C PROX PN20 Access Control Proximity Reader
Cov ntaub ntawv khoom
Access Control Proximity Reader PN20
C Prox Ltd (inc Quantek) coj tuaj rau koj rau Access Control Proximity Reader PN20, compact, waterproof standalone programmable access control proximity reader rau 2000 tus neeg siv.Cov khoom los nrog infrared chaw taws teeb tswj, admin ntxiv daim npav, admin rho tawm daim npav, Cov neeg siv phau ntawv, tus kheej tapping screws, phab ntsa plugs, ntswj ntsia hlau, lub hnub qub diode thiab IN4004 (rau relay circuitprotection).
Daim ntawv teev npe
| Lub npe | Ntau | Lus hais |
|---|---|---|
| Tus nyeem ntawv nyob ze | 1 | |
| Infrared chaw taws teeb | 1 | |
| Admin add daim card | 1 | |
| Admin rho tawm daim card | 1 | |
| Cov neeg siv phau ntawv | 1 | |
| Self-tapping screws | 2 | |
| Phab ntsa ntsaws | 2 | |
| Ntsia hlau tsav tsheb | 1 | |
| Lub hnub qub diode | 1 | |
| IN4004 (rau relay tiv thaiv Circuit Court) | 1 |
Product Description
PN20 siv Atmel microprocessor kom ntseeg tau tias qhov ua tau zoo tshaj plaws hauv ib puag ncig, thiab lub zog hluav taws xob qis ua rau nws lub neej ua haujlwm ntev. Cov neeg siv tuaj yeem ntxiv thiab tshem tawm ntawm daim npav admin ua rau nws yooj yim heev rau kev khiav lag luam. Cov chaw taws teeb tswj infrared tso cai rau kev hloov pauv sai sai, suav nrog kev hloov pauv lub sijhawm relay.
Khoom nta
- Compact thiab waterproof standalone nkag mus tswj qhov sib thooj nyeem ntawv
- Nws tuaj yeem khaws txog 2000 tus neeg siv
- Siv Atmel microprocessor kom ntseeg tau tias qhov ua tau zoo tshaj plaws hauv txhua qhov chaw
- Tsawg hluav taws xob Circuit Court prolongs nws lub neej kev pab cuam
- Cov neeg siv tuaj yeem ntxiv thiab tshem tawm ntawm daim npav admin
- Infrared chaw taws teeb tswj tso cai rau kev hloov pauv sai sai, suav nrog kev hloov pauv lub sijhawm relay
Khoom Specifications
- Kev khiav hauj lwm voltage: 9-24 Vdc
- Tus neeg siv muaj peev xwm: 2000
- Kev noj zaub mov zoo: N / A
- Kev siv hluav taws xob: N / A
- Daim npav nyeem nrug: N / A
- Zaus: N / A
- Ua haujlwm kub: N / A
- Kev khiav dej num: N / A
- Xauv cov zis load: N / A
- Waterproof: Yog
- Qhov Loj: N / A
Cov lus qhia siv khoom
- Nyeem cov neeg siv phau ntawv ua tib zoo ua ntej txhim kho chav tsev.
- Xyuas kom meej tias tag nrho cov ntsiab lus ntawm cov npe ntim khoom muaj nyob. Yog tias muaj dab tsi ploj lawm, ceeb toom rau tus neeg muag khoom tam sim ntawd.
- Txuas tus nyeem ntawv sib thooj rau lub zog ntawm 9-24Vdc.
- Ntxiv lossis tshem tawm cov neeg siv siv daim npav admin muab.
- Siv cov chaw taws teeb tswj infrared kom hloov chaw sai sai, suav nrog hloov lub sijhawm relay.
- Mount tus nyeem ntawv sib thooj uas siv tus kheej tapping screws thiab phab ntsa plugs muab.
- Xyuas kom meej tias cov khoom raug ntsia rau hauv qhov chaw qhuav thiab nyab xeeb.
Thov nyeem phau ntawv ua tib zoo ua ntej txhim kho chav tsev no
Cov ntawv ntim khoom
| Lub npe | Ntau | Lus hais |
| Tus nyeem ntawv nyob ze | 1 | |
| Infrared chaw taws teeb | 1 | |
| Admin add daim card | 1 | |
| Admin rho tawm daim card | 1 | |
| Cov neeg siv phau ntawv | 1 | |
| Self-tapping screws | 2 | Φ3.5mm × 27mm, siv los kho |
| Phab ntsa ntsaws | 2 | |
| Ntsia hlau tsav tsheb | 1 | Lub hnub qub |
| Diode | 1 | IN4004 (rau relay tiv thaiv Circuit Court) |
Thov xyuas kom meej tias tag nrho cov ntsiab lus saum toj no raug. Yog tias muaj dab tsi ploj, thov ceeb toom rau peb tam sim
Kev piav qhia
Lub PN20 yog ib qho compact, waterproof standalone programmable nkag mus tswj qhov sib thooj nyeem ntawv mus txog 2000 cov neeg siv. Nws siv Atmel microprocessor kom ntseeg tau tias qhov ua tau zoo tshaj plaws nyob rau hauv ib puag ncig, thiab lub zog hluav taws xob qis ua rau nws lub neej ua haujlwm ntev. Cov neeg siv tuaj yeem ntxiv thiab tshem tawm ntawm daim npav admin ua rau nws yooj yim heev rau kev khiav lag luam. Cov chaw taws teeb tswj infrared tso cai rau kev hloov pauv sai sai, suav nrog hloov lub sijhawm relay.
Nta
- Zinc alloy, anti-vandal hmoov coated vaj tse
- Waterproof, ua raws li IP66
- Muab nrog 50cm cable
- Muaj peev xwm nco, 2000 cov neeg siv
- Infrared chaw taws teeb tswj thiab tswj daim npav rau kev ua haujlwm
- Liab, daj thiab ntsuab LEDs qhia txog kev ua haujlwm
- Pulse hom lossis toggle hom
- Kho qhov rooj xauv lub sijhawm
- Ua nyob rau hauv lub teeb nyob ntawm tus resistor (LDR) rau anti-tamper
Specification
| Kev khiav hauj lwm voltage | 9-24 Vdc ib |
| Cov neeg siv muaj peev xwm | 2000 |
| Kev noj zaub mov zoo | <40mA |
| Kev siv tau | <100mA |
| Daim npav nyeem nyob deb | 3-5 cm |
| Ntau zaus | 125 KHz |
| Ua haujlwm kub | -40 rau 60 ⁰C |
| Ua haujlwm av noo | 0% txog 98% |
| Xauv tso zis load | 2A |
| Waterproof | IP66 |
| Qhov ntev | 103 x 48 x 19 mm |
Kev teeb tsa
- Tshem cov phaj rov qab los ntawm tus nyeem ntawv siv kev ruaj ntseg tsav tsheb thiab siv nws los khij ob qhov kho qhov thiab ib lub qhov cable.
- Laum lub cable thiab kho qhov.
- Ruaj ntseg rov qab phaj rau phab ntsa siv kho screws thiab plugs muab.
- Xov xov cable los ntawm lub qhov thiab txuas cov xov hlau uas xav tau, qhwv cov xov hlau tsis siv nrog cov kab xev insulating kom tiv thaiv luv luv.
- Haum tus nyeem ntawv rau hauv qab phaj thiab hloov cov ntsia hlau tuav.
Kev xaim
| Xim | Muaj nuj nqi | Kev piav qhia |
| Liab | 12/24V + | 12/24V + DC tswj fais fab input |
| Dub | GND | 12/24V - DC tswj fais fab input |
| Dawb | TSIS MUAJ | Relay nquag qhib |
| Xim av | COM | Relay feem ntau |
| Ntsuab | NC | Relay ib txwm kaw |
| Daj | Qhib | Tawm khawm |
Xauv
Nruab IN4004 diode hla lub xauv +V thiab -V
Rooj vag, qhov rooj, thiab lwm yam. 
Hoobkas pib dua
Tua lub hwj chim rau lub unit. Nias thiab tuav lub khawm tawm thaum lub zog lub zog. Yuav muaj 2 beeps thiab LED yuav tig daj, tso lub pob tawm. Tom qab ntawd nyeem ob daim npav 125KHz, thawj daim npav yuav yog tus tswv ntxiv daim npav, daim npav thib ob yuav yog daim npav rho tawm tus tswv, LED yuav tig liab thiab rov pib ua tiav. Tus tswv code tam sim no tau rov pib dua rau 123456, thiab lub Hoobkas pib teeb tsa tau rov qab los.
Nco tseg: Cov neeg siv cov ntaub ntawv yuav tsis raug muab tshem tawm thaum ua lub Hoobkas pib dua.
Suab & lub teeb qhia
| Kev ua haujlwm | LED qhov taw qhia | Buzzer |
| Standby | Liab | |
| Nkag mus rau programming hom | Liab flashing maj mam | Ib beep |
| Nyob rau hauv lub programming zaub mov | Daj | Ib beep |
| Kev ua haujlwm yuam kev | Peb lub suab nrov | |
| Tawm hauv qhov programming hom | Liab | Ib beep |
| Qhov rooj xauv | Ntsuab | Ib beep |
| Tswb | Liab flashing sai | Tswb |
Programming
Nws raug nquahu kom khaws cov ntaub ntawv ntawm Tus Neeg Siv Khoom ID thiab tus lej daim npav kom tso cai rau tus neeg rho tawm ntawm daim npav yav tom ntej, saib nplooj ntawv kawg.
Ntxiv thiab rho tawm cov neeg siv los ntawm daim npav master
Ntxiv cov neeg siv
Nyeem tus tswv ntxiv daim npav Nyeem daim npav tus neeg siv thib 1 Nyeem daim npav thib 2… nyeem tus tswv ntxiv daim npav dua
Daim npav yuav raug muab xa mus rau tus neeg siv tus ID tom ntej
Rho tawm cov neeg siv
Nyeem daim npav tus tswv rho tawm Nyeem daim npav thib 1 Tus neeg siv nyeem daim npav thib 2… Nyeem daim npav tus tswv rho tawm dua
Programming nrog infrared programmer
Thov nco ntsoov lub receiver infrared nyob ze ntawm LED yog li thov taw tes rau tus programmer nyob ntawd.
Teem ib tug tshiab master code
| 1. Nkag mus rau hom programming | * Master code #
123456 yog default master code |
| 2. Hloov tus lej lej | 0 Tshiab Master code # Tshiab Master code #
Admin code yog 6 tus lej |
| 3. Tawm hauv qhov programming hom | * |
Ntxiv cov neeg siv daim npav
| 1. Nkag mus rau hom programming | * Master code #
123456 yog default master code |
| 2. Ntxiv ib tus neeg siv daim npav (txoj kev 1)
Tus nyeem ntawv yuav cia li muab daim npav rau tus neeg siv tus lej ID tom ntej |
1 Nyeem daim npav #
Daim npav tuaj yeem muab ntxiv txuas ntxiv yam tsis tas yuav tawm hauv lub hom phiaj |
| 2. Ntxiv ib tus neeg siv daim npav (txoj kev 2)
Nyob rau hauv txoj kev no tus neeg siv tus lej ID yog faib rau ib daim npav. Tus lej ID yog tus lej ntawm 1 & 2000. Tsuas yog ib tus neeg siv tus lej ID rau ib daim npav. |
1 Tus Neeg Siv ID # Nyeem daim npav #
Daim npav tuaj yeem muab ntxiv txuas ntxiv yam tsis tas yuav tawm hauv lub hom phiaj |
| 2. Ntxiv ib tus neeg siv daim npav (txoj kev 3)
Nyob rau hauv txoj kev no daim npav yog ntxiv los ntawm 8 lossis 10 tus lej daim npav tus lej luam tawm ntawm daim npav. Tus neeg siv tus lej ID raug muab tso tseg. |
1 Daim npav #
Daim npav tuaj yeem muab ntxiv txuas ntxiv yam tsis tas yuav tawm hauv lub hom phiaj |
| 2. Ntxiv thaiv ntawm daim npav ua ntu zus
Tso cai rau tus neeg saib xyuas ntxiv txog 2000 daim npav nrog cov lej ua ntu zus rau tus nyeem ntawv hauv ib kauj ruam. Yuav siv sijhawm li 3 feeb rau qhov program. |
1 Tus neeg siv tus lej ID # Daim npav ntau # Thawj Daim npav # |
| 3. Tawm hauv qhov programming hom | * |
Rho tawm cov neeg siv daim npav
| 1. Nkag mus rau hom programming | * Master code #
123456 yog default master code |
| 2. Rho tawm tus neeg siv daim npav los ntawm daim npav | 2 Nyeem daim npav #
Daim npav tuaj yeem raug tshem tawm tsis tu ncua yam tsis tau tawm ntawm kev ua haujlwm hom |
| 2. Rho tawm tus neeg siv daim npav los ntawm tus neeg siv tus lej ID
Qhov kev xaiv no tuaj yeem siv tau thaum ib tus neeg poob lawv daim npav |
2 Tus neeg siv tus lej ID #
Daim npav tuaj yeem raug tshem tawm tsis tu ncua yam tsis tau tawm ntawm kev ua haujlwm hom |
| 2. Rho tawm tus neeg siv daim npav los ntawm daim npav naj npawb
Qhov kev xaiv no tuaj yeem siv tau thaum ib tus neeg poob lawv daim npav |
2 Daim npav #
Daim npav naj npawb yog 8/10 tus lej luam tawm ntawm daim npav. Daim npav tuaj yeem raug tshem tawm tsis tu ncua yam tsis tau tawm ntawm kev ua haujlwm hom |
| 2. Rho tawm tag nrho cov neeg siv | 2 Master code # |
| 3. Tawm hauv qhov programming hom | * |
Teem relay configuration
| 1. Nkag mus rau hom programming | * Master code #
123456 yog default master code |
| 2. Pulse hom
OR 2. Latch hom |
3 1-99 #
Lub sij hawm relay yog 1-99 vib nas this. (1 sib npaug 50mS). Default yog 5 vib nas this.
3 # Nyeem daim card uas siv tau, relay keyboards. Nyeem daim npav siv tau dua, relay hloov rov qab. |
| 3. Tawm hauv qhov programming hom | * |
Teem lub tswb nrov tawm tsam
Lub tswb nrov tawm tsam yuav koom nrog tom qab 10 daim npav ua tsis tiav. Factory default yog OFF. Nws tuaj yeem raug teeb tsa kom tsis kam nkag rau 10 feeb lossis qhib tus nyeem ntawv lub tswb.
| 1. Nkag mus rau hom programming | * Master code #
123456 yog default master code |
| 2. Kev tawm tsam tawm
OR 2. Kev tawm tsam ON OR 2. Strike-out ON (Tswb) Teem lub sij hawm tswb |
4 #
Tsis muaj tswb los yog xauv tawm (default hom)
4 # Kev nkag yuav raug tsis kam lees rau 10 feeb
4 # Cov cuab yeej yuav ceeb toom rau lub sijhawm teev hauv qab no
5 0-3 # 0-3 yog lub sijhawm hauv feeb. Default yog 1 feeb. Sau tus lej lej # lossis nyeem daim npav siv tau kom ntsiag to |
| 3. Tawm hauv qhov programming hom | * |
Teem lub suab thiab pom cov lus teb
| 1. Nkag mus rau hom programming | * Master code #
123456 yog default master code |
| 2. Tswj LED
Disable tswj LED
Ua kom tswj tau LED (default) |
6 # Tswj LED qhov taw qhia tawm hauv standby hom (tseem nyob rau thaum nyob rau hauv lub programming thiab thaum ib daim card siv tau yog nyeem) 6 # Tswj LED qhov taw qhia nyob rau hauv hom standby (default) |
| 2. Lub suab
Disable buzzer
Qhib buzzer (default) |
6 # Tsis muaj buzzer thaum daim npav nyeem (tseem buzzes thaum programming, tab sis tsis yog thaum tawm hauv programming) 6 # Buzzer suab thaum daim npav nyeem (default) |
| 3. Tawm hauv qhov programming hom | * |
Cov neeg siv kev ua haujlwm
Kom qhib lub qhov rooj:
Nyeem daim npav siv tau
Txhawm rau tua lub tswb:
Nyeem daim npav siv tau lossis sau tus lej lej #
Daim ntawv pov thawj
Nws raug nquahu kom khaws cov ntaub ntawv (zoo tagnrho digitally) ntawm Tus Neeg Siv Khoom ID thiab tus lej daim npav kom tso cai rau tus neeg rho tawm ntawm daim npav yav tom ntej.
| Qhov chaw | Qhov chaw ntawm qhov rooj |
| Daim npav / fob naj npawb | Tus neeg siv tus lej ID | Tus neeg siv lub npe | Hnub tim |
C Prox Ltd (Inc Quantek)
- Unit 11 Callywhite Business Park, Callywhite Lane, Dronfield, S18 2
- XP +44(0)1246 417113
- sales@cproxltd.com
- www.quantek.co.uk
- Access Control Proximity Reader
Cov ntaub ntawv / Cov ntaub ntawv
 |
C PROX PN20 Access Control Proximity Reader [ua pdf] Tus neeg siv phau ntawv PN20 Access Control Proximity Reader, PN20, Access Control Proximity Reader, Control Proximity Reader, Proximity Reader, Nyeem Ntawv |