nres nkoj ntawm qhov hloov pauv. Tos 30 vib nas this, ces qhib a web browser.
Nco tseg Qhov chaw nres nkoj Console tau piav qhia hauv xiav, thiab Ethernet cov chaw nres nkoj tau piav qhia hauv daj. |
| Qhib tsis tau a web browser pib Express Setup | Tos 30 vib nas this ua ntej qhib a web browser ntawm lub computer |
Rov pib dua qhov Hloov Module
Ceev faj
Resetting lub hloov module deletes lub configuration thiab restarts lub hloov module nrog default settings.
- Kauj Ruam 1 Nias thiab tuav lub pob nthuav qhia rau li 10 vib nas this. Hloov module reboots. Lub kaw lus LED hloov ntsuab tom qab qhov hloov pauv module ua tiav rebooting.
- Kauj ruam 2 Nias lub pob nthuav qhia dua rau peb vib nas this. Qhov hloov module 10/100 Ethernet chaw nres nkoj LED blinks ntsuab.
- Kauj Ruam 3 Ua raws li cov kauj ruam hauv Express Setup, nplooj 3-1.
Tswj lub Hloov Module
Tom qab ua tiav Express Setup thiab txhim kho qhov hloov pauv hauv koj lub network, koj tuaj yeem siv cov kev xaiv no rau kev teeb tsa ntxiv:
- Siv lub Device Manager
- Cisco Configuration Professional
- Lwm txoj kev tswj hwm
- Nkag mus rau Hloov Module, nplooj 4-2
- Txuas Devices mus rau Hloov Module, nplooj 4-4
Siv lub Device Manager
Txoj kev yooj yim tshaj plaws los tswj qhov hloov pauv yog nrog Tus Thawj Tswj Ntaus Ntaus hauv lub cim xeeb hloov pauv. Qhov no web interface muab ceev configuration. Koj tuaj yeem nkag mus rau tus thawj tswj ntaus ntawv los ntawm txhua qhov chaw hauv koj lub network los ntawm a web browser.
Ua raws li cov kauj ruam no los siv Tus Thawj Tswj Ntaus Ntaus:
- Kauj ruam 1 Qhib a web browser, nkag mus rau qhov hloov module IP chaw nyob, thiab nias Enter.
- Kauj Ruam 2 Siv Tus Thawj Tswj Ntaus Ntawv rau kev hloov pauv yooj yim module teeb tsa. Mus saib Device Manager online pab kom paub ntau ntxiv.
Cisco Configuration Professional
Cisco Configuration Professional (CCP) yog software program uas koj tuaj yeem rub tawm los ntawm Cisco.com thiab khiav ntawm koj lub PC. Nws muaj cov kev xaiv siab heev rau kev teeb tsa thiab saib xyuas ntau yam khoom siv, suav nrog kev hloov pauv module. Configuration Professional yog dawb - tsis muaj nqi rau rub tawm, nruab, lossis siv nws.
Ua raws li cov kauj ruam no los siv CCP:
- Kauj ruam 1 Mus rau qhov no URL: http://www.cisco.com/en/US/products/ps9422/index.html
Nco ntsoov Koj yuav tsum yog tus sau npe Cisco.com tus neeg siv, tab sis koj tsis xav tau lwm txoj cai nkag. - Kauj ruam 2 Nyem Download Software.
- Kauj ruam 3 Xaiv qhov tseeb tso tawm ntawm Configuration Professional installer, thiab nyem Download.
Nco ntsoov Cisco Configuration Professional 2.5 lossis tom qab tau txais kev txhawb nqa ntawm qhov hloov pauv. - Kauj ruam 4 Khiav lub Configuration Professional installer, thiab ua raws li cov lus qhia.
- Kauj ruam 5 Nyem Ua kom tiav kom tiav lub installation.
Saib Daim Ntawv Qhia Txog Kev Ua Haujlwm Pib Pib thiab Kev Pabcuam online kom paub ntau ntxiv.
Lwm txoj kev tswj hwm
Koj tuaj yeem siv SNMP kev tswj hwm daim ntawv thov xws li CiscoWorks LAN Management Solution (LMS) thiab Cisco netManager los teeb tsa thiab tswj qhov hloov pauv. Koj tseem tuaj yeem tswj hwm qhov hloov pauv los ntawm SNMP-compatible workstation uas tab tom khiav platforms xws li Cisco netManager lossis SunNet Manager.
Cisco Configuration Engine yog lub network tswj cov cuab yeej ua haujlwm nrog Cisco Networking Services (CNS) cov neeg sawv cev hauv kev hloov software. Koj tuaj yeem siv nws los ua kom cov kev teeb tsa thawj zaug thiab kev teeb tsa hloov tshiab ntawm qhov hloov.
Nkag mus rau Hloov Module
Nco tseg Cisco CGR 2010 router yuav tsum tau khiav Cisco IOS Release 15.1(4)M lossis siab dua los khiav qhov hloov pauv.
Tom qab lub Ethernet hloov module tau nruab rau ntawm lub router, koj pom Gigabit Ethernet tshiab interface 0/x/0 (qhov twg x yog tus lej qhov) lees paub los ntawm Cisco IOS. Cov zis tau qhia hauv Table 6 yog coj tom qab ob Ethernet hloov modules tau teeb tsa ntawm lub router:
Router1# qhia ip interface luv luv
Table 4-1 Tso zis rau Gigabit Ethernet Interface Pom tau ntawm Ethernet Hloov Module
| Interface | IP Chaw Nyob | OK? | Txoj kev | xwm txheej | raws tu qauv |
| GigabitEthernet0/0 | 60.60.60.1 | YOG | NVRAM | nqes | nqes |
| GigabitEthernet0/1 | 80.80.80.1 | YOG | phau ntawv | up | up |
| GigabitEthernet 0/0/0 | 100.0.0.1 | YOG | phau ntawv | up | up |
| GigabitEthernet 0/2/0 | 200.0.0.1 | YOG | NVRAM | up | up |
Cov kev pabcuam-module gigabitEthernet 0 / x / 0 kev sib kho cov lus txib yog cov cai EXEC hom lus txib siv los console rau hauv Ethernet hloov module los ntawm tus tswv router.
Koj yuav tsum tau console mus rau hauv lub hloov module thiaj li yuav configure nws. Txhawm rau console rau hauv qhov hloov pauv, koj yuav tsum teeb tsa tus IP chaw nyob ntawm lub nraub qaum sab hauv Gigabit Ethernet interface, uas yog, GE0/0/0 lossis GE0/2/0, txuas nrog rau qhov hloov pauv. Yog tias koj sim console rau hauv qhov hloov pauv yam tsis tau muab qhov chaw nyob IP, koj tau txais cov lus yuam kev hauv qab no:
Router1#service-module gigabitEthernet 0/2/0 ntu
IP chaw nyob yuav tsum tau teeb tsa ntawm lub interface GigabitEthernet0/2/0
Txhawm rau nkag mus rau qhov hloov pauv ntawm tus tswv tsev router:
| txib | Lub hom phiaj | |
| Kauj ruam 1 | Router> pab | Nkag mus rau hauv Cisco CGR 2010 router hauv EXEC hom muaj cai.
Sau koj tus password yog tias tau txais kev ceeb toom. |
| Kauj ruam 2 | Router# qhia khiav interface gigabitethernet0//0 | Qhia txog kev khiav haujlwm ntawm lub router, uas yuav tsum muaj Gigabit Ethernet interface sawv cev rau qhov hloov pauv. |
| Kauj ruam 3 | Router# configure lub davhlau ya nyob twg | Nkag mus rau hom kev teeb tsa thoob ntiaj teb. |
| Kauj ruam 4 | Router (config)# interface gigabit Ethernet 0 /<qhov>/0 | Nkag mus rau interface configuration hom, thiab qhia txog Gigabit interface siv los nkag mus rau qhov hloov pauv. |
| Kauj ruam 5 | Router (config-yog) # ip chaw
20.0.0.1 |
Configures tus IP chaw nyob thiab subnet daim npog qhov ncauj rau lub interface. |
| Kauj ruam 6 | Router (config-yog) # tsis muaj kev kaw | Enables qhov hloov module chaw nres nkoj. |
| Kauj ruam 7 | Router (config-yog) # kawg | Rov qab mus rau txoj cai EXEC hom. |
| Kauj ruam 8 | Router # kev pabcuam-module
<interface><qhov / subslot / chaw nres nkoj > ntu Example: Router> service-module gigabitethernet0/<qhov>/0 ntu |
Tsim ib qho kev sib tham los ntawm router hla lub backplane Gigabit Ethernet interface mus rau qhov hloov module. |
| Kauj ruam 9 | Hloov # | Tom qab koj execute lub kev pabcuam-module <interface> kev sib tham hais kom ua, qhov hloov module tam sim ntawd tshwm thiab koj muaj tag nrho nkag mus rau qhov hloov module. |
Disconnecting los ntawm Hloov Module
Txhawm rau txiav tawm ntawm qhov hloov pauv thiab rov qab mus rau tus tswv Cisco CGR 2010 router:
| txib | Lub hom phiaj | |
| Kauj ruam 1 | Hloov> enable | Nkag mus rau txoj cai EXEC hom ntawm qhov hloov module. |
| Kauj ruam 2 | Hloov # qhia ip interface luv luv | Qhia qhov luv luv version ntawm cov ntaub ntawv hloov module configuration. |
| txib | Lub hom phiaj | |
| Kauj ruam 3 | Hloov # x | Xov XwmCtrl + Ua haujlwm + 6>, ces nias x.
Cov kab ke no xa rov qab rau koj mus rau lub router console thaum khaws lub console kev sib ntsib mus rau qhov hloov pauv hloov tsis tu ncua thiab tom qab ntawd tawm ntawm lub console mus rau qhov hloov pauv. |
| Kauj ruam 4 | Router# txiav tawm | Terminates qhov kev sib kho console mus rau qhov hloov module. |
| Kauj ruam 5 | Router# | Xovxwm Nkag mus kom paub meej tias lub disconnect. |
| Kauj ruam 6 | Router# service-module gigabit ethernet 0/0/0 xwm txheej | Qhia txog cov xwm txheej ntawm tag nrho cov khoom tseem ceeb ntawm qhov hloov module. Rau example tso zis, saib "Service-Module Command Syntax" ntu hauv Tshooj 3, "Kev nkag mus rau Hloov Module Los Ntawm Tus Tswv Router" hauv Cisco 2010 Txuas Daim phiaj Ethernet Hloov Module Interface Card Software Configuration Guide. |
Txuas Devices mus rau Hloov Module
Tshooj lus no piav qhia yuav ua li cas txuas ntau yam khoom siv mus rau qhov hloov pauv module chaw nres nkoj.
Tswv yim
Yog tias koj tsis tuaj yeem ncav cuag lub bale-clasp kov nrog koj cov ntiv tes thaum tshem RJ-45 lossis SFP cables los ntawm kev hloov pauv, siv cov cuab yeej ncaj uas muab los maj mam tso tus bale-clasp kov.
- 10/100BASE-T Ports, nplooj 4-4
- SFP Module Slots, nplooj 4-5
- Dual-Purpose Port nrog RJ-45 thiab SFP Connectors, nplooj 4-7
- Dual-Purpose Port nrog RJ-45 thiab SFP Connectors, nplooj 4-7
10/100BASE-T Ports
Ua raws li cov kauj ruam no los txuas rau 10/100BASE-T cov chaw nres nkoj:
- Kauj Ruam 1 Thaum koj txuas rau servers, chaw ua haujlwm, IP xov tooj, wireless nkag mus rau cov ntsiab lus, thiab routers, siv ib qho ncaj-dhau, twisted plaub-pair, Qeb 5 cable los txuas rau 10/100BASE-T RJ-45 connector.
Siv lub crossover, twisted plaub-pair, Qeb 5 cable thaum koj txuas rau lwm cov keyboards, hubs, los yog repeaters.
Nco ntsoov Thawj plaub qhov chaw nres nkoj 10/100BASE-T ntawm GRWIC-D-ES-2S-8PC hloov module muaj PoE + muaj peev xwm. Saib Cisco Connected Grid Ethernet Hloov Module Interface Card Software Configuration Guide rau cov lus qhia ntxiv.
Daim duab 4-1 RJ-45 Ports
- Kauj ruam 2 Txuas lub cable rau RJ-45 chaw nres nkoj ntawm lwm lub cuab yeej.
Nco ntsoov Qhov tsis siv neeg nruab nrab-nyob ntawm kev sib tshuam crossover (auto-MDIX) feature tau qhib los ntawm lub neej ntawd. Qhov hloov mus kuaj pom cov kab uas xav tau rau kev sib txuas tooj liab Ethernet thiab teeb tsa cov kev sib tshuam. Koj tuaj yeem siv ib qho crossover lossis ib txoj kab ncaj nraim rau kev sib txuas rau 10/100/1000 RJ-45 chaw nres nkoj ntawm qhov hloov pauv, tsis hais hom kev sib txuas.
SFP Module Slots
Qhov hloov module muab ob lub 100/1000 Mb/s los yog Gigabit Ethernet SFP module qhov chaw nres nkoj: ib tus qauv Gigabit SFP module qhov nyob hauv nruab nrab (labeled GE0/2) thiab ib qho SFP module qhov rau qhov chaw nres nkoj dual lub hom phiaj nyob hauv qab (labeled GE0/1).
Txhawm rau txuas rau SFP module qhov:
- Kauj Ruam 1 Muab lub SFP module ntawm ob sab, thiab ntxig rau hauv SFP module qhov chaw nres nkoj kom txog thaum koj xav tias lub connector snap rau hauv qhov chaw.
Ceev faj Nco ntsoov tias SFP module nyob sab xis ua ntej sim ntxig SFP module rau hauv qhov.
Daim duab 4-2 SFP Module Ports
- Kauj ruam 2 Txuas lub SFP cable rau hauv SFP module qhov, thiab ntxig rau lwm lub cable kawg rau hauv lwm lub cuab yeej.
Daim duab 4-3 Txuas lub Cable rau hauv SFP Chaw nres nkoj
Rau cov lus qhia ntxaws txog kev txhim kho, tshem tawm, thiab txuas rau SFP modules, saib cov ntaub ntawv SFP modules.
Dual-Purpose Chaw nres nkoj nrog RJ-45 thiab SFP Connectors
Gigabit Ethernet chaw nres nkoj GE0/1 ntawm qhov hloov pauv module muaj ib khub ntawm ib qho RJ-45 connector (chaw nres nkoj saum toj kawg nkaus) thiab ib qho SFP module connector (chaw nres nkoj hauv qab).
Qhov chaw nres nkoj dual lub hom phiaj yog suav tias yog ib qho interface. Ob lub connectors tsis redundant interfaces - lub hloov module activates tsuas yog ib tug connector ntawm tus khub ntawm ib lub sij hawm.
Yog tias qhov chaw nres nkoj ob lub hom phiaj tau teeb tsa raws li media-hom RJ-45, qhov ceev ntawm kev sib txuas tuaj yeem raug teeb tsa los ntawm 10, 100 lossis 1000 Mb / s (10/100/1000BASE-T specifications). Qhov chaw ceev ceev yog ib txwm qhib rau AUTONEGOTIATION. Nws yuav cia li sib tham mus rau txhua yam ceev yog teem rau ntawm qhov kawg ntawm kev sib txuas.
Yog tias qhov chaw nres nkoj ob lub hom phiaj tau teeb tsa raws li media-hom SFP, qhov ceev yog nyob ntawm hom module koj siv, xws li 100FX lossis 1000BASE-X SFP module. Qhov chaw nres nkoj yuav cia li ntes cov module, thiab qhov ceev yog teem raws li hom xov xwm. Lwm qhov kawg ntawm kev sib txuas yuav tsum yog tib hom xov xwm txhawm rau tsim qhov txuas.
Nco tseg
Txawm tias thaum ua haujlwm ntawm 100 Mb / s, ob lub hom phiaj chaw nres nkoj (thiab SFP-tsuas yog module slots) siv tus ncej loj uas tau teeb tsa nrog lub kaw lus mtu jumbo thoob ntiaj teb kev teeb tsa. Los ntawm lub neej ntawd, ob lub hom phiaj ports thiab SFP-tsuas yog module slots yog network node interfaces (NNIs).
Los ntawm lub neej ntawd, tus hloov module dynamically xaiv lub dual-purpose chaw nres nkoj media hom uas thawj txuas. Txawm li cas los xij, koj tuaj yeem siv media-type interface configuration hais kom ua manually xaiv RJ-45 connector lossis SFP module qhov.
Nco tseg
Nyob rau hauv nws pib xaiv hom, yog tias ob qho tib si tooj liab thiab fiber-optic teeb liab tau pom ib txhij, qhov hloov module muab kev nyiam rau SFP hom. Rau cov ntaub ntawv teeb tsa, saib "Configuring a Dual-Purpose Port" nyob rau hauv Tshooj 8, "Configuring Interfaces," hauv Cisco 2010 Connected Grid Ethernet Hloov Module Interface Card Software Configuration Guide.
Cov duab hauv qab no qhia tau hais tias Ethernet cable txuas nrog RJ-45 connector ntawm ob lub hom phiaj chaw nres nkoj (GE0/1). Nws kuj qhia tau hais tias SFP cable txuas nrog tus qauv SFP module qhov (GE0/2).
Daim duab 4-4 Ethernet Cable txuas nrog RJ-45 Connector
Daim duab 4-5 qhia tau hais tias ob qho tib si connectors ntawm ob lub hom phiaj chaw nres nkoj siv. Nyob rau hauv rooj plaub no, nrog rau ob qho tib si RJ-45 cable thiab SFP module cable nyob rau hauv lawv cov GE0/1 ports, hloov module yuav muab siv rau SFP module qhov.
Daim duab 4-5 Dual-Purpose Connectors
Txheeb xyuas qhov chaw nres nkoj txuas
Tom qab koj txuas qhov hloov pauv module chaw nres nkoj thiab lwm yam khoom siv, qhov chaw nres nkoj LED hloov amber thaum lub hloov module tsim ib qhov txuas. Cov txheej txheem no yuav siv li 30 vib nas this, thiab tom qab ntawd LED hloov ntsuab. Yog hais tias lub LED kaw, lub hom phiaj ntaus ntawv tej zaum yuav tsis raug qhib, tej zaum yuav muaj teeb meem cable, los yog tej zaum yuav muaj teeb meem nrog lub adapter nyob rau hauv lub hom phiaj ntaus ntawv.
FAQ
Kuv yuav ua li cas yog tias qhov hloov pauv tsis ua haujlwm POST?
Yog hais tias qhov System LED ntsais ntsuab, tsis tig ntsuab, los yog tig daj daj, qhia tias POST ua tsis tiav, hu rau koj tus neeg sawv cev Cisco lossis tus muag khoom kom tau txais kev pab.
Kuv yuav daws teeb meem li cas yog tias qhov chaw nres nkoj LEDs tsis ntsuab tom qab 30 vib nas this?
Xyuas kom tseeb tias koj siv Cat 5 lossis Cat 6 cable, xyuas kom lub cable tsis puas, xyuas kom meej tias lwm yam khoom siv tau qhib, thiab sim pinging IP chaw nyob 169.250.0.1 txhawm rau txheeb xyuas kev sib txuas.
Cov ntaub ntawv / Cov ntaub ntawv
 |
CISCO CGR 2010 Txuas Daim phiaj Ethernet Hloov Module Interface Card [ua pdf] Phau ntawv qhia CGR 2010, 2010, CGR 2010 Connected Grid Ethernet Hloov Module Interface Card, CGR 2010, Txuas Grid Ethernet Hloov Module Interface Card, Ethernet Hloov Module Interface Card, Hloov Module Interface Card, Module Interface Card, Interface Card |